Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRON PLASMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Effect of surface produced secondary electrons on the sheath structure induced by high-power microwave window breakdown

Dielectric window breakdown, whose mechanism is not thoroughly understood, is a major factor of limiting the transmission and radiation of high-power microwave on the order of 1 GW. In this paper, a one-dimensional fluid-like sheath model is developed to investigate the sheath structures formed at different gas pressures. The dominant processes during the surface flashover are isolated by this model. In vacuum, electron multipactor is self-sustained by secondary electron emission, a positive space-charge potential is formed on the dielectric surface. With increasing gas pressure, electron-neutral ionization prevails against secondary electron emission. The multipactor effect is suppressed by the shielding of plasma electrons. This leads to the sheath potential changing gradually from a positive space-charge potential to a negative space-charge potential. For argon gas pressure lower than 14 Torr, the sheath is space charge limited. A potential minimum could be formed in front of the dielectric which traps secondary electrons emitted from the wall. With the higher argon gas pressure, the number density of ions becomes comparable to that of electrons, all surface produced electrons are accelerated toward the presheath region. Therefore, the normal sheath is formed and the resulting surface flashover on the dielectric surface becomes rf-driven volumetric breakdown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vacuum arc with a distributed cathode spot as a plasma source for plasma separation of spent nuclear fuel and radioactive waste

Results from experimental studies of a vacuum arc with a distributed cathode spot on the heated cathode are presented. Such an arc can be used as a plasma source for plasma separation of spent nuclear fuel and radioactive waste. The experiments were performed with a gadolinium cathode, the properties of which are similar to those of an uranium arc cathode. The heat flux from the plasma to the cathode (and its volt equivalent) at discharge voltages of 4-15 V and discharge currents of 44-81 A, the radial distribution of the emission intensity of gadolinium atoms and singly charged ions in the arc channel at a voltage of 4.3 V, and the plasma electron temperature behind the anode were measured. The average charge of plasma ions at arc voltages of 3.5-8 V and a discharge current of 52 A and the average rate of gadolinium evaporation in the discharge were also determined.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Wakefields generated by collisional neutrinos in neutral-electron-positron-ion plasma

A classical fluid description is adopted to investigate nonlinear interaction between an electron-type neutrino beam and a relativistic collisionless unmagnetized neutral-electron-positron-ion plasma. In this work, we consider the collisions of the neutrinos with neutrals in the plasma and study their effect on the generation of wakefields in presence of a fraction of ions in a neutral-electron-positron plasma. The results obtained in the present work are interpreted and compared with previous studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Upgrade of the JET far infrared interferometer diagnostic

In recent years there has been a major upgrade of the JET far infrared diagnostic system consisting of a new laser system with the wavelength at 118.8 {mu}m at and more advanced processing electronics for phase counting. This provides a second colour measurement of the electron plasma density on the vertical system. Due to the shorter wavelength, the plasma induced laser beam refraction is reduced by a factor of three alleviating density errors caused by loss of signal (so-called 'fringe jumps'[A. Murari et al., Rev. Sci. Instrum. 77, 073505 (2006)]), in particular during high performance plasmas experiments in JET.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Oblique modulation of ion-acoustic waves and envelope solitons in electron-positron-ion plasma

The effect of oblique modulation on the amplitude dynamics of ion-acoustic wave propagating in a collisionless electron-positron-ion plasma is investigated. Using Krylov-Bogoliubov-Mitropolsky (KBM) perturbation method, a nonlinear Schroedinger (NLS) equation is derived which governs the evolution of obliquely modulated ion-acoustic envelope excitations. It is found that the presence of positron component significantly modifies the stability domains for small angles of propagation with the direction of modulation. The stationary solutions of NLS equation, i.e., bright and dark envelope solitons, become narrower as the concentration of positron component increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatial measurements of electron energy distribution and plasma parameters in a weakly magnetized inductive discharge

Spatial characteristics of plasma parameters such as electron temperature, plasma density, plasma potential, and electron energy distribution (EED) were studied in inductively coupled plasma with an axial dc magnetic field. With dc magnetic field, the measured EEDs in the total electron energy scale are spatially coincided except cutting of the low electron energy part indicating the conserved non-local electron kinetics in an axial direction, even though the dc magnetic field is applied. Spatial distributions of the plasma densities at axial positions have almost same trends with various magnetic field strengths. We also discuss the reduction of the ambipolar potential along the axial direction as the applied magnetic field increased.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of Real-Time Software for Thomson Scattering Analysis at NSTX-U

The Thomson Scattering Diagnostic on the National Spherical Tokamak eXperiment Upgrade (NSTX-U) has been an essential system for many operational campaigns due to its function of measuring plasma electron density and temperature. Constructive feedback to improve the next plasma discharge, however, has been limited because of in-between shots analysis. Plasma Control, therefore, desires a diagnostic system that is real-time capable. This contribution presents the development of software that demonstrates the feasibility of a real-time Thomson Scattering diagnostic system for NSTX-U. The developed software is able to evaluate the electron temperature and density within 2.5ms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasi-periodic behavior of ion acoustic solitary waves in electron-ion quantum plasma

The ion acoustic solitary waves are investigated in an unmagnetized electron-ion quantum plasmas. The one dimensional quantum hydrodynamic model is used to study small as well as arbitrary amplitude ion acoustic waves in quantum plasmas. It is shown that ion temperature plays a critical role in the dynamics of quantum electron ion plasma, especially for arbitrary amplitude nonlinear waves. In the small amplitude region Korteweg-de Vries equation describes the solitonic nature of the waves. However, for arbitrary amplitude waves, in the fully nonlinear regime, the system exhibits possible existence of quasi-periodic behavior for small values of ion temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Arbitrary amplitude solitary and shock waves in an unmagnetized quantum dusty electron-positron-ion plasma

The behavior of quantum dust ion acoustic soliton and shocks in a plasma including inertialess quantum electrons and positrons, classical cold ions, and stationary negative dust grains are studied, using arbitrary amplitude approach. The effect of dissipation due to viscosity of ions is taken into account. The numerical analysis of Sagdeev potential for small value of quantum diffraction parameter (H) shows that for chosen plasma, only compressive solitons can exist and the existence domain of this type of solitons is decreased by increasing dust density (d). Additionally, the possibility of propagation of both subsonic and supersonic compressive solitons is investigated. It is shown that there is a critical dust density above which only supersonic solitons are observed. Moreover, increasing d leads to a reduction in the existence domain of compressive solitons and the possibility of propagation of rarefactive soliton is provided. So, rarefactive solitons are observed only due to the presence of dust particles in this model quantum plasma. Furthermore, numerical solution of governed equations for arbitrary amplitude shock waves has been investigated. It is shown that only compressive large amplitude shocks can propagate. Finally, the effects of plasma parameters on these structures are investigated. This research will be helpful in understanding the properties of dense astrophysical (i.e., white dwarfs and neutron stars) and laboratory dusty plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Upper limit power for self-guided propagation of intense lasers in plasma

It is shown that there is an upper-limit laser power for self-focusing of a laser pulse in plasma in addition to the well-known lower-limit critical power set by the relativistic effect. This upper limit is caused by the transverse ponderomotive force of the laser, which tends to expel plasma electrons from the laser propagating area. Furthermore, there is a lower-limit plasma density for a given laser spot size, below which self-focusing does not occur for any laser power. Both the lower-limit density and the upper-limit power are derived theoretically and verified by two-dimensional and three-dimensional particle-in-cell simulations. It is also found that plasma channels may be unfavorable for stable guiding of lasers above the upper-limit power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The plasma wake of mesosonic conducting bodies. I - An experimental parametric study of ion focusing by the plasma sheath

The experimental investigation considered is concerned with the deflection of ion streams resulting from the interaction of conducting test bodies with an unmagnetized, mesosonic (supersonic with respect to ions but subsonic with respect to electrons) plasma stream. The investigation is, therefore, limited to plasma-electrostatic interactions. The experimental conditions are similar to those of the spacecraft-ionospheric interaction in that the ionic mass and number density, the electron temperature, and the plasma drift velocity ranges include values appropriate for small satellites or diagnostic probes at 200 to 400 km altitude. The study provides direct observations of deflected ion streams for cylindrical test bodies and gives a detailed description of the effects of the governing, dimensionless parameter ratios obtained from the steady-state, nonmagnetic Maxwell-Vlasov system of equations.

Stone, N. H.↗

EVIDENCE FOR GENTLY SLOPING PLASMA DENSITY PROFILES IN THE DEEP CORONA: TYPE III OBSERVATIONS

Type III radio bursts are produced near the local electron plasma frequency f{sub p} and near its harmonic 2f{sub p} by fast electrons ejected from the solar active regions and moving through the corona and solar wind. The coronal bursts have dynamic spectra with frequency rapidly falling with time, the typical duration being about 1-3 s. In the present paper, 37 well-defined coronal type III radio bursts (25-450 MHz) are analyzed. The results obtained substantiate an earlier statement that the dependence of the central frequency of the emission on time can be fitted to a power-law model, f(t) {proportional_to} (t - t{sub 0}){sup -{alpha}}, where {alpha} can be as low as 1. In the case of negligible plasma acceleration and conical flow, it means that the electron number density within about 1 solar radius above the photosphere will decrease as r {sup -2}, like in the solar wind. For the data set chosen, the index {alpha} varies in the range from 0.2 to 7 or bigger, with mean and median values of 1.2 and 0.5, respectively. A surprisingly large fraction of events, 84%, have {alpha} {<=} 1.2. These results provide strong evidence that in the type III source regions the electron number density scales as n(r) {proportional_to} (r - r{sub 0}){sup -{beta}}, with minimum, mean, and median {beta} = 2{alpha} of 0.4, 2.4, and 1.0, respectively. Hence, the typical density profiles are more gently sloping than those given by existing empirical coronal models. Several events are found with a wind-like dependence of burst frequency on time. Smaller power-law indices could result from the effects of non-conical geometry of the plasma flow tubes, deceleration of coronal plasma, and/or the curvature of the magnetic field lines. The last effect is shown to be too weak to explain such low power-law indices. A strong tendency is found for bursts from the same group to have similar power-law indices, thereby favoring the hypothesis that they are usually produced by the same source region.

79 ASTRONOMY AND ASTROPHYSICS↗

Adiabatic behavior of an elliptical vortex in a time-dependent external strain flow

The adiabatic behavior of two-dimensional (2D) fluid vortices subject to slowly varying, time-dependent external strain flows is studied theoretically, and experimentally using magnetized non-neutral electron plasmas. Here the E × B drift dynamics of the electrons perpendicular to the magnetic field are analogous to the motion of fluid vorticity under the 2D Euler equations describing ideal fluids. A low-dimensional elliptical vortex patch model is used along with a WKB approximation to derive a formula for the breaking of an adiabatic invariant due to the changing external flow. The invariant is interpreted as the amplitude of a perturbative oscillation about a stable fixed point corresponding to a steady elliptical vortex. Smooth, hyperbolic tangent and piecewise linear ramp functions are considered for the external strain time dependence. Standard exponential breaking is observed in the former case, whereas the latter exhibits a power-law breaking curve with periodic modulation. It is found that a driving term in the equations of motion contributes the majority of the breaking whereas the frequency variation plays a weaker, but significant role. The experimental data agree closely with the theoretical model. The most significant deviation is due to inviscid damping behavior associated with the smooth edges of the experimental vortices, which tends to reduce the amplitude of the oscillation. Finally, the results are compared and contrasted with other related experimental, numerical, and theoretical work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma waves near Saturn - Initial results from Voyager 1

The Voyager 1 plasma wave instrument detected many familiar types of plasma waves during the encounter with Saturn, including ion-acoustic waves and electron plasma oscillations upstream of the bow shock, an intense burst of electrostatic noise at the shock, and chorus, hiss, electrostatic electron cyclotron waves, and upper hybrid resonance emissions in the inner magnetosphere. A clocklike Saturn rotational control of low-frequency radio emissions was observed, and evidence was obtained of possible control by the moon Dione. Strong plasma wave emissions were detected at the Titan encounter indicating the presence of a turbulent sheath extending around Titan, and upper hybrid resonance measurements of the electron density show the existence of a dense plume of plasma being carried downstream of Titan by the interaction with the rapidly rotating magnetosphere of Saturn.

Gurnett, D. A.↗

Ferroelectric opening switches for large-scale pulsed power drivers.

Fast electrical energy storage or Voltage-Driven Technology (VDT) has dominated fast, high-voltage pulsed power systems for the past six decades. Fast magnetic energy storage or Current-Driven Technology (CDT) is characterized by 10,000 X higher energy density than VDT and has a great number of other substantial advantages, but it has all but been neglected for all of these decades. The uniform explanation for neglect of CDT technology is invariably that the industry has never been able to make an effective opening switch, which is essential for the use of CDT. Most approaches to opening switches have involved plasma of one sort or another. On a large scale, gaseous plasmas have been used as a conductor to bridge the switch electrodes that provides an opening function when the current wave front propagates through to the output end of the plasma and fully magnetizes the plasma - this is called a Plasma Opening Switch (POS). Opening can be triggered in a POS using a magnetic field to push the plasma out of the A-K gap - this is called a Magnetically Controlled Plasma Opening Switch (MCPOS). On a small scale, depletion of electron plasmas in semiconductor devices is used to affect opening switch behavior, but these devices are relatively low voltage and low current compared to the hundreds of kilo-volts and tens of kilo-amperes of interest to pulsed power. This work is an investigation into an entirely new approach to opening switch technology that utilizes new materials in new ways. The new materials are Ferroelectrics and using them as an opening switch is a stark contrast to their traditional applications in optics and transducer applications. Emphasis is on use of high performance ferroelectrics with the objective of developing an opening switch that would be suitable for large scale pulsed power applications. Over the course of exploring this new ground, we have discovered new behaviors and properties of these materials that were here to fore unknown. Some of these unexpected discoveries have lead to new research directions to address challenges.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Parametric instabilities during electron cyclotron heating of tandem mirrors

Electron cyclotron resonance heating is one of the most commonly used methods of heating electrons in the plugs and in the thermal barriers of tandem mirrors. The intense coherent electromagnetic waves used for such heating are susceptible to parametric decay into other modes. Significant growth rates are found for the decay of either ordinary or extraordinary waves into two magnetized electron plasma waves. This and related effects may result in electron heating mechanisms rather different than those assumed in linear ray-tracing calculations. These results may help explain the unusual effects observed during heating of the Phaedrus tandem mirror device. In the general case, these instabilities may be strongly inhibited by density gradients.

Nicholson, D. R.↗

Environmental Exposure Conditions for Teflon FEP on the Hubble Space Telescope Investigated

The Hubble Space Telescope (HST) was launched into low Earth orbit on April 24,1990. During the first servicing mission in December 1993 (3.6 years after launch), multilayer insulation (MLI) blankets were retrieved from the two magnetic sensing systems located on the light shield. Retrieval of one of the solar arrays during this mission also provided MLI blanket material from the solar array drive arm. These MLI materials were analyzed in ground-based facilities, and results indicate that the space-facing outer layer of the MLI, aluminized Teflon FEP (DuPont; fluorinated ethylene propylene), was beginning to degrade. Close inspection of the FEP revealed through-the-thickness cracks in areas with the highest solar exposure and stress concentration. During the second servicing mission in February 1997 (6.8 years after launch), astronauts observed and documented severe cracking in the outer layer of the MLI blankets on both the solar-facing and anti-solar-facing surfaces. During this second mission, some material from the outer layer of the light shield MLI was retrieved and subsequently analyzed in ground-based facilities. After the second servicing mission, a Failure Review Board was convened by NASA Goddard Space Flight Center to address the MLI degradation problem on HST. Members of the Electro-Physics Branch of the NASA Glenn Research Center at Lewis Field participated on this board. To determine possible degradation mechanisms, board researchers needed to consider all environmental constituents to which the FEP MLI surfaces were exposed. On the basis of measurements, models, and predictions, environmental exposure conditions for FEP surfaces on HST were estimated for various time periods from launch in 1990 through 2010, the planned end-of-life for HST. The table summarizes these data including the number and temperature ranges of thermal cycles; equivalent Sun hours; fluence and absorbed radiation dose from solar event x rays; fluence and absorbed dose from solar wind protons and electrons trapped in Earth s magnetic field; fluence of plasma electrons and protons; and atomic oxygen fluence.

Dever, Joyce A.↗