Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waveguide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Waveguide Modulator for Interference Tolerant Functional Near Infrared Spectrometer (fNIRS)

Many crew-related errors in aviation and astronautics are caused by hazardous cognitive states including overstress, disengagement, high fatigue and ineffective crew coordination. Safety can be improved by monitoring and predicting these cognitive states in a non-intrusive manner and designing mitigation strategies. Measuring hemoglobin concentration changes in the brain with functional Near Infrared Spectroscopy is a promising technique for monitoring cognitive state and optimizing human performance during both space and aviation operations. A compact, wearable fNIRS system would provide an innovative early warning system during long duration missions to detect and prevent vigilance decrements in pilots and astronauts. This effort focused on developing a waveguide modulator for use in a fNIRS system.

spectroscopy↗

InP-Based Ridge Waveguide Lasers for Wavelength Division Multiplexing Applications

Wavelength division multiplexed (WDM) systems place stringent requirements on the absolute wavelength and wavelength spacing of the elements in laser arrays. Ridge waveguides (RW) show excellent potential for practical implementation due to their simple fabrication with relaxed fabrication tolerances, high reliability and good performancce. An analysis of the fabrication tolerances for RW and buried heterostructure (BH) devices is performed, showing the advantages offered by the ridge design.

wavelength↗

A Novel Noncontacting Waveguide Backshort for Submillimeter Wave Frequencies

A novel noncontacting waveguide backshort has been developed which provides excellent performance. It consists of a metallic bar with rectangular or circular holes. It has the advantage of being mechanically rugged and readily fabricated using a variety of methods for frequencies up to the high submillimeter wave range.

waveguide↗

Design Techniques for Beam Waveguide Systems

Various design techniques used for beam waveguide (BWG) feed systems are characterized. These include the use of gaussian beam, geometrical optics, and physical optics systems. Also introduced is a new technique based upon a conjugate phase matching focal plane technique. Advantages, disadvantages, and range of applicability of each technique is given, In addition, comparisons of computed and measured results from each type of design are presented.

beam↗

A Novel Design Technique for Beam-Waveguide Antennas

The new 34-m beam-waveguide (BWG) antenna at Goldstone has a beam magnifier ellipse below ground level that transforms a 22-dB gain feedhorn into a high-gain 29-dB gain pattern for input to a standard four-mirror BWG system. It was initially designed for the X- an Ka-bands, and has a loss of less than 0.2 dB.

antenna↗

A Novel Design Technique for Beam-Waveguide Antennas

Paper covers the poor low-frequency performance of geometrically designed beam-waveguide antennas,and a novel design technique for solving this poor performance. A unique application was made of the conjugate phase-matching techniques to obtain the desired solution.

beam-waveguide↗

Update on multipactoring in coaxial waveguides using CST Particle Studio

CST Particle Studio combines electromagnetic field simulation, multi-particle tracking, adequate post-processing and advanced probabilistic emission model, which is the most important new capability in multipactor simulation. The emission model includes in simulation the stochastic properties of emission and adds primary electron elastic and inelastic reflection from the surfaces. The simulation of multipactor in coaxial waveguides have been performed to study the effects of the innovations on the multipactor threshold and the range over which multipactor can occur. The results compared with available previous experiments and simulations as well as the technique of MP simulation with CST PS are presented and discussed.

43 PARTICLE ACCELERATORS↗

Stochastic features of multipactor in coaxial waveguides for travelling and standing waves

CST Particle Studio combines electromagnetic field simulation, multi-particle tracking, adequate post-processing and advanced probabilistic emission model, which is the most important new capability in multipactor simulation. The emission model includes in simulation the stochastic properties of emission and adds primary electron elastic and inelastic reflection from the surfaces. The simulation of multipactor in coaxial waveguides have been performed to study the effects of the innovations on the multipactor threshold and the range over which multipactor can occur. The results compared with available previous experiments and simulations as well as the technique of MP simulation with CST PS are presented and discussed.

43 PARTICLE ACCELERATORS↗

Investigation of Beam-RF Interactions in Twisted Waveguide Accelerating Structures Using Beam Tracking Codes

Investigations of the RF properties of certain twisted waveguide structures show that they support favorable accelerating fields. This makes them potential candidates for accelerating cavities. Using the particle tracking code, ORBIT, We examine the beam - RF interaction in the twisted cavity structures to understand their beam transport and acceleration properties. The results will show the distinctive properties of these new structures for particle transport and acceleration, which have not been previously analyzed.

43 PARTICLE ACCELERATORS↗

Applications of Twisted Hollow Waveguides as Accelerating Structures

A new class of accelerating structures employing a uniformly twisted waveguide is considered. Such a twisted helical structure can be designed to have a specified longitudinal cross section. The design of twisted accelerating structures is discussed with regard to particle velocity and strength of the accelerating field. It is shown how to choose a cross section and twist rate in order to produce a slow wave with a given velocity. With two representative structures, obtained wave velocities range from the speed of light, , down to 61% the speed of light, while values of over 1,000 Ohms/m have been achieved. A novel two dimensional finite difference based solver is employed to analyze the twisted structures considered. Two twisted cavity prototypes are fabricated and measured, and good agreement is obtained between measured and predicted dispersion curves.

99 GENERAL AND MISCELLANEOUS↗

Crystal Growth and Characterization of Epitaxial Layers of Laser and Nonlinear Optical Materials for Thin-Disk and Waveguide laser applications

This paper summarizes the main results we obtained in our laboratories in relation with crystalline layers obtained by liquid phase epitaxial growth of lanthanide doped KLu(WO{sub 4}){sub 2} and Nb:RbTiOPO{sub 4} grown on KLu(WO{sub 4}){sub 2} and RbTiOPO{sub 4} substrates, respectively. Macroscopic defect free epitaxial layers were grown and characterized in terms of their compositional homogeneity, structural stress in the layer/substrate interface and laser and waveguiding performances.

36 MATERIALS SCIENCE↗

Nd-doped YVO{sub 4} waveguide films prepared by pulsed laser deposition

Nd:YVO{sub 4} thin films have been grown on silica glass substrates by using pulsed laser deposition technique. X-ray diffraction results show that the as-deposited Nd:YVO{sub 4} film is basically oriented polycrystalline and strong (200) peak was revealed. X-ray photoelectron spectroscopy measurements show that valence state of elements of prepared films is consistent with that of bulk target material. Prism coupling technique measurement shows that both TE and TM mode reveal sharp drops at some angular positions, indicating favorable light confinements within the Nd:YVO{sub 4} waveguide layer. The surface morphology of the deposited Nd:YVO{sub 4} films was also observed by using atomic force microscopy.

36 MATERIALS SCIENCE↗

7.8GHz High power generation and extraction with a dielectric-loaded waveguide.

In this paper, we present updated results on power extraction testing of a 7.8 GHz dielectric loaded waveguide power extractor using both high charge single bunches and bunch trains. We have generated a 1.7 ns radio frequency (rf) pulse with 30 MW of power with a single 66 nC electron bunch. Then we have generated a pulse train of electron beam for rf generation of 10 ns and 22 ns rf pulses.

36 MATERIALS SCIENCE↗

On infrasound generated by wind farms and its propagation in low-altitude tropospheric waveguides

Infrasound from a 60-turbine wind farm was found to propagate to distances up to 90 km under nighttime atmospheric conditions. Four infrasound sensor arrays were deployed in central New Mexico in February 2014; three of these arrays captured infrasound from a large wind farm. The arrays were in a linear configuration oriented southeast with 13, 54, 90, and 126 km radial distances and azimuths of 166°, 119°, 113°, and 111° from the 60 1.6 MW turbine Red Mesa Wind Farm, Laguna Pueblo, New Mexico, USA. Peaks at a fundamental frequency slightly below 0.9 Hz and its harmonics characterize the spectrum of the detected infrasound. The generation of this signal is linked to the interaction of the blades, flow gradients, and the supporting tower. The production of wind-farm sound, its propagation, and detection at long distances can be related to the characteristics of the atmospheric boundary layer. First, under stable conditions, mostly occurring at night, winds are highly stratified, which enhances the production of thickness sound and the modulation of other higher-frequency wind turbine sounds. Second, nocturnal atmospheric conditions can create low-altitude waveguides (with altitudes on the order of hundreds of meters) allowing long-distance propagation. Third, night and early morning hours are characterized by reduced background atmospheric noise that enhances signal detectability. This paper describes the characteristics of the infrasound from a quasi-continuous source with the potential for long-range propagation that could be used to monitor the lower part of the atmospheric boundary layer.

17 WIND ENERGY↗

Tailorable Optical Response of Au-LiNbO 3 Hybrid Metamaterial Thin Films for Optical Waveguide Applications

Photonic integrated circuits require various optical materials with versatile optical properties and easy on–chip device integration. To address such needs, a well–designed nanoscale metal–oxide metamaterial, that is, plasmonic Au nanoparticles embedded in nonlinear LiNbO 3 (LNO) matrix, is demonstrated with tailorable optical response. Specifically, epitaxial and single–domain LNO thin films with tailored Au nanoparticle morphologies (i.e., various nanoparticle sizes and densities), are grown by a pulsed laser deposition method. The optical measurement presents obvious surface plasmon resonance and dramatically varied complex dielectric function because of the embedded Au nanoparticles, and its response can be well tailored by varying the size and density of Au nanoparticles. An optical waveguide structure based on the thin film stacks of a–Si on SiO 2 /Au–LNO is fabricated and exhibits low optical dispersion with an optimized evanescent field staying in the LNO–Au active layer. Furthermore, the hybrid Au–LNO metamaterial thin films provide a novel platform for tunable optical materials and their future on–chip integrations in photonic–based integrated circuits.

36 MATERIALS SCIENCE↗

Extracting interface locations in multilayer polymer waveguide films using scanning angle Raman spectroscopy

There is an increasing demand for nondestructive in situ techniques that measure chemical content, total thickness, and interface locations for multilayer polymer films, and SA Raman spectroscopy in combination with appropriate data models can provide this information. A scanning angle (SA) Raman spectroscopy method was developed to measure the chemical composition of multilayer polymer waveguide films and to extract the location of buried interfaces between polymer layers with 7–80-nm axial spatial resolution. The SA Raman method measures Raman spectra as the incident angle of light upon a prism-coupled thin film is scanned. Six multilayer films consisting of poly(methyl methacrylate)/polystyrene or poly(methyl methacrylate)/polystyrene/poly(methyl methacrylate) were prepared with total thicknesses ranging from 330-1260 nm. The interface locations were varied by altering the individual layer thicknesses between 140-680 nm. The Raman amplitude ratio of the 1605 cm -1 peak for PS and 812 cm -1 peak for PMMA was used in calculations of the electric field intensity within the polymer layers to model the SA Raman data and extract the total thickness and interface locations. There is an average 8% and 7% difference in the measured thickness between the SA Raman and profilometry measurements for bilayer and trilayer films, respectively.

36 MATERIALS SCIENCE↗

Structural, optical and waveguiding properties improvement of SiO{sub 2}/TiO{sub 2} Bragg reflectors processed by the sol–gel method under the effect of Ni-doped TiO{sub 2} and annealing duration

Highlights: • The formation of anatase phase only, whatever are Ni content and annealing duration. • Transmission and PL spectra redshifted with Ni content and annealing duration. • PL lowering with Ni content is due to the recombination rate of electron–hole reduction. • Annealing duration increases the recombination rate and then the PL intensity rises. • Increasing Ni content improves waveguiding properties and then two TE modes appear. - Abstract: We investigated the nickel doped TiO{sub 2} layer and annealing duration effects on SiO{sub 2}/TiO{sub 2} Bragg reflectors. The films crystallize in pure anatase phase whatever is the Ni content and the annealing duration. In UV–vis-NIR analyses, variations of width, position and transmission coefficient of the stop-band were observed. The PL spectra red-shifted when the Ni content and annealing duration increased. As the annealing duration increases, an additional sharp emission peak appears around 867 nm, indicating a reduced number of defects. As Ni content increased, the M-lines spectroscopy shows two transverse electric polarization guided modes TE{sub 0} and TE{sub 1}, which indicates a decreased refractive index and an increased film thickness.

36 MATERIALS SCIENCE↗