Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPRESSIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Effect of microstructures on hot compression behavior of a Ti-43Al-2Si alloy fabricated by cold crucible continuous casting

Highlights: • TiAl alloys with different lamellar colonies were fabricated by cold crucible continuous casting. • EBSD was used to investigate the evolution of lamellae during the hot compression. • Lamellar colony boundaries promote the dynamic recrystallization process. - Abstract: To investigate the influence of lamellar orientation and colony boundary on deformation behavior, fully lamellar Ti-43Al-2Si alloys were prepared by cold crucible continuous casting and isothermal compression tests were conducted at different temperatures in the range 1373–1523 K with a strain rate of 0.01 s{sup −1}. The as-cast microstructures were elongated colony with lamellae oriented at nearly 45° to the compression direction and equiaxed colony with various lamellae orientations, respectively. The results revealed that serious cracking or sliding traces appeared on the surface of deformed specimens with elongated colony original microstructure and that their peak stresses were lower compared to those of specimens with equiaxed colony original microstructure. The relationship between deformation behaviors and as-cast microstructure was analyzed in detail. It was found that the recrystallization/globularization level is significantly lower than that in specimens with equiaxed colony original microstructure during hot deformation owing to the preferred nucleation sites in colony boundaries. Finally, the lamellae conversion process was characterized to reveal the softening mechanisms of full lamellar TiAl-based alloy during hot compression.

36 MATERIALS SCIENCE↗

Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression

Highlights: • DRX kinetic model is developed for the aged AZ91D magnesium alloy. • The DRX behavior in different strained regions was investigated. • Four morphologies of the second phase were proposed during the hot compression tests. • The nucleation mechanisms of the DRX grains were clarified. - Abstract: The flow behavior of as-cast AZ91D magnesium alloy was evaluated by isothermal compression tests within the temperatures of 220 °C, 260 °C, 300 °C, 340 °C, and 380 °C, and the strain rates of 0.001, 0.01, 0.1, 1 and 10s{sup −1}. Based on the stress-strain curve and hyperbolic sine function, the thermal activation energy and the strain rate sensitivity of the material were determined to be 142.2726 kJ·mol{sup −1} and 0.142, respectively. The S type evolution of the dynamic recrystallization with the increasing strain that dynamic recrystallization (DRX) model obtained from stress and strain data. There was a good consistency between the proposed DRX kinetics model and microstructure observation results. Combining isothermal compression specimens with finite element and scanning electron microscopy (SEM) analysis indicated that the sample can be divided into rarely recrystallized region, partially recrystallized region and completely recrystallized region, which falls within the dense deformation zone, free deformation zone and severe deformation zone, respectively. The different forms of the β-Mg{sub 17}Al{sub 12} phase induced by compression tests were confirmed by SEM. Nucleation mechanisms of the DRX were discussed with reference to the transmission electron microscope (TEM) analysis results.

36 MATERIALS SCIENCE↗

3D printed hierarchical honeycombs with shape integrity under large compressive deformations

Here, we describe the in-plane compressive performance of a new type of hierarchical cellular structure created by replacing cell walls in regular honeycombs with triangular lattice configurations. The fabrication of this relatively complex material architecture with size features spanning from micrometer to centimeter is facilitated by the availability of commercial 3D printers. We apply to these hierarchical honeycombs a thermal treatment that facilitates the shape preservation and structural integrity of the structures under large compressive loading. The proposed hierarchical honeycombs exhibit a progressive failure mode, along with improved stiffness and energy absorption under uniaxial compression. High energy dissipation and shape integrity at large imposed strains (up to 60%) have also been observed in these hierarchical honeycombs under cyclic loading. Experimental and numerical studies suggest that these anomalous mechanical behaviors are attributed to the introduction of a structural hierarchy, intrinsically controlled by the cell wall slenderness of the triangular lattice and by the shape memory effect induced by the thermal and mechanical compressive treatment.

36 MATERIALS SCIENCE↗

Deformation behavior of nanoscale Al–Al 2 Cu eutectics studied by in situ micropillar compression

We report deformation behavior of nanoscale laser processed Al–Al 2 Cu eutectics at room temperature is characterized through in situ micro-pillar compression testing in a scanning transmission microscope. Interlamellar spacing of Al–Al 2 Cu eutectics varies from hundreds of nanometers to 20 nm. Three different sizes of micro-pillars are fabricated in order to study the deformation behaviors of single colony and multiple colonies, corresponding to the single crystal and polycrystal respectively. For single colonies, lamellar orientations parallel, normal or inclined to the loading direction were tested. The main findings are: 1) the plasticity mechanisms strongly depend on loading orientation: buckling and kinking in the parallel-loaded eutectics, planar sliding along Al–Al 2 Cu lamellar interfaces in the incline-loaded eutectics and localized shearing in the normal-loaded eutectics. 2) the incline-loaded eutectics exhibits the lowest compression flow strength, and the normal-loaded eutectics has the highest compression flow strength. 3) with decreasing inter-lamellar spacing, the strength increases and plasticity is uniformly distributed, as opposed to shear localization. Highest compressive plasticity is observed in polycrystalline eutectics with an ensemble of lamellar orientations with ~20 nm average spacing: 17.9% at flow stress of 1.63 GPa, and degenerate, bimodal morphology: 11.1% at flow stress of 1.36 GPa.

36 MATERIALS SCIENCE↗

Weakly Compressible Two-Pressure Two-Phase Flow

We analyze the limiting behavior of a compressible two-pressure two-phase flow model as the Mach number tends to zero. Formal asymptotic expansions are derived for the solutions of compressible two-phase equations. Expansion coefficients through second order are evaluated in closed form. Underdetermination of incompressible pressures is resolved by information supplied from the weakly compressible theory. The incompressible pressures are uniquely specified by certain details of the compressible fluids from which they are derived as a limit. This aspect of two phase flow in the incompressible limit appears to be new, and results basically from closures which satisfy single phase boundary conditions at the edges of the mixing zone.

97 MATHEMATICS AND COMPUTING↗

Compressibility effects in the shear layer over a rectangular cavity

we studied the influence of compressibility on the shear layer over a rectangular cavity of variable width in a free stream Mach number range of 0.6–2.5 using particle image velocimetry data in the streamwise centre plane. As the Mach number increases, the vertical component of the turbulence intensity diminishes modestly in the widest cavity, but the two narrower cavities show a more substantial drop in all three components as well as the turbulent shear stress. Furthermore, this contrasts with canonical free shear layers, which show significant reductions in only the vertical component and the turbulent shear stress due to compressibility. The vorticity thickness of the cavity shear layer grows rapidly as it initially develops, then transitions to a slower growth rate once its instability saturates. When normalized by their estimated incompressible values, the growth rates prior to saturation display the classic compressibility effect of suppression as the convective Mach number rises, in excellent agreement with comparable free shear layer data. The specific trend of the reduction in growth rate due to compressibility is modified by the cavity width.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A kinetic model for pure electron plasma compression via the rotating wall technique

An approximate model for pure electron plasma compression is developed for the case where the rotating wall (RW) electric field couples to the ${E}\times{B}$rotation and axial bounce motion of the electrons. The key assumption in the model is that, throughout the compression, the plasma remains in a slowly evolving thermal equilibrium defined by the plasma temperature and angular momentum. Linearized drift kinetic theory is employed to derive an expression for torque exerted by the RW field on the plasma through coupling to the resonant plasma particles, and averaging is used to find the torque that both compresses and heats the plasma. The evolution equations for the angular velocity and temperature of the plasma include the compression and heating from the torque and cooling from cyclotron radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Porosity Dependence of Compression and Lattice Rigidity in Metal–Organic Framework Series

Porous materials, including metal-organic frameworks (MOFs), are known to undergo structural changes when subjected to applied hydrostatic pressures that are both fundamentally interesting and practically relevant. With the rich structural diversity of MOFs, the development of design rules to better understand and enhance the mechanical stability of MOFs is of paramount importance. In this work, the compressibilities of seven MOFs belonging to two topological families (representing the most comprehensive study of this type to date) were evaluated using in situ synchrotron X-ray powder diffraction of samples within a diamond anvil cell. The judicious selection of these materials, representing widely studied classes of MOFs, provides broadly applicable insight into the rigidity and compression of hybrid materials. An analysis of these data reveals that the bulk modulus depends on several structural parameters (e.g., void fraction and linker length). Furthermore, we find that lattice distortions play a major role in the compression of MOFs. As a result, this study is an important step toward developing a predictive model of the structural variables that dictate the compressibility of porous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spin Transitions and Compressibility of ε-Fe 7 N 3 and γ'-Fe 4 N: Implications for Iron Alloys in Terrestrial Planet Cores

Iron nitrides are possible constituents of the cores of Earth and other terrestrial planets. Pressure-induced magnetic changes in iron nitrides and effects on compressibility remain poorly understood. In this work, we report synchrotron X-ray emission spectroscopy (XES) and X-ray diffraction (XRD) results for ε-Fe 7 N 3 and γ'-Fe 4 N up to 60 GPa at 300 K. The XES spectra reveal completion of high- to low-spin transition in ε-Fe 7 N 3 and γ'-Fe 4 N at 43 and 34 GPa, respectively. The completion of the spin transition induces stiffening in bulk modulus of ε-Fe 7 N 3 by 22% at ~40 GPa, but has no resolvable effect on the compression behavior of γ'-Fe 4 N. Fitting pressure-volume data to the Birch-Murnaghan equation of state yields V 0 = 83.29 ± 0.03 (Å 3 ), K 0 = 232 ± 9 GPa, K 0 ' = 4.1 ± 0.5 for nonmagnetic ε-Fe 7 N 3 above the spin transition completion pressure, and V 0 = 54.82 ± 0.02 (Å 3 ), K 0 = 152 ± 2 GPa, K 0 ' = 4.0 ± 0.1 for γ'-Fe 4 N over the studied pressure range. By reexamining evidence for spin transition and effects on compressibility of other candidate components of terrestrial planet cores, Fe 3 S, Fe 3 P, Fe 7 C 3 , and Fe 3 C based on previous XES and XRD measurements, we located the completion of high- to low-spin transition at ~67, 38, 50, and 30 GPa at 300 K, respectively. The completion of spin transitions of Fe 3 S, Fe 3 P, and Fe 3 C induces elastic stiffening, whereas that of Fe 7 C 3 induces elastic softening. Changes in compressibility at completion of spin transitions in iron-light element alloys may influence the properties of Earth's and planetary cores.

58 GEOSCIENCES↗

Seismic Imaging of a Shale Landscape Under Compression Shows Limited Influence of Topography–Induced Fracturing

We used seismic refraction to image the P-wave velocity structure of a shale watershed experiencing regional compression in the Valley and Ridge Province (USA). From estimates showing strong compressional stress, we expected the depth to unweathered bedrock to mirror the hill-valley-hill topography (“bowtie pattern”) by analogy to seismic velocity patterns in crystalline bedrock in the North American Piedmont that also experience compression. Previous researchers used failure potentials calculated for strong compression in the Piedmont to suggest fractures are open deeper under hills than valleys to explain the “bowtie” pattern. Seismic images of the shale watershed, however, show little evidence of such a “bowtie.” Instead, they are consistent with weak (not strong) compression. Here, this contradiction could be explained by the greater importance of infiltration-driven weathering than fracturing in determining seismic velocities in shale compared to crystalline bedrock, or to local perturbations of the regional stress field due to lithology or structures.

58 GEOSCIENCES↗

Bubbles enable volumetric negative compressibility in metastable elastocapillary systems

Although coveted in applications, few materials expand when subject to compression or contract under decompression, i.e., exhibit negative compressibility. A key step to achieve such counterintuitive behaviour is the destabilisations of (meta)stable equilibria of the constituents. Here, we propose a simple strategy to obtain negative compressibility exploiting capillary forces both to precompress the elastic material and to release such precompression by a threshold phenomenon – the reversible formation of a bubble in a hydrophobic flexible cavity. We demonstrate that the solid part of such metastable elastocapillary systems displays negative compressibility across different scales: hydrophobic microporous materials, proteins, and millimetre-sized laminae. This concept is applicable to fields such as porous materials, biomolecules, sensors and may be easily extended to create unexpected material susceptibilities.

36 MATERIALS SCIENCE↗

Femtosecond diffraction studies of solid and liquid phase changes in shock-compressed bismuth

Abstract Bismuth has long been a prototypical system for investigating phase transformations and melting at high pressure. Despite decades of experimental study, however, the lattice-level response of Bi to rapid (shock) compression and the relationship between structures occurring dynamically and those observed during slow (static) compression, are still not clearly understood. We have determined the structural response of shock-compressed Bi to 68 GPa using femtosecond X-ray diffraction, thereby revealing the phase transition sequence and equation-of-state in unprecedented detail for the first time. We show that shocked-Bi exhibits a marked departure from equilibrium behavior - the incommensurate Bi-III phase is not observed, but rather a new metastable phase, and the Bi-V phase is formed at significantly lower pressures compared to static compression studies. We also directly measure structural changes in a shocked liquid for the first time. These observations reveal new behaviour in the solid and liquid phases of a shocked material and give important insights into the validity of comparing static and dynamic datasets.

36 MATERIALS SCIENCE↗

Lossy compression of statistical data using quantum annealer

Abstract We present a new lossy compression algorithm for statistical floating-point data through a representation learning with binary variables. The algorithm finds a set of basis vectors and their binary coefficients that precisely reconstruct the original data. The optimization for the basis vectors is performed classically, while binary coefficients are retrieved through both simulated and quantum annealing for comparison. A bias correction procedure is also presented to estimate and eliminate the error and bias introduced from the inexact reconstruction of the lossy compression for statistical data analyses. The compression algorithm is demonstrated on two different datasets of lattice quantum chromodynamics simulations. The results obtained using simulated annealing show 3–3.5 times better compression performance than the algorithm based on neural-network autoencoder. Calculations using quantum annealing also show promising results, but performance is limited by the integrated control error of the quantum processing unit, which yields large uncertainties in the biases and coupling parameters. Hardware comparison is further studied between the previous generation D-Wave 2000Q and the current D-Wave Advantage system. Our study shows that the Advantage system is more likely to obtain low-energy solutions for the problems than the 2000Q.

97 MATHEMATICS AND COMPUTING↗

Deep compressed seismic learning for fast location and moment tensor inferences with natural and induced seismicity

Fast detection and characterization of seismic sources is crucial for decision-making and warning systems that monitor natural and induced seismicity. However, besides the laying out of ever denser monitoring networks of seismic instruments, the incorporation of new sensor technologies such as Distributed Acoustic Sensing (DAS) further challenges our processing capabilities to deliver short turnaround answers from seismic monitoring. In response, this work describes a methodology for the learning of the seismological parameters: location and moment tensor from compressed seismic records. In this method, data dimensionality is reduced by applying a general encoding protocol derived from the principles of compressive sensing. The data in compressed form is then fed directly to a convolutional neural network that outputs fast predictions of the seismic source parameters. Thus, the proposed methodology can not only expedite data transmission from the field to the processing center, but also remove the decompression overhead that would be required for the application of traditional processing methods. An autoencoder is also explored as an equivalent alternative to perform the same job. We observe that the CS-based compression requires only a fraction of the computing power, time, data and expertise required to design and train an autoencoder to perform the same task. Implementation of the CS-method with a continuous flow of data together with generalization of the principles to other applications such as classification are also discussed.

54 ENVIRONMENTAL SCIENCES↗

Laboratory investigation of particle acceleration and magnetic field compression in collisionless colliding fast plasma flows

In many natural phenomena in space (cosmic-rays, fast winds), non-thermal ion populations are produced, with wave-particle interactions in self-induced electromagnetic turbulence being suspected to be mediators. However, the processes by which the electromagnetic energy is bestowed upon the particles is debated, and in some cases requires field compression. Here we show that laboratory experiments using high-power lasers and external strong magnetic field can be used to infer magnetic field compression in the interpenetration of two collisionless, high-velocity (0.01–0.1c) quasi-neutral plasma flows. This is evidenced through observed plasma stagnation at the flows collision point, which Particle-in-Cell (PIC) simulations suggest to be the signature of magnetic field compression into a thin layer, followed by its dislocation into magnetic vortices. Acceleration of protons from the plasma collision is observed as well. As a possible scenario, with 1D and 2D PIC simulations we consider a compression of the vortices against dense plasma remnants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Seeding magnetic fields for laser-driven flux compression in high-energy-density plasmas

A compact, self-contained magnetic-seed-field generator (5 to 16 T) is the enabling technology for a novel laser-driven flux-compression scheme in laser-driven targets. A magnetized target is directly irradiated by a kilojoule or megajoule laser to compress the preseeded magnetic field to thousands of teslas. A fast (300 ns), 80 kA current pulse delivered by a portable pulsed-power system is discharged into a low-mass coil that surrounds the laser target. A >15 T target field has been demonstrated using a <100 J capacitor bank, a laser-triggered switch, and a low-impedance (<1 {Omega}) strip line. The device has been integrated into a series of magnetic-flux-compression experiments on the 60 beam, 30 kJ OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. The initial application is a novel magneto-inertial fusion approach [O. V. Gotchev et al., J. Fusion Energy 27, 25 (2008)] to inertial confinement fusion (ICF), where the amplified magnetic field can inhibit thermal conduction losses from the hot spot of a compressed target. This can lead to the ignition of massive shells imploded with low velocity--a way of reaching higher gains than is possible with conventional ICF.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characteristics of large amplitude compressive ion acoustic solitary wave in ion beam multicomponent plasma

Large amplitude ion acoustic compressive solitary waves are excited in a multicomponent plasma in the presence of a positive ion beam. The threshold amplitude, when steepening of the leading edge of the compressive pulse occurs, depends on the ion beam velocity. The Mach velocity and the amplitude of large amplitude compressive solitary waves are measured for different ion beam velocities. The amplification of the large amplitude compressive solitary wave is observed when the ratio of the ion beam velocity divided by the ion acoustic velocity is in the range of 0.8-1.4. The maximum amplitude of the density perturbation observed in the experiment is quite large (approx170%).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compressive and rarefactive solitary waves in nonthermal two-component plasmas

Using a Sagdeev pseudopotential formalism where nonlinear structures are stationary in a comoving frame, large ion-acoustic solitary waves and double layers have been studied in plasmas with positive ions and nonthermal electrons. The velocity range of positive, compressive solitary waves is limited by the ion density reaching infinite compression, whereas negative, rarefactive solitary waves and double layers can exist when the electron nonthermality exceeds a certain minimum. There are even regions of coexistence, the limits of which can be elucidated by considering the properties of the special Sagdeev pseudopotential at the acoustic speed. In particular, when the compositional parameters and Mach numbers admit only compressive or rarefactive solitary structures, these have to be superacoustic, their amplitude vanishing at the acoustic speed. When both compressive and rarefactive modes can occur, one of them is Korteweg-de Vries (KdV)-like, the other having a non-KdV character, with a finite amplitude at the acoustic speed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗