Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Stability of the polar wind

The classical polar wind is an ambipolar outflow of thermal plasma from the terrestrial ionosphere at high latitudes. At altitudes above about 3000 km, the H(+) flow becomes supersonic and collisionless, and the H(+) velocity distribution becomes non-Maxwellian. The non-Maxwellian features include a temperature anisotropy, with the parallel H(+) temperature greater than the perpendicular temperature, and an asymmetry, with an elongated tail in the upward direction. These distortions from a Maxwellian increase as the H(+) gas escapes in the diverging geomagnetic field, and at 10 earth radii, the parallel-to-perpendicular temperature ratio is about 50 and the elongated tail is sufficiently long to move the drift velocity point off the peak of the distribution function. The stability of these highly non-Maxwellian H(+) velocity distributions was studied with regard to the excitation of electrostatic waves, and the plasma was found to be remarkably stable for a wide range of electron temperatures. This indicates that the various macroscopic formulations of the classical polar wind are valid. The stability of a perpendicularly heated polar wind was also studied, assuming bulk perpendicular heating of H(+) in the cusp, followed by the subsequent convection of the heated plasma into the polar cap. Two regions of instability were found.

Barakat, A. R.↗

VLA observations of a solar noise storm

The first Very Large Array (VLA) observations of the sun at 92 cm wavelength (328 MHz) are presented. A 3-hr solar noise storm was detected; it consisted of burst-like spikes superimposed on a slowly varying background, and both storm components were 95 + or - 5 percent right-hand circularly polarized. A long duration soft X ray event preceeded the radio radiation by 30 m, suggesting a disturbance moving outwards at a velocity of v = 78 km/s. The 92 cm noise storm was resolved with an angular resolution of 9 sec for time intervals as short as 13 s. During the onset and early phases, the storm consisted of four compact sources, each with an angular diameter of 40 sec, oriented within an elongated source with angular dimensions of 40 sec by 200 sec. During the subsequent hour the most intense emission was located in two 40 sec sources separated by 100 sec. Snapshot maps revealed a persistent elongated source ta successive Peaks, with a scatter in the source position. A systematic position shift of Delta Theta sub I greater than or = 15 sec can be produced by the earth's ionoshere, but these effects can be removed by frequent observations of a nearby calibrator source. The observations confirm previously reported trends for a decrease in source size at higher frequencies, but they suggest a hitherto unresolved complexity in source structure.

Lang, Kenneth R.↗

Role of calcium in gravity perception of plant roots

Calcium ions may play a key role in linking graviperception by the root cap to the asymmetric growth which occurs in the elongation zone of gravistimulated roots. Application of calcium-chelating agents to the root cap inhibits gravitropic curvature without affecting growth. Asymmetric application of calcium to one side of the root cap induces curvature toward the calcium source, and gravistimulation induces polar movement of applied (Ca-45)(2+) across the root cap toward the lower side. The action of calcium may be linked to auxin movement in roots since: (1) auxin transport inhibitors interfere both with gravitropic curvature and graviinduced polar calcium movement and (2) asymmetric application of calcium enhances auxin movement across the elongation zone of gravistimulated roots. Indirect evidence indicates that the calcium-modulated regulator protein, calmodulin, may be involved in either the transport or action of calcium in the gravitropic response mechanism of roots.

Evans, Michael L.↗

An integral sunshade for optical reception antennas

Optical reception antennas (telescopes) must be capable of receiving communications even when the deep-space laser source is located within a small angle of the Sun. Direst sunlight must not be allowed to shine on the primary reflector of an optical reception antenna, because too much light would be scattered into the signal detectors. A conventional sunshade that does not obstruct the antenna aperture would have to be about five times longer than its diameter in order to receive optical communications at a solar elongation of 12 degrees without interference. Such a long sunshade could not be accommodated within the dome of any existing large-aperture astronomical facility, and providing a new dome large enough would be prohibitively expensive. It is also desirable to reduce the amount of energy a space-based large-aperture optical reception facility would expend orienting a structure with such a sizable moment of inertia. Since a large aperture optical reception antenna will probably have a hexagonally segmented primary reflector, a sunshade consisting of hexagonal tubes can be mounted in alignment with the segmentation without producing any additional geometric obstruction. An analysis of the duration and recurrence of solar-conjunction communications outages (caused when a deep-space probe near an outer planet appears to be closer to the Sun than a given minimum solar elongation), and the design equations for the integral sunshade are appended.

Kerr, E. L.↗

The structure of sheared turbulence near a plane boundary

An analysis is presented of how a plane boundary affects the structure of turbulence in a sheared free stream. A uniform-shear boundary layer (USBL) is formulated with slip velocity condition at the surface, and inhomogeneous rapid distortion theory is applied. The effects of blocking by the surface on the turbulence structure in USBL is compared with those in the shear-free boundary layer (SFBL). Shear produces highly anisotropic eddies elongated in the flow direction. The vertical velocity variance is reduced with shear at all heights, roughly in proportion to the reduction in the homogeneous value, but the shape of the profile remains unchanged only near the surface. The streamwise integral scales increase with shear, indicating elongation of the streamwise extent of eddies.

Lee, Moon J.↗

Radio structure at 8.4 GHz in Sagittarius A, the compact radio source at the Galactic center

VLBI observations of the compact, nonthermal radio source at the Galactic center show it to be elongated at 8.4 GHz along a position angle of 82 + or - 6 deg. The source has an axial ratio of 0.53 + or - 0.10 with a major axis of 17.4 + or - 0.5 mas. Examination of VLA maps of the Galactic center region indicate no obvious alignment with this smaller-scale elongation of the nuclear region, nor is the nuclear position angle aligned with the axis of Galactic rotation. Comparison with the size measured at frequencies from 1 to 22 GHz shows that the size follows very closely the lambda-squared dependence expected from interstellar scattering. The alongated nature of the source implies either that the scattering medium is anisotropic or that some remnant of the intrinsic structure remains visible through the scattering medium.

Jauncey, David L.↗

The Mechanisms of Dispersion Strengthening and Fracture in Al-based XD (TM) Alloys

The influence of reinforcement size, volume fraction, and matrix deformation behavior on room and elevated temperature strength, and the fracture toughness of metal matrix composites of both pure aluminum and Al(4 percent)Cu(1.5 percent)Mg with 0 to 15 vol percent TiB2 were examined. Higher TiB2 volume fractions increased the tensile yield strength both at room and elevated temperatures, and reduced the elongation to fracture. Tensile tests also indicate that small particles provided a greater increase in strength for a given volume fraction than larger particles, whereas elongation to fracture appeared to be insensitive to reinforcement size. The fracture toughness of the Al(4 percent)Cu(1.5 percent)Mg alloys decreased rapidly with TiB2 additions of 0 to 5 vol percent and more slowly with TiB2 additions of 5 to 15 vol percent. Fracture toughness appears to be independent of TiB2 particle size. The isothermal-aging response of the precipitation strengthened Al(4 percent)Cu(1.5 percent)Mg alloys was not altered by the presence of TiB2.

Aiken, R. M., Jr.↗

3-D components of a biological neural network visualized in computer generated imagery. I - Macular receptive field organization

Computer-assisted, 3-dimensional reconstructions of macular receptive fields and of their linkages into a neural network have revealed new information about macular functional organization. Both type I and type II hair cells are included in the receptive fields. The fields are rounded, oblong, or elongated, but gradations between categories are common. Cell polarizations are divergent. Morphologically, each calyx of oblong and elongated fields appears to be an information processing site. Intrinsic modulation of information processing is extensive and varies with the kind of field. Each reconstructed field differs in detail from every other, suggesting that an element of randomness is introduced developmentally and contributes to endorgan adaptability.

Ross, Muriel D.↗

Superfiber For Strong, Light Fabrics

New ultrahigh-molecular-weight fiber offers major advantages as fabric for space suits, diving suits, sporting goods, sails, and ultralight aircraft. Polyolefin fiber has extremely high modulus of elasticity, low elongation, high specific strength, low specific gravity, resistance to chemicals, low moisture absorption, and high resistance to damage by flexure and abrasion. Consists of elongated, highly aligned, highly crystalline polyethylene molecules. Structure not only results in high strength-to-weight ratio but also gives high resistance to tearing and ripping. Fibers woven in many patterns. Offers combination of desirable properties not found in nylon, polyester, or aramid fabrics.

Dawn, Frederic S.↗

Probe insertion apparatus with inflatable seal

A sealing apparatus is disclosed for inserting a probe into a pressure vessel having an elongated opening includes a pair of resiliently deformable seals opposingly disposed in sealing engagement with each other. A retainer is connected to the pressure vessel around the elongated opening and holds the pair of seals rigidly to the pressure vessel. A wedge is engageable with the pair of seals and carries the probe, for longitudinally translating the probe in pressure vessel.

Trimarchi, Paul A.↗

The mechanisms of dispersion strengthening and fracture in Al-based XD(tm) alloys, part 1

The influence of reinforcement size, volume fraction, and matrix deformation behavior on room and elevated temperature strength; the fracture toughness; and the fatigue crack growth rate of metal matrix composites of Al-4(pct)Cu-1.5(pct)Mg with TiB2 were examined. The influence of reinforcement volume fraction was also examined for pure aluminum with TiB2. Higher TiB2 volume fractions increased the tensile yield strength at both room and elevated temperatures, and reduced the elongation to fracture. Tensile tests also indicate that small particles provided a greater increase in strength for a given volume fraction than larger particles, whereas elongation to fracture appeared to be insensitive to reinforcement size. Interparticle spacing appears to be the factor that controls the strength of these alloys, with the exact nature of the dependence relying on the nature of dislocation slip in the matrix (planar vs. diffuse). The isothermal aging response of the precipitation strengthened Al-4(pct)Cu-1.5(pct)Mg alloys was not accelerated by the presence of TiB2. Cold work prior to artificial aging created additional geometrically necessary dislocations which serve as heterogeneous nucleation sites leading to accelerated aging, a finer precipitate size, and an increase in the strength of the alloy.

Aikin, R. M., Jr.↗

Method for fastening aircraft frame elements to sandwich skin panels covering same using woven fiber connectors

This invention relates to improvements in the method by which elongate frame elements such as the spars in aircraft wings are fastened to the skin panels covering same where these skin pane]s are of the sandwich type having inner and outer facesheets with a core bonded therebetween, such method consisting of preparing the panel to receive its frame elements by cutting elongate grooves spanwise through the inner facesheet and the core therebeneath while leaving the outer facesheet intact; bridging the gap thus produced in the inner facesheet with one bundle of filaments adhesively bonded thereto, the latter being contained in a woven connector in the form of a strap or band running lengthwise of the groove, and this filament bundle farming an endless strand of yarn that is laid back and forth transversely across the gap in side-by-side parallel rows but which are parted at intervals for the side-by-side lays of at least one other similar yarn strand to pass therebetween in intersecting relation; adhesive]y-bonding the skin panel core exposed within the groove to one or both sides of the frame element located proximal thereto using two endless strands of yarn laid back and forth to define a pair of intersecting webs arranged in spaced substantially parallel relation to one another that form a part of the connector and pass through the spaces between the first-mentioned yarn strands.

Paul J Jonas↗

Bidirectional drive and brake mechanism

A space transport vehicle is disclosed as including a body which is arranged to be movably mounted on an elongated guide member disposed in outer space and driven therealong. A drive wheel is mounted on a drive shaft and arranged to be positioned in rolling engagement with the elongated guide carrying the vehicle. A brake member is arranged on the drive shaft for movement into and out of engagement with an adjacent surface of the drive wheel. An actuator is mounted on the body to be manually moved back and forth between spaced positions in an arc of movement. A ratchet-and-pawl mechanism is arranged to operate upon movements of the actuator in one direction between first and second positions for coupling the actuator to the drive wheel to incrementally rotate the wheel in one rotational direction and to operate upon movements of the actuator in the opposite direction for uncoupling the actuator from the wheel. The brake member is threadedly coupled to the drive shaft in order that the brake member will be operated only when the actuator is moved on beyond its first and second positions for shifting the brake member along the drive shaft and into frictional engagement with the adjacent surface on the drive wheel.

Swan, Scott A.↗

The symmetry surface of the zodiacal cloud outside the earth's orbit

The location in space of the symmetry surface of the zodiacal cloud at elongation angles 110-140 deg from the sun is determined from observations of the zodiacal light taken from the Pioneer 10 space probe, and from the zodiacal light experiment on Skylab. The inclination and ascending node of the symmetry surface from the ecliptic plane are shown to be about 1.2 and 23 deg, respectively, closest to those of the orbital plane of Mars. These results are consistent with those obtained from IRAS at elongation angle of 90 deg from the sun.

Misconi, Nebil Y.↗

Computer simulation in template-directed oligonucleotide synthesis

It is commonly assumed that template-directed polymerizations have played a key role in prebiotic evolution. A computer simulation that models up to 33 competing reactions was used to investigate the product distribution in a template-directed oligonucleotide synthesis as a function of time and concentration of the reactants. The study focuses on the poly(C)-directed elongation reaction of oligoguanylates, and how it is affected by the competing processes of hydrolysis and dimerization of the activated monomer, which have the potential of severely curtailing the elongation and reducing the size and yield of the synthesized polymers. The simulations show that realistic and probably prebiotically plausible conditions can be found where hydrolysis and dimerization are either negligible or where a high degree of polymerization can be attained even in the face of substantial hydrolysis and/or dimerization.

Kanavarioti, Anastassia↗

Lidar observations of banded convection during BLX83

Lidar observations of clear-air convection during the 1983 Boundary Layer Experiment (BLX83) reveal the presence of elongated, parallel regions of updrafts marked by enhanced aerosol backscattering. These linear (banded) aerosol structures were observed over a 2-hr period during a cloud-free morning. During this period, the depth of the convective boundary layer (CBL) increased from 100 to 1300 m. Wind speeds averaged over the depth of the CBL varied between 0 and 2 m/s, while the wind direction varied over a range of 160 deg. The CBL instability parameter, -Zi/L, increased from approximately 25 (weakly unstable) to 250 (strongly unstable). The spacings of the elongated, parallel plumes scaled with the CBL height. These findings suggest that secondary circulations in the form of horizontal roll vortices were present under conditions not normally associated with roll vortices. The lines of aerosol structures aligned much more closely (within 15 deg) with the direction of the vertical shear to the horizontal wind through the depth of the CBL than with either the surface wind, mean CBL wind, or the wind at an altitude of 1.1 Zi.

Ferrare, R. A.↗

IPS limits on very low frequency VLBI

The ability of a space-based radio interferometer array to make high resolution images at frequencies of only a few MHz will be limited by interplanetary scintillation. Numerical simulations have been used to study the severity of interferometer phase fluctuations caused by the density fluctuations in the solar wind over a range of frequencies and solar elongation angles. The impact of these fluctuations on the quality of radio images produced has also been investigated. The results show that, for baselines up to 100 km, accurate imaging should be possible when nu sin (epsilon/2) is equal to or greater than 2.5, where nu is the observing frequency in MHz and epsilon is the solar elongation angle.

Jones, Dayton L.↗

Integral sunshade for an optical reception antenna

Optical reception antennas (telescopes) must be capable of receiving communications even when the deep-space laser source is located within a small angle of the sun. Direct sunlight must not be allowed to shine on the primary reflector of an optical reception antenna, because too much light would be scattered into the signal detectors. A conventional sunshade that does not obstruct the antenna aperture would have to be about five times longer than its diameter in order to receive optical communications at a solar elongation of 12 degrees without interference. Such a long sunshade could not be accommodated within the dome of any existing large-aperture astronomical facility, and providing a new dome large enough would be prohibitively expensive. It is also desirable to reduce the amount of energy a space-based large-aperture optical reception facility would expend orienting a structure with such a sizable moment of inertia. Since a large aperture optical reception antenna will probably have a hexagonally segmented primary reflector, a sunshade consisting of hexagonal tubes can be mounted in alignment with the segmentation without producing any additional geometric obstruction. An analysis of the duration and recurrence of solar-conjunction communications outages (caused when a deep-space probe near an outer planet appears to be closer to the sun than a given minimum solar elongation), and the design equations for the integral sunshade are appended.

Kerr, Edwin L.↗