Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Batch processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Data-Driven Protection Software to classify fault locations by protective zone in distribution systems with high PV penetration

The software contains (a) the source codes to generate Point-on-Wave (PoW) transient data for any feeder model in Alternative Transient Program (ATP) format. Codes provide options to change different steady state settings, including the loading condition and PV capacity and transient state setting like faults type, location and initiation time (b) data post-processing source code to converted data from native format to COMTRADE, csv, HDF5 (c) Docker container to train CNN to classify fault locations by protective zone. The container takes dataset and other training parameters (sampling rate, training epochs, batch size etc) as input to train CNN. The container writes back the trained CNN model, training and testing metrics and plots to the local workstation

Ramesh, Meghana↗

CAZymes from the thermophilic fungus Thermoascus aurantiacus are induced by C5 and C6 sugars

Abstract Background Filamentous fungi are excellent lignocellulose degraders, which they achieve through producing carbohydrate active enzymes (CAZymes). CAZyme production is highly orchestrated and gene expression analysis has greatly expanded understanding of this important biotechnological process. The thermophilic fungus Thermoascus aurantiacus secretes highly active thermostable enzymes that enable saccharifications at higher temperatures; however, the genome-wide measurements of gene expression in response to CAZyme induction are not understood. Results A fed-batch system with plant biomass-derived sugars d -xylose, l -arabinose and cellobiose established that these sugars induce CAZyme expression in T. aurantiacus . The C5 sugars induced both cellulases and hemicellulases, while cellobiose specifically induced cellulases. A minimal medium formulation was developed to enable gene expression studies of T. aurantiacus with these inducers. It was found that d-xylose and l -arabinose strongly induced a wide variety of CAZymes, auxiliary activity (AA) enzymes and carbohydrate esterases (CEs), while cellobiose facilitated lower expression of mostly cellulase genes. Furthermore, putative orthologues of different unfolded protein response genes were up-regulated during the C5 sugar feeding together with genes in the C5 sugar assimilation pathways. Conclusion This work has identified two additional CAZyme inducers for T. aurantiacus , l -arabinose and cellobiose, along with d -xylose. A combination of biochemical assays and RNA-seq measurements established that C5 sugars induce a suite of cellulases and hemicellulases, providing paths to produce broad spectrum thermotolerant enzymatic mixtures.

09 BIOMASS FUELS↗

Exploration of Processing Parameters of Vacuum Assisted Micelle Confinement Synthesis of Spherical CL-20 Microparticles

We recently developed a vacuum assisted micelle confinement synthesis for spherical microparticles of CL-20 with outstanding monodispersity. These microparticles are promising energetic material for explosive devices with enhanced and predictable performances. In this paper, to facilitate further development and application of this synthesis, the particle growth process was monitored by in-situ dynamic light scattering measurements. The result was interpreted by a finite element model to obtain critical parameters. Finally, these parameters were then used to predict the behavior and product quality of batch synthesis under various operation conditions.

36 MATERIALS SCIENCE↗

Preparing NERSC users for Cori, a Cray XC40 system with Intel many integrated cores

The newest NERSC supercomputer Cori is a Cray XC40 system consisting of 2,388 Intel Xeon Haswell nodes and 9,688 Intel Xeon-Phi “Knights Landing” (KNL) nodes. Compared to the Xeon-based clusters NERSC users are familiar with, optimal performance on Cori requires consideration of KNL mode settings; process, thread, and memory affinity; fine-grain parallelization; vectorization; and use of the high-bandwidth MCDRAM memory. This paper describes our efforts preparing NERSC users for KNL through the NERSC Exascale Science Application Program, Web documentation, and user training. We discuss how we configured the Cori system for usability and productivity, addressing programming concerns, batch system configurations, and default KNL cluster and memory modes. Here, system usage data, job completion analysis, programming and running jobs issues, and a few successful user stories on KNL are presented.

97 MATHEMATICS AND COMPUTING↗

Synergistic maximization of the carbohydrate output and lignin processability by combinatorial pretreatment

Lignocellulosic biorefineries have gained much attention worldwide as a potential solution to the challenges of energy demand and global climate change. However, the industrial implementation of biorefineries has been hindered by low fermentable sugar yields and low lignin processability. Combinatorial pretreatments with a low holding temperature were investigated in an effort to synergistically improve the carbohydrate output and lignin processability from corn stover. Upon combinatorial pretreatment with 1% H 2 SO 4 for 30 min followed by 1% NaOH for 60 min at 120 °C, glucan and xylan conversion increased by 11.2% and 8.3% respectively relative to single pretreatment. This combinational pretreatment removed the amorphous portion, disrupted the rigid structure, and increased the water holding capacity of corn stover, thus increasing the hydrolysis performance. With whole fractionation by combinatorial pretreatment, glucose and xylose yields were 88.4% and 72.6%, respectively, representing increases of 10.0% and 8.1%. The lignin yield was 19.7% in the solid residue and 77.6% in the liquid stream, which increased by 33.4%. When grown in fed-batch fermentation mode, a record level of polyhydroxyalkanoate (PHA) concentration (1.0 g l –1 ) was obtained using lignin as a carbon source by Pseudomonas putida KT2440. Lignin characterization results showed that combinatorial pretreatment increased the G- and H-lignin content, reduced the β–β and β-O-4 groups, and fractionated more aromatic monomers, thus facilitating lignin processability into PHA. Furthermore, these results highlighted the use of combinational pretreatment at a low holding temperature as a means to synergistically maximize the carbohydrate output and lignin processability, which provides a unique set of features to improve the biorefining performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tetrafluoroboric Acid Digestion for Accurate Determination of Rare Earth Elements in Coal and Fly Ash by ICP-MS Analysis

Coal and coal-related fly ash often contain rare earth elements (REEs) that have the potential to be utilized as valuable mineral resources. Accurately determining the REE content in coal and fly ash is crucial for resource evaluation. The conventional approach involves using hydrofluoric acid (HF) to dissolve silicates and release REEs, which, however, prolongs the digestion process due to the additional step of complexing fluoride ions (F−) with boric acid (H3BO3). Determining the correct amount of H3BO3 for neutralization can be challenging, and in some instances, the binding of fluoride ions with certain lanthanides (Lns) hampers the accurate determination of all 14 naturally occurring rare earth elements in a single digestion batch by inductively coupled plasma mass spectrometry (ICP-MS). In this study, we present an alternative method that achieves the accurate determination of all 14 naturally occurring REEs using tetrafluoroboric acid (HBF4) followed by ICP-MS analysis. This approach eliminates the need for an F− complexing step. We tested this method on certified REE reference materials, including NIST 1632e (coal) and NIST 1633c (fly ash), as well as the REE geological reference material USGS AGV-1 (andesite). Our results demonstrated excellent recovery rates (relative standard deviation, RSD < ±10%), with a correlation coefficient (r2) exceeding 0.99. Using this method, we investigated the concentrations of all 14 REEs in coal and fly ash samples collected from various locations in the southwestern USA. This improved digestion technique streamlines the analysis process and enhances the accuracy of REE determination, facilitating a more comprehensive evaluation of REE-rich coal and fly ash deposits for resource exploration.

58 GEOSCIENCES↗

Isolation and conversion of electrolyte components into a value-added product

The overall objective of this work was to develop a process for effectively (i) recycling the electrolyte components from the end-of-life batteries and reduce the environmental hazard, (ii) understand the fundamental differences between pristine and recycled electrolyte components, (iii) electrochemically and analytically evaluate the recycled electrolyte components and (iv) establish deviations from the pristine electrolyte, and effectively separation of value-added product. We focused on determining scaling up the electrolyte recovery process by distillation of end-of-life batteries to get yield enough to use it for electrolyte formulation of reuse in the battery cell. The used cells from the ORNL battery manufacture facility (BMF)as well as received from the industry partner, Austin Elements Inc., was scaled to 10 used multilayered pouch cells in each batch of distillation and systematically separated and identified the electrolyte components of the used cells with FTIR and NMR studies. We were able to recovery 10g of solvent mass from the used pouch cells. NMR spectroscopy showed that the solvent was pure EMC,DMC and the sample was used to make a new battery cell. The end-of-life battery, it was noted that some cells were visually drier than the other cells and were more advanced in aged. In that case, even though the same distillation conditions were utilized, no usable mass of electrolyte solvent was recovered. It is expected that most of the solvent was decomposed during the battery charge-discharge cycling. The solid salt residue was separated by chemical and water treatment processes. Components of resulting solid product was analyzed by XRD and XPS measurements. The solid products are very much related to the salts used in the electrolyte solution.

25 ENERGY STORAGE↗

Isolation and Conversion of Electrolyte Components into a Value-Added Product

The overall objective of this work was to develop a process for effectively (i) recycling the electrolyte components from the end-of-life batteries and reduce the environmental hazard, (ii) understand the fundamental differences between pristine and recycled electrolyte components, (iii) electrochemically and analytically evaluate the recycled electrolyte components and (iv) establish deviations from the pristine electrolyte, and effectively separation of value-added product. We focused on determining scaling up the electrolyte recovery process by distillation of end-of-life batteries to get yield enough to use it for electrolyte formulation of reuse in the battery cell. The used cells from the ORNL battery manufacture facility (BMF) as well as received from the industry partner, Austin Elements Inc., was scaled to 10 used multilayered pouch cells in each batch of distillation and systematically separated and identified the electrolyte components of the used cells with FTIR and NMR studies. We were able to recovery 10g of solvent mass from the used pouch cells. NMR spectroscopy showed that the solvent was pure EMC, DMC and the sample was used to make a new battery cell. The end-of-life battery, it was noted that some cells were visually drier than the other cells and were more advanced in aged. In that case, even though the same distillation conditions were utilized, no usable mass of electrolyte solvent was recovered. It is expected that most of the solvent was decomposed during the battery charge-discharge cycling. The solid salt residue was separated by chemical and water treatment processes. Components of resulting solid product was analyzed by XRD and XPS measurements. The solid products are very much related to the salts used in the electrolyte solution.

25 ENERGY STORAGE↗

Comparative Study of Flash and Acid Hydrolysis of Microalgae (Scenedesmus sp.) for the Recovery of Biochemicals and Production of Porous Biocarbon Nanosheets

An integrated biorefinery concept is a novel and economical process intensification methodology for efficient utilization of biomass components. In this research, microalgae (Scenedesmus sp.) slurry with biomass concentration of 8.5 wt.% was parallelly fractionated using two techniques: 'flash hydrolysis (FH)' and 'acid hydrolysis (AH)'. FH was performed at 240 degrees C with a residence time of 10 +/- 2 s in a continuous flow reactor, whereas AH was performed at 155 degrees C and reaction time of 15 min in a batch reactor. About 63% of microalgal biomass was solubilized in liquid hydrolysate through both FH and AH. However, AH had an advantage over FH in recovering microalgae proteins and carbohydrates. FAME recovery through solvent extraction from FH and AH derived wet solids (insoluble microalgae) was 40 and 63%, respectively. Finally, the FH- and AH-derived post extraction solid residue was thermally activated using K2CO3 to produce highly microporous biocarbon nanosheets with BET surface areas of 712 and 1289 m2 g-1, respectively. Overall, an integrated process was developed using two potential hydrolysis techniques to maximize utilization of microalgae components.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗

Analysis Of Condensate Samples In Support Of The Antifoam Degradation Study

The degradation of Antifoam 747 to form flammable decomposition products has resulted in declaration of a Potential Inadequacy in the Safety Analysis (PISA) for the Defense Waste Processing Facility (DWPF). Savannah River National Laboratory (SRNL) testing with simulants showed that hexamethyldisiloxane (HMDSO), trimethylsilanol (TMS), and 1-propanal are formed in the offgas from the decomposition of the antifoam. A total of ten DWPF condensate samples from Batch 735 and 736 were analyzed by SRNL for three degradation products and additional analytes. All of the samples were analyzed to determine the concentrations of HMDSO, TMS, and propanal. The results of the organic analysis found concentrations for propanal and HMDSO near or below the detection limits for the analysis. The TMS concentrations ranged from below detection to 11 mg/L. The samples from Batch 736 were also analyzed for formate and oxalate anions, total organic carbon, and aluminum, iron, manganese, and silicon. Most of the samples contained low levels of formate and therefore low levels of organic carbon. These two values for each sample show reasonable agreement in most cases. Low levels of all the metals (Al, Fe, Mn, and Si) were present in most of the samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ANALYSIS OF CONDENSATE SAMPLES IN SUPPORT OF THE ANTIFOAM DEGRADATION STUDY

The degradation of Antifoam 747 to form flammable decomposition products has resulted in declaration of a Potential Inadequacy in the Safety Analysis (PISA) for the Defense Waste Processing Facility (DWPF). Savannah River National Laboratory (SRNL) testing with simulants showed that hexamethyldisiloxane (HMDSO), trimethylsilanol (TMS), and 1-propanal are formed in the offgas from the decomposition of the antifoam. A total of ten DWPF condensate samples from Batch 735 and 736 were analyzed by SRNL for three degradation products and additional analytes. All of the samples were analyzed to determine the concentrations of HMDSO, TMS, and propanal. The results of the organic analysis found concentrations for propanal and HMDSO near or below the detection limits for the analysis. The TMS concentrations ranged from below detection to 11 mg/L. The samples from Batch 736 were also analyzed for formate and oxalate anions, total organic carbon, and aluminum, iron, manganese, and silicon. Most of the samples contained low levels of formate and therefore low levels of organic carbon. These two values for each sample show reasonable agreement in most cases. Low levels of all the metals (Al, Fe, Mn, and Si) were present in most of the samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of Low Enriched Uranium Nitride Kernels for TRISO Particle Irradiation Testing

A large batch of UN microspheres to be used as kernels for TRISO particle fuel was produced using carbothermic reduction and nitriding of a sol-gel feedstock bearing tailored amounts of low-enriched uranium (LEU) oxide and carbon. The process parameters, established in a previous study, produced phasepure NaCl structure UN with dissolved C on the N sublattice. The composition, calculated by refinement of the lattice parameter from X-ray diffraction, was determined to be UC 0.27 N 0.73 . The final accepted product weighed 197.4 g. The microspheres had an average diameter of 797±1.35 μm and a composite mean theoretical density of 89.9±0.5% for a solid solution of UC and UN with the same atomic ratio; both values are reported with their corresponding calculated standard error.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A dictionary learning algorithm for compression and reconstruction of streaming data in preset order

There has been an emerging interest in developing and applying dictionary learning (DL) to process massive datasets in the last decade. Many of these efforts, however, focus on employing DL to compress and extract a set of important features from data, while considering restoring the original data from this set a secondary goal. On the other hand, although several methods are able to process streaming data by updating the dictionary incrementally as new snapshots pass by, most of those algorithms are designed for the setting where the snapshots are randomly drawn from a probability distribution. In this paper, we present a new DL approach to compress and denoise massive dataset in real time, in which the data are streamed through in a preset order (instances are videos and temporal experimental data), so at any time, we can only observe a biased sample set of the whole data. Here, our approach incrementally builds up the dictionary in a relatively simple manner: if the new snapshot is adequately explained by the current dictionary, we perform a sparse coding to find its sparse representation; otherwise, we add the new snapshot to the dictionary, with a Gram-Schmidt process to maintain the orthogonality. To compress and denoise noisy datasets, we apply the denoising to the snapshot directly before sparse coding, which deviates from traditional dictionary learning approach that achieves denoising via sparse coding. Compared to full-batch matrix decomposition methods, where the whole data is kept in memory, and other mini-batch approaches, where unbiased sampling is often assumed, our approach has minimal requirement in data sampling and storage: i) each snapshot is only seen once then discarded, and ii) the snapshots are drawn in a preset order, so can be highly biased. Through experiments on climate simulations and scanning transmission electron microscopy (STEM) data, we demonstrate that the proposed approach performs competitively to those methods in data reconstruction and denoising.

97 MATHEMATICS AND COMPUTING↗

BETO 2021 Peer Review - ChemCatBio Data Hub 2.6.2.500

The goal of the ChemCatBio DataHub project is to accelerate the catalyst and process development cycle by developing transformational tools for prediction and collaboration in catalyst R&D. The project is currently focused on the development of the Catalyst Property Database (CPD), a free and public resource released in September 2020. The CPD was designed in response to the observation that when data, such as computed reaction energetics, is used in catalyst design, it is almost always generated by the researchers seeking to use it, even if similar data has been published previously. One barrier to data reuse that results in this duplication of effort is the difficult process of finding and applying published data, which can be slow, error-prone, and manual. The CPD seeks to overcome these challenges by creating a centralized, searchable database of quality catalyst property data. At present, the CPD contains computed adsorption energies for intermediates along catalytic pathways. During FY21 and FY22, development of the CPD continues with a focus on external users and meeting their requirements. A batch upload capability, training and curation procedures, user interviews, and a demonstration of the CPD's utility in accelerating catalyst research are planned. Overall, the Data Hub project and CPD aim to reduce the time and cost of catalyst research by harnessing the power of data in catalyst discovery.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Effects of Metal and Metal Ion on Biomethane Productivity during Anaerobic Digestion of Dairy Manure

To overcome major limiting factors of microbial processes in anaerobic digestion (AD), metal and metal ions have been extensively studied. However, there is confusion about the effects of metals and metal ions on biomethane productivity in previous research. In this study, Zn and Zn 2+ were selected as representatives of metals and metal ions, respectively, to investigate the effects on biomethane productivity. After the metals and metal ions at different concentrations were added to the batch AD experiments under the same mesophilic conditions, a Zn dose of 1 g/L and a Zn 2+ dose of 4 mg/L were found to cause the highest biomethane production, respectively. The results indicate that metal (Zn) and metal ion (Zn 2+ ) have different mechanisms to improve AD performance. There may be two possible explanations. To act as conductive materials in interspecies electron transfer (IET), relatively high doses of metals (e.g., 1 g/L of Zn, 10 g/L of Fe) are needed to bridge the electron transfer from syntrophic bacteria to methanogenic archaea in the AD process. As essential mineral nutrients, the AD system requires relatively low doses of metal ions (e.g., 4 mg/L of Zn 2+ , 5 mg/L of Fe 2+ ) to supplement the component of various enzymes that catalyze anaerobic reactions and transformations. This research will provide clear insight for selecting appropriate amounts of metals or metal ions to enhance biomethane productivity for industrial AD processes.

09 BIOMASS FUELS↗

REPORTABLE RADIONUCLIDES IN DWPF SLUDGE BATCH 7A (MACROBATCH 8)

The Waste Acceptance Product Specifications (WAPS) 1.2 require that the waste producer 'shall report the curie inventory of radionuclides that have half-lives longer than 10 years and that are, or will be, present in concentrations greater than 0.05 percent of the total inventory for each waste type indexed to the years 2015 and 3115.' As part of the strategy to meet WAPS 1.2, the Defense Waste Processing Facility (DWPF) will report for each waste type all radionuclides that have half-lives longer than 10 years and contribute greater than 0.01 percent of the total curie inventory from the time of production through the 1100 year period from 2015 through 3115. The initial list of radionuclides to be reported is based on the design-basis glass identified in the Waste Form Compliance Plan (WCP) and Waste Form Qualification Report. However, it is required that the list be expanded if other radionuclides with half-lives greater than 10 years are identified that meet the 'greater than 0.01% of the curie inventory' criterion. Specification 1.6 of the WAPS, International Atomic Energy Agency Safeguards Reporting for High Level Waste (HLW), requires that the ratio by weights of the following uranium and plutonium isotopes be reported: U-233, U-234, U-235, U-236, and U-238; and Pu-238, Pu-239, Pu-240, Pu-241, and Pu-242. Therefore, the complete list of reportable radionuclides must also include these sets of U and Pu isotopes - and the U and Pu isotopic mass distributions must be identified. The DWPF receives HLW sludge slurry from Savannah River Site (SRS) Tank 40. For Sludge Batch 7a (SB7a), the waste in Tank 40 contained a blend of the heel from Sludge Batch 6 (SB6) and the Sludge Batch 7 (SB7) material transferred to Tank 40 from Tank 51. This sludge blend is also referred to as Macrobatch 8. Laboratory analyses of a Tank 40 sludge sample were performed to quantify the concentrations of pertinent radionuclides in the SB7a waste. Subsequently, radiological decay and in-growth were calculated over the time period from 2015 to 3115. This provided a basis for characterizing the radionuclide content of SB7a over time and for identifying the 'reportable radionuclides.' Details of the characterization methodology and the analytical results are the focus of this report. This work was performed at the request of the Waste Solidification Engineering Department of Savannah River Remediation, initiated via Technical Task Request (TTR) HLW-DWPF-TTR-2010-0031. A minor revision in the reporting requirements was requested via a subsequent email communication. The work was conducted in accordance with the protocols identified in Task Technical and Quality Assurance Plan SRNL-RP-2010-01218 and Analytical Study Plan SRNL-RP-2010-01219. All of the raw data related to this scope have been recorded in laboratory notebook SRNL-NB-2011-00061. The overall goal of this task was to characterize the radionuclide content of the SB7a waste sufficiently to meet the WAPS and DWPF reporting requirements. The specific objectives were: (1) Quantify the current concentrations of all radionuclides impacting (or potentially-impacting) the total curie content between calendar years 2011 and 3115. Also quantify the current concentrations of other radionuclides specifically requested in the TTR or required by the WAPS. (2) Calculate future concentrations of decayed and in-grown radionuclides impacting the total curie content between calendar years 2015 and 3115; (3) Identify as 'reportable' all radionuclides contributing {ge} 0.01% of the total curie content from 2015 to 3115 and having half-lives {ge} 10 years.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Spectroscopic Monitoring of Spent Nuclear Fuel Reprocessing Streams: An Evaluation of Spent Fuel Solutions via Raman, Visible, and Near-Infrared Spectroscopy

The potential of using optical spectroscopic techniques, such as Raman and Visible/Near Infrared (Vis/NIR), for on-line process control and special nuclear materials accountability applications at a spent nuclear fuel reprocessing facility was evaluated. Availability of on-line real-time techniques that directly measure process concentrations of nuclear materials will enhance performance and proliferation resistance of the solvent extraction processes. Further, on-line monitoring of radiochemical streams will also improve reprocessing plant operation and safety. This report reviews current state of development of the spectroscopic on-line monitoring techniques for such solutions. To further examine applicability of optical spectroscopy for monitoring reprocessing solutions, segments of a spent nuclear fuel, with approximate burn-up values of 70 MWd/kgM, were dissolved in concentrated nitric acid and adjusted to varying final concentrations of HNO3. The resulting spent fuel solutions were batch-contacted with tributyl phosphate/dodecane organic solvent. The feed and equilibrium aqueous and loaded organic solutions were subjected to optical measurements. The obtained spectra showed the presence of the quantifiable Raman bands due to NO3- and UO22+ and Vis/NIR bands due to multiple species of Pu(IV), Pu(VI), Np(V), the Np(V)-U(VI) cation-cation complex, and Nd(III) in fuel solutions, justifying spectroscopic techniques as a promising methodology for monitoring spent fuel processing solutions in real-time. Quantitative evaluation of the fuel solution was performed based on spectroscopic measurements and compared to ICP-MS analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Used nuclear fuel separations process simulation and testing

Recent efforts in separations process simulation at Argonne have expanded from the traditional focus on solvent extraction flowsheet design in order to capture process dynamics and to simulate other components, processing and systems of a used nuclear fuel reprocessing plant. For example, the Argonne Model for Universal Solvent Extraction (AMUSE) code has been enhanced to make it both more portable and more readily extensible. Moving away from a spreadsheet environment makes the addition of new species and processes simpler for the expert user, which should enable more rapid implementation of chemical models that simulate evolving processes. The dyAMUSE (dynamic AMUSE) version allows the simulation of transient behavior across an extractor. Electrochemical separations have now been modeled using spreadsheet codes that simulate the electrochemical recycle of fast reactor fuel. The user can follow the evolution of the salt, products, and waste compositions in the electro-refiner, cathode processors, and drawdown as a function of fuel batches treated. To further expand capabilities in integrating multiple unit operations, a platform for linking mathematical models representing the different operations that comprise a reprocessing facility was adapted to enable systems-level analysis and optimization of facility functions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗