SEARCH · Engineering Papers

Results for “Boundary value problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

All sources NASA NTRS DOE OSTI

NASA NTRS1988

A comparative study of theoretical methods on Goertler instability

Goertler vortices arise in boundary layers along concave surfaces due to centrifugal effects and these vortices in combination with Tollmien-Schlichting (TS) waves and crossflow vortices may play an important role in triggering early transition. There have been two distinct theoretical approaches to solve the problem. In the classical, normal-mode approach (NMA) the linear development of Goertler vortices is reduced to an eigenvalue problem. In the other method, initiated by Hall, the governing partial differential equations for the perturbations which are parabolic in the streamwise direction, are solved as an initial value problem. This method predicts multiple neutral curves depending on how and where the mean flow is perturbed, unlike the NMA where a unique but different neutral curve is predicted by each investigator. The present paper attempts to compare the two techniques and shows that mutually compatible results can be obtained when physically consistent assumptions are made.

Kalburgi, Vijay↗

NASA NTRS1992

Coupling finite and boundary element methods for two-dimensional potential problems

A finite element-boundary element (FE-BE) coupling method based on a weighted residual variational method is presented for potential problems, governed by either the Laplace or the Poisson equations. In this method, a portion of the domain of interest is modeled by finite elements (FE) and the remainder of the region by boundary elements (BE). Because the BE fundamental solutions are valid for infinite domains, a procedure that limits the effects of the BE fundamental solution to a small region adjacent to the FE region, called the transition region (TR), is developed. This procedure involves a judicious choice of functions called the transition (T) functions that have unit values on the BE-TR interface and zero values on the FE-TR interface. The present FE-BE coupling algorithm is shown to be independent of the extent of the transition region and the choice of the transition functions. Therefore, transition regions that extend to only one layer of elements between FE and BE regions and the use of simple linear transition functions work well.

Krishnamurthy, T.↗

NASA NTRS1991

Solution of steady-state, two-dimensional conservation laws by mathematical programming

A truly two-dimensional algorithm is created for solving the steady-state two-dimensional conservation-law problem. An overdetermined system of algebraic equations is obtained through discretization by finite-volume formulas. These equations are perturbed nonsingularly and are solved by an efficient geometrically oriented l(1) procedure. The basic algorithm and the theory for the linear case f(u) = u are presented, and computational results for the nonlinear case f(u) = sq u are also analyzed. It is noted that the l(1) procedure captures boundary shocks as well as oblige and zigzag interior shocks in bands that are one cell wide, and the solution values are accurate up to the edge of the shock.

Lavery, John E.↗

NASA NTRS2018

Simulation of Sound Absorption by Scattering Bodies Treated with Acoustic Liners Using a Time-Domain Boundary Element Method

Reducing aircraft noise is a major objective in the field of computational aeroacoustics. When designing next generation quiet aircraft, it is important to be able to accurately and efficiently predict the acoustic scattering by an aircraft body from a given noise source. Acoustic liners are an effective tool for aircraft noise reduction, and are characterized by a complex valued frequency-dependent impedance, Z(w). Converted into the time-domain using Fourier transforms, an impedance boundary condition can be used to simulate the acoustic wave scattering of geometric bodies treated with acoustic liners. This work uses an admittance boundary condition where the admittance, Y(w), is defined to be the inverse of impedance, i.e., Y(w) = 1/Z(w). An admittance boundary condition will be derived and coupled with a time domain boundary integral equation. The solution will be obtained iteratively using spatial and temporal basis functions and will allow for acoustic scattering problems to be modeled with geometries consisting of both unlined and soft surfaces. Stability will be demonstrated through eigenvalue analysis.

Pizzo, Michelle E.↗

NASA NTRS1989

Interaction between Tollmien-Schlichting waves and free-stream disturbances in boundary-layer flows

A numerical study of the generation of Tollmien-Schlichting (T-S) waves due to the interaction between a small freestream disturbance and a small localized variation of the surface geometry has been carried out using finite difference methods. The nonlinear steady flow is of the viscous-inviscid interactive type while the unsteady disturbed flow is assumed to be governed by the Navier-Stokes equations linearized about this flow. Numerical solutions illustrate the growth or decay of the T-S waves generated by the interaction between the freestream disturbance and the surface distortion, depending on the value of the scaled Strouhal number. An important result of this receptivity problem is the numerical determination of the amplitude of the Tollmien-Schlichting waves.

Bodonyi, R. J.↗

NASA NTRS1986

Application of a low order panel method to complex three-dimensional internal flow problems

An evaluation of the ability of a low order panel method to predict complex three-dimensional internal flow fields was made. The computer code VSAERO was used as a basis for the evaluation. Guidelines for modeling internal flow geometries were determined and the effects of varying the boundary conditions and the use of numerical approximations on the solutions accuracy were studied. Several test cases were run and the results were compared with theoretical or experimental results. Modeling an internal flow geometry as a closed box with normal velocities specified on an inlet and exit face provided accurate results and gave the user control over the boundary conditions. The values of the boundary conditions greatly influenced the amount of leakage an internal flow geometry suffered and could be adjusted to eliminate leakage. The use of the far-field approximation to reduce computation time influenced the accuracy of a solution and was coupled with the values of the boundary conditions needed to eliminate leakage. The error induced in the influence coefficients by using the far-field approximation was found to be dependent on the type of influence coefficient, the far-field radius, and the aspect ratio of the panels.

Ashby, D. L.↗

NASA NTRS1982

Theoretical analyses of Baroclinic flows

A stability analysis of a thin horizontal rotating fluid layer which is subjected to arbitrary horizontal and vertical temperature gradients is presented. The basic state is a nonlinear Hadley cell which contains both Ekman and thermal boundary layers; it is given in closed form. The stability analysis is based on the linearized Navier-Stokes equations, and zonally symmetric perturbations in the form of waves propagating in the meridional direction are considered. Numerical methods were used for the stability problem. It was found that the instability sets in when the Richardson number is close to unity and that the critical Richardson number is a non-monotonic function of the Prandtl number. Further, it was found that the critical Richardson number decreases with increasing Ekman number until a critical value of the Ekman number is reached beyond which the fluid is stable.

Antar, B.↗

NASA NTRS1993

Effect of curvature on stationary crossflow instability of a three-dimensional boundary layer

An incompressible three-dimensional laminar boundary-layer flow over a swept wing is used as a model to study both the wall-curvature and streamline-curvature effects on the stationary crossflow instability. The basic state is obtained by solving the full Navier-Stokes (N-S) equations numerically. The linear disturbance equations are cast on a fixed, body-intrinsic, curvilinear coordinate system. Those nonparallel terms which contribute mainly to the streamline-curvature effect are retained in the formulation of the disturbance equations and approximated by their local finite difference values. The resulting eigenvalue problem is solved by a Chebyshev collocation method. The present results indicate that the convex wall curvature has a stabilizing effect, whereas the streamline curvature has a destabilizing effect. A validation of these effects with an N-S solution for the linear disturbance flow is provided.

Lin, Ray-Sing↗

NASA NTRS1981

An extended classical solution of the droplet growth problem

Problems of applying the classical kinetic theory to the growth of small droplets from vapor are examined. A solution for the droplet growth equation is derived which is based on the assumption of a diffusive field extending to the drop surface. The method accounts for partial thermal and mass accommodation at the interface and the kinetic limit to the mass and heat fluxes, and it avoids introducing the artifact of a discontinuity in the thermal and vapor field near the droplet. Consideration of the environmental fields in spherical geometry utilizing directional fluxes yields boundary values in terms of known parameters and a new Laplace transform integral.

Anderson, B. J.↗

NASA NTRS1997

Comparative Modeling Studies of Boreal Water and Carbon Balance

The coordination of the modeling and field efforts for an Intensive Field Campaign (IFC) may resemble the chicken and egg dilemma. This session's theme advocates that early and proactive involvement by modeling teams can produce a scientific and operational benefit for the IFC and Experiment. This talk will provide some examples and suggestions originating from the NASA funded IFC's of the FIFE First ISLSCP (International Satellite Land Surface Climatology Project) Field Experiment, Oregon Transect Ecosystem Research (OTTER) and predominately Boreal Ecosystem-Atmosphere Study (BOREAS) Experiments. In February 1994 and prior to the final selection of the BOREAS study sites, a group of funded BOREAS investigators agreed to run their models with data for five community types representing the proposed tower flux sites. All participating models were given identical initial values and boundary conditions and driven with identical climate data. The objectives of the intercomparison exercise were: 1) compare simulation results of participating terrestrial, hydrological, and atmospheric models over selected time frames; 2) learn about model behavior and sensitivity to estimated boreal site and vegetation definitions; 3) prioritize BOREAS field data collection efforts supporting modeling studies; 4) identify individual model deficiencies as early as possible. Out of these objectives evolved some important coordination and science issues for the BOREAS Experiment that can be generalized to IFCs and long term archiving of the data. Some problems are acceptable because they are endemic to maintaining fair and open competition prior to the peer review process. Others are logistical and addressable through application of planning, management, and information sciences. This investigator has identified one source of measurement and model incompatibility that is manifest in the IFC scaling approach. Although intuitively obvious, scaling problems are already more formally defined in the Geography literature. An example of the scaling problem will be demonstrated with Vegetation/Ecosystem Mapping and Analysis Project (VEMAP) and OTTER data.

Coughlan, J.↗

NASA NTRS1994

H2O-H2SO4 system in Venus' clouds and OCS, CO, and H2SO4 profiles in Venus' troposphere

A coupled problem of diffusion and condensation is solved for the H2SO4-H2O system in Venus' cloud layer. The position of the lower cloud boundary, profiles of the H2O and H2SO vapor mixing ratios, and of the H2O/H2SO4 ratio of sulfuric acid aerosol and its flux are calculated as functions of the column photochemical production rate of sulfuric acid. Variations of the lower cloud boundary are considered. Our basic model, which is constrained to yield f(sub H2O)(30km) = 30 ppm, predicts the position of the lower cloud boundary at 48.4 km coinciding with the mean Pioneer Venus value, the peak H2SO4 mixing ratio of 5.4 ppm, and the H2SO4 production rate phi(sub H2SO4) = 2.2 x 10(exp 12) cm(exp -2)s(exp -1).

Krasnopolsky, V. A.↗

NASA NTRS1996

A dynamic response model for pressure sensors in continuum and high Knudsen number flows with large temperature gradients

This paper develops a dynamic model for pressure sensors in continuum and rarefied flows with longitudinal temperature gradients. The model was developed from the unsteady Navier-Stokes momentum, energy, and continuity equations and was linearized using small perturbations. The energy equation was decoupled from momentum and continuity assuming a polytropic flow process. Rarefied flow conditions were accounted for using a slip flow boundary condition at the tubing wall. The equations were radially averaged and solved assuming gas properties remain constant along a small tubing element. This fundamental solution was used as a building block for arbitrary geometries where fluid properties may also vary longitudinally in the tube. The problem was solved recursively starting at the transducer and working upstream in the tube. Dynamic frequency response tests were performed for continuum flow conditions in the presence of temperature gradients. These tests validated the recursive formulation of the model. Model steady-state behavior was analyzed using the final value theorem. Tests were performed for rarefied flow conditions and compared to the model steady-state response to evaluate the regime of applicability. Model comparisons were excellent for Knudsen numbers up to 0.6. Beyond this point, molecular affects caused model analyses to become inaccurate.

Whitmore, Stephen A.↗

NASA NTRS1991

Linear impact of thermal inhomogeneities on mesoscale atmospheric flow with zero synoptic wind

An analytical evaluation of the perturbations to mesoscale atmospheric flows induced by thermal inhomogeneities in the convective boundary layer is presented. The time evolution of these perturbations as a function of the intensity and of the horizontal and vertical scales of the diabatic forcing is studied. The problem is approached using Laplace transform theory for the time behavior and Green function theory for the spatial structure. Results show that the growth of the atmospheric perturbations closely follows the growth of the convective boundary layer; the transient being characterized by a number of inertia-gravity oscillations of decreasing intensity. The vertical scale is determined by the depth of the convective boundary layer; and the horizontal scale is determined by the local Rossby deformation radius. Sinusoidally periodic thermal forcing induce periodic atmospheric cells of the same horizontal scale. The intensity of mesoscale cells increases for increasing values of the wave number, reaches its maximum value when the wavelength of the forcing is of the order of the local Rossby radius, and then decreases as the wavelength of the forcing decreases.

Dalu, G. A.↗

NASA NTRS2015

Estimation of Surface Temperature and Heat Flux by Inverse Heat Transfer Methods Using Internal Temperatures Measured While Radiantly Heating a Carbon/Carbon Specimen up to 1920 F

The ability to solve the heat conduction equation is needed when designing materials to be used on vehicles exposed to extremely high temperatures; e.g. vehicles used for atmospheric entry or hypersonic flight. When using test and flight data, computational methods such as finite difference schemes may be used to solve for both the direct heat conduction problem, i.e., solving between internal temperature measurements, and the inverse heat conduction problem, i.e., using the direct solution to march forward in space to the surface of the material to estimate both surface temperature and heat flux. The completed research first discusses the methods used in developing a computational code to solve both the direct and inverse heat transfer problems using one dimensional, centered, implicit finite volume schemes and one dimensional, centered, explicit space marching techniques. The developed code assumed the boundary conditions to be specified time varying temperatures and also considered temperature dependent thermal properties. The completed research then discusses the results of analyzing temperature data measured while radiantly heating a carbon/carbon specimen up to 1920 F. The temperature was measured using thermocouple (TC) plugs (small carbon/carbon material specimens) with four embedded TC plugs inserted into the larger carbon/carbon specimen. The purpose of analyzing the test data was to estimate the surface heat flux and temperature values from the internal temperature measurements using direct and inverse heat transfer methods, thus aiding in the thermal and structural design and analysis of high temperature vehicles.

Pizzo, Michelle↗

NASA NTRS1993

On the assumption of vanishing temperature fluctuations at the wall for heat transfer modeling

Boundary conditions for fluctuating wall temperature are required for near-wall heat transfer modeling. However, their correct specifications for arbitrary thermal boundary conditions are not clear. The conventional approach is to assume zero fluctuating wall temperature or zero gradient for the temperature variance at the wall. These are idealized specifications and the latter condition could lead to an ill posed problem for fully-developed pipe and channel flows. In this paper, the validity and extent of the zero fluctuating wall temperature condition for heat transfer calculations is examined. The approach taken is to assume a Taylor expansion in the wall normal coordinate for the fluctuating temperature that is general enough to account for both zero and non-zero value at the wall. Turbulent conductivity is calculated from the temperature variance and its dissipation rate. Heat transfer calculations assuming both zero and non-zero fluctuating wall temperature reveal that the zero fluctuating wall temperature assumption is in general valid. The effects of non-zero fluctuating wall temperature are limited only to a very small region near the wall.

Sommer, T. P.↗

NASA NTRS2010

Probabilistic Structural Analysis Program

NASA/NESSUS 6.2c is a general-purpose, probabilistic analysis program that computes probability of failure and probabilistic sensitivity measures of engineered systems. Because NASA/NESSUS uses highly computationally efficient and accurate analysis techniques, probabilistic solutions can be obtained even for extremely large and complex models. Once the probabilistic response is quantified, the results can be used to support risk-informed decisions regarding reliability for safety-critical and one-of-a-kind systems, as well as for maintaining a level of quality while reducing manufacturing costs for larger-quantity products. NASA/NESSUS has been successfully applied to a diverse range of problems in aerospace, gas turbine engines, biomechanics, pipelines, defense, weaponry, and infrastructure. This program combines state-of-the-art probabilistic algorithms with general-purpose structural analysis and lifting methods to compute the probabilistic response and reliability of engineered structures. Uncertainties in load, material properties, geometry, boundary conditions, and initial conditions can be simulated. The structural analysis methods include non-linear finite-element methods, heat-transfer analysis, polymer/ceramic matrix composite analysis, monolithic (conventional metallic) materials life-prediction methodologies, boundary element methods, and user-written subroutines. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. NASA/NESSUS 6.2c is structured in a modular format with 15 elements.

Pai, Shantaram S.↗

NASA NTRS1976

Effect of velocity gradients on measurements of turbulent shear stress

Experiments were carried out to evaluate the effects of normal velocity gradients on hot wire measurements in a subsonic boundary layer of the same size as the flow investigated by Johnson and Rose (1975). Both hot wire and film anemometers were used to measure the turbulent properties of the boundary layer. A special X-wire probe with one wire vertical and the other at an angle of about 40 deg to the flow was used to demonstrate the gradient effects. The results indicate that major errors are encountered when mean and turbulent velocity gradients exist along the length of hot wire sensors, the problem being more pronounced at high speeds. Although the split film sensor results show a significant improvement over the X-wire sensor, further reduction in the space resolution of sensors by roughly an order of magnitude would appear to be necessary to reduce the error to acceptable values near the wall.

Sandborn, V. A.↗

NASA NTRS1994

H2O-H2SO4 system in Venus' clouds and OCS, CO, and H2SO4 profiles in Venus' troposphere

A coupled problem of diffusion and condensation is solved for the H2SO4-H2O system in Venus' cloud layer. The position of the lower cloud boundary and profiles of the H2O and H2SO4 vapor mixing ratios and of the H2O/H2SO4 ratio of sulfuric acid aerosol and its flux are calculated as functions of the column photochemical production rate of sulfuric acid, Phi(sub H2SO4). Variations of the lower cloud boundary are considered. Our basic model, which is constrained to yield f(sub H2O) (30 km) = 30 ppm (Pollack et al. 1993), predicts the position of the lower cloud boundary at 48.4 km coinciding with the mean Pioneer Venus value, the peak H2SO4 mixing ratio of 5.4 ppm, and the H2SO4 production rate Phi(sub H2SO4) = 2.2 x 10(exp 12)/sq cm/s. The sulfur to sulfuric acid mass flux ratio in the clouds is 1:27 in this model, and the mass loading ratio may be larger than this value if sulfur particles are smaller than those of sulfuric acid. The model suggests that the extinction coefficient of sulfuric acid particles with radius 3.7 micrometers (mode 3) is equal to 0.3/km in the middle cloud layer. The downward flux of CO is equal to 1.7 x 10(exp 12)/sq cm/s in this model. Our second model, which is constrained to yield f(sub H2O) = 10 ppm at the lower cloud boundary, close to the value measured by the Magellan radiooccultations, predicts the position of this boundary to be at 46.5 km, which agrees with the Magellan data; f(sub H2O) (30 km) = 90 ppm, close to the data of Moroz et al. (1983) at this altitude; Phi(sub H2SO4) = 6.4 x 10(exp 12)/sq cm/s; and Phi(sub co) = 4.2 x 10(exp 12)/sq cm/s. The S/H2SO4 flux mass ratio is 1:18, and the extinction coefficient of the mode 3 sulfuric acid particles is equal to 0.9 km in the middle cloud layer. A strong gradient of the H2SO4 vapor mixing ratio near the bottom of the cloud layer drives a large upward flux of H2SO4, which condenses and forms the excessive downward flux of liquid sulfuric acid, which is larger by a factor of 4-7 than the flux in the middle cloud layer. This is the mechanism of formation of the lower cloud layer. Variations of the lower cloud layer are discussed. Our modeling of the OCS and CO profiles in the lower atmosphere measured by Pollack et al. (1993) provides a reasonable explanation of these data and shows that the rate coefficient of the reaction SO3 + CO yields CO2 + SO2 is equal to 10(exp -11) exp(-(13,100 +/- 1000)/T) cc/s. The main channel of the reaction between SO3 and OCS is CO2 + (SO)2, and its rate coefficient is equal to 10(exp -11) exp(-(8900 +/- 500)/T) cc/s. In the conditions of Venus' lower atmosphere, (SO)2 is removed by the reaction (SO)2 + OCS yields CO + S2 + SO2. The model predicts an OCS mixing ratio of 28 ppm near the surface.

Krasnopolsky, V. A.↗