Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

High pressure X-ray diffraction studies of Bi{sub 2-x}Sb{sub x}Te{sub 3} (x = 0,1,2)

Recently, pressure tuning of the thermoelectric figure of merit has been reported for several materials Bi{sub 2}Te{sub 3} based thermoelectric materials. In order to investigate the bulk properties of Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3}, and their solid solution in detail, we have performed structural studies up to 20 GPa. Our diffraction results show that all three compounds transform from the ambient pressure structure to a high pressure phase between 7 and 10 GPa. In addition, these diffraction results have been converted to Vinet and Holzapfel equations of state to test the claim of electronic topological transitions in these structures.

36 MATERIALS SCIENCE↗

Amorphization dynamics of Ge{sub 2}Sb{sub 2}Te{sub 5} films upon nano- and femtosecond laser pulse irradiation

Phase transformations of crystalline Ge{sub 2}Sb{sub 2}Te{sub 5} films upon pulsed laser irradiation have been studied using in situ reflectivity measurements with temporal resolution. Two different configurations allowed point probing with nanosecond temporal resolution and imaging with subpicosecond temporal and micrometer spatial resolution. The role of the pulse duration and laser fluence on the dynamics of the phase change and the degree of amorphization is discussed. Several advantageous features of femtosecond compared to nanosecond laser-induced amorphization are identified. Moreover, a high-resolution study of the amorphization dynamics reveals the onset of amorphization at moderate fluences to occur within {approx}100 ps after arrival of the laser pulse. At high fluences, amorphization occurs after {approx}430 ps and the molten phase is characterized by an anomalously low reflectivity value, indicative of a state of extreme supercooling.

36 MATERIALS SCIENCE↗

High quality InAsSb grown on InP substrates using AlSb/AlAsSb buffer layers

High quality InAsSb grown on semi-insulating InP substrates by molecular beam epitaxy was achieved using AlSb/AlAsSb structure as the buffer layer. A 1000 A InAsSb layer grown on top of 1 {mu}m AlSb/AlAsSb buffer layer showed a room temperature electron mobility of {approx}12 000 cm{sup 2}/V s. High structural quality and low misfit defect density were also demonstrated in the InAsSb layer. This novel AlSb/AlAsSb buffer layer structure with the AlAsSb layer lattice matched to InP substrates could enhance the performance of optoelectronic devices utilizing 6.1 A family of compound semiconductor alloys.

36 MATERIALS SCIENCE↗

Ultrafast crystallization and thermal stability of In-Ge doped eutectic Sb{sub 70}Te{sub 30} phase change material

Effect of In and Ge doping in the form of In{sub 2}Ge{sub 8}Sb{sub 85}Te{sub 5} on optical and thermal properties of eutectic Sb{sub 70}Te{sub 30} alloys was investigated. Crystalline structure of In{sub 2}Ge{sub 8}Sb{sub 85}Te{sub 5} phase change material consists of a mixture of phases. Thermal analysis shows higher crystallization temperature and activation energy for crystallization. Isothermal reflectivity-time measurement shows a growth-dominated crystallization mechanism. Ultrafast crystallization speed of 30 ns is realized upon irradiation by blue laser beam. The use of ultrafast and thermally stable In{sub 2}Ge{sub 8}Sb{sub 85}Te{sub 5} phase change material as mask layer in aperture-type super-resolution near-field phase change disk is realized to increase the carrier-to-noise ratio and thermal stability.

36 MATERIALS SCIENCE↗

LOW TEMPERATURE THERMOELECTRIC PROPERTIES OF Bi-Sb ALLOYS WITH PARTIAL SUBSTITUTION OF Ag OR Zn FOR Sb

Bi-Sb-Ag and Bi-Sb-Zn alloys with the general formula of Bi{sub 85}Sb{sub 15-x}Ag{sub x}(x = 0, 1, 3, 5, 7) and Bi{sub 85}Sb{sub 15-x}Zn{sub x}(x = 1, 3, 5, 7), respectively, were prepared by mechanical alloying and subsequent pressure-less sintering. The phase structures of the samples were investigated by X-ray diffraction. Thermoelectric properties were investigated by measuring electrical conductivity, Seebeck coefficient and thermal conductivity in the temperature range of 80-300 K. The results show that the figure-of-merit of sample Bi{sub 85}Sb{sub 14}Ag{sub 1} reach a maximum value of 2.16x10{sup -3} K{sup -1} at 219 K, which is twice as large as that of the reference sample Bi{sub 85}Sb{sub 15}. The value of 1.58x10{sup -3} K{sup -1} for figure-of-merit was obtained in the sample Bi{sub 85}Sb{sub 14}Zn{sub 1} at 155 K, which is about 78 percent larger than that of the reference sample Bi{sub 85}Sb{sub 15} at the same temperature. The maximum figure-of-merit value is obviously shifted towards lower temperature region.

36 MATERIALS SCIENCE↗

Ultraviolet emission from Sb-doped p-type ZnO based heterojunction light-emitting diodes

Heterojunction light emitting diodes (LEDs) were fabricated by making Au/Ni top Ohmic contacts on Sb-doped p-type ZnO film with low specific contact resistivity and Al/Ti back Ohmic contacts on n-type Si substrate. Near-band edge and deep-level emissions were observed from the LED devices at both low temperatures and room temperature, which is due to band-to-band and band-to-deep level radiative recombinations in ZnO, respectively. The electroluminescence emissions precisely match those of photoluminescence spectra from Sb-doped p-type ZnO, indicating that the ZnO layer acts as the active region for the radiative recombinations of electrons and holes in the diode operation.

36 MATERIALS SCIENCE↗

Preparation and thermoelectric properties of high-performance Sb additional Yb{sub 0.2}Co{sub 4}Sb{sub 12+y} bulk materials with nanostructure

High-performance Sb excess Yb{sub 0.2}Co{sub 4}Sb{sub 12+y} (y=0,0.3,0.6,1.0) bulk materials with nanostructure have been prepared by combining melt spinning technique with spark plasma sintering. Average grain size of the bulk samples is about 150 nm when y=0 and 0.3, and the grain size increases with the increase of y. Moderately superfluous Sb may improve the electrical transport properties effectively and the thermal conductivity of the bulk samples decreases markedly due to the nanostructure. The thermoelectric performance of the samples is significantly improved, and the maximum figure of the merit reaches 1.26 for the Yb{sub 0.2}Co{sub 4}Sb{sub 12.3} compound at 800 K.

36 MATERIALS SCIENCE↗

Radiation-modified structure of Ge{sub 25}Sb{sub 15}S{sub 60} and Ge{sub 35}Sb{sub 5}S{sub 60} glasses

Atomic structures of Ge{sub 25}Sb{sub 15}S{sub 60} and Ge{sub 35}Sb{sub 5}S{sub 60} glasses are investigated in the {gamma}-irradiated and annealed after {gamma}-irradiation states by means of high-energy synchrotron x-ray diffraction technique. The first sharp diffraction peak (FSDP) is detected at around 1.1 A{sup -1} in the structure factors of both alloys studied. The FSDP position is found to be stable for radiation/annealing treatment of the samples, while the FSDP intensity shows some changes between {gamma}-irradiated and annealed states. The peaks in the pair distribution functions observed between 2 and 4 A are related to the Ge-S, Ge-Sb, and Sb-Sb first neighbor correlations and Ge-Ge second neighbor correlations in the edge-shared GeS{sub 4/2} tetrahedra, and S-S and/or Ge-Ge second neighbor correlations in the corner-shared GeS{sub 4/2} tetrahedra. Three mechanisms of the radiation-/annealing-induced changes are discussed in the framework of coordination topological defect formation and bond-free solid angle concepts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion irradiation-induced local structural changes in amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin film

The crystallization kinetics of as-deposited and ion implanted amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films has been measured by time resolved reflectivity. An enhancement of the crystallization process occurred in the implanted samples. Raman scattering analysis was used to correlate the stability of the amorphous phase to its structure. The variation of the Raman signal after ion irradiation is consistent with a reduction in Ge-Te tetrahedral bonds, characteristic of the Ge coordination in amorphous Ge{sub 2}Sb{sub 2}Te{sub 5}.

36 MATERIALS SCIENCE↗

Effect of indium on phase-change characteristics and local chemical states of In-Ge-Sb-Te alloys

We introduce single-phase In-Ge-Sb-Te (IGST) quaternary thin film (fcc structure when crystallized) deposited by cosputtering from Ge{sub 2}Sb{sub 2}Te{sub 5}(GST) and In{sub 3}Sb{sub 1}Te{sub 2} targets. This film, compared with the GST ternary system, provides a significant increase of amorphous-to-crystalline transformation temperature. High-resolution x-ray photoelectron spectroscopy (HRXPS) revealed that, with increasing In amounts, the Sb 4d and Ge 3d core peaks shift toward lower binding energies (BEs), with negligible changes in spectral linewidths, whereas the In 4d and Te 4d core peaks show insignificant changes in BEs. HRXPS interpretation suggests that the Na site in IGST can be occupied by Te, Sb, In, and vacancy, whereas in GST it is occupied only by Te.

36 MATERIALS SCIENCE↗

X-ray photoelectron spectroscopic study of Ge{sub 2}Sb{sub 2}Te{sub 5} etched by fluorocarbon inductively coupled plasmas

X-ray photoelectron spectroscopy was used to determine the level of surface fluorination damage of Ge{sub 2}Sb{sub 2}Te{sub 5} (GST) etched by fluorocarbon gases at different F/C ratios. When blank GST was etched, the gas with a higher F/C ratio produced a thinner C-F polymer on the etched surface but fluorinated Ge, Sb, and Te compounds were observed in the remaining GST. When the sidewall of the etched GST features was investigated, a thicker fluorinated layer was observed on the GST sidewall etched by the higher F/C ratio gas, indicating more fluorination due to the difficulty in preventing F diffusion into the GST through the thinner C-F layer.

36 MATERIALS SCIENCE↗

Sulphide Ga{sub x}Ge{sub 25-x}Sb{sub 10}S{sub 65(x=0,5)} sputtered films: Fabrication and optical characterizations of planar and rib optical waveguides

We report the fabrication and the physical and optical characterizations of sulphide Ga{sub x}Ge{sub 25-x}Sb{sub 10}S{sub 65(x=0,5)} rib waveguides. High quality films fabricated on SiO{sub 2}/Si wafer substrates were obtained using the sputtering magnetron rf deposition method. The slab waveguides obtained without annealing present propagation losses of about 0.6 dB/cm at 1550 nm. These optical losses are not important for implementation in optical devices based on silicon-on-insulator or polymer, for instance, atomic force microscopy measurements revealed low interface roughness between the different media (substrate/film and film/air). Reactive ion etching was used to pattern rib waveguides between 2 and 300 {mu}m wide. The parameters were optimized to obtain a dry etching process that had low surface roughness, vertical sidewalls, etch depth of more than 1 {mu}m, and reasonable etching rate. This technique was used to fabricate Y optical junctions for optical interconnections on chalcogenide amorphous films. Their optical transmission was demonstrated by optical near field of guided modes and optical losses were measured and discussed.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth of InAsN:Sb for midinfrared Optoelectronics

We report molecular beam epitaxial growth and characterization of dilute nitride InAsN:Sb. X-ray diffraction, energy dispersive x-ray spectrometry, and electron probe microanalysis revealed that nitrogen incorporation is significantly enhanced by introduction of Sb flux during growth, together with a dramatic improvement of the photoluminescence. These observations were attributed to the surfactant effect of Sb which suppresses the surface diffusion length of nitrogen and improves the homogeneity of the alloy. Sb incorporation is enhanced with the presence of nitrogen which was associated with the surface kinetic of growth. InAsN:Sb/InAs p-i-n light emitting diodes operating near 4.0 {mu}m were also realized.

36 MATERIALS SCIENCE↗

InSbN alloys prepared by two-step ion implantation for infrared photodetection

InSbN alloys are fabricated by two-step nitrogen ion implantation into InSb (111) wafers. X-ray photoelectron spectroscopy indicates that most of the implanted nitrogen ions substitute Sb to form In-N bonds. The percentage of the In-N bonds is found to decrease with the increase in the implanted nitrogen. Such alloys can effectively detect long wavelength infrared radiation and the absorption peak energies can be controlled by monitoring the implanted nitrogen dose. The measured peak wavelengths are consistent with the band gaps of the alloys calculated using a ten-band k{center_dot}p model.

36 MATERIALS SCIENCE↗

Thermal transport properties of nanocrystalline Bi-Sb-Te thin films prepared by sputter deposition

Grain-size dependent thermal conductivity of sputtered nanocrystalline Bi-Sb-Te thin films was measured by a 3{omega} method. By changing deposition temperature from 100 deg. C to room temperature, the mean grain size of the Bi-Sb-Te films decreased from 83 to 26 nm and the lattice thermal conductivity reduced from 0.79 to 0.45 W/mK proportionally. The effect of grain boundary on lattice thermal conductivity can be described by an effective thermal boundary resistance that was determined in the range of 0.56-1.8x10{sup -8} m{sup 2}K/W for the nanocrystalline Bi-Sb-Te thin films studied.

36 MATERIALS SCIENCE↗

Synthesis and transport property of AgSbTe{sub 2} as a promising thermoelectric compound

Polycrystalline AgSbTe{sub 2} ternary compound materials with high phase purity were fabricated using a combined process of mechanical alloying and spark plasma sintering. It was found that stoichiometric AgSbTe{sub 2} is a promising composition for low-and-mediate temperature applications, whose ZT reaches 1.59 at 673 K, benefiting from its extremely low thermal conductivity (0.30 W/mK) in addition to its low electrical resistivity (<1.1x10{sup -4} {omega} m) and large positive Seebeck coefficient (260 {mu}V/K). On the other hand, deviating from this formula would lead to unstable phase structures and higher thermal conductivity, which make the samples less attractive as thermoelectric materials or components of thermoelectric systems.

36 MATERIALS SCIENCE↗

Microstructural and optical analysis of superresolution phenomena due to Ge{sub 2}Sb{sub 2}Te{sub 5} thin films at blue light regime

Superresolution (SR) phenomena due to Ge{sub 2}Sb{sub 2}Te{sub 5} films were examined by combined analysis of the transmission electron microscopy (TEM) microstructures of the laser-irradiated films and the results from dynamic and static tests using blue lasers. A new finding was made that comprises a complementary case of the classical SR readout by Ge{sub 2}Sb{sub 2}Te{sub 5} film; an amorphous band instead of a closed aperture of melt in the crystalline background forms behind a moving laser but still produces a high SR signal. A complete carrier-to-noise-ratio curve of a SR-read-only memory employing Ge{sub 2}Sb{sub 2}Te{sub 5} may be derived from a nonlinear optical effect, specifically thermally assisted saturable absorption.

36 MATERIALS SCIENCE↗

Rapid preparation method of bulk nanostructured Yb{sub 0.3}Co{sub 4}Sb{sub 12+y} compounds and their improved thermoelectric performance

A synthetic route was introduced to speed up the preparation of high performance nanostructured Yb{sub 0.3}Co{sub 4}Sb{sub 12+y} (y=0.3 and 0.6) compounds. Compared with the samples prepared by a traditional method, the processing time is reduced from the typical 10 days to less than 40 h, the Yb filling fraction limit increases, and the resulting thermoelectric transport properties are improved significantly. As a consequence, the dimensionless figure of merit of our bulk nanostructured Yb{sub 0.3}Co{sub 4}Sb{sub 12.3} reaches 1.3 at 800 K. The enhanced thermoelectric performance coupled with the dramatically reduced processing time will be of considerable significance to the commercial-scale production of skutterudite-based thermoelectric materials.

36 MATERIALS SCIENCE↗