Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstracts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

(abstract) Gravity Investigation of the Manson Impact Structure, Iowa

The Manson Impact Structure (MIS) is located in northwest Iowa, has an age of approximately 74 Ma, and diameter of approximately 35 km. MIS is characterized by a central uplift of crystalline rock surounded by a depression filled with breccia and in turn surrounded by a terraced rim of slumped blocks. MIS is buried by glacial till; hence the geology must be studied through coring and geophysical techniques. Here, results of a gravity survey are reported. The residual gravity pattern is complicated by numerous highs and lows associated with density variations within the crystalline basement. The gravity data indicate a complex central uplift, perhaps a pitted central peak; a breccia unit approximately 3000 m thick surrounding the central uplift, and a diameter of about 35 km.

impact↗

(abstract) SEQ_POINTER: Next Generation, Planetary Spacecraft Remote Sensing Science Observation Design Tool

Implementation of a multimission tool, SEQ_POINTER, under the auspices of the JPL Multimission Operations Systems Office (MOSO) is in progress. This version has been designed to address the limitations experienced on previous versions when being adopted to a new mission and spacecraft. The tool has been modularly designed with subroutine interface structures to support interchangeable celestial body and spacecraft definition models. The computational and graphics modules have also been designed to interface with data collected from previous spacecraft, or on-going observations, which describe the surface of each target body. These enhancements make SEQ_POINTER a candidate for low-cost mission usage, when a remote sensing science observation design capability is required.

remote↗

(abstract) The Alpha-Proton-X-ray Spectrometer Deployment Mechanism -- An Anthropomorphic Approach to Sensor Placement on Martian Rocks and Soil

The Mars Pathfinder mission promises to reap a harvest of geological information about Mars. One of the nearly half dozen instruments making this science data possible is the alpha proton X ray spectrometer (APXS). Using a curium source and backscattering techniques, the APXS will determine the elemental composition of rocks and the soil around the landing site. To ensure information of high fidelity, the APXS sensor face must be aligned to within 20° to the surface of each rock and soil sampling location and be held there for up to 10 hours. This is accomplished through the anthropomorphic deployment mechanism (ADM). The ADM mounts on the back of the Mars rover. Working with the rover, the ADM both actively and passively positions the APXS sensor head against a chosen target. The ADM is an amalgamation of unique solutions to some very challenging design problems. The resulting design is light, flexible, and nearly autonomous. Its straightforward operation rivals that of the human arm in simplicity and elegance.

Mars↗

(abstract) Circumstellar Molecular Gas of the HH 1-2 and HH 24 Exciting Stars

13 CO and C 18 O observations of HH 1-2 VLA and SSV 63, the exciting stars of the HH 1-2 and HH 24 outflows, have been obtained with the Owens Valley Millimeter Array. The HH 1-2 source has been detected in both lines and in the 2.7 mm continuum. In the continuum, the central source appears unresolved in the 5" beam with a flux density of 20 mJy. A secondary peak of 8 mJy appears 12" SE of VLA 1. A strong peak of molecular line emission appears at the position of VLA 1. Molecular gas associated with SSV 63 has also been detected. Maps of circumstellar material of both sources will be presented.

circumstellar↗

(abstract) AMT Experiment Results

The Advanced Communications Technology Satellite (ACTS) Mobile Terminal (AMT) experiments have provided a terminal technology testbed for the evaluation of K- and Ka-band mobile satellite communications (satcom). Such a system could prove to be highly beneficial for many different commercial and government mobile satcom users. Combining ACTS' highly concentrated spotbeams with the smaller, higher-gain Ka-band antenna technology results in a system design that can support a much higher throughput capacity than today's commercial configurations. Baseline AMT performance results will be presented. In addition, observations on many of the application-specific experiments will also be provided.

communications↗

(abstract) Ulysses Orbit Determination at High Declinations

The trajectory of the Ulysses spacecraft carries it over the South polar region of the Sun in mid-1994, albeit at a great distance from the Sun itself. During this time the South Solar latitude of Ulysses' orbit reaches a maximum value of 80.2 degrees, and the geocentric declination reaches a magnitude of over 75 degrees. As a result, a number of unique and interesting events occur, not the least of which being that Ulysses never sets over the Canberra tracking station of the DSN for more than two months. A less obvious aspect of the Sun-spacecraft-Earth geometry during this time is the return of solar-induced nutation to the spin-stabilized Ulysses spacecraft, and the consequent use of active nutation control. Both of these events have significant implications for theory and practice of Ulysses' orbit determination during this period, which is the subject of the proposed paper.

orbit↗

(abstract) Satellite-Enhanced Personal Communications Experiments

As an initial step in exploring the opportunities afforded by the merger of satellite-based and land-based networks, Bellcore and JPL conducted several experiments utilizing NASA's Advanced Communications Technology Satellite (ACTS) and JPL's ACTS Mobile Terminal (AMT). Experimental goals fell into three categories: a) demonstrate personal communication applications, b) demonstrate interoperability among multiple wireless networks and the Public Switched Telecommunications Network (PSTN), and c) evaluate new protocol mechanisms for data communications using wireless links. We describe the performance of Point-of-Sale, e-mail, FAX, and call control applications, where the communication path passed through up to four networks: a wireless packet data network, the Satellite network, the PSTN, and a wireless cellular network. One important element of satellite-terrestrial interoperability is the efficiency of data communications protocols. Most protocols in use today (e.g., TCP/IP) have been optimized for wireline channels; their use over wireless networks presents significant new challenges. The characteristics of wireless channels -- increased error, longer packet delay, and limited bandwidth -- affect the design of the protocol. We describe experimental results for differing protocol mechanisms and parameters, such as acknowledgment schemes and packet sizes, that demonstrate the types of protocol needed for efficient use of wireless satellite-terrestrial networks.

personal↗

(abstract) Steady State Temperature Profile in a Cylinder Heated by Microwaves

We have developed a new theory to calculate the steady state temperature profile in a cylindrical sample positioned along the entire axis of a cylindrical microwave cavity. Temperature profiles were computed for alumina rods of various radii excited by one of the TM0n0 modes with n = 1, 2, or 3. Sample surface and center temperatures will be presented as a function of total sample absorbed power or electric field strength at the sample surface. An approach for attaining more uniform heating within the sample by reducing the magnitude of the inverted temperature profile using a concentric outer cylindrical tube will be discussed.

microwave↗

(abstract) Recent Developments in Active Microwave Systems at JPL

This paper provides an overview of some of the recent developments in active microwave systems at JPL. The first section summarizes the engineering and scientific results that were obtained from the two recent flights of the Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SIR-C/X-SAR) on the Shuttle Endeavor. Specific examples of the applications of these data to various scientific disciplines will be discussed. The second section of the paper describes the recent progress in the development of an interferometric SAR system for high-resolution digital topography mapping. Examples of measurements from this technique over areas with earthquakes will be shown. The final section of the paper addresses development of meteorological radars for rain and cloud measurements. The design of an airborne rain mapping radar that was developed to support the Tropical Rain Measuring Mission is summarized. The technical design challenges for this high-frequency radar system will be described.

radar↗

(abstract) SIR-C/X-SAR: A Multifaceted Radar

The Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SAR-C/X-SAR) was a joint US/German/Italian project, with flights aboard the shuttle Endeavor in April and October 1994. SIR-C/X-SAR is the first spaceborne multifrequency, multipolarization radar. The SIR-C and the X-SAR were designed to operate in conjunction with each other, collecting data over common sites. Scientists around the world are using the data in conjunction with ground measurements to conduct experiments relating to Earth's ecology, geology, hydrology, and oceanography. In addition, the data are the most comprehensive set yet available for engineering characterization of spaceborne SAR capabilities relative to various radar phenomenology and methodology. Preliminary results show changes between missions in vegetation, ice, snow, flooding, and volcano activity.

imaging↗

(abstract) The 1994 Laboratory Calibration Of TIMS

This summary describes the spatial, spectral, and radiometric calibration of TIMS performed at the JPL Thermal Infrared Calibration Facility (TIRCAL) between May and August 1994. The 1994 calibration of TIMS was the first to make use of the new EXABYTE (8mm helical-scan tape) recording system. With the new recorder, the TIMS data tapes may be read directly on any computer system that has an EXABYTE tape drive. We analyzed the calibration data sets using image processing procedures written in IDL (Research Systems, Inc., Boulder, CO 80303).

TIMS↗

(abstract) Pluto Integrated Camera-Spectrometer (PICS): a Low Mass, Low Power Instrument for Planetary Exploration

The concept we describe is an integrated instrument (a Pluto Integrated Camera-Spectrometer -- PICS) that will perform the functions of all three optical instruments required by the Pluto Fast Flyby Mission: the near-IR spectrometer, the camera, and the UV spectrometer. This integrated approach minimizes mass and power use. It also forced us early in the conceptual design to consider integrated observational sequences and integrated power management, thus ensuring compatible duty cycles (i.e., exposure times, readout rates) to meet the composite requirements for data collection, compression, and storage. Based on flight mission experience we believe that this integrated approach will result in substantial cost savings, both in reworking instrument designs during accommodation, as well as in sequence planning and integration. Finally, this integrated payload automatically yields a cohesive mission data set, optimized for correlative analysis. The presentation will provide details of the PICS instrument design and describe the fabrication and testing of the integrated SiC structure and optics at SSG Inc. Final integration and test plans for the prototype will also be described.

Pluto↗

(abstract) FASTER -- A Tool for DSN Forecasting and Scheduling

FASTER, the Forecasting And Scheduling Tool for Earth-based Resources is a suite of software tools developed at JPL to aid in the process of allocating DSN 70 and 34 meter antennas and equipment to support deep space satellites and ground based astronomy. FASTER has been designed for use by a diverse user community, including mid-level managers, data entry and analysis teams, and project scheduling personnel. The system helps to automate many of the previously labor intensive tasks and ensure proper analysis and consistency throughout all phases of the allocation process. FASTER implements an interactive environment for both forecasting and scheduling. This paper will discuss technical aspects of the FASTER system, including forecasting and scheduling algorithms, issues related to large scale use of a scheduling and forecasting system, implications to the process in which a forecasting and scheduling system is embedded, and lessons learned and implications to similar systems.

forecasting↗

(abstract) Geology of the Venera and Vega Landing Sites

Geologic mapping of the seven Venera/Vega landing sites (radius of error = 150 km) using Magellan data has shown that the dominant type of terrain at these sites is plains. At the Venera 8 and 13 sites, where a nontholeiitic composition was measured for the surface material, the Magellan imagery shows that both these sites have unusual volcanic features associated with them, such as steep sided domes and coronalike features. At the other five sites, where no peculiar volcanic activity occurred within the landing circle, the landers measured geochemical signatures of tholeiitic basalts. This association between unusual volcanic activity and nontholeiitic composition suggests that the geochemistry measured by the landers correlates well with the morphology seen in the Magellan imagery. A strong correlation also exists between the SAR imagery and the TV panoramas taken by the Venera 9, 10, 13, and 14 landers. Based on Magellan data and the lander geochemical and TV panoramas, we have been able to suggest the most likely material in the Magellan imagery sampled by the landers.

Venera↗

(abstract) Electron Excitation of the H 2 (...) Continuum in the Vacuum Ultraviolet

Planetary exploration has pointed out the need for accurate electron impact excitation cross sections for H 2 . The quantum yield in the threshold energy region between vacuum ultraviolet (VUV) emission production by the band systems of the singlet and triplet states and dissociative production of fast H(1s) atoms by the triplet states is essential for energy budget modeling in planetary atmospheres and astronomy.

electron↗

(abstract) The Impactor Flux in the Pluto-Charon System

The impactor flux on Pluto and Charon consists of long-period comets from the Oort cloud passing through the region, and intermediate-period comets evolving inward to (or outward from) short-period orbits. The source of the intermediate-period comets is likely an extended disk of remnant planetesimals beyond the orbit of Neptune, commonly referred to as the Kuiper belt, though the Oort cloud may be an additional source of some short-period comets. The Pluto-Charon system actually circulates within the Kuiper belt, and with an aphelion of 49.3 AU, moves through a region where remnant planetesimal orbits would likely be stable over the age of the solar system. The recent discovery of two objects at Kuiper belt distances, 1992 QB 1 and 1993 FW, and the fact that the orbit determined for 1992 QB 1 is likely of low eccentricity and low inclination, have provided strong observational evidence for the Kuiper belt. Weisman et al (1989) showed that, for the expected number of objects in the Kuiper belt necessary to provide the short-period comet flux, cometary cratering on Pluto and Charon is dominated by Kuiper belt comets. We will provide updated estimates of the numbers, based on an improved understanding of Oort cloud and Kuiper belt dynamics since 1989, and on improved estimates for the radii and masses for Pluto and Charon. Because Pluto and Charon actually penetrate the stable region of the Kuiper belt beyond 40 AU, expected cratering rates for the pair are substantially higher than for Triton, which is located at the inner edge of the Kuiper belt. However, the Pluto-Charon system is tidally evolved and this may have led to resurfacing events at various times in its history. Thus, detailed predictions of the integrated crater density or comparisons with Triton are not very meaningful without a knowledge of that history. Differences in the suspected compositions of Pluto and Charon may also lead to different surface rheologies and thus, different retention times for cratered surfaces.

Pluto↗

(abstract) Overview of NASA's Adaptive Structures Program

NASA's research program in Adaptive Structures was initiated seven years ago to provide the technology required for large (20-50 meters in dimension) precision (submicron) structures for observations from space. The current approach of designing thermally stable passive structures cannot meet the requirements and moreover the systems cannot be validated by ground tests. Adaptive Structures provides the capability to adjust the quasistatic dimensions of the structures, preload joints, add active damping, and provide the actuation forces necessary to attenuate the undesired dynamic motions. The technology is applicable to space platforms with various pointing instruments as well as for microspacecraft. This technology has been incorporated as part of a small Active Fold Mirror on the Wide Field Planetary Camera to be flown within the year to correct the optical errors in the Hubble Telescope. Highlights of NASA's Adaptive Structures research and applications will be presented along with future technology and research requirements for both small inexpensive spacecraft and large precision systems.

adaptive↗