Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Display type.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Overview of Neutrino Mixing Models and Their Mixing Angle Predictions

An overview of neutrino-mixing models is presented with emphasis on the types of horizontal flavor and vertical family symmetries that have been invoked. Distributions for the mixing angles of many models are displayed. Ways to differentiate among the models and to narrow the list of viable models are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Speculation of equilibrium pressure of Ti{sub 36}Zr{sub 40}Ni{sub 20}Pd{sub 4} icosahedral quasicrystal

Ti-Zr-Ni quasicrystals have been demonstrated to store a large number of hydrogen atoms, which implies strong potential application in hydrogen energy field for them. However, the desorption of hydrogen atoms in the quasicrystals is quite difficult, with the indication of high desorption temperature and slow desorption rate. The shortage limits their use in the field to a large extent. But this kind of quasicrystals might be used in nuclear fusion energy field, because tritium as a coral fuel for nuclear fusion needs tight storage. However, equilibrium pressure at room temperature of Ti-Zr-Ni quasicrystals, important for their application in fusion energy field, has not been clear yet. In this work, we designed a gas-solid reaction system with the pressure resolution of 10{sup −8}Pa and carried out hydrogen desorption investigation at different temperatures on Ti{sub 36}Zr{sub 40}Ni{sub 20}Pd{sub 4} icosahedral quasicrystal. Based on three Pressure-Composition-Temperature desorption curves, we speculate according to Van’t Hoff theory about hydrogen storage that its equilibrium pressure at room temperature could be at the magnitude of 10{sup −6}Pa, displaying good stability of hydrogen in the quasicrystal and also implying application prospects in fusion energy field for quasicrystals of this type.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ON THE 10 mum SILICATE FEATURE IN ACTIVE GALACTIC NUCLEI

The 10 mum silicate feature observed with Spitzer in active galactic nuclei (AGNs) reveals some puzzling behavior. It (1) has been detected in emission in type 2 sources, (2) shows broad, flat-topped emission peaks shifted toward long wavelengths in several type 1 sources, and (3) is not seen in deep absorption in any source observed so far. We solve all three puzzles with our clumpy dust radiative transfer formalism. Addressing (1), we present the spectral energy distribution (SED) of SST1721+6012, the first type 2 quasar observed to show a clear 10 mum silicate feature in emission. Such emission arises in models of the AGN torus easily when its clumpy nature is taken into account. We constructed a large database of clumpy torus models and performed extensive fitting of the observed SED. We find that the cloud radial distribution varies as r {sup -1.5} and the torus contains 2-4 clouds along radial equatorial rays, each with optical depth at visual approx60-80. The source bolometric luminosity is approx3 x 10{sup 12} L{sub sun}. Our modeling suggests that approx<35% of objects with tori sharing these characteristics and geometry would have their central engines obscured. This relatively low obscuration probability can explain the clear appearance of the 10 mum emission feature in SST1721+6012 together with its rarity among other QSO2. Investigating (2), we also fitted the SED of PG1211+143, one of the first type 1 QSOs with a 10 mum silicate feature detected in emission. Together with other similar sources, this QSO appears to display an unusually broadened feature whose peak is shifted toward longer wavelengths. Although this led to suggestions of non-standard dust chemistry in these sources, our analysis fits such SEDs with standard galactic dust; the apparent peak shifts arise from simple radiative transfer effects. Regarding (3), we find additionally that the distribution of silicate feature strengths among clumpy torus models closely resembles the observed distribution, and the feature never occurs deeply absorbed. Comparing such distributions in several AGN samples we also show that the silicate emission feature becomes stronger in the transition from Seyfert to quasar luminosities.

79 ASTRONOMY AND ASTROPHYSICS↗

CHANDRA DISCOVERY OF 10 NEW X-RAY JETS ASSOCIATED WITH FR II RADIO CORE-SELECTED AGNs IN THE MOJAVE SAMPLE

The Chandra X-ray Observatory has proven to be a vital tool for studying high-energy emission processes in jets associated with active galactic nuclei (AGNs). We have compiled a sample of 27 AGNs selected from the radio flux-limited MOJAVE (Monitoring of Jets in AGNs with VLBA Experiments) sample of highly relativistically beamed jets to look for correlations between X-ray and radio emission on kiloparsec (kpc) scales. The sample consists of all MOJAVE quasars that have over 100 mJy of extended radio emission at 1.4 GHz and a radio structure of at least 3'' in size. Previous Chandra observations have revealed X-ray jets in 11 of 14 members of the sample, and we have carried out new observations of the remaining 13 sources. Of the latter, 10 have X-ray jets, bringing the overall detection rate to {approx}78%. Our selection criterion, which is based on highly compact, relativistically beamed jet emission and large extended radio flux, thus provides an effective method of discovering new X-ray jets associated with AGNs. The detected X-ray jet morphologies are generally well correlated with the radio emission, except for those displaying sharp bends in the radio band. The X-ray emission mechanism for these powerful FR II (Fanaroff-Riley type II) jets can be interpreted as inverse Compton scattering off of cosmic microwave background photons by the electrons in the relativistic jets. We derive viewing angles for the jets, assuming a non-bending, non-decelerating model, by using superluminal parsec scale speeds along with parameters derived from the inverse Compton X-ray model. We use these angles to calculate best-fit Doppler and bulk Lorentz factors for the jets, as well as their possible ranges, which leads to extreme values for the bulk Lorentz factor in some cases. When both the non-bending and non-decelerating assumptions are relaxed the only constraints on the kpc-scale jet from the Chandra and Very Large Array observations are an upper limit on the viewing angle, and a lower limit on the bulk Lorentz factor.

79 ASTRONOMY AND ASTROPHYSICS↗

Rapidly-varying speed of sound, scale invariance and non-Gaussian signatures

We show that curvature perturbations acquire a scale invariant spectrum for any constant equation of state, provided the fluid has a suitably time-dependent sound speed. In order for modes to exit the physical horizon, and in order to solve the usual problems of standard big bang cosmology, we argue that the only allowed possibilities are inflationary (albeit not necessarily slow-roll) expansion or ekpyrotic contraction. Non-Gaussianities offer many distinguish features. As usual with a small sound speed, non-Gaussianity can be relatively large, around current sensitivity levels. For DBI-like lagrangians, the amplitude is negative in the inflationary branch, and can be either negative or positive in the ekpyrotic branch. Unlike the power spectrum, the three-point amplitude displays a large tilt that, in the expanding case, peaks on smallest scales. While the shape is predominantly of the equilateral type in the inflationary branch, as in DBI inflation, it is of the local form in the ekpyrotic branch. The tensor spectrum is also generically far from scale invariant. In the contracting case, for instance, tensors are strongly blue tilted, resulting in an unmeasurably small gravity wave amplitude on cosmic microwave background scales.

79 ASTRONOMY AND ASTROPHYSICS↗

Revertant mosaicism repairs skin lesions in a patient with keratitis-ichthyosis-deafness syndrome by second-site mutations in connexin 26

Revertant mosaicism (RM) is a naturally occurring phenomenon where the pathogenic effect of a germline mutation is corrected by a second somatic event. Development of healthy-looking skin due to RM has been observed in patients with various inherited skin disorders, but not in connexin-related disease. We aimed to clarify the underlying molecular mechanisms of suspected RM in the skin of a patient with keratitis-ichthyosis-deafness (KID) syndrome. The patient was diagnosed with KID syndrome due to characteristic skin lesions, hearing deficiency and keratitis. Investigation of GJB2 encoding connexin (Cx) 26 revealed heterozygosity for the recurrent de novo germline mutation, c.148G > A, p.Asp50Asn. At age 20, the patient developed spots of healthy-looking skin that grew in size and number within widespread erythrokeratodermic lesions. Ultra-deep sequencing of two healthy-looking skin biopsies identified five somatic nonsynonymous mutations, independently present in cis with the p.Asp50Asn mutation. Functional studies of Cx26 in HeLa cells revealed co-expression of Cx26-Asp50Asn and wild-type Cx26 in gap junction channel plaques. However, Cx26-Asp50Asn with the second-site mutations identified in the patient displayed no formation of gap junction channel plaques. We argue that the second-site mutations independently inhibit Cx26-Asp50Asn expression in gap junction channels, reverting the dominant negative effect of the p.Asp50Asn mutation. Finally to our knowledge, this is the first time RM has been reported to result in the development of healthy-looking skin in a patient with KID syndrome.

59 BASIC BIOLOGICAL SCIENCES↗

Activation tagging of Arabidopsis POLYGALACTURONASE INVOLVED IN EXPANSION 2 promotes hypocotyl elongation, leaf expansion, stem lignification, mechanical stiffening, and lodging

Summary Pectin is the most abundant component of primary cell walls in eudicot plants. The modification and degradation of pectin affects multiple processes during plant development, including cell expansion, organ initiation, and cell separation. However, the extent to which pectin degradation by polygalacturonases affects stem development and secondary wall formation remains unclear. Using an activation tag screen, we identified a transgenic Arabidopsis thaliana line with longer etiolated hypocotyls, which overexpresses a gene encoding a polygalacturonase. We designated this gene as POLYGALACTURONASE INVOLVED IN EXPANSION 2 ( PGX 2 ), and the corresponding activation tagged line as PGX 2 AT . PGX 2 is widely expressed in young seedlings and in roots, stems, leaves, flowers, and siliques of adult plants. PGX 2‐ GFP localizes to the cell wall, and PGX 2 AT plants show higher total polygalacturonase activity and smaller pectin molecular masses than wild‐type controls, supporting a function for this protein in apoplastic pectin degradation. A heterologously expressed, truncated version of PGX 2 also displays polygalacturonase activity in vitro . Like previously identified PGX 1 AT plants, PGX 2 AT plants have longer hypocotyls and larger rosette leaves, but they also uniquely display early flowering, earlier stem lignification, and lodging stems with enhanced mechanical stiffness that is possibly due to decreased stem thickness. Together, these results indicate that PGX 2 both functions in cell expansion and influences secondary wall formation, providing a possible link between these two developmental processes.

Xiao, Chaowen↗

β-Glucan Synthase Gene Overexpression and β-Glucans Overproduction in Pleurotus ostreatus Using Promoter Swapping

Mushroom b-glucans are potent immunological stimulators in medicine, but their productivities are very low. In this study, we successfully improved its production by promoter engineering in Pleurotus ostreatus. The promoter for b-1,3- glucan synthase gene (GLS) was replaced by the promoter of glyceraldehyde-3-phosphate dehydrogenase gene of Aspergillus nidulans. The homologous recombination fragment for swapping GLS promoter comprised five segments, which were fused by two rounds of combined touchdown PCR and overlap extension PCR (TD-OE PCR), and was introduced into P. ostreatus through PEG/CaCl2-mediated protoplast transformation. The transformants exhibited one to three fold higher transcription of GLS gene and produced 32% to 131% higher yield of b-glucans than the wild type. The polysaccharide yields had a significant positive correlation to the GLS gene expression. The infrared spectra of the polysaccharides all displayed the typical absorption peaks of b-glucans. This is the first report of successful swapping of promoters in filamentous fungi.

54 ENVIRONMENTAL SCIENCES↗

Carbonation of Rock Minerals by Supercritical Carbon Dioxide at 250 degrees C.

Wet powder-samples of five rock minerals, granite, albite, hornblende, diorite, and biotite mica, were exposed in supercritical carbon dioxide (scCO2) for 3 days at 250 C under 17.23 MPa pressure, and then the susceptibility of the various crystalline phases present in these mineral structures to reactions with hot scCO2 was investigated by XRD and FT-IR. The anorthite present in diorite was identified as the most vulnerable phase to carbonation. In contrast, biotite displayed a great resistance, although its phase was transformed hydrothermally to sanidine and quartz. Granite comprised of two phases, anorthoclase-type albite and quartz. The carbonation of former phase led to the formation of amorphous sodium and potassium carbonates coexisting with the clay-like by-products of the carbonation reaction. The reactivity of quartz to scCO2 was minimal, if any. Among these rock minerals, only hornblende formed crystalline carbonation products, such as calcite and magnesite after exposure, reflecting the likelihood of an increase in its volume. Based upon the feldspar ternary diagram, the carbonation rate of various different minerals in the plagioclase feldspar family depended primarily on the amount of anorthite. On the other hand, alkali feldspar minerals involving anorthoclase-type albite and sanidine had a lower reactivity with scCO2, compared with that of plagioclase feldspar minerals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Chandra observations of eight sources discovered by INTEGRAL

We report on 0.3–10 keV observations with the Chandra X-ray Observatory of eight hard X-ray sources discovered within 8° of the Galactic plane by the International Gamma-ray Astrophysics Laboratory satellite. The short (∼5 ks) Chandra observations of the IGR source fields have yielded very likely identifications of X-ray counterparts for three of the IGR sources: IGR J14091–6108, IGR J18088–2741, and IGR J18381–0924. The first two have very hard spectra in the Chandra band that can be described by a power law with photon indices of Γ = 0.6 ± 0.4 and –0.7{sub −0.3}{sup +0.4}, respectively (90% confidence errors are given), and both have a unique near-IR counterpart consistent with the Chandra position. IGR J14091–6108 also displays a strong iron line and a relatively low X-ray luminosity, and we argue that the most likely source type is a cataclysmic variable (CV), although we do not completely rule out the possibility of a high mass X-ray binary. IGR J18088–2741 has an optical counterpart with a previously measured 6.84 hr periodicity, which may be the binary orbital period. We also detect five cycles of a possible 800–950 s period in the Chandra light curve, which may be the compact object spin period. We suggest that IGR J18088–2741 is also most likely a CV. For IGR J18381–0924, the spectrum is intrinsically softer with Γ=1.5{sub −0.4}{sup +0.5}, and it is moderately absorbed, N{sub H} = (4 ± 1) × 10{sup 22} cm{sup −2}. There are two near-IR sources consistent with the Chandra position, and they are both classified as galaxies, making it likely that IGR J18381–0924 is an active galactic nucleus. For the other five IGR sources, we provide lists of nearby Chandra sources, which may be used along with further observations to identify the correct counterparts, and we discuss the implications of the low inferred Chandra count rates for these five sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparative evaluation of ERTS-A imagery for resource inventory in land use planning

There are no author-identified significant results in this report. Evaluation has begun on ERTS-1 imagery of Crook County for use in landform interpretation and geologic mapping and interpretation. Outside of Crook County the geology team has been impressed by the display of fault patterns in southeastern Oregon and has begun preliminary analyses of these. Using the color combiner a complete timber type map of (1) all the forest land within Crook County, and (2) all the Ochoco National Forest has been completed. The timber types consist of five density classes which are correlated with different species compositions as the first step in the multistage forest inventory. Using the ERTS magnetic tape data the computer center has produced a 12 by 25 mile strip printout of bands 5, 6, and 7. The computer printouts are to be analyzed for different timber types and possible insect damage. Other results are: (1) limited number of clearcuts in eastern Oregon and in Cascades evident; (2) positive transparencies of band 5 appear to be too dark for maximum information of forested areas; and (3) much more information in the computer printouts of bands 6 and 7, than 5, when analyzing forest conditions.

Simonson, G. H.↗

Software techniques for image processing

The present paper describes several software techniques that can be used to get the 'most' out of an image without destroying or adding any information. A simple overview is given of a general image-processing system, a number of systems in current use are listed, and three types of processing tasks are delineated: image diagnostics, subjective enhancement, and quantitative restoration. Examples of each of these types are discussed in some detail, including histogram, differences, and Fourier analysis for image diagnostics; contrast stretching, edge enhancement, and pseudocolor displays for subjective enhancement; and photometric correction, contouring, and geometric correction for quantitative restoration.

Klinglesmith, D. A.↗

Investigation of mesoscale cloud features viewed by LANDSAT

The author has identified the following significant results. Some 50 LANDSAT images displaying mesoscale cloud features were analyzed. This analysis was based on the Rayleigh-Kuettner model describing the formation of that type of mesoscale cloud feature. This model lends itself to computation of the average wind speed in northerly flow from the dimensions of the cloud band configurations measured from a LANDSAT image. In nearly every case, necessary conditions of a curved wind profile and orientation of the cloud streets within 20 degrees of the direction of the mean wind in the convective layer were met. Verification of the results by direct observation was hampered, however, by the incompatibility of the resolution of conventional rawinsonde observations with the scale of the banded cloud patterns measured from LANDSAT data. Comparison seems to be somewhat better in northerly flows than in southerly flows, with the largest discrepancies in wind speed being within 8m/sec, or a factor of two.

Sherr, P. E.↗

Landsat-1 imagery for geologic evaluation

The paper reviews the geologic evaluation of the North Carolina coastal plain using Landsat-1 imagery as related to a general study of the geomorphology to assess the imagery as a tool for upgrading the understanding of the coastal plain, along with recognition of subsurface structures. Among the more prominent features displayed on the Landsat imagery are the scarps and beach ridges associated with former positions of the shoreline. Compilations of various types of lineaments reveal two dominant trends, one northwest-southeast and the other northeast-southwest, which are significant in the tectonic development of the Atlantic Coastal Plain. The synoptic view recorded by the satellite allows a perspective that aids geologic studies of the Atlantic Coastal Plain.

Welby, C. W.↗

Optimal guidance and control for investigating aircraft noise-impact reduction

A methodology for investigating the reduction of community noise impact is reported. This report is concerned with the development of two models to provide data: a guidance generator and an aircraft control generator suitable for various current and advanced types of aircraft. The guidance generator produces the commanded path information from inputs chosen by an operator from a graphic scope display of a land-use map of the terminal area. The guidance generator also produces smoothing at the junctions of straight-line paths.The aircraft control generator determines the optimal set of the available controls such that the aircraft will follow the commanded path. The solutions for the control functions are given and shown to be dependent on the class of aircraft to be considered, that is, whether the thrust vector is rotatable and whether the thrust vector affects the aerodynamic forces. For the class of aircraft possessing a rotatable thrust vector, the solution is redundant; this redundancy is removed by the additional condition that the noise inpact be minimized. Information from both the guidance generator and the aircraft control generator is used by the footprint program to construct the noise footprint.

Stewart, E. C.↗

High-speed laser anemometer system for intrarotor flow mapping in turbomachinery

A fringe-type laser anemometer with innovative features is described. The innovative features include: (1) rapid, efficient data acquisition processes, (2) detailed graphic display of data being accumulated, and (3) input laser-beam positioning that allows greater optical access to the intrarotor region. Results are presented that demonstrate the anemometer's capability in flow mapping within a transonic axial-flow compressor rotor.

Powell, J. A.↗

A comparative study of some mathematical models of the mean wind structure and aerodynamic drag of plant canopies

A semianalytical method for describing the mean wind profile and shear stress within plant canopies and for estimating the roughness length and the displacement height is presented. This method incorporates density and vertical structure of the canopy and includes simple parameterizations of the roughness sublayer and shelter factor. Some of the wind profiles examined are consistent with first-order closure techniques while others are consistent with second-order closure techniques. Some profiles show a shearless region near the base of the canopy; however, none displays a secondary maximum there. Comparing several different analytical expressions for the canopy wind profile against observations suggests that one particular type of profile (an Airy function which is associated with the triangular foliage surface area density distribution) is superior to the others. Because of the numerical simplicity of the methods outlined, it is suggested that they may be profitably used in large-scale models of plant-atmosphere exchanges.

Massman, William↗

Structure-property relationships in directionally solidified single crystal NiAl

The ordered intermetallic alloy NiAl is being considered as a potential high temperature structural material, but lack of ductility at ambient temperatures, especially in polycrystalline form, is presently a major obstacle in achieving this goal. Even general agreement of the intrinsic ductility that can be achieved in monocrystals is in dispute. In order to understand this problem, two directionally solidified ingots of NiAl which displayed known differences in ductility were characterized in sufficient detail to identify the corresponding microstructural differences. It was found that the type and size of casting defects, i.e., porosity, present in the material were the major factors in controlling ductility of NiAl single crystals and could explain the order of magnitude variance in fracture strains reported in the literature.

Noebe, R. D.↗