Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Understanding lattice defects to influence ferromagnetic order of ZnO nanoparticles by Ni, Cu, Ce ions

Future spintronics technologies based on diluted magnetic semiconductors (DMS) will rely heavily on a sound understanding of the microscopic origins of ferromagnetism in such materials. It remains unclear, however, whether the ferromagnetism in DMS is intrinsic - a precondition for spintronics - or due to dopant clustering. For this, we include a simultaneous doping from transition metal (Ni, Cu) and rare earth (Ce) ions in ZnO nanoparticles that increase the antiferromagnetic ordering to achieve high-T{sub c} ferromagnetism. Rietveld refinement of XRD patterns indicate that the dopant ions in ZnO had a wurtzite structure and the dopants, Ni{sup 2+}, Cu{sup 2+}, Ce{sup 3+} ions, are highly influenced the lattice constants to induce lattice defects. The Ni, Cu, Ce ions in ZnO have nanoparticles formation than nanorods was observed in pure sample. FTIR involve some organic groups to induce lattice defects and the metal-oxygen bonding of Zn, Ni, Cu, Ce and O atoms to confirm wurtzite structure. Raman analysis evaluates the crystalline quality, structural disorder and defects in ZnO lattice with doping. Photoluminescence spectra have strong near-band-edge emission and visible emission bands responsible for defects due to oxygen vacancies. The energy band gap is calculated using Tauc relation. Room temperature ferromagnetism has been described due to bound magnetic polarons formation with Ni{sup 2+}, Cu{sup 2+}, Ce{sup 3+} ions in ZnO via oxygen vacancies. The zero field and field cooling SQUID measurement confirm the strength of antiferromagnetism in ZnO. The field cooling magnetization is studied by Curie-Weiss law that include antiferromagnetic interactions up to low temperature. The XPS spectra have involve +3/+4 oxidation states of Ce ions to influence the observed ferromagnetism. - Graphical abstract: The lattice defects/vacancies attributed by Ni and Ce ions in the wurtzite ZnO structure are responsible in high T{sub c} -ferromagnetism due to long-range magnetic interactions with cluster and spin-glass type growth. - Highlights: • Lattice defects/vacancies attributed high T{sub c} –ferromagnetism. • Transition metal and rare earth ions deform the wurtzite ZnO lattice to induce defects. • Oxygen vacancies are more favorable than Zn with Ni, Cu, Ce into ZnO. • Defects assisted long-range ferromagnetism of doped ZnO include cluster and spin-glass growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Er{sup 3+} ions on the phase formation and properties of In{sub 2}O{sub 3}nanostructures crystallized upon microwave heating

Regular sized nanostructures of indium oxide (In{sub 2}O{sub 3}) were homogeneously grown using a facile route, i.e. a microwave-hydrothermal method combined with rapid thermal treatment in a microwave oven. The presence of Er{sup 3+} doping plays an important role in controlling the formation of cubic (bcc) and rhombohedral (rh) In{sub 2}O{sub 3} phases. The samples presented broad photoluminescent emission bands in the green-orange region, which were attributed to the recombination of electrons at oxygen vacancies. The photocatalytic activities of pure bcc-In{sub 2}O{sub 3} and a bcc-rh-In{sub 2}O{sub 3} mixture towards the UVA degradation of methylene blue (MB) were also evaluated. The results showed that Er{sup +3} doped In{sub 2}O{sub 3} exhibited the highest photocatalytic activity with a photonic efficiency three times higher than the pure oxide. The improved performance was attributed to the higher surface area, the greater concentration of electron traps due the presence of the dopant and the possible formation of heterojunctions between the cubic and rhombohedral phases. - Graphical abstract: Photodegradation curves as a function of irradiation time of the samples obtained upon rapid microwave heating. - Highlights: • Efficient and rapid microwave heating to obtain Er{sup 3+} doped In{sub 2}O{sub 3} nanostructures. • Er{sup 3+} ions doping is fundamental to stabilizing the crystalline rhombohedral phase. • Symmetry breaking induced by vacancies in the lattice leads to photoluminescence. • Surface area of doped sample was two times higher than the surface of pure oxide. • The presence of defects in the lattice structure favors photocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles study lone-pair effects of Sb (III)-S chromophore influence on SHG response in quaternary potassium containing silver antimony sulfides

First-principles studies of the geometric structures, electronic structures and optical properties of non-centrosymmetrical (NCS) KAg{sub 2}SbS{sub 4}, K{sub 2}AgSbS{sub 4} and K{sub 2}Ag{sub 3}Sb{sub 3}S{sub 7} and centrosymmetrical (CS) KAg{sub 2}SbS{sub 3} and K{sub 3}Ag{sub 9}Sb{sub 4}S{sub 12} have been performed by means of density functional theory. It is indicated that although they have similarity in their anionic groups and, the electronic structures, prominent features of the optical anisotropy or second-order nonlinear optical (NLO) susceptibilities are apparently different. The calculated birefringences are 0.0537, 0.0343, 0.1324, 0.2217 and 0.0604 which are attributed to the different anionic groups [SbS{sub 3}] and triangles [AgS{sub 3}]. Also, the calculated NLO responses are about 0.5×, 1.0× and 2.0× times than that commercial AgGaS{sub 2} (AGS, d{sub 36}=11 pm/V) for K{sub 2}AgSbS{sub 4}, KAg{sub 2}SbS{sub 4} and K{sub 2}Ag{sub 3}Sb{sub 3}S{sub 7}, respectively. In comparison with the absolute magnitude of second harmonic generation (SHG) coefficients, the order K{sub 2}Ag{sub 3}Sb{sub 3}S{sub 7}>KAg{sub 2}SbS{sub 4}>K{sub 2}AgSbS{sub 4} is clearly established in the SHG response. Further analysis based on the real-space atom-cutting method reveals that the main sources of the SHG properties of these compounds are from the Sb-S group, especially K{sub 2}Ag{sub 3}Sb{sub 3}S{sub 7} is mainly attributed to the lone pair stereochemical activity of Sb (III)-S group. - Graphical abstract: Compounds K{sub 2}AgSbS{sub 4}, KAg{sub 2}SbS{sub 4} and K{sub 2}Ag{sub 3}Sb{sub 3}S{sub 7} exhibit second-order NLO response: 15×, 30× and 62× times than that KDP (KH{sub 2}PO{sub 4}, d{sub 36}=0.39 pm/V), respectively. First-principles methods reveal that the large SHG response of K{sub 2}Ag{sub 3}Sb{sub 3}S{sub 7} is dominated by the Sb-S chromophore with lone pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of heterostructured BiOBr/Bi{sub 24}O{sub 31}Br{sub 10}/TiO{sub 2} photocatalyst by pyrolysis of MOF composite for dye degradation

The pyrolysis of metal-organic frameworks has emerged as a promising route to synthesize metal oxides with diverse phase compositions, morphologies, sizes and surface areas. The BiOBr/Bi{sub 24}O{sub 31}Br{sub 10}/TiO{sub 2} (BBT) heterostructures have been achieved for the first time by calcining BiOBr/MIL-125(Ti) composite at 500 °C in air. The BBT-2 composite exhibited the highest photocatalytic performance for degradation of RhB under visible light irradiation. The enhanced photocatalytic activity is attributed to narrower band-gaps and synergistic effect originating from the well-aligned straddling band-structures between BiOBr, Bi{sub 24}O{sub 31}Br{sub 10} and TiO{sub 2}, also result in an faster interfacial charge transfer during the photocatalytic reaction. This work could be conductive to the design of heterostructured photocatalysts contained metal oxide by pyrolytic conversion of metal-organic frameworks for significantly improved photocatalytic performance. - Graphical abstract: A novel BiOBr/Bi{sub 24}O{sub 31}Br{sub 10}/TiO{sub 2} heterostructure was achieved by calcining BiOBr/MIL-125(Ti) composite and exhibited the photocatalytic performance for degradation of RhB. Display Omitted - Highlights: • A novel BiOBr/Bi{sub 24}O{sub 31}Br{sub 10}/TiO{sub 2} heterostructure was achieved by calcining BiOBr/MIL-125(Ti) composite. • The heterostructure exhibited the photocatalytic performance for degradation of RhB. • The enhanced photocatalytic activity is attributed to synergistic effect between BiOBr, Bi{sub 24}O{sub 31}Br{sub 10} and TiO{sub 2}. • This work could be conductive to the design of heterostructured photocatalysts by pyrolytic conversion of MOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvothermal synthesis, electromagnetic and electrochemical properties of jellylike cylinder graphene-Mn{sub 3}O{sub 4} composite with highly coupled effect

Jellylike cylinder graphene-Mn{sub 3}O{sub 4} composite with highly coupled effect was successfully synthesized by a simple solvothermal process. Without using toxic reducing agent and expensive equipment, this method is environmental compatible and suitable for low cost mass production. High capacitance Mn{sub 3}O{sub 4} nanoparticles are homogeneously anchored on excellent conductivity graphene framework and a growth mechanism is hypothesized. Excellent electron conductivity and unique structure of Mn{sub 3}O{sub 4}-graphene composite give rise to various applications such as microwave absorber and electrode material. As a microwave absorber, the composite exhibits lowest reflection loss of −14.2 dB in the frequency range of 2–18 GHz. Good microwave absorption performance is due to the structure of the composite where conductive channels form between nano sized Mn{sub 3}O{sub 4} and high conductivity graphene with defects and dangling bonds. As for electrochemical property, Mn{sub 3}O{sub 4}-graphene composite with coupled effect shows excellent performance with highest specific capacitance of 246.7 F g{sup −1} in saturated K{sub 2}SO{sub 4} at a scan rate of 5 mV s{sup −1}. Good electrochemical property is also attributed to the structure with high utilization of Mn{sub 3}O{sub 4}, fast charge carrier transmission, and excellent electronic conductivity. This composite shows a promising application in absorbing materials and electrodes. - Graphical abstract: Graphene-Mn{sub 3}O{sub 4} composite. Display Omitted - Highlights: • Strongly coupled graphene-Mn{sub 3}O{sub 4} composite is synthesized by a solvothermal method. • Excellent microwave absorption property is ascribed to the composite structure. • Good capacitance performance is attributed to the structure and physical property. • The composite shows promising application in absorbing material, and electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of laser beam weldability of Inconel 738 superalloy

The susceptibility of pre-weld heat treated laser beam welded IN 738 superalloy to heat affected zone (HAZ) cracking was studied. A pre-weld heat treatment that produced the minimal grain boundary liquation resulted in a higher level of cracking compared to those with more intergranular liquation. This deviation from the general expectation of influence of intergranular liquation extent on HAZ microfissuring is attributable to the reduction in the ability of the base alloy to accommodate welding tensile stress that accompanied a pre-weld heat treatment condition designed to minimize intergranular liquation. Furthermore, in contrast to what has been generally reported in other nickel-based superalloys, a decrease in laser welding speed resulted in increased HAZ cracking in the IN 738, which can be attributed to exacerbated process instability at lower welding speeds.

36 MATERIALS SCIENCE↗

Carriers-mediated ferromagnetic enhancement in Al-doped ZnMnO dilute magnetic semiconductors

Nano-crystalline Zn{sub 0.95-x}Mn{sub 0.05}Al{sub x}O (x = 0, 0.05, 0.10) dilute magnetic semiconductors (DMS) were synthesized by sol-gel derived auto-combustion. X-ray diffraction (XRD) analysis shows that the samples have pure wurtzite structure typical of ZnO without the formation of secondary phases or impurity. Crystallite sizes were approximated by Scherrer formula while surface morphology and grain sizes were measured by field emission scanning electron microscopy. Incorporation of Mn and Al into the ZnO structure was confirmed by energy-dispersive X-ray analysis. Temperature dependent electrical resistivity measurements showed a decreasing trend with the doping of Al in ZnMnO, which is attributable to the enhancement of free carriers. Vibrating sample magnetometer studies confirmed the presence of ferromagnetic behavior at room temperature. The results indicate that Al doping results in significant variation in the concentration of free carriers and correspondingly the carrier-mediated magnetization and room temperature ferromagnetic behavior, showing promise for practical applications. We attribute the enhanced saturation magnetization and electrical conductivity to the exchange interaction mediated by free electrons.

36 MATERIALS SCIENCE↗

Assessment of local deformation using EBSD: Quantification of local damage at grain boundaries

Electron backscatter diffraction (EBSD) in conjunction with scanning electron microscopy was used to assess localization of the local misorientation to grain boundary. In order to quantify the degree of localization, a parameter, which was referred to as the grain boundary local misorientation, was proposed. Through crystal orientation measurements using deformed Type 316 stainless steel, it was shown that the grain boundary local misorientation increased with the applied plastic strain. Particularly, at several grain boundaries, the grain boundary local misorientation was more than 3 times the local misorientation averaged for the whole area. Surface observations revealed that the large local misorientation near the grain boundaries was attributed to the impeded slip steps rather than the number of slip steps observed on the surface. The magnitude of the grain boundary local misorientation had a week correlation with grain boundary length or grain boundary misorientation, and no correlation was found for twin boundaries. Finally, it was shown that the maximum grain boundary local misorientation could be estimated statistically, and the estimated maximum value for the specimen surface with an area of 80 mm{sup 2} was 10.6 times the averaged value. - Highlights: Black-Right-Pointing-Pointer The grain boundary local misorientation was proposed. Black-Right-Pointing-Pointer The maximum grain boundary local misorientation could be estimated statistically. Black-Right-Pointing-Pointer The large local misorientation was attributed to the impeded slip steps.

36 MATERIALS SCIENCE↗

Evaluation of strain caused by coherent precipitates in an Al alloy using TEM techniques

Elastic strains, caused by GP zones in an aged Al alloy, were determined quantitatively using two techniques: Dark Field In-line Holography (DFH) and High Resolution Transmission Electron Microscopy-Geometric Phase Analysis (HRTEM-GPA). The results obtained by both techniques showed that the elastic strain was not uniform along the precipitate-matrix interface. In some areas, it was found that strain had negligible value and this was attributed to the loss of coherence between the lattices. It is suggested that a possible explanation for this fact could be a variation in the 'vacancies pump mechanism' kinetics. To obtain a better interpretation of the experimental deformation maps, a reference GP precipitate-matrix structure was built using QSTEM software. The main advantages of DFH over HRTEM-GPA were a bigger field of view and low electron dose requirements without spatial resolution loss. Another difference found was that crystalline defects such as dislocations were evidenced by HRTEM-GPA in contrast to the result obtained by DFH. However, strain measurements were affected by mask size effect in the former. - Highlights: Black-Right-Pointing-Pointer Strain around GP precipitates was not uniform and was in a more relaxed state. Black-Right-Pointing-Pointer Strain values determined by HRTEM had more artifacts compared with holography ones. Black-Right-Pointing-Pointer Strain distribution was attributed to differences in the release of vacancies. Black-Right-Pointing-Pointer Holography showed important advantages over HRTEM regarding field of view mainly.

36 MATERIALS SCIENCE↗

Binder characterisation of mortars used at different ages in the San Lorenzo church in Milan

The paper describes a study on the mortars of the basilica of San Lorenzo in Milan, which was carried out to support an archaeological study aimed at dating and documenting the construction techniques used throughout the centuries. The church, which was founded between the 4th and 5th century, at the end of the period when Milan was the capital of the Roman Empire, was subjected in time to extensions, collapses and reconstructions that lasted until the Renaissance period and even later on. Thanks to the good state of conservation, San Lorenzo church is a collection of materials and construction techniques throughout a period of more than a millennium. Mortars were investigated in order to compare the binders used for structural elements built in different historical ages. From an archaeological study, samples of mortars attributed to the late Roman period, the Middle Ages and the Renaissance were available. The binder of each sample was separated by the aggregates and it was characterised on the basis of X-ray diffraction analysis, thermogravimetric analysis and scanning electron microscopy. Constituents of the binder were identified and their origin is discussed in order to investigate if they could be attributed to the original composition of the binder or to possible alteration in time due to atmospheric pollution. Results show that, even though the binder is mainly based on magnesian lime, there are significant differences in the microstructure of the binding matrix used in mortars ascribed to the different historical periods. In the Roman period, in correspondence of the structural elements that required higher strength, also hydraulic cocciopesto mortars were detected. Gypsum was found in most samples, which was maybe added intentionally. - Highlights: • Binders of mortars of San Lorenzo church in Milan were investigated. • Roman, Middle Ages and Renaissance samples were studied by XRD, TG and SEM. • Magnesian-lime binders containing silico-aluminates were used in all periods. • Cocciopesto hydraulic mortars were used only in the Roman period. • Gypsum was found in most samples, which was maybe added intentionally.

36 MATERIALS SCIENCE↗

Investigation of the photoactivity of pristine and mixed phase N-doped titania under visible and solar irradiation

Nitrogen doped titania nano-particles were synthesized by sol–gel method with an aim to investigate the impact of doping in titanium matrix and the titania phases on their photocatalytic activity under visible and solar irradiation. The structural, optical and chemical characterization of the prepared materials were done using X-ray diffraction analysis, scanning electron microscopy, UV–visible diffuse reflectance spectroscopy, photoluminescence spectroscopy, and Fourier transform infrared spectroscopy. The samples were calcined at different temperatures (200 °C–600 °C) to obtain different phases. All the samples showed red-shift in the visible region attributable to the doping of nitrogen in the titania matrix. The samples calcined at low temperatures showed high photocatalytic activity compared to the high temperature samples. The enhancement in the visible light activity may be attributed to the large amount of nitrogen present in the surface region of the catalyst and reduced carrier recombination. Among the high temperature samples the high activity may be due to the presence of mixed phase as well. - Highlights: • Pristine and mixed phases of N doped titania synthesized at different temperatures. • High visible light photoactivity exhibited by pristine rutile phase and mixed phase. • Role of surface N in rutile and matrix embedded N in other samples corroborated.

36 MATERIALS SCIENCE↗

Tribological properties of self-lubricating NiAl/Mo-based composites containing AgVO{sub 3} nanowires

Silver vanadate (AgVO{sub 3}) nanowires were synthesized by hydrothermal method and self-lubricating NiAl/Mo-AgVO{sub 3} composites were fabricated by powder metallurgy technique. The composition and microstructure of NiAl/Mo-based composites were characterized and the tribological properties were investigated from room temperature to 900 °C. The results showed that NiAl/Mo-based composites were consisted of nanocrystalline B2 ordered NiAl matrix, Al{sub 2}O{sub 3}, Mo{sub 2}C, metallic Ag and vanadium oxide phase. The appearance of metallic Ag and vanadium oxide phase can be attributed to the decomposition of AgVO{sub 3} during sintering. Wear testing results confirmed that NiAl/Mo-based composites have excellent tribological properties over a wide temperature range. For example, the friction coefficient and wear rate of NiAl/Mo-based composites containing AgVO{sub 3} were significantly lower than the composites containing only metallic Mo or AgVO{sub 3} lubricant when the temperature is above 300 °C, which can be attributed to the synergistic lubricating action of metallic Mo and AgVO{sub 3} lubricants. Furthermore, Raman results indicated that the composition on the worn surface of NiAl-based composites was self-adjusted after wear testing at different temperatures. For example, Ag{sub 3}VO{sub 4} and Fe{sub 3}O{sub 4} lubricants were responsible for the improvement of tribological properties at 500 °C, AgVO{sub 3}, Ag{sub 3}VO{sub 4} and molybdate for 700 °C, and AgVO{sub 3} and molybdate for 900 °C of NiAl-based composites with the addition of metallic Mo and AgVO{sub 3}. - Highlights: • NiAl/Mo-AgVO{sub 3} nanocomposites were prepared by mechanical alloying and sintering. • AgVO{sub 3} decomposed to metallic Ag and vanadium oxide during the sintering process. • NiAl/Mo-AgVO{sub 3} exhibited superior tribological properties at a board temperature range. • Phase composition on the worn surface was varied with temperatures. • Self-adjusted action was responsible for the improvement of tribological properties.

36 MATERIALS SCIENCE↗

XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting

Selective Electron Beam Melting (SEBM) is a promising powder bed Additive Manufacturing technique for near-net-shape manufacture of high-value titanium components. However without post-manufacture HIPing the fatigue life of SEBM parts is currently dominated by the presence of porosity. In this study, the size, volume fraction, and spatial distribution of the pores in model samples have been characterised in 3D, using X-ray Computed Tomography, and correlated to the process variables. The average volume fraction of the pores (< 0.2%) was measured to be lower than that usually observed in competing processes, such as selective laser melting, but a strong relationship was found with the different beam strategies used to contour, and infill by hatching, a part section. The majority of pores were found to be small spherical gas pores, concentrated in the infill hatched region; this was attributed to the lower energy density and less focused beam used in the infill strategy allowing less opportunity for gas bubbles to escape the melt pool. Overall, increasing the energy density or focus of the beam was found to correlate strongly to a reduction in the level of gas porosity. Rarer irregular shaped pores were mostly located in the contour region and have been attributed to a lack of fusion between powder particles. - Graphical abstract: Display Omitted - Highlights: • Vast majority of defects detected were small spherical gas pores. • Gas bubbles trapped in the powder granules expand and coalesce in the melt pool. • Pores have been shown not to be randomly distributed. • Larger and deeper melt pools give more opportunity for gas to escape. • Minor changes to melt strategy result in significant reductions in pore population.

36 MATERIALS SCIENCE↗

Development of mechanical properties in a CaO added AZ31 magnesium alloy processed by equal-channel angular pressing

Processing through the application of equal-channel angular pressing (ECAP) is recognized as one of the attractive severe plastic deformation techniques where the processed bulk metals generally achieve ultrafine-grained microstructure leading to improved physical characteristics and mechanical properties. Magnesium has received much attention to date for its lightweight, high strength and excellent elasticity. Mg alloys with addition of CaO is reported to provide the successful casting procedure without usage of greenhouse gas, SF{sub 6}, whereas it is generally used for preventing the oxidation of Mg during casting. In the present investigation, a CaO added AZ31 (AZ31-CaO) magnesium alloy was processed by ECAP at elevated temepratures with a few steps of reduction which result in significant grain refinement to ~ 1.5 μm after 6 passes. Compression testing at room temperature demonstrated the AZ31-CaO alloy after ECAP showed enhanced yield strength more than the as-processed commercial AZ31 alloy while both alloys maintained ductility in spite of significant reduction in grain size. The improved strength in the AZ31-CaO alloy was attributed to the formation of fine Al{sub 2}Ca precipitates which experience breaking-up through ECAP and accelerate the microstructural refinement. Moreover, the preservation of ductility was attributed to the enhancement of strain hardening capability in the AZ31 alloy at room temperature. This study discusses the feasibility of using ECAP to improve both strength and ductility on magnesium alloys by applying the diagram describing the paradox of strength and ductility. - Highlights: • AZ31 and AZ31-CaO magnesium alloys were processed by ECAP up to 6 passes. • AZ31-CaO alloy after ECAP showed improved yield strength without losing ductility. • CaO in AZ31 forms fine Al{sub 2}Ca accelerating microstructural refinement during ECAP. • Feasibility of using ECAP was shown to improve both strength and ductility in Mg.

36 MATERIALS SCIENCE↗

Microstructure evolution of a dissimilar junction interface between an Al sheet and a Ni-coated Cu sheet joined by magnetic pulse welding

An Al sheet and a Ni-coated Cu sheet were lap joined by using magnetic pulse welding (MPW). Tensile tests were performed on the joined sheets, and a good lap joint was achieved at a discharge energy of > 0.9 kJ. The weld interface exhibited a wavy morphology and an intermediate layer along the weld interface. Microstructure observations of the intermediate layer revealed that the Ni coating region consisted of a Ni–Al binary amorphous alloy and that the Al sheet region contained very fine Al nanograins. Ni fragments indicative of unmelted residual Ni from the coating were also observed in parts of the intermediate layer. Formation of these features can be attributed to localize melting and a subsequent high rate cooling of molten Al and Ni confined to the interface during the MPW process. In the absence of an oxide film, atomic-scale bonding was also achieved between the intermediate layer and the sheet surfaces after the collision. MPW utilises impact energy, which affects the sheet surfaces. From the obtained results, good lap joint is attributed to an increased contact area, the anchor effect, work hardening, the absence of an oxide film, and suppressed formation of intermetallic compounds at the interface. - Highlights: •Good lap joint of an Al sheet and a Ni-coated Cu sheet was achieved by using magnetic pulse welding. •A Ni–Al binary amorphous alloy was formed as an intermediate layer at weld interface. •Atomic-scale bonding was achieved between the intermediate layer and the sheet surfaces.

36 MATERIALS SCIENCE↗

Growth mechanism of extension twin variants during annealing of pure magnesium: An ‘ex situ’ electron backscattered diffraction investigation

Pure magnesium was subjected to plastic deformation through CSM (continuous stiffness measurement) indentation followed by annealing at 200 °C for 30 min. Nucleation of no new grains was observed neither at the twin–twin intersections nor at the multiple twin variants of a grain after annealing. Significant growth of off-basal twin orientation compared to basal twin orientation was observed in the sample after annealing and is attributed to the partial coherent nature of twin boundary in the later case. Further, growth of twins was independent of the strain distribution between parent and twinned grains. - Highlights: • An ‘ex situ’ EBSD of pure Mg during annealing was investigated. • Nucleation of no new grains was observed. • Significant growth of off-basal twin orientation was observed. • Growth of twins may be attributed to the partial coherent nature of twin boundary.

36 MATERIALS SCIENCE↗

Influence of differential speed rolling ratio on the ridging behavior of ultra purified 17%Cr ferritic stainless steel

Highlights: • Differential rolling process improves ridging resistance of ferritic stainless steel. • Texture orientation inhomogeneity were attributed to non-uniform deformation. • Shear bands results in homogeneous deformation and recrystallization nucleation. • Uniform recrystallization grains and random orientation grains were obtained. - Abstract: The effect of the differential speed rolling on the ridging resistance and the crystallographic texture evolution of ultra purified 17%Cr ferritic stainless steel was investigated in order to select the optimal procedure for improving the surface quality. In the present study, the three different cold rolling processes were carried out: a conventional cold rolling and two different speed ratios asymmetric rolling. In the conventional cold rolling, the ridging of ferritic stainless steel was pronounced due to the band-like clusters of grains with similar crystallographic orientations. For differential speed rolling, ridging depth decreased and ridging was less pronounced when a higher different speed ratio was applied. The results show that severe ridging is attributed to the presence of band-like clusters of γ-fiber (<111>//ND) oriented grains. The shear bands introduced by differential speed rolling can enhance the nucleation for recrystallization both in grain interiors and grain boundaries, which can fragment the band-like clusters of similar orientation effectively, promoting the random grain orientation and improving surface quality.

36 MATERIALS SCIENCE↗

Evolution of microstructures and mechanical properties during solution treatment of a Ti–V–Mo-containing high‑manganese cryogenic steel

Highlights: • High-Mn cryogenic steels are getting the spotlight in the cryogenic market. • The grain size grew slowly and the yield strength remained almost stabilized with an increase of solutionizing temperature. • The Hall–Petch strengthening coefficient for yield strength was small, estimated to be 153 MPa μm{sup 0.5}. • The weakening effect of solutionizing temperature on grain size was attributed to the nano-sized (Ti, V, Mo)C precipitate. - Abstract: The effect of solution treatment on the microstructure and mechanical properties of a high‑manganese (Mn) twin-induced plastic (TWIP) cryogenic steel that was alloyed from elemental titanium (Ti), vanadium (V) and molybdenum (Mo) was investigated by a variety of techniques such as microstructural characterization, room tensile testing and − 196 °C impact testing. The austenite grain size grew slowly with an increase of the solutionizing temperature (ST). The relatively weak effect of the ST on the austenite grain size is attributed to the superior thermal stability and coarsening resistance of the (Ti, V, Mo)C precipitate, which hindered austenite grain growth. An increase in ST improved the low-temperature toughness (LTT) significantly and decreased the strain hardening rate (SHR), but had no significant effect on the yield strength. The Hall–Petch strengthening coefficient for yield strength was small, and was estimated to be 153 MPa μm{sup 0.5}. Undissolved large-sized chromium (Cr) carbide can deteriorate the LTT significantly. Because of its excellent mechanical properties, high-Mn steel that was alloyed by elemental Ti, V and Mo can be used to manufacture storage tanks for liquefied natural gas.

36 MATERIALS SCIENCE↗