Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cost Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Use of remote sensing for land use policy formulation

The author has identified the following significant results. By utilizing remote sensing techniques, it was possible to accurately inventory a relatively large area for sand mining impact on protection and management of shoreland dunes within a limited time period and at a relatively low cost. Analysis of two sample areas selected from the Grand Mere area after prohibition of off-road-vehicle use indicated an increase in vegetation regrowth of 8.52% for sample area 1 and of 4.44% for sample area 2.

Boylan, M.↗

Flight service evaluation of an advanced composite empennage component on commercial transport aircraft. Phase 1: Engineering development

The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes the front and rear spars. Various design options were evaluated to arrive at a configuration which would offer the highest potential for satisfying program objectives. The preferred configuration selected consists of a hat-stiffened cover with molded integrally stiffened spars, aluminum trussed composite ribs, and composite miniwich web ribs with integrally molded caps. Material screening tests were performed to select an advanced composite material system for the Advanced Composite Vertical Fin (ACFV) that would meet the program requirements from the standpoint of quality, reproducibility, and cost. Preliminary weight and cost analysis were made, targets established, and tracking plans developed. These include FAA certification, ancillary test program, quality control, and structural integrity control plans.

Ary, A.↗

Ceramic regenerator systems development program

Ceramic regenerator cores are considered that can be used in passenger car gas turbine engines, Stirling engines, and industrial/truck gas turbine engines. Improved materials and design concepts aimed at reducing or eliminating chemical attack were placed on durability test in Ford 707 industrial gas turbine engines. The results of 19,600 hours of turbine engine durability testing are described. Two materials, aluminum silicate and magnesium aluminum silicate, continue to show promise toward achieving the durability objectives of this program. A regenerator core made from aluminum silicate showed minimal evidence of chemical attack damage after 6935 hours of engine test at 800 C and another showed little distress after 3510 hours at 982 C. Results obtained in ceramic material screening tests, aerothermodynamic performance tests, stress analysis, cost studies, and material specifications are also included.

Cook, J. A.↗

Ceramic regenerator systems development program

Ceramic regenerator cores are considered that can be used in passenger car gas turbine engines, Stirling engines, and industrial/truck gas turbine engines. Improved materials and design concepts aimed at reducing or eliminating chemical attack were placed on durability tests/in industrial gas turbine engines. A regenerator core made from aluminum silicate shows minimal evidence of chemical attack damage after 7804 hours of engine test at 800 C and another showed little distress after 4983 hours at 982 C. The results obtained in ceramic material screening tests, aerothermodynamic performance tests, stress analysis, cost studies, and material specifications are also included.

Cook, J. A.↗

Geothermal systems

Several tasks of JPL related to geothermal energy are discussed. The major task is the procurement and test and evaluation of a helical screw drive (wellhead unit). A general review of geothermal energy systems is given. The presentation focuses attention on geothermal reservoirs in California, with graphs and charts to support the discussion. Included are discussions on cost analysis, systems maintenance, and a comparison of geothermal and conventional heating and cooling systems.

Mohl, C.↗

Cogeneration power systems

Cogeneration is defined as the combination of electrical generation and process heat for more efficient use of fuel. Comparisons of energy utilization in conventional electric power plants and cogeneration electric power plants are presented. Characteristics of various cogeneration systems are also presented. Systems are analyzed for use in utility systems and industrial systems. Economic and cost analysis are reviewed.

Davis, H. S.↗

Automated array assembly

A general technology assessment and manufacturing cost analysis was presented. A near-term (1982) factory design is described, and the results of an experimental production study for the large-scale production of flat-panel silicon and solar-cell arrays are detailed.

Daiello, R. V.↗

The orbiting deep space relay station - A study report

This paper is an interim report on a study being carried out to assess the requirements for tracking and communications with deep-space probes in the post-1985 time frame and to evaluate approaches to meeting those requirements. The orbiting deep-space relay station (ODSRS) is one approach to meeting those requirements that appears to have some significant advantages over ground-based stations. A detailed conceptual design of an ODSRS is compared with other tracking and communications system configuration options. The comparison includes a life-cycle cost analysis as well as operations and performance capabilities. Reported results of the study to date include a preliminary assessment of post-1985 requirements, a discussion of planned ODSRS system capabilities as well as of tracking and communications system advantages and problems that are peculiar to an OSDRS, a look at the current status of the conceptual design of the ODSRS, and a summary of the plan for the remainder of the study.

Hunter, J. A.↗

Phase Two of the Array Automated Assembly Task for the Low Cost Solar Array Project

Various top contact metal systems were studied. Only Ti Pd Cu approaches baseline (Ti Pd Ag) quality, but this system shows a lack of long term stability. Aluminum back surface field structures were fabricated and thicknesses of p superscript + material of up to 7.0 microns were achieved with open circuit voltages of 0.59V. A general purpose ultrasonic welder was purchased and tests using various metal foils are under way. During fabrication of the demonstration module, several cells became cracked. Due to redundancy of interconnections, the module was not open circuited but the efficiency was reduced to 8.8%. The broken cell was interconnected with a strap across the back and the efficiency was increased to 11.5%. A cost analysis was made and the results indicate a selling price of $0.56/watt peak (in 1986 with 1975 dollars).

Campbell, R. B.↗

Anti-reflection Coatings on Large Area Glass Sheets

The first quarter of a one-year program designed to research and perfect a method of producing antireflective coatings on large glass sheets through the use of sodium silicate hardened by exposure to acid is reported. The requirements for a linear motion device used to produce uniform sodium silicate films were determined. A search for a commercially available device is underway. Sodium silicate solutions of varying concentrations were prepared. Determinations of the physical properties relevant to film thickness are in progress. In addition, material costs are being recorded for later use in a cost analysis of the method. All tasks of the project are proceeding according to schedule. Of the tasks, only the sodium silicate solution preparation is complete.

Pastirik, E.↗

The Development of a Method of Producing Etch Resistant Wax Patterns on Solar Cells

The first quarter of a one-year program to investigate the production of patterned etch resistant wax coatings on solar cell substrates by printing is reported. Master molds for printing plates were produced for the plates. The resist wax is being studied to determine its relevant physical properties. A printing device is currently in design, and material costs are being compiled as first step in a cost analysis task. All phases of the project are proceeding according to schedule. No specific phases are yet completed.

Pastirik, E.↗

Space Resources and Space Settlements

This publication contains the technical papers from the five task groups that took part in the 1977 Ames Summer Study on Space Settlements and Industrialization Using Nonterrestrial Materials. The study was sponsored by the following NASA Headquarters organizations: Office of Space Science, Office of Aeronautics and Space Technology, and Office of Space Transportation Systems. The NASA Ames Research Center hosted the study and provided administrative support through its Life Sciences Directorate. Expert assistance in the many aspects of the study came from NASA Headquarters, NASA centers, universities, industry, and from individual consultants. This summer study was the largest and most comprehensive investigation of space manufacturing and habitation to date; forty senior research workers and ten students participated. The six-week study was preceded by several months of planning and preparation, and was followed by extensive work on manuscript checking, review, and assembly. The study topics reflected the research areas requiring the most intensive attention as ofrnid-1977; they were: Group I: Regenerative life-support systems and controlled environment agriculture. Group II: Parametric studies of efficient habitats in space. Time and cost analysis of a space manufacturing program plan. Group III: Detection and analysis of special classes of asteroids suitable as material resources for space manufacturing; studies of retrieval missions. Group IV: Electromagnetic mass drivers for use as interorbital engines, as devices to launch lunar material into space, and as tugs for the retrieval of asteroidal material. Group V: Chemical processing of non terrestrial material in space; manufacture of metals and glass fibers, beneficiation, and design of processing plants. These five task groups each produced two or more technical papers, signed by the contributing members. The papers were subjected to independent peer review by scientists not connected with the study. During the course of the study, frequent formal and informal exchanges of information occurred between task groups, so that the entire effort evolved in a coherent fashion and was directed toward common goals. However, each group remained responsible for the choice of its topics and for its conclusions. A listing of all the participants is given on pages vii-x. It would be inappropriate for me to single out particular people or groups for special mention, since all involved applied their skills with dedication and enthusiasm. Instead, I thank everyone for their contributions to the success of the study, and also for making it a united and warmly cooperative personal experience.

John Billingham↗

Phase 2 of the Array Automated Assembly Task for the Low Cost Solar Array Project

Two process specifications supplied by contractors were tested. The aluminum silk screening process resulted in cells comparable to those from sputtered Al. The electroless plating of contacts specification could be used only with extensive modification. Several experiments suggest that there is some degradation of the front junction during the Al back surface field (BSF) fabrication. A revised process sequence was defined which incorporates Al BSF formation. A cost analysis of this process yielded a selling price of $0.75/watt peak in 1980.

Campbell, R. B.↗

The future United States space program; Proceedings of the Twenty-fifth Anniversary Conference, Houston, Tex., October 30-November 2, 1978. Parts 1 & 2

Space Shuttle guidance problems, solar power satellites, space law, satellite communications, space medicine, and engineering of large space systems are discussed. Topics of the papers include biological experiments designed for the Space Shuttle, an optimized guidance law for Space Shuttle re-entry, aircraft propulsion based on laser energy, industrial materials available in the lunar soil, health programs for a solar power satellite construction team, closed life support systems for large habitats in space, the advantages of a manned mission to Mars, the interpretation of radar imagery of Venus, a cost analysis for the satellite power system, and the geological history of Mars.

Johnston, R. S.↗

A high volume cost efficient production macrostructuring process

The paper presents an experimentally developed surface macro-structuring process suitable for high volume production of silicon solar cells. The process lends itself easily to automation for high throughput to meet low-cost solar array goals. The tetrahedron structure observed is 0.5 - 12 micron high. The surface has minimal pitting with virtually no or very few undeveloped areas across the surface. This process has been developed for (100) oriented as cut silicon. Chemi-etched, hydrophobic and lapped surfaces were successfully texturized. A cost analysis as per Samics is presented.

Chitre, S. R.↗

A candidate low-cost processing sequence for terrestrial silicon solar cell panel

Manufacturing sequence for silicon solar cells using Czochralsky crystal growing techniques in order to produce at a rate of 20 MW per year on a 24-hour per day basis is discussed. Cost analysis of the manufacturing is presented and consideration is given to the following processing decision categories of the manufacturing of an unencapsulated solar cell from a silicon wafer: (1) treatment of the optical surface; (2) formation of the junction(s); and (3) metallization of electrical collectors. The manufacturing of encapsulated solar modules from solar cells, using two glass plates, a low iron front surface, and a standard float glass back plate, is described. Totaling the three major activities of wafer making, cell manufacturing, and module fabrication, the resulting contribution to module price will be 1.945 $/watt.

Bickler, D. B.↗

Advances in the Dow Corning process for solar-grade silicon

The Dow Corning process consists of the carbothermic reduction of silica to produce silicon that is then purified by unidirectional solidification. The process has produced silicon of semiconductor quality with respect to all elements except boron and phosphorus at about 10 ppma and aluminum at 0.1 ppma. Solar cells produced from this silicon gave AM0 conversion efficiencies of 11%. A process cost analysis is presented.

Hunt, L. P.↗

Value of crops: Quantity, quality and cost price

Possibilities of using algae as a nutritional supplement are examined. The nutritional value and protein content of spirulines of blue algae are discussed. A cost analysis of growing them artificially is presented.

Meyer, C.↗