Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “timing system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Real-time detection and data acquisition system for the left ventricular outline

A data acquisition system for the left ventricular outline which has potential for online use is described and basic principles of the contour detector are presented in detail. It is concluded that the data acquisition system for real time, online detection of left ventricular outlines has many advantages over presently used manual or semi-automatic procedures in a clinical investigative environment.

Reiber, J. H. C.↗
NASA NTRS1979

Semiclassical study of reactive scattering in a laser field - F + H2 + barred-h times omega times /1.06 microns/ system

Semiclassical calculations of collinear F+H2(nu = 0) reactive and inelastic scattering in an Nd-glass laser field of various intensities are described. The decoupling approximation developed for the Miller-George theory is used for nonadiabatic transitions between the electronic-field surfaces, and special attention is paid to the choice of a proper coordinate system for applying the decoupling approximation. An increase in the total reaction probability and population ratio of the nu = 3 over nu = 2 vibrational state of HF occurs suddenly as the field intensity increases beyond 10 TW/sq cm. It is found that in a laser field the H2 molecule can be vibrationally excited while the F atom is electronically excited.

Yuan, J.-M.↗
NASA NTRS1979

The performance of primary Cs beam clocks using quadrupole and hexapole deflection systems. Consequences for time keeping

Since 1978 the time-and-frequency standard CS1 of the Physikalisch-Technische Bundesanstalt (PTB) has operated continuously as a 'primary clock'. Its uncertainty (7.1 to the negative 15th power) is considerably smaller than that of the other existing primary standards. The CS1 is equipped with a combination of quadrupole and hexapole magnets and uses a longitudinal C-field. Consequences of utilizing primary clocks of this quality for the generation of the International Atomic Time Scale TAI are discussed.

Becker, G.↗
NASA NTRS1983

Development, design, fabrication and evaluation of a real-time video compression system

This is the final report on the work done by David Hein at the NASA-AMES Research Center. The main emphasis is on the work done on the Conditional Replenishment Emulator. The progress for May and a description of the emulator are given. Brief summaries of the work that was done in the other areas covered by the contract over the entire contract period are also provided.

Hein, D. N.↗
NASA NTRS1984

Development and operation of a real-time data acquisition system for the NASA, Langley Research Center Differential Absorption Lidar

The capabilities of the DIAL data acquisition system (DAS) for the remote measurement of atmospheric trace gas concentrations from ground and aircraft platforms were extended through the purchase and integration of other hardware and the implementation of improved software. An operational manual for the current system is presented. Hardware and peripheral device registers are outlined only as an aid in debugging any DAS problems which may arise.

Butler, C.↗
NASA NTRS1984

A substructure coupling procedure applicable to general linear time-invariant dynamic systems

A substructure synthesis procedure applicable to structural systems containing general nonconservative terms is presented. In their final form, the non-self-adjoint substructure equations of motion are cast in state vector form through the use of a variational principle. A reduced-order model for each substructure is implemented by representing the substructure as a combination of a small number of Ritz vectors. For the method presented, the substructure Ritz vectors are identified as a truncated set of substructure eigenmodes, which are typically complex, along with a set of generalized real attachment modes. The formation of the generalized attachment modes does not require any knowledge of the substructure flexible modes; hence, only the eigenmodes used explicitly as Ritz vectors need to be extracted from the substructure eigenproblem. An example problem is presented to illustrate the method.

Howsman, T. G.↗
NASA NTRS1985

Development and operation of a real-time data acquisition system for the NASA-LaRC differential absorption lidar

Computer hardware and software of the NASA multipurpose differential absorption lidar (DIAL) sysatem were improved. The NASA DIAL system is undergoing development and experimental deployment for remote measurement of atmospheric trace gas concentration from ground and aircraft platforms. A viable DIAL system was developed with the capability of remotely measuring O3 and H2O concentrations from an aircraft platform. Test flights were successfully performed on board the NASA/Goddard Flight Center Electra aircraft from 1980 to 1984. Improvements on the DIAL data acquisition system (DAS) are described.

Butler, C.↗
NASA NTRS1984

A substructure coupling procedure applicable to general linear time-invariant dynamic systems

A substructure synthesis procedure applicable to structural systems containing general nonconservative terms is presented. In their final form, the nonself-adjoint substructure equations of motion are cast in state vector form through the use of a variational principle. A reduced-order mode for each substructure is implemented by representing the substructure as a combination of a small number of Ritz vectors. For the method presented, the substructure Ritz vectors are identified as a truncated set of substructure eigenmodes, which are typically complex, along with a set of generalized real attachment modes. The formation of the generalized attachment modes does not require any knowledge of the substructure flexible modes; hence, only the eigenmodes used explicitly as Ritz vectors need to be extracted from the substructure eigenproblem. An example problem is presented to illustrate the method.

Howsman, T. G.↗
NASA NTRS1985

Space station data system analysis/architecture study. Task 2: Options development, DR-5. Volume 2: Design options

The primary objective of Task 2 is the development of an information base that will support the conduct of trade studies and provide sufficient data to make key design/programmatic decisions. This includes: (1) the establishment of option categories that are most likely to influence Space Station Data System (SSDS) definition; (2) the identification of preferred options in each category; and (3) the characterization of these options with respect to performance attributes, constraints, cost and risk. This volume contains the options development for the design category. This category comprises alternative structures, configurations and techniques that can be used to develop designs that are responsive to the SSDS requirements. The specific areas discussed are software, including data base management and distributed operating systems; system architecture, including fault tolerance and system growth/automation/autonomy and system interfaces; time management; and system security/privacy. Also discussed are space communications and local area networking.

Source record↗
NASA NTRS1986

Discrete-time Markovian-jump linear quadratic optimal control

This paper is concerned with the optimal control of discrete-time linear systems that possess randomly jumping parameters described by finite-state Markov processes. For problems having quadratic costs and perfect observations, the optimal control laws and expected costs-to-go can be precomputed from a set of coupled Riccati-like matrix difference equations. Necessary and sufficient conditions are derived for the existence of optimal constant control laws which stabilize the controlled system as the time horizon becomes infinite, with finite optimal expected cost.

Chizeck, H. J.↗
NASA NTRS1987

Real time AI expert system for robotic applications

A computer controlled multi-robot process cell to demonstrate advanced technologies for the demilitarization of obsolete chemical munitions was developed. The methods through which the vision system and other sensory inputs were used by the artificial intelligence to provide the information required to direct the robots to complete the desired task are discussed. The mechanisms that the expert system uses to solve problems (goals), the different rule data base, and the methods for adapting this control system to any device that can be controlled or programmed through a high level computer interface are discussed.

Follin, John F.↗
NASA NTRS1988

The Langley Advanced Real-Time Simulation (ARTS) system

This paper is intended as a status report on the ARTS system. It briefly describes the architecture and principal subsystems including: the CAMAC network system (hardware and software), the clocking system, the signal converters, the control consoles, and the minicomputer and microcomputer interfaces. The performance and reliability of the system exceeds expectations and component failure data over an 11-month period are presented. Planned enhancements, including the replacement of the mainframe computers, are discussed.

Crawford, Daniel J.↗
NASA NTRS1988

Theory and operation of the real-time data acquisition system for the NASA-LaRC differential absorption lidar (DIAL)

The improvement of computer hardware and software of the NASA Multipurpose Differential Absorption Lidar (DIAL) system is documented. The NASA DIAL system has undergone development and experimental deployment at NASA/Langley Res. Center for the remote measurement of atmospheric trace gas concentrations from ground and aircraft platforms. A viable DIAL system was developed capable of remotely measuring O3 and H2O concentrations from an aircraft platform. The DIAL Data Acquisition System (DAS) has undergone a number of improvements also. Due to the participation of the DIAL in the Global Tropospheric Experiment, modifications and improvements of the system were tested and used both in the lab and in air. Therefore, this is an operational manual for the DIAL DAS.

Butler, Carolyn↗