Mark Peters Testifies for Congress on Nuclear Energy 5/19/10
Mark Peters, Deputy Lab Director at Argonne National Laboratory, testifies before Congress on advanced nuclear fuel cycle R&D and the DOE nuclear roadmap on May 19, 2010.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mark Peters, Deputy Lab Director at Argonne National Laboratory, testifies before Congress on advanced nuclear fuel cycle R&D and the DOE nuclear roadmap on May 19, 2010.
Commercial light-water reactor (LWR) operators and fuel vendors are pursuing advancements in fuel and reactor design that include increasing 235 U enrichment from low enrichment (<5 wt.% 235 U) to low-enriched uranium+ (LEU+) (10 wt.% > 235 U > 5 wt.%) and high-assay low-enriched uranium (HALEU) (20 wt.% > 235 U > 10 wt.%). These advancements will necessitate the ability to transport LEU+ and HALEU fuel materials. Assessment of Existing Transportation Packages for Use with HALEU(ORNL/TM-2020/1725) assesses the potential to use currently licensed transportation packages for the transportation of HALEU by evaluating a representative package for each uranium fuel form category (for example, oxide and/or metal in fuel assemblies, fuel pins, powder, pellets, and uranium hexafluoride [UF 6 ].) This report expands on the UF 6 analysis.
The advances in polymer electrolyte fuel cell (PEFC) technologies over the past few decades and particularly over the past few years, have been very impressive. The promise of PEFC-based fuel cell electric vehicles (FCEVs) as long range EVs of zero emissions, high conversion efficiency, and fit for use of fuels from renewable sources, was recognized by pioneers of this technology some 40 years ago, facing at the time significant skepticism. The eventual commercial introduction of FCEVs in 2015 was enabled by the impressive accomplishments of scientists, engineers, and policymakers over that period of time. Among those responsible for the fuel cell community's success, few, if any, have had more impact than Dr. Shimshon Gottesfeld. He is a distinguished fuel cell educator, a passionate fuel cell and alternative fuel advocate, and a pioneering fuel cell innovator, responsible for several critical contributions that helped demonstrate the commercial viability of polymer electrolyte fuel cells. His impact on the field is seen through specific technical accomplishments, the scientists he has mentored, the teams he has led in different topical areas, and his activities as organizer and speaker in technical fuel cell meetings. We are honored to dedicate this focus issue of the Journal of The Electrochemical Society, entitled 'Advances in Modern Polymer Electrolyte Fuel Cells in Honor of Shimshon Gottesfeld,' to Dr. Gottesfeld for his accomplishments in the area of PEFC science and technology.
Recent growth in private sector interest and investment in advanced reactor designs signals a new period in the greater than six decade pursuit of commercial nuclear technology. This nuclear entrepreneurship is primarily centered in the North America; meanwhile, national programs in China, France, India, Russia, and South Korea also feature active efforts to design, construct, operate and export advanced reactors .The business case for most private ventures calls for an aggressive commercialization timeline-tied to expectations for returns on investment. Finally, strategic energy portfolio projections and utility resource planning point to the 2030 - 2050 window as the period of greatest need for dispatchable, energy intensive, low-carbon generation options to address retirement of baseload capacity, increased penetration of renewables and economy-scale decarbonization. However, lead times for commercialization range from 30 to 50 years based on more traditional government-centric timelines. Fuel development and fuel cycle infrastructure deployment represent parallel timelines that directly influence the timeline for commercialization of many advanced reactor concepts. While multi-decade development periods appear to be commonplace for new nuclear projects, such timelines were not always the norm-three separate countries set out to develop civilian commercial power from fundamental nuclear principles, in just over a decade, on average. The US led light-water reactor (LWR) development in the 1950's, the UK pioneered a gas-cooled reactor (GCR) concept in the same time period, and Canada forged the path to commercializing the heavy-water reactor (HWR) starting in the mid-1950's and into the mid-1960's. The necessary fuel cycle facilities to support the commercial reactor design also did not appear suddenly, but were a collaborative effort between government and private partners. In this paper, the efforts of these three governments and their private industry partnerships in reactor and fuel cycle development are explored, and a select sample of representative milestones for each is presented, with the roles that each group played. (authors)
Thermal gap conductance refers to overall heat conductance through a gas-filled gap as interface thermal resistance between the gas and surface has to be considered. The analysis of new ATR (Advanced Test Reactor) fuel experiments requires experimental data and models for the gap conductance of the cladding/fuel capsule gap, which typically varies from 5 μm to 50 μm and is filled with He at 1-3 atm. Although past research has studied the gap conductance between UO{sub 2} fuel and Zircaloy cladding, new experiments are needed to provide the gap conductance data between HT9 and stainless steel 316, and between advanced fuels and advanced cladding in the Accident Tolerant Fuels program. In this paper, the laser flash method is modified to measure the gap conductance. The gap is formed by welding two stainless steel 316 disks with three spacers. The temperature at the rear surface, after exposure to the laser pulse at the front surface, is modeled with 1D heat transfer through three layers. The analytic solution is then fitted with the measured temperature to determine gap conductance. The sensitivity analysis based on the 1D assumption and 3D numerical simulations were performed to assess the sensitivity and uncertainty of the measurement. It is concluded the heat capacity of the gas in the gap has minimal impact on the measurement, which indicates that the thermal property determined by this method is the thermal conductance, instead of the thermal diffusivity. Convective heat loss through sidewalls under the current experimental design has insignificant influences. Heat transfer through spacers may cause up to 10% overestimation of thermal gap conductance, but the effects can be mostly eliminated by the design of grooves on samples. The result established a pathway for gap conductance determination. (authors)
Advanced processing methods for UO{sub 2}-based used nuclear fuels have been developed and demonstrated in several experimental programs at the Oak Ridge National Laboratory's Radiochemical Engineering Development Center (REDC). The Consolidated Fuel Recycle Program (1979-1986) and the Advanced Fuel Cycle Initiative (2002- 2008) were sponsored by the U.S. Department of Energy Office of Nuclear Energy (DOE/NE). Currently, DOE/NE is administering a new program for the National Aeronautics and Space Administration to produce {sup 238}Pu by irradiating NpO{sub 2}, and the irradiated targets are to be chemically processed using the same equipment and shielded facilities in the REDC that were used previously to process irradiated UO{sub 2}-based fuels. Flowsheets for processing irradiated NpO{sub 2} targets are now being developed and demonstrated. There are both similarities and differences in the processing of the two types of irradiated fuels/targets, and a comparison of these is useful for application to new types of feed material. A comparison of similarities and differences for processing UO{sub 2}- and NpO{sub 2}-based feed materials has been useful in planning for advanced processing methods and new requirements. Use of existing multistage solvent extraction equipment and shielded processing facilities at the ORNL REDC has enabled development, demonstration, and application of new and improved separations methods. (authors)
A method of preparing advanced membrane electrode assemblies (MEA) for use in fuel cells. A base polymer is selected for a base membrane. An electrode composition is selected to optimize properties exhibited by the membrane electrode assembly based on the selection of the base polymer. A property-tuning coating layer composition is selected based on compatibility with the base polymer and the electrode composition. A solvent is selected based on the interaction of the solvent with the base polymer and the property-tuning coating layer composition. The MEA is assembled by preparing the base membrane and then applying the property-tuning coating layer to form a composite membrane. Finally, a catalyst is applied to the composite membrane.
A method of preparing advanced membrane electrode assemblies (MEA) for use in fuel cells. A base polymer is selected for a base membrane. An electrode composition is selected to optimize properties exhibited by the membrane electrode assembly based on the selection of the base polymer. A property-tuning coating layer composition is selected based on compatibility with the base polymer and the electrode composition. A solvent is selected based on the interaction of the solvent with the base polymer and the property-tuning coating layer composition. The MEA is assembled by preparing the base membrane and then applying the property-tuning coating layer to form a composite membrane. Finally, a catalyst is applied to the composite membrane.
The U.S. Department of Energy’s Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) project is nearing the final phase of developing several advanced nondestructive assay (NDA) instruments designed to measure spent nuclear fuel assemblies for the purpose of improving nuclear safeguards. Current efforts are focusing on calibrating several of these instruments with spent fuel assemblies at two international spent fuel facilities. Modelling and simulation is expected to play an important role in predicting nuclide compositions, neutron and gamma source terms, and instrument responses in order to inform the instrument calibration procedures. As part of NGSI-SF project, this work was carried out to assess the impacts of uncertainties in the nuclear data used in the calculations of spent fuel content, radiation emissions and instrument responses. Nuclear data is an essential part of nuclear fuel burnup and decay codes and nuclear transport codes. Such codes are routinely used for analysis of spent fuel and NDA safeguards instruments. Hence, the uncertainties existing in the nuclear data used in these codes affect the accuracies of such analysis. In addition, nuclear data uncertainties represent the limiting (smallest) uncertainties that can be expected from nuclear code predictions, and therefore define the highest attainable accuracy of the NDA instrument. This work studies the impacts of nuclear data uncertainties on calculated spent fuel nuclide inventories and the associated NDA instrument response. Recently developed methods within the SCALE code system are applied in this study. The Californium Interrogation with Prompt Neutron instrument was selected to illustrate the impact of these uncertainties on NDA instrument response.
This fact sheet provides an overview of the U.S. Department of Energy's (DOE's) Vehicle Technologies Office Clean Cities coalitions, which advance affordable, domestic transportation fuels and technologies nationwide. Nearly 100 coalitions serve as the foundation of Clean Cities, working in communities across the country to help local decision makers and fleets understand and implement alternative and renewable fuels, idle-reduction measures, fuel economy improvements, new mobility choices, and emerging transportation technologies. At the national level, VTO develops and promotes publications, tools, and other unique resources to support coordinators. At the local level, coalitions leverage these resources to create networks of stakeholders.
This fact sheet provides an overview of the U.S. Department of Energy's (DOE's) Vehicle Technologies Office Clean Cities Coalition Network, which advances affordable, domestic transportation fuels and technologies nationwide. More than 75 active coalitions serve as the foundation of Clean Cities, working in communities across the country to help local decision makers and fleets understand and implement alternative and renewable fuels, idle-reduction measures, fuel economy improvements, new mobility choices, and emerging transportation technologies. At the national level, VTO develops and promotes publications, tools, and other unique resources to support coordinators. At the local level, coalitions leverage these resources to create networks of stakeholders.
This fact sheet provides an overview of the U.S. Department of Energy's (DOE's) Vehicle Technologies Office Clean Cities Coalition Network, which advances affordable, domestic transportation fuels and technologies nationwide. More than 75 active coalitions serve as the foundation of Clean Cities, working in communities across the country to help local decision makers and fleets understand and implement alternative and renewable fuels, idle-reduction measures, fuel economy improvements, new mobility choices, and emerging transportation technologies. At the national level, VTO develops and promotes publications, tools, and other unique resources to support coordinators. At the local level, coalitions leverage these resources to create networks of stakeholders.
This fact sheet provides an overview of the U.S. Department of Energy's (DOE's) Vehicle Technologies Office Clean Cities Coalition Network, which advances affordable, domestic transportation fuels and technologies nationwide. More than 75 active coalitions serve as the foundation of Clean Cities, working in communities across the country to help local decision makers and fleets understand and implement alternative and renewable fuels, idle-reduction measures, fuel economy improvements, new mobility choices, and emerging transportation technologies. At the national level, VTO develops and promotes publications, tools, and other unique resources to support coordinators. At the local level, coalitions leverage these resources to create networks of stakeholders.
Dramatic advances in materials characterization capabilities over the last few years enabled microstructural and chemical 3D characterization of specimens at the atomic-scale with unprecedented quantitative precision and high data collection rates. These improvements allow for the transition of electron tomography (ET) and atom probe tomography (APT) techniques to a much broader research field and their implementation in the characterization of nuclear fuels and highly radioactive materials. Nanoscale characterization has been widely developed for non-nuclear applications, yet in the nuclear arena, particularly for fuels, these modern characterization techniques have not been applied in concert to elucidate fundamental material behavior in metal fuel. In this work, we present cross-correlated APT and ET data and provide atomic-scale representations of microstructure and chemistry of nuclear fuels, which is essential in the validation of current and future atomistic and meso-scale modeling efforts. A firm understanding of microstructural evolution in reactor materials is imperative and will lead to deeper understanding of in-reactor degradation behavior, creating a new generation of radiation-resistant materials and fuels with the potential for significant increases in burn-up. In summary, two complementary techniques were used to characterize phases formed as a result of interdiffusion between U-Pu-Zr metal fuel and cladding and fission gas bubbles produced in U-Mo fuel upon irradiation. Understanding in-reactor degradation behavior of these materials is critical to advancing nuclear energy technology. (authors)
The principal effort under this program was directed at the fuel cell stack technology required to accomplish the initial feasibility demonstrations of increased cell stack operating pressures and temperatures, increased cell active area, incorporation of the ribbed substrate cell configuration at the bove conditions, and the introduction of higher performance electrocatalysts. The program results were successful with the primary accomplishments being: (1) fabrication of 10 sq ft ribbed substrate, cell components including higher performing electrocatalysts; (2) assembly of a 10 sq ft, 30-cell short stack; and (3) initial test of this stack at 120 psia and 405 F. These accomplishments demonstrate the feasibility of fabricating and handling large area cells using materials and processes that are oriented to low cost manufacture. An additional accomplishment under the program was the testing of two 3.7 sq ft short stacks at 12 psia/405 F to 5400 and 4500 hours respectively. These tests demonstrate the durability of the components and the cell stack configuration to a nominal 5000 hours at the higher pressure and temperature condition planned for the next electric utility power plant.
This fact sheet provides an overview of the U.S. Department of Energy's (DOE's) Vehicle Technologies Office Clean Cities coalitions, which advance affordable, domestic transportation fuels and technologies nationwide. Nearly 100 coalitions serve as the foundation of Clean Cities, working in communities across the country to help local decision makers and fleets understand and implement alternative and renewable fuels, idle-reduction measures, fuel economy improvements, new mobility choices, and emerging transportation technologies. At the national level, VTO develops and promotes publications, tools, and other unique resources to support coordinators. At the local level, coalitions leverage these resources to create networks of stakeholders.
A coordinated group of more than 75 active coalitions serve as the foundation of Clean Cities, working in communities across the country to help local decision makers and fleets understand and implement alternative and renewable fuels, idle-reduction measures, fuel economy improvements, new mobility choices, and emerging transportation technologies. The U.S. Department of Energy's (DOE) Vehicle Technologies Office (VTO) facilitates national coordination of the coalitions through its Technology Integration Program. Together, Clean Cities coalitions and VTO focus on advancing affordable, domestic transportation fuels, energy efficient mobility systems, and other fuel-saving technologies and practices.
To accommodate the swelling of metallic fuels induced by the fission gas release during burnup in sodium fast reactor for a sodium-free fuel option, advanced U-10Zr fuels with controlled porosity were designed and demonstrated by spark plasma sintering. U-10Zr fuel pellets with manufactured porosities varying from 35% up to fully dense fuel pellets have been fabricated by controlling ball milling times of the starting uranium powders, sintering temperature, pressure, and duration, and the correlation among the microstructure control – porosity – sintering conditions has been established. To further mimick the pore structure in irradiated fuels, different pore formers (NaCl and NH4HCO3) have been used to control the pore size and distribution. Microstructure characterization indicates a lamellar reaction zone of U and Zr, differing from the arc-melted U-10Zr as a result of rapid consolidation of SPS at lower temperature and short durations. The thermal conductivity of U10Zr with different porosities are also measured. Here this work demonstrates the success in manufacturing new metallic fuel forms with controlled porosities and pore distribution, which can be used as model systems to investigate the thermal transfer behavior of metallic fuels in the reactor.