Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

The Effect of Boron Content on Wetting Kinetics in Si-B Alloy/h-BN System

In this work, the effect of boron content on the high-temperature wetting behavior in the Si-B alloy/h-BN systems was experimentally examined. For this reason, hypoeutectic, eutectic and hypereutectic Si-B alloys (Si-1B, Si-3.2B and Si-5.7B wt.%, respectively) were produced by electric arc melting method and then subjected to sessile drop/contact heating experiments with polycrystalline h-BN substrates, at temperatures up to 1750 °C. Similar to pure Si/h-BN system, wetting kinetics curves calculated on a basis of in situ recorded drop/substrate images point toward non-wetting behavior of all selected Si-B alloy/h-BN couples. The highest contact angle values of ~ 150° were obtained for hypoeutectic and eutectic Si-B alloys in the whole examined temperature range.

36 MATERIALS SCIENCE↗

Reactive belite stabilization mechanisms by boron-bearing dopants

Belite-rich cements hold promise for reduced energy consumption and CO{sub 2} emissions, but their use is hindered by the slow hydration rates of ordinary belites. This drawback may be overcome by activation of belite by doping. Here, the doping mechanism of B and Na/B in belites is reported. For B-doping, three solid solutions have been tested: Ca{sub 2-x/2{open_square}x/2}(SiO{sub 4}){sub 1-x}(BO{sub 3}){sub x}, Ca{sub 2}(SiO{sub 4}){sub 1-x}(BO{sub 3}){sub x}O{sub x/2} and Ca{sub 2-x}B{sub x}(SiO{sub 4}){sub 1-x}(BO{sub 4}){sub x}. The experimental results support the substitution of silicate groups by tetrahedral borate groups with the concomitant substitution of calcium by boron for charge compensation, Ca{sub 2-x}B{sub x}(SiO{sub 4}){sub 1-x}(BO{sub 4}){sub x}. Otherwise, the coupled Na/B-doping of belite has also been investigated and Ca{sub 2-x}Na{sub x}(SiO{sub 4}){sub 1-x}(BO{sub 3}){sub x} series is confirmed to exist for a large range of x values. Along this series, {alpha}'{sub H}-C{sub 2}S is the main phase (for x {>=} 0.10) and is single phase for x = 0.25. Finally, a new structural description for borax doping in belite has been developed for {alpha}'{sub H}-Ca{sub 1.85}Na{sub 0.15}(SiO{sub 4}){sub 0.85}(BO{sub 3}){sub 0.15}, which fits better borax activated belite cements in Rietveld mineralogical analysis.

36 MATERIALS SCIENCE↗

A new stepwise-pressing reaction method for synthesizing pure turbostractic boron nitride

A new stepwise-pressing reaction method is proposed, by which pure and near monodisperse turbostractic boron nitride (tBN) nano-particles with high yield (higher than 92%) are selectively synthesized via reacting BBr{sub 3} and (CH{sub 3}){sub 3}N at 260 {sup o}C in benzene. The obtained sample emits a strong photoluminescence band at 346 nm (under a excitation of 215 nm), making tBN a promising candidate for fabricating UV photoelectronic devices.

36 MATERIALS SCIENCE↗

Boron Neutron Capture Therapty (BNCT) in an Oral Precancer Model: Therapeutic Benefits and Potential Toxicity of a Double Application of BNCT with a Six-Week Interval

Given the clinical relevance of locoregional recurrences in head and neck cancer, we developed a novel experimental model of premalignant tissue in the hamster cheek pouch for long-term studies and demonstrated the partial inhibitory effect of a single application of Boron Neutron Capture Therapy (BNCT) on tumor development from premalignant tissue. The aim of the present study was to evaluate the effect of a double application of BNCT with a 6 week interval in terms of inhibitory effect on tumor development, toxicity and DNA synthesis. We performed a double application, 6 weeks apart, of (1) BNCT mediated by boronophenylalanine (BPA-BNCT); (2) BNCT mediated by the combined application of decahydrodecaborate (GB-10) and BPA [(GB-10 + BPA)-BNCT] or (3) beam-only, at RA-3 nuclear reactor and followed the animals for 8 months. The control group was cancerized and sham-irradiated. BPA-BNCT, (GB- 10 + BPA)-BNCT and beam-only induced a reduction in tumor development from premalignant tissue that persisted until 8, 3, and 2 months respectively. An early maximum inhibition of 100% was observed for all 3 protocols. No normal tissue radiotoxicity was detected. Reversible mucositis was observed in premalignant tissue, peaking at 1 week and resolving by the third week after each irradiation. Mucositis after the second application was not exacerbated by the first application. DNA synthesis was significantly reduced in premalignant tissue 8 months post-BNCT. A double application of BPA-BNCT and (GB-10 + BPA)-BNCT, 6 weeks apart, could be used therapeutically at no additional cost in terms of radiotoxicity in normal and dose-limiting tissues.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Theoretical investigation of the divacancies in boron nitride nanotubes: Properties and surface reactivity toward various adsorbates

The recent study has shown that the point defects formed under electron irradiation in the boron nitride nanotubes (BNNTs) are primarily BN divacancies. In the present work, we explore the properties of BNNTs with divacancies and estimate their surface reactivity toward various adsorbates through density functional theory calculations. Divacancies in BNNTs can self-heal by spontaneously reconstructing stable structures that have two pentagons side by side with an octagon (585). The formation energies, which strongly depend on the divacancy orientation with respect to the tube axis, increase with increasing tube diameters. Compared to the reactivity of the perfect BNNT, those sites near the divacancies have a higher reactivity due to the formation of frustrated B-B and N-N bonds and the local strain induced by pentagonal and octagonal rings. The present results might be useful for deeply understanding the nature of defects in BNNTs and rendering BNNTs promising for many applications, especially in nanoelectronics.

36 MATERIALS SCIENCE↗

Effect of cubic phase evolution on field emission properties of boron nitride island films

Field emission performance of boron nitride (BN) island films is studied in terms of cubic phase evolution in plasma-enhanced chemical vapor deposition. Fine-grained island films with large surface roughness can be grown for initial sp{sup 2}-bonded BN and subsequent cubic BN (cBN) phases by using low-energy (approx20 eV) ion bombardment. Ultraviolet photoelectron spectroscopy reveals that the electron affinity is as low as 0.3 eV for both sp{sup 2}-bonded BN and cBN phases. The evolution of cBN islands reduces the turn-on field down to around 9 V/mum and increases the current density up to 10{sup -4} A/cm{sup 2}. The emission is facilitated by the larger field enhancement due to the larger roughness and the higher conduction of cBN islands. The potential barrier height is estimated to be about 3.4 eV for emission from the Fermi level, while it is only about 0.3 eV for 'conduction band emission'.

36 MATERIALS SCIENCE↗

Thermal conductivity and Seebeck coefficients of icosahedral boron arsenide films on silicon carbide

The thermal conductivity of icosahedral boron arsenide (B{sub 12}As{sub 2}) films grown on (0001) 6H-SiC substrates by chemical vapor deposition was studied by the 3{omega} technique. The room temperature thermal conductivity decreased from 27.0 to 15.3 W/m K as the growth temperature was decreased from 1450 to 1275 deg. C. This is mainly attributed to the differences in the impurity concentration and microstructure, determined from secondary ion mass spectrometry and high resolution transmission electron microscopy, respectively. Callaway's theory was applied to calculate the temperature-dependent thermal conductivity, and the results are in good agreement with the experimental data. Seebeck coefficients were determined as 107 {mu}V/K and 136 {mu}V/K for samples grown at 1350 deg. C with AsH{sub 3}/B{sub 2}H{sub 6} flow ratio equals to 1:1 and 3:5, respectively.

36 MATERIALS SCIENCE↗

Preparation of superhydrophobic nanodiamond and cubic boron nitride films

Superhydrophobic surfaces were achieved on the hardest and the second hardest materials, diamond and cubic boron nitride (cBN) films. Various surface nanostructures of nanocrystalline diamond (ND) and cBN films were constructed by carrying out bias-assisted reactive ion etching in hydrogen/argon plasmas; and it is shown that surface nanostructuring may enhance dramatically the hydrophobicity of ND and cBN films. Together with surface fluorination, superhydrophobic ND and cBN surfaces with a contact angle greater than 150 deg. and a sliding angle smaller than 10 deg. were demonstrated. The origin of hydrophobicity enhancement is discussed based on the Cassie model.

36 MATERIALS SCIENCE↗

Photovoltaic devices based on high density boron-doped single-walled carbon nanotube/n-Si heterojunctions

A simple and easily processible photovoltaic device has been developed based on borondoped single-walled carbon nanotubes (B-SWNTs) and n-type silicon (n-Si) heterojunctions. The single-walled carbon nanotubes (SWNTs) were substitutionally doped with boron atoms by thermal annealing, in the presence of B 2 O 3 . The samples used for these studies were characterized by Raman spectroscopy, thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS). The fully functional solar cell devices were fabricated by airbrush deposition that generated uniform B-SWNT films on top of the n-Si substrates. The carbon nanotube films acted as exciton-generation sites, charge collection and transportation, while the heterojunctions formed between B-SWNTs and n-Si acted as charge dissociation centers. The current-voltage characteristics in the absence of light and under illumination, as well as optical transmittance spectrum are reported here. It should be noted that the device fabrication process can be made amenable to scalability by depositing direct and uniform films using airbrushing, inkjet printing, or spin-coating techniques.

14 SOLAR ENERGY↗

Electrical transport properties of the Si-doped cubic boron nitride thin films prepared by in situ cosputtering

Si-doped cubic boron nitride (c-BN) films with various Si concentrations were achieved by in situ cosputtering during ion beam assisted deposition. Effects of the Si concentration and rapid thermal annealing (RTA) conditions on the electrical transport properties of Si-doped c-BN thin films were investigated systematically. The results suggest that the optimum RTA condition is at the temperature of 1000 deg. C for 3 min. The resistance of Si-doped c-BN films gradually decreases as the Si concentration increases, indicating an electrical doping effect of the Si impurity. The temperature dependent electrical conductivity of the Si-doped c-BN films suggests that different conduction mechanisms are dominant over the different temperature ranges. Based on the Davis-Mott model, we propose that the extended-state conduction, band tail-state conduction and short-range hopping conduction are responsible for the respective temperature ranges. In addition, the reduction in activation energy of Si impurities is observed as the Si concentration increases.

36 MATERIALS SCIENCE↗

Investigation of the Phase Formation of AlSi-Coatings for Hot Stamping of Boron Alloyed Steel

Hot stamping of boron alloyed steel is gaining more and more importance for the production of high strength automotive body parts. Within hot stamping of quenchenable steels the blank is heated up to austenitization temperature, transferred to the tool, formed rapidly and quenched in the cooled tool. To avoid scale formation during the heating process of the blank, the sheet metal can be coated with an aluminium-silicum alloy. The meltimg temperature of this coating is below the austenitization temperature of the base material. This means, that a diffusion process between base material and coating has to take place during heating, leading to a higher melting temperature of the coating.In conventional heating devices, like roller hearth furnaces, the diffusion process is reached by relatively low heating rates. New technologies, like induction heating, reach very high heating rates and offer great potentials for the application in hot stamping. Till now it is not proofed, that this technology can be used with aluminum-silicon coated materials. This paper will present the results of comparative heating tests with a conventional furnace and an induction heating device. For different time/temperature-conditions the phase formation within the coating will be described.

36 MATERIALS SCIENCE↗

NDT characterization of boron carbide for ballistic applications

Boron Carbide (B{sub 4}C) is widely used to provide ballistic protection in challenging service environments. This work was carried out to develop non-destructive testing (NDT) for B{sub 4}C characterization. Deliberate flaws were introduced within the B{sub 4}C tiles during manufacturing. An experimental program was undertaken to determine the best method to detect defects in ceramic tiles and material characterization. Ultrasonic characterization of the material was found to be able to detect both density variation and defects within the material.

36 MATERIALS SCIENCE↗

Influence of Boron doping on the structural, optical and electrical properties of CdO thin films by spray pyrolysis technique

Cadmium oxide and Boron (B) doped Cadmium oxide thin films were deposited using spray pyrolysis technique. The structural, morphological, electrical and optical properties of undoped and B doped CdO films are analyzed by varying the dopant concentration in the solution. The structural study shows the polycrystalline nature and cubic structure of undoped and B doped CdO thin films. Surface morphological study reveals that the grains are spherical in shape. Optical and electrical studies showed n-type semiconducting nature and optical band gap of 2.44 eV of deposited thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron phosphide under pressure: In situ study by Raman scattering and X-ray diffraction

Cubic boron phosphide, BP, has been studied in situ by X-ray diffraction and Raman scattering up to 55 GPa at 300 K in a diamond anvil cell. The bulk modulus of B{sub 0} = 174(2) GPa has been established, which is in excellent agreement with our ab initio calculations. The data on Raman shift as a function of pressure, combined with equation-of-state (EOS) data, allowed us to estimate the Grüneisen parameters of the TO and LO modes of zinc-blende structure, γ{sub G}{sup TO }= 1.26 and γ{sub G}{sup LO }= 1.13, just like in the case of other A{sup III}B{sup V} diamond-like phases, for which γ{sub G}{sup TO }> γ{sub G}{sup LO }≅ 1. We also established that the pressure dependence of the effective electro-optical constant α is responsible for a strong change in relative intensities of the TO and LO modes from I{sub TO}/I{sub LO} ∼ 0.25 at 0.1 MPa to I{sub TO}/I{sub LO} ∼ 2.5 at 45 GPa, for which we also find excellent agreement between experiment and theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cat-doping: Novel method for phosphorus and boron shallow doping in crystalline silicon at 80 °C

Phosphorus (P) or boron (B) atoms can be doped at temperatures as low as 80 to 350 °C, when crystalline silicon (c-Si) is exposed only for a few minutes to species generated by catalytic cracking reaction of phosphine (PH₃) or diborane (B₂H₆) with heated tungsten (W) catalyzer. This paper is to investigate systematically this novel doping method, “Cat-doping”, in detail. The electrical properties of P or B doped layers are studied by the Van der Pauw method based on the Hall effects measurement. The profiles of P or B atoms in c-Si are observed by secondary ion mass spectrometry mainly from back side of samples to eliminate knock-on effects. It is confirmed that the surface of p-type c-Si is converted to n-type by P Cat-doping at 80 °C, and similarly, that of n-type c-Si is to p-type by B Cat-doping. The doping depth is as shallow as 5 nm or less and the electrically activated doping concentration is 10¹⁸ to 10¹⁹cm⁻³ for both P and B doping. It is also found that the surface potential of c-Si is controlled by the shallow Cat-doping and that the surface recombination velocity of minority carriers in c-Si can be enormously lowered by this potential control.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of defects in the process of graphene growth on hexagonal boron nitride from atomic carbon

Hexagonal boron nitride (h-BN) is an attractive substrate for graphene, as the interaction between these materials is weak enough for high carrier mobility to be retained in graphene but strong enough to allow for some epitaxial relationship. We deposited graphene on exfoliated h-BN by molecular beam epitaxy (MBE), we analyzed the atomistic details of the process by ab initio density functional theory (DFT), and we linked the DFT and MBE results by random walk theory. Graphene appears to nucleate around defects in virgin h-BN. The DFT analysis reveals that sticking of carbon to perfect h-BN is strongly reduced by desorption, so that pre-existing seeds are needed for the nucleation. The dominant nucleation seeds are C{sub N}C{sub B} and O{sub N}C{sub N} pairs and B{sub 2}O{sub 3} inclusions in the virgin substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab-initio calculation study on the formation mechanism of boron-oxygen complexes in c-Si

Boron-oxygen (B-O) complex in crystalline silicon (c-Si) solar cells is responsible for the light-induced efficiency degradation of solar cell. However, the formation mechanism of B-O complex is not clear yet. By Ab-initio calculation, it is found that the stagger-type oxygen dimer (O{sub 2i}{sup st}) should be the component of B-O complex, whose movement occurs through its structure reconfiguration at low temperature, instead of its long-distance diffusion. The O{sub 2i}{sup st} can form two stable “latent centers” with the B{sub s}, which are recombination-inactive. The latent centers can be evolved into the metastable recombination centers via their structure transformation in the presence of excess carriers. These results can well explain the formation behaviors of B-O complexes in c-Si.

36 MATERIALS SCIENCE↗