Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Discovering CO Adsorption and Desorption Pathways from Chemical Reaction Neural Network Modeling of Transient Kinetics Spectroscopy

Here, we demonstrate a data-driven approach to interpreting surface reactions by combining time-resolved gas pulsing infrared spectroscopy with chemical reaction neural networks (CRNNs). Using CO adsorption and desorption on Pd(111) at 460–490 K as a model system, we show how transient kinetic data can reveal detailed reaction mechanisms. Starting with a simple one-species model, we systematically evaluate increasingly complex mechanisms involving hollow and bridge site adsorption. Despite the similar goodness of fit to the same experimental absorbance data, our models predict distinct coverage dynamics for different adsorption sites. Through analysis of spectral peak stability and predicted dynamics, we identify a mechanism in which CO primarily adsorbs on bridge sites followed by rapid conversion to hollow sites as being the most physically consistent with experimental observations. This work provides a framework for extracting mechanistic insights from limited experimental data, demonstrating how machine learning can bridge the gap between transient kinetic measurements and a molecular-level understanding of surface reactions.

36 MATERIALS SCIENCE↗

Understanding the Adsorption of Rare-Earth Elements in Oligo-Grafted Mesoporous Carbon

Rare-earth elements (REEs) are 17 elements of the periodic table primarily consisting of lanthanides. In modern society, the usage of REEs is ubiquitous in almost all modern gadgets and therefore efficient recovery and separation of REEs are of high importance. Selective adsorption and chelation of REEs in solid sorbents is a unique and sustainable process for their recovery. In this work, single-stranded oligos with 100 units of thymine were grafted onto carboxylated mesoporous carbon to synthesize a sorbent with phosphorus and oxygen functionalities. Additionally, the sorbent was characterized by X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy-energy-dispersive X-ray spectroscopy. Three different REEs with varying atomic radii and densities, Lu, Dy, and La, were adsorbed onto the carbon from aqueous solutions. It was observed that the adsorbed amounts increased with the increase in the atomic radius or decrease in the atomic density. Calculation of the distribution coefficients for all the equilibrium adsorption amounts suggested that adsorption is more effective in the lower concentration region. The L 3 -edge X-ray absorption near-edge structure confirmed a 3+ oxidation state of REEs in the adsorbed phase. Extended X-ray absorption fine structure (EXAFS) confirmed the binding of REEs with oxygen functionalities in the adsorbed phase. The radial distribution functions calculated from the EXAFS data suggest a longer RE–O distance for La compared to those for Lu and Dy. The coordination numbers and Debye–Waller factors have typical values of about 8–9 atoms and 0.01–0.02 Å 2 , respectively.

36 MATERIALS SCIENCE↗

Exceptional Fluorocarbon Uptake with Mesoporous Metal-Organic Frameworks for Adsorption-Based Cooling Systems

For the first time, a series of well-reported mesoporous metal–organic frameworks (MOFs) have been tested for R134a fluorocarbon adsorption. Differences in sorption behavior were attributed to varying porosities and topologies. All mesoporous MOFs exhibited excellent, reversible R134a adsorption capacities and among them, NU-1000 provided an exceptional fluorocarbon uptake of ~170 wt% near saturation, which is among the highest values reported so far for MOFs. N2 sorption, high-resolution STEM, and micro calorimetry were used to further explore the relation between the features of NU-1000 and the exceptionally high R134a uptake capacity. Such high performance materials with the appropriate equilibrium isotherm behavior provide significant potential for adsorption cooling systems operating on pressure swing cycles. These results provide evidence that mesoporous MOFs, especially those with hierarchical structure, are promising candidates for chiller applications.

adsorption cooling, fluorocarbons, mesoporous, met↗

Impedance-Based Detection of NO 2 Using Ni-MOF-74: Influence of Competitive Gas Adsorption

Chemically robust, low-power sensors are needed for the direct electrical detection of toxic gases. Metal–organic frameworks (MOFs) offer exceptional chemical and structural tunability to meet this challenge, though further understanding is needed regarding how coadsorbed gases influence or interfere with the electrical response. To probe the influence of competitive gases on trace NO 2 detection in a simulated flue gas stream, a combined structure–property study integrating synchrotron powder diffraction and pair distribution function analyses was undertaken, to elucidate how structural changes associated with gas binding inside Ni-MOF-74 pores correlate with the electrical response from Ni-MOF-74-based sensors. Data were evaluated for 16 gas combinations of N 2 , NO 2 , SO 2 , CO 2 , and H 2 O at 50 °C. Fourier difference maps from a rigid-body Rietveld analysis showed that additional electron density localized around the Ni-MOF-74 lattice correlated with large decreases in Ni-MOF-74 film resistance of up to a factor of 6 × 10 3 , observed only when NO 2 was present. These changes in resistance were significantly amplified by the presence of competing gases, except for CO 2 . Without NO 2 , H 2 O rapidly (<120 s) produced small (1–3×) decreases in resistance, though this effect could be differentiated from the slower adsorption of NO 2 by the evaluation of the MOF’s capacitance. Furthermore, samples exposed to H 2 O displayed a significant shift in lattice parameters toward a larger lattice and more diffuse charge density in the MOF pore. Evaluating the Ni-MOF-74 impedance in real time, NO 2 adsorption was associated with two electrically distinct processes, the faster of which was inhibited by competitive adsorption of CO 2 . Together, this work points to the unique interaction of NO 2 and other specific gases (e.g., H 2 O, SO 2 ) with the MOF’s surface, leading to orders of magnitude decrease in MOF resistance and enhanced NO2 detection. Finally, understanding and leveraging these coadsorbed gases will further improve the gas detection properties of MOF materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative Simulations of Siloxane Adsorption in Metal–Organic Frameworks

We present a transferable force field (FF) for simulating the bulk properties of linear and cyclic siloxanes and the adsorption of these species in metal–organic frameworks (MOFs). Unlike previous FFs for siloxanes, our FF accurately reproduces the vapor–liquid equilibria of each species in the bulk phase. The quality of our FF combined with the Universal Force Field using standard Lorentz–Berthelot combining rules for MOF atoms was assessed in a wide range of MOFs without open metal sites, showing good agreement with dispersion-corrected density functional theory calculations. Predictions with this FF show good agreement with the limited experimental data for siloxane adsorption in MOFs that is available. As an example of using the FF to predict adsorption properties in MOFs, we present simulations examining entropy effects in binary linear and cyclic siloxane mixture coadsorption in the large-pore MOF with structure code FOTNIN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and Recovery of Polyphenolic Flavonoids Using TiO 2 -Functionalized Mesoporous Silica Nanoparticles

Exploiting specific interactions with titania (TiO 2 ) has been proposed for the separation and recovery of a broad range of biomolecules and natural products, including therapeutic polyphenolic flavonoids which are susceptible to degradation, such as quercetin. Functionalizing mesoporous silica with TiO 2 has many potential advantages over bulk and mesoporous TiO 2 as an adsorbent for natural products, including robust synthetic approaches leading to high surface area, stable separation platforms. Here, TiO 2 surface functionalized mesoporous silica nanoparticles (MSNPs) are synthesized and characterized as a function of TiO 2 content (up to 636 mg TiO2/g). The adsorption isotherms of two polyphenolic flavonoids, quercetin and rutin, were determined (0.05-10 mg/ml in ethanol), and a 100-fold increase in the adsorption capacity was observed relative to functionalized nonporous particles with similar TiO 2 surface coverage. An optimum extent of functionalization (approximately 440 mg TiO 2 /g particles) is interpreted from characterization techniques including grazing incidence x-ray scattering (GIXS), high resolution transmission electron microscopy (HRTEM) and nitrogen adsorption, which examined the interplay between the extent of TiO 2 functionalization and the accessibility of the porous structures. The recovery of flavonoids is demonstrated using ligand displacement in ethanolic citric acid solution (20% w/v), in which greater than 90% recovery can be achieved in a multistep extraction process. The radical scavenging activity (RSA) of the recovered and particle-bound quercetin as measured by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay demonstrates greater than 80% retention of antioxidant activity by both particle-bound and recovered quercetin. In conclusion, these mesoporous titanosilicate materials can serve as a synthetic platform to isolate, recover, and potentially deliver degradation-sensitive natural products to biological systems.

36 MATERIALS SCIENCE↗

Revisiting Selenium Interactions with Pyrite: From Adsorption to Coprecipitation

Interactions of selenium (Se), a trace element bio-essential at low concentrations but highly toxic at high concentrations, with the most abundant sulfide mineral in the Earth's crust, namely pyrite, was investigated over a wide range of time scales. At the nanosecond scale, selenate Se(VI)O 4 2– adsorption onto the net pyrite surface is shown by ab-initio computations to proceed via the formation of a chemical bond between an oxyanion oxygen atom and a surface Fe atom, weakening the other Se-O bonds and reducing Se atom oxidation state. At the hour-to-day scale, adsorption and coprecipitation of selenate Se(VI)O 4 2– and selenite, Se(IV)O 3 2– , were investigated through wet chemical batch experiments at various pH values at different sulfide concentrations. Selenium removal from solution is slower and weaker for selenate than for selenite. After 24h, only 10% of selenate, against 60% of selenite (up to 100% in the presence of sulfide), is removed by the pyrite surface. Independently of its original oxidation state, adsorbed Se is completely reduced to elemental trigonal selenium via adsorption, precipitation or coprecipitation, as shown by XANES spectroscopy. Here, our EXAFS results, compared to published data on Se-rich pyrite, show a Se to S substitution within the pyrite structure. The reductive coprecipitation mechanism of selenium with pyrite represents valuable new insights for improving our understanding of modern and ancient biogeochemical cycles involving Se. In addition, several industries can benefit from direct applications of our findings, such as water treatment, green technologies and sustainable mining.

Adsorption↗

Adsorption Hysteresis Under Control: Tuning Host–Guest Interactions via a Genetic Algorithm

Mesoporous adsorbent materials offer a large volumetric capacity; however, cyclic adsorption/desorption processes in these systems often suffer from hysteresis and may require a significant pressure swing to access this capacity. To mitigate hysteresis, a proposed strategy is to include nucleation sites on the walls of the mesoporous material to facilitate droplet and bubble formation, lowering the free energy barriers to the respective phase transitions. It is unclear, however, what combination of adsorbate− adsorbent interactions and spatial patterning would be beneficial for a given application, considering that improvements to some sorption properties may come at the expense of other attributes. To understand these interconnected observables, we examine two model systems, planar-slit and cylindrical pores with tunable interaction sites, using GPU-accelerated transition matrix Monte Carlo simulations. The simulations provide a free energy map of the pressure−adsorption space in a matter of minutes, which we use to track adsorption isotherm characteristics as a function of adsorbent properties. We then leverage the rapid acquisition of simulation data to construct a genetic algorithm to iteratively modify interaction sites of the slit-pore wall to minimize the hysteresis of this system without sacrificing uptake. We find that the adsorption branch of the isotherm is easily modulated via the average host−guest interaction strength, but desorption is only adjustable if there is a suitable bubble nucleation site. Within the context of a slit-pore system, we identify relative interaction strengths and patch sizes required to gain control over both branches of the hysteresis loop.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion and Adsorption of Uranyl Carbonate Species in Nanosized Mineral Fractures

Atomistic simulations were performed to study the diffusion and adsorption of Ca{sub 2}UO{sub 2}(CO{sub 3}){sub 3} and of some of its constituent species, i.e., UO{sub 2}{sup 2+}, CO{sub 3}{sup 2-}, and UO{sub 2}CO{sub 3}, in feldspar nano-sized fractures. Feldspar is important to uranium remediation efforts at the U.S. Department of Energy Hanford site as it has been found in recent studies to host contaminants within its intragrain fractures. In addition, uranyl carbonate species are known to dominate U(VI) speciation in conditions relevant to the Hanford site. Molecular dynamics (MD) simulations showed that the presence of the feldspar surface diminishes the diffusion coefficients of all the species considered in this work and that the diffusion coefficients do not reach their bulk aqueous solution values in the center of a 2.5 nm fracture. Moreover, the MD simulations showed that the rate of decrease in the diffusion coefficients with decreasing distance from the surface is greater for larger adsorbing species. Free energy profiles of the same species adsorbing on the feldspar surface revealed a large exothermic free energy of adsorption for UO{sub 2}{sup 2+} and UO{sub 2}CO{sub 3}, which are able to adsorb to the surface with their uranium atom directly bonded to a surface hydroxyl oxygen, whereas adsorption of CO{sub 3}{sup 2-} and Ca{sub 2}UO{sub 2}(CO{sub 3}){sub 3}, which attach to the surface via hydrogen bonding from a surface hydroxyl group to a carbonate oxygen, was calculated to be either only slightly exothermic or endothermic.

08 HYDROGEN↗

Modeling of mercury oxidation and adsorption by cupric chloride-impregnated carbon sorbents

Cupric chloride-impregnated activated carbon sorbents (CuCl{sub 2}-ACs) showed good performance in Hg{sup 0} oxidation and adsorption in previously published entrained-flow test results. In addition, our previous studies indicated that Hg{sup 0} is oxidized by CuCl{sub 2}-ACs and the resultant oxidized mercury is readsorbed onto the sorbents. This study conducted mathematical modeling to interpret. these previous results and better understand the Hg{sup 0} oxidation and adsorption mechanism of CuCl{sub 2}-ACs. As a result the mathematical modeling results confirmed that Hg{sup 0} oxidation by CuCl{sub 2}-ACs is determined by the injection level of CuCl{sub 2} impregnated onto the sorbents. An increase in Cu Cl{sub 2} loading in CuCl{sub 2}-ACs was found to increase Hg{sup 0} oxidation but very slightly increased Hg adsorption because an increase in Cu Cl{sub 2} loading decreased the active CuCl{sub 2}-free carbon sites available for the readsorption of resultant oxidized mercury on the surfaces and inside the pores.

01 COAL, LIGNITE, AND PEAT↗

Silver Adsorption on Calcium Niobate(001) Nanosheets: Calorimetric Energies That Explain Sinter-Resistant Support

Metal nanoparticles deposited on oxide supports are essential to many technologies, including catalysts, fuel cells and electronics. Therefore, understanding the chemical bonding strength between metal nanoparticles and oxide surfaces is of great interest. The adsorption energetics, adhesion energy and adsorbate structure of Ag on dehydrated HCa 2 Nb 3 O 10 (001) nanosheets at 300 K have been studied using metal adsorption calorimetry and surface spectroscopies. These dehydrated (“dh”) calcium niobate nanosheets “(dh-HCa 2 Nb 3 O 10 (001))” have stoichiometry Ca 4 Nb 6 O 19 . They impart unusual stability to metal nanoparticles when used as catalyst supports and are easy-to-prepare by Langmuir-Blodgett (LB) techniques, highly ordered, and essentially single-crystal surfaces of mixed oxides with a huge ratio of terrace to edge sites. Below monolayer coverage, Ag grows on dh-HCa 2 Nb 3 O 10 (001) as 2D islands of thickness ~2 layers. The differential heat of Ag adsorption is initially ~303 kJ/mol, increasing slowly to ~338 kJ/mol by 0.8 ML. At higher coverages, Ag atoms mainly add on top of these 2D islands, growing 3D nanoparticles of increasing thickness, as the heat decreases asymptotically towards silver’s heat of sublimation (285 kJ/mol). The adhesion energy of Ag(s) to this Ca niobate surface is estimated to be 4.33 J/m 2 , larger than on any oxide surface previously measured. This explains the sinter resistance reported for metal nanoparticles on this support. Electron transfer from Ag into the calcium niobate is also measured. Furthermore, these results demonstrate an easy way to do singlecrystal-type surface science studies - and especially thermochemical measurements - on the complex surfaces of mixed oxides: using LB-deposited perovskite nanosheets and ultrahigh vacuum annealing in O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cluster-Models for Uranyl(VI) Adsorption on alpha-Alumina

Aqueous complexation, adsorption and redox chemistry of actinide species at mineral surfaces have significant impact on their transport and reactive behaviour in chemically and physically heterogeneous environments. The adsorption configurations and energies of micro-solvated uranyl dication, UO2 2+, on fully hydroxylated and H-deficient a-alumina (0001)-like finite cluster models were studied. The significant size of the models provides faithful representations of features that have emerged from periodic calculations, but most importantly, they afford us a systematic study of the preferred adsorption configurations, effect of secondary solvation shells and explicit treatment of the total charge. The energetics computed from the difference between the optimized structures and the appropriate reference states, point at a preference for inner sphere type complex.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling the Interaction between Integrin-Binding Peptide (RGD) and Rutile Surface: The Effect of Na+ on Peptide Adsorption

The dynamics of a single tripeptide Arg-Gly-Asp (RGD) adsorbing onto negatively charged hydroxylated rutile (110) surface in aqueous solution was studied using molecular dynamics (MD) simulations. The results indicate that the adsorbed Na{sup +} ions play an important role in determining the binding geometry of RGD. With an initial 'horseshoe' configuration, the charged side groups (COO{sup -} and NH{sub 2}) of the peptide are able to interact with the surface through direct hydrogen bonds (H bonds) in the very early stage of adsorption. The Na{sup +} ions approach the positively charged Arg side chain, competing with the Arg side chain for adsorption to the negatively charged hydroxyl oxygen. In coordination with the structural adjustment of the peptide, the Arg residue is driven to detach from the rutile surface. In contrast, the Na+ ions in close proximity to the negatively charged Asp side chain contribute to the binding of the COO{sup -} group on the surface, helping the carboxyl oxygen not involved in COO{sup -}-surface H bonds to orientate toward the hydroxyl hydrogens. Once both carboxyl oxygens form enough H bonds with the hydroxyl hydrogens, the redundant ions move toward a more favorable adsorption site.

08 HYDROGEN↗

First-Principles Study of Electronic Structure and Hydrogen Adsorption of 3d Transition Metal Exposed Paddle Wheel Frameworks

Open-site paddle wheels, comprised of two transition metals bridged with four carboxylate ions, have been widely used for constructing metal-organic frameworks with large surface area and high binding energy sites. Using first-principles density functional theory calculations, we have investigated atomic and electronic structures of various 3d transition metal paddle wheels before and after metal exposure and their hydrogen adsorption properties at open metal sites. Notably, the hydrogen adsorption is impeded by covalent metal-metal bonds in early transition metal paddle wheels from Sc to Cr and by the strong ferromagnetic coupling of diatomic Mn and Fe in the paddle wheel configurations. A significantly enhanced H{sub 2} adsorption is predicted in the nonmagnetic Co{sub 2} and Zn{sub 2} paddle wheel with the binding energy of {approx}0.2 eV per H{sub 2}. We also propose the use of two-dimensional Co{sub 2} and Zn{sub 2} paddle wheel frameworks that could have strongly adsorbed dihydrogen up to 1.35 wt % for noncryogenic hydrogen storage applications.

08 HYDROGEN↗

Experimental and Modeling Study of Methane Adsorption onto Partially Saturated Shales

Shale gas equilibrates through gas-liquid-solid interactions in reservoirs, but the role of moisture is rarely investigated. To determine how adsorbed water influences methane behavior, three carboniferous shale samples from the Qaidam Basin, China, were humidified at five levels up to a relative humidity of 89%, and their methane capacities at pressures up to 12 MPa were studied. The experimental results indicate that two water-related mechanisms, “water blocking for methane transport” and “surface competition for gas-solid interaction,” are primarily responsible for the methane capacity variations. A compositional comparison suggests that a high abundance of clay minerals plays a favorable role in methane migration by retaining water in interlayer pores. Based on the experimental data, an optimized method for calculating the adsorption amount based on an approximation of density distribution is proposed. The model predicts the average thickness of the adsorption layer and the adsorbed methane density distribution on the surface at a given pressure. Here, the methane adsorption layer “thins” in a stepped pattern by up to 45% in the presence of water, with little further change observed at relative humidities greater than 75% in the studied samples.

58 GEOSCIENCES↗

Carbon dioxide (C{sup 16}O{sub 2} and C{sup 18}O{sub 2}) adsorption in zeolite Y materials: effect of cation, adsorbed water and particle size

In this study, CO{sub 2} adsorption in the presence and absence of co-adsorbed H{sub 2}O was investigated in zeolite Y. Several different zeolite Y materials were investigated including commercial NaY, commercial NaY ion-exchanged with Ba{sup 2+} and nanocrystalline NaY; herein referred to as NaY, BaY and nano-NaY. Following heating of these zeolites to 573 K and cooling to room temperature, CO{sub 2} was adsorbed as a function of pressure. FTIR spectra show that a majority of CO{sub 2} adsorbs in the pores of these three zeolites (NaY, BaY and nano-NaY) in a linear complex with the exchangeable cation, as indicated by the intense absorption band near 2350 cm{sup -1}, assigned to the 3 asymmetric stretch of adsorbed CO{sub 2}. Most interestingly is the formation of carbonate and bicarbonate on the external surface of nano-NaY zeolites as indicated by the presence of several broad absorption bands in the 1200-1800 cm{sup -1} region, suggesting unique sites for CO{sub 2} adsorption on the surface of the nanomaterial. For the other two zeolite materials investigated, bicarbonate formation is only evident in BaY zeolite in the presence of co-adsorbed water. Adsorption of {sup 18}O-labeled carbon dioxide and theoretical quantum chemical calculations confirm these assignments and conclusions. 28 refs., 9 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Development of Radioactive Ion Beam Purification by Selective Adsorption at the HRIBF

In the past decades many techniques have been developed to reduce isobaric contaminations in ISOL (Isotope Separation On-Line) beams. Another promising method to achieve improved selectivity is employing surface effects in the transfer line between target container and ion source. Thus adsorption materials with suitable atomic structure and polarity can lead to a high chemical selectivity. The principle of selective adsorption has already been employed successfully in the past. Quartz transfer lines are applied on-line at ISOLDE and have been shown to reduce Rb contaminations by 5 orders of magnitude. Since quartz is the only compound that has been tested yet we plan to conduct a broad on-line study of the adsorption behavior of various elements on a range of materials. For testing at the On-Line Test Facility at the Holifield Radioactive Ion Beam Facility (HRIBF) a special target-ion source unit with a variable-temperature transfer line has been constructed in collaboration with the ISOLDE technical group. Based on the design of the ISOLDE prototype unit it was modified to match the unique capabilities of the OLTF. Preliminary results of on-line tests are presented.

43 PARTICLE ACCELERATORS↗

Ammonia adsorption on iron phthalocyanine on Au(111): Influence on adsorbate-substrate coupling and molecular spin

The adsorption of ammonia on Au(111)-supported monolayers of iron phthalocyanine has been investigated by x-ray photoelectron spectroscopy, x-ray absorption spectroscopy, and density functional theory calculations. The ammonia-induced changes of the x-ray photoemission lines show that a dative bond is formed between ammonia and the iron center of the phthalocyanine molecules, and that the local spin on the iron atom is quenched. This is confirmed by density functional theory, which also shows that the bond between the iron center of the metalorganic complex and the Au(111) substrate is weakened upon adsorption of ammonia. The experimental results further show that additional adsorption sites exist for ammonia on the iron phthalocyanine monolayer.

36 MATERIALS SCIENCE↗