Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Research on photoelectric properties of n-GaN (0001) surface with point defects via first-principles

In order to reveal the influence of n-type doping and point defects on the electronic and optical properties of GaN (0001) surface, the pristine and defective n-GaN (0001) surface models are established. The formation energy, work function, atomic structure, electronic and optical properties of these surfaces are discussed by first-principles calculations. The results show that the defects have the strong tendency to be close to the surface position, and the N interstitial defect (N{sub i}) and the Ga vacancy (V{sub Ga}) are easily formed. The work function of the surface with V{sub Ga} drops the greatest, and the conductivity of n-type increases. In addition, the absorption coefficient of the surface with various defects is smaller than that of the pristine n-type surface. The appropriate amount of Ga vacancies can increase the probability of electron emission, but it is not conducive to the absorption of photons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mass Defect from Nuclear Physics to Mass Spectral Analysis

Mass defect is associated with the binding energy of the nucleus. It is a fundamental property of the nucleus and the principle behind nuclear energy. Mass defect has also entered into the mass spectrometry terminology with the availability of high resolution mass spectrometry and has found application in mass spectral analysis. In this application, isobaric masses are differentiated and identified by their mass defect. What is the relationship between nuclear mass defect and mass defect used in mass spectral analysis, and are they the same? .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Kinetics of amorphous defect phases measured through ultrafast nanocalorimetry

Recognition of the role of extended defects on local phase transitions has led to the conceptualization of the defect phase, localized thermodynamically stable interfacial states that have since been applied in a myriad of material systems to realize significant enhancements in material properties. Here, we explore the kinetics of grain boundary confined amorphous defect phases, utilizing the high temperature and scanning rates afforded by ultrafast differential scanning calorimetry to apply targeted annealing/quenching treatments at high rates capable of capturing the kinetic behavior. Four Al-based nanocrystalline alloys, including two binary systems, Al–Ni and Al–Y, and two ternary systems, Al–Mg–Y and Al–Ni–Y, are selected to probe the materials design space (enthalpy of mixing, enthalpy of segregation, chemical complexity) for amorphous defect phase formation and stability, with correlative transmission electron microscopy applied to link phase evolution and grain stability to nanocalorimetry signatures. A series of targeted isothermal annealing heat treatments is utilized to construct a Time–Temperature-Transformation curve for the Al–Ni system, from which a critical cooling rate of 2400 °C/s was determined for the grain boundary confined disordered-to-ordered transition. Finally, a thermal profile consisting of 1000 repeated annealing sequences was created to quantify the recovery of the amorphous defect phase following sequential annealing treatments, with results indicating remarkable microstructural stability after annealing at temperatures above 90% of the melting temperature. This work contributes to a deeper understanding of grain boundary localized thermodynamics and kinetics, with potential implications for the design and optimization of advanced materials with enhanced stability and performance.

Amorphous defect phases↗

Atomic defects, functional groups and properties in MXenes

MXenes, a new family of functional two-dimensional (2D) materials, have shown great potential for an extensive variety of applications within the last decade. Atomic defects and functional groups in MXenes are known to have a tremendous influence on the functional properties. In this review, we focus on recent progress in the characterization of atomic defects and functional group chemistry in MXenes, and how to control them to directly influence various properties ( e.g ., electron transport, Li + adsorption, hydrogen evolution reaction (HER) activity, and magnetism) of 2D MXenes materials. Dynamic structural transformations such as oxidation and growth induced by atomic defects in MXenes are also discussed. The review thus provides perspectives on property optimization through atomic defect engineering, and bottom-up synthesis methods based on defect-assisted homoepitaxial growth of MXenes.

36 MATERIALS SCIENCE↗

Constructing uniform oxygen defect engineering on primary particle level for high-stability lithium-rich cathode materials

Lithium-rich layered cathode materials are considered to be research focus of cathode candidates for next generation lithium-ion batteries due to their high specific capacity and low cost. However, lattice deoxidation associated with elemental migration and internal local shrinkage usually results in deteriorated cyclic performance and notorious voltage attenuation, severely limiting its application. In this paper, we have successfully injected uniform oxygen defects into surface region of Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 primary particles under the high-pressure and weak carbonate environment. Various experimental investigations indicate that the injected robust oxygen defects can not only mitigate detrimental interfacial reactions but also suppress unfavorable lattice variation and particle breakage. More importantly, theoretical calculations unravel the critical roles of oxygen defects in regulating energy band structure for strengthened anionic reversibility. Owing to stabilization effects of unique oxygen defect engineering, the modified Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 cathode has harvested dramatically enhanced electrochemical performance including a high initial coulombic efficiency of 96.6%, an outstanding capacity retention of 91.96% (1C, 200 cycles) and suppressed voltage decay of only 1.62 mV per cycle. Therefore, this facile and effective defect engineering strategy could establish new guidance for promoting practical application of Li-rich Mn-based cathode material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron-phonon coupling induced defect recovery and strain relaxation in Ni and equiatomic NiFe alloy

In this work, we study the effects of local heating due to electron-phonon coupling in cumulative 10 MeV Ni ion irradiation on pre-damaged pure Ni and equiatomic NiFe alloy. In particular, we estimate the defect recovery in NiFe compared to pure Ni due to the chemical disorder. Furthermore, the simulations are done using the two-temperature molecular dynamics approach that includes the electronic stopping and electron-phonon interactions. A total of 50% of the damage that consists of isolated point defects and small defect clusters is recovered in NiFe, whereas no noticeable recovery is observed in elemental Ni. We have also demonstrated strain relaxation associated with defect recombination based on the results from both simulation and X-ray diffraction measurements in NiFe. The damage recovery primarily depends on pre-existing damage level, defect configuration, ion energy (stopping powers) and electron-phonon coupling parameter of the materials of interest.

36 MATERIALS SCIENCE↗

Reviewing computational studies of defect formation and behaviors in carbon fiber structural units

Solid-state carbon materials, such as graphite and graphene, are at the forefront of materials research because of their unique electronic, vibrational, and mechanical properties, leading to a broad range of potential and realized applications. One key application is their role as basic structural units of carbon fiber (CF), a lightweight alternative to steel. In CF, a delicate relationship exists between ultimate material strength and the atomic-scale density of defects contained at the inter- and intra-subunit levels. Computational studies provide insight into the stability of various types of defects that can form in these systems and connect with experimental observables such as bandgap and spectroscopic measurements. Therefore, the literature contains many computational studies that focus on changes induced by defects, including vacancies and Dienes transformations (Stone-Wales and Thrower defects). However, wide-ranging methods and cell sizes have been used, and property-specific information is often lacking. Furthermore, this review summarizes key literature findings, paying particular attention to changes in the electronic, vibrational, and mechanical properties induced by defects in graphitic materials relevant to CF.

36 MATERIALS SCIENCE↗

Graph-component approach to defect identification in large atomistic simulations

In this work, the graph-theoretical concept of connected components is employed to extract the evolution of defect configurations in a polycrystalline aluminum structure containing ~8.3 million atoms. This graph-component approach is applied to reveal details of defect formation, transport, and transformation in the polycrystalline Al under large shear deformation. Building upon standard nearest neighbor analysis, graph theory and associated tools are used to reduce the multi-million-atom system into discrete component subgraphs that represent distinct structural defects. This method allows the automated identification, characterization, and tracking of defective regions within large volumes of data representing atomic-scale processes. Such analysis elucidates relationships between external stimuli, such as strain, and defect distributions, which have a large influence on material properties. The Graph Analytics for Large Atomistic Simulations (GALAS) codebase that implements this analysis, together with user guidance, is openly available at https://github.com/pnnl/galas.

36 MATERIALS SCIENCE↗

Point defect energetics in gallium arsenide, a comprehensive density functional theory study

In materials, point defects often control or modify functional properties. To predict the performance of materials intended for application in optoelectronic devices, it is imperative to understand the properties of those point defects. For the first time, all six intrinsic defects of GaAs, a key optoelectronics material, and their charge transition levels are calculated using density functional theory with the HSE06 functional. For comparison, both PBE and r 2 SCAN calculations are also carried out. The HSE06 results are found to be in better agreement with experimental data than previous calculations. In conclusion, the importance of using the exact electron exchange present in hybrid functionals and larger supercells to accurately determine defect levels and ground state defect configurations is demonstrated.

36 MATERIALS SCIENCE↗

Towards deep computer vision for in-line defect detection in polymer electrolyte membrane fuel cell materials

Polymer Electrolyte Membrane (PEM) fuel cells are a promising source of alternative energy. However, their production is limited by a lack of well-established methods for quality control of their constituent materials like the membrane-electrode assembly during roll-to-roll manufacturing. One potential solution is the implementation of deep learning methods to detect unwanted defects through their detection in scanned images. Here we explore the detection of defects like scratches, pinholes, and scuffs in a sample dataset of PEM optical images using two deep learning algorithms: Patch Distribution Modeling (PaDiM) for unsupervised anomaly detection and Faster-RCNN for supervised object detection. Both methods achieve scores on performance metrics (ROC-AUC and PRO-AUC for PaDiM and AP for Faster-RCNN) that are comparable to their scores on benchmark datasets. These methods also have the potential to detect a wider range of defects compared to IR thermography and previous optical inspection methods. Overall, deep learning shows promise at detecting relevant defects of interest and has the potential to achieve real-time defect detection.

30 DIRECT ENERGY CONVERSION↗

Electronic structure and magnetism of pristine, defected, and strained $\mathrm{Ti_2N}$ $\mathrm{MX}$ene

Here, from first principles electronic structure calculations, we unravel the evolution of structural, electronic, and magnetic properties of pristine, defected, and strained titanium nitride MXene with different functional groups (-F, -O, -H, and -OH). The formation and cohesive energies reveal their chemical stability. The dynamical stability of Ti 2 N mono-layer is also confirmed by phonon calculations. The MAX phase and defect free functionalized MXenes are metallic except for oxygen terminated (Ti 2 NO 2 ) one which is 100% spin polarized half-metallic ferromagnet. The spin–orbit coupling significantly influences the bare MXene (Ti 2 N) to exhibit Dirac topology and band inversion near the high symmetry directions. The strain effect sways the Fermi level thereby shifting it towards lower energy state under compression and towards higher energy state under tensile strain in Ti 2 NH 2 . The Ti 2 NO 2 exhibits exotic electronic structure not only in pristine but also in strained and defected structures. Its half-metallic nature changes to semi-metallic under 1% compression and it is completely destroyed under 2% compression. In single vacancy defect, its band structure remarkably transforms from half-metallic to semi-conducting with large band gap in 12.5% Ti, weakly semi-conducting in 5.5% Ti, and semi-metallic in 12.5% O. The 25% N defect changes its half-metallic characteristic to metallic. Further, the 12.5% Co substitution preserves its half-metallic character, whereas Mn substitution allows it to convert half-metallic characteristic into weak semi-metallic characteristic preserving ferromagnetism. However, Cr substitution converts half-metallic ferromagnetic state to half-metallic anti-ferromagnetic state. The understanding made here on collective structural stability, and electronic band structure, and magnetic phenomena in novel 2D Ti 2 N derived MXenes open up their possibility in designing them for synthesis.

36 MATERIALS SCIENCE↗

Molecular dynamics studies of lattice defect effects on tritium diffusion in zirconium

Tritium diffusion in α-Zr containing point defects such as vacancies or self-interstitial atoms (SIAs) is simulated using molecular dynamics. Point defects rapidly aggregate to form extended defects, such as 3D nanoclusters and Frank loops. The geometry of extended defects is affected by the presence of tritium. At low temperature and in the absence of tritium, vacancies aggregate to form stacking fault pyramids. Addition of tritium at these temperatures promotes aggregation of vacancies to form 3D nanoclusters, within which the tritium concentration can be sufficiently high to suggest that these defects may serve as nucleation sites for hydride precipitation. Trapping of tritium in vacancy nanocluster reduces the calculated bulk diffusivity by an amount proportional to the vacancy concentration. At high temperature, vacancy clusters change shape to form planar basal dislocation loops, which bind tritium less strongly, leading to a sharp reduction in the fraction of trapped tritium and a corresponding increase in tritium diffusivity at high temperature. In contrast, SIAs increase tritium diffusion through α-Zr. Analysis of atomic trajectories shows that tritium does not interact directly with SIAs. In conclusion, diffusion enhancement is instead related to expansion of the lattice.

36 MATERIALS SCIENCE↗

Microstructurally informed synchrotron x-ray analysis revealing helium defect transitions in ultrafine grained tungsten

The formation of insoluble gaseous defects in materials due to nuclear transmutation or ion implantation involves the diffusion of impurity atoms to form atomic defect clusters that coalesce into bubbles or cavities and ultimately degrade the material properties. Transmission electron microscopy (TEM) is limited in its ability to resolve sub-nanometer gas clusters whereas X-ray diffraction (XRD) provides information pertaining to local atomic changes. Here, in this study, helium (He) implanted ultrafine grained tungsten is explored through a multimodal defect characterization campaign combining TEM-informed Small Angle X-ray Scattering (SAXS) analysis, XRD lattice parameter measurements, and nanoscale He cluster quantification from a region of reciprocal space accessible via Wide Angle X-ray Scattering (WAXS). Moderate elevated temperature implantations are shown to produce high concentrations of sub-nanoscale He clusters and small, homogeneously distributed cavities, which collectively are linked to lattice expansion and further substantiated through complementary atomistic simulations. Increased implantation temperatures encourage the diffusion of these defects to the grain boundaries (GBs), leading to lattice relaxation and the growth of large GB cavities manifesting as bimodal size distributions in the SAXS analysis. Overall, our results demonstrate the utility of multimodal synchrotron X-ray analysis in bridging the gap between microscale He cavity quantification and atomic-scale defect analysis.

36 MATERIALS SCIENCE↗

Reactive impinging-flow technique for polymer-electrolyte-fuel-cell electrode-defect detection

Reactive impinging flow (RIF) is a novel quality-control method for defect detection (i.e., reduction in Pt catalyst loading) in gas-diffusion electrodes (GDEs) on weblines. The technique uses infrared thermography to detect temperature of a nonflammable (<4% H 2 ) reactive mixture of H 2 /O 2 in N 2 impinging and reacting on a Pt catalytic surface. In this article, different GDE size defects (with catalyst-loading reductions of 25, 50, and 100%) are detected at various webline speeds (3.048 and 9.144 m min -1 ) and gas flowrates (32.5 or 50 standard L min -1 ). Furthermore, a model is developed and validated for the technique, and it is subsequently used to optimize operating conditions and explore the applicability of the technique to a range of defects. The model suggests that increased detection can be achieved by recting more of the impinging H 2 , which can be accomplished by placing blocking substrates on the top, bottom, or both of the GDE; placing a substrate on both results in a factor of four increase in the temperature differential, which is needed for smaller defect detection. Lastly, overall, the RIF technique is shown to be a promising route for in-line, high-speed, large-area detection of GDE defects on moving weblines.

30 DIRECT ENERGY CONVERSION↗

Defect and phase stability of solid solutions of Mg{sub 2}X with an antifluorite structure: An ab initio study

First principles calculations are done for Mg{sub 2}X (X=Si, Ge or Sn) antifluorite compounds and their solid solutions in order to investigate their pseudo-binary phase diagram. The formation energies of the end-member compounds agree qualitatively with the experiments. For X=Si and Ge, there is a complete solubility, but we observe a miscibility gap in the pseudo-binary phase diagram Mg{sub 2}Si-Mg{sub 2}Sn. This agrees with the most recent experiments and phase diagram assessments. Calculated electronic properties of Mg{sub 2}Si{sub 1-x}Sn{sub x} alloys qualitatively agree with experiments and in particular the energy bandgap decreases when Si is substituted by Sn. Supercell calculations are also done in order to determine the most stable defects and the doping induced by these defects in the three end-member compounds. We find that the intrinsic n-doping in pure Mg{sub 2}Si can be attributed to the presence of magnesium atoms in interstitial positions. In Mg{sub 2}Ge and Mg{sub 2}Sn, since other defects are stable, they can be also of p-type. - Graphical abstract: Evidence of a miscibility gap from the plot of the formation energy vs x{sub Si} (silicon content) for the solid solutions Mg{sub 2}Si-Mg{sub 2}Sn. Highlights: Black-Right-Pointing-Pointer First-principles study of the stability of Mg{sub 2}Si-Mg{sub 2}X alloys (X=Ge or Sn) and their defects. Black-Right-Pointing-Pointer Mg{sub 2}Si-Mg{sub 2}Ge alloys form a complete series of solid solutions. Black-Right-Pointing-Pointer Miscibility gap is found in Mg{sub 2}Si-Mg{sub 2}Sn alloys. Black-Right-Pointing-Pointer Interstitial defects are more stable in Mg{sub 2}Si and induce n-doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic studies of Ho–Zr–O nano-composite with controllable composition and defects

With the help of sol–gel method assisted by melting salt, a series of Ho–Zr–O nano-composite with controllable composition and defects have been successfully prepared. Characterization results show that the positions, intensity, and width of the X-ray diffraction peaks of the products have a regular variation with the increase of zirconium element which implies the gradual changes of crystal spacing and product size. At the same time, the molar ratios between holmium and zirconium ions are consistent with the chemical formula and both of them are uniformly distributed in products further showing the perfect formation of targeted materials. Optical properties reveal that diversified defect forms of Ho–Zr–O nano-composite lead to the different absorptions of visible light. Photocatalytic experiments demonstrate Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals have excellent visible-light-responsive photocatalytic activities on some familiar dyes (e.g.: methylene blue and Rhodamine B) which results from the special defect structure, better absorption of visible light and larger specific surface area. It follows that Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals are a new kind of visible-light-responsive photocatalysts with better prospects in conversion and utilization of solar energy. Also, the present melting salt assisted route might be generalized to synthesize other AxByOz composite oxide nano-crystals with more complicated structures. - Highlights: • Ho–Zr–O nano-composite with controllable composition and defects has been obtained. • Diversified defect forms of products lead to the different visible light absorption. • Zr{sub 0.8}Ho{sub 0.2}O{sub 2−δ} nano-crystals have excellent photocatalytic activities.

36 MATERIALS SCIENCE↗

Geometrical defect detection for additive manufacturing with machine learning models

This study proposed a scheme based on Machine Learning (ML) models to detect geometric defects of additively manufactured objects. The ML models are trained with synthetic 3D point clouds with defects and then applied to detect defects in actual production. Using synthetic 3D point clouds rather than experimental data could save a huge amount of training time and costs associated with many prints for each design. Besides distance differences of individual points between source and target point clouds, this scheme uses a new concept called “patch” to capture macro-level information about nearby points for ML training and implementation. Numerical comparisons of prediction results on experimental data with different shapes showed that the proposed scheme outperformed the existing Z-difference method in the literature. Five ML methods (Bagging of Trees, Gradient Boosting, Random Forest, K-nearest Neighbors and Linear Supported Vector Machine) were compared under various conditions, such as different point cloud densities and defect sizes. Bagging and Random Forest were found the two best models regarding predictability; and the right patch size was found to be at 20. The proposed ML-based scheme is applicable to in-situ defect detection during additive manufacturing with the aid of a proper 3D data acquisition system.

Additive manufacturing↗

Photocatalytic activity of ZnO nanoparticles with optimization of defects

Graphical abstract: Systematic scheme for photocatalytic activity. Pristine and air quenched ZnO nanoparticles were effectively synthesized by simple combustion method and effectively used as photocatalyst for photodegradtion of methyl orange dye. It was observed that air quenched ZnO nanoparticles shows the better properties as compared to pristine ZnO. The complete degradation of dye was observed in 150 min. - Highlights: • Pristine and air quenched ZnO nanoparticles were synthesized by simple combustion method. • Synthesized ZnO for air quenched ZnO has better optoelectronic properties. • ZnO nanoparticles for air quenched ZnO exhibiting complete photodegradation of Methyl Orange dye under UV irradiation. • Photocatalytic activities for all the samples were observed in 150 min. - Abstract: Tuning of defect levels is the major concern for the application of ZnO nanoparticles. These nanoparticles with different defect concentration were prepared by simple combustion method at 700 °C and subsequent quenching in air. The catalyst was characterized by X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM), UV–vis spectroscopy measurements. XRD reveals that the cell volume increased with large temperature difference between 700 °C and quenched media. FTIR confirmed that the vibrational frequencies shifted from 519 cm{sup −1} to 535 cm{sup −1} point out the role of quenching defects. FESEM shows the size is of the order of 20–45 nm and found irregular distribution of grain boundaries in the quenched induced defects. Different morphology plays a major role in the enhancement of photocatalytic efficiency of synthesized nanoparticles. PL intensity indicates more oxygen vacancies for air quenched ZnO whereas; DTA study demonstrates that the synthesized ZnO is thermally stable. Kinetics study confirmed the photodegradation of methyl orange (MO) dye using this photocatalyst follows first order rate constant. It exhibits the complete degradation of dye only in 150 min under UV irradiation. Kinetic study revealed the rate constant of nanoparticles is 0.0165 min{sup −1}. Air quenched sample showed the higher intensity of defect band as compared to pristine ZnO.

36 MATERIALS SCIENCE↗