SEARCH · Engineering Papers

Results for “three body”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Experimental, water droplet impingement data on two-dimensional airfoils, axisymmetric inlet and Boeing 737-300 engine inlet

An experimental method has been developed to determine the droplet impingement characteristics on two- and three-dimensional bodies. The experimental results provide the essential droplet impingement data required to validate particle trajectory codes, used in aircraft icing analyses and engine inlet particle separator analyses. A body whose water droplet impingement characteristics are required is covered at strategic locations by thin strips of moisture absorbing (blotter) paper, and then exposed to an air stream containing a dyed-water spray cloud. Water droplet impingement data are extracted from the dyed blotter strips, by measuring the optical reflectance of the dye deposit on the strips, using an automated reflectometer. Impingement efficiency data obtained for a NACA 65(2)015 airfoil section, a supercritical airfoil section, and Being 737-300 and axisymmetric inlet models are presented in this paper.

Papadakis, M.↗

NASA NTRS1987

A new PNS code for three-dimensional chemically reacting flows

A new parabolized Navier-Stokes (PNS) code has been developed to compute the hypersonic, viscous, chemically reacting flow fields around three-dimensional bodies. The flow medium is assumed to be a multicomponent mixture of thermally perfect but calorically imperfect gases. The new PNS code solves the gasdynamic and species conservation equations in a coupled manner using a noniterative, implicit, approximately-factored, finite-difference algorithm. The space-marching method is made well-posed by special treatment of the streamwise pressure gradient term. The code has been used to compute hypersonic laminar flow of chemically reacting air over cones at angles of attack. The results of the computations are compared with the results of reacting boundary-layer computations and show excellent agreement.

Prabhu, D. K.↗

NASA NTRS1987

Spectral geometric albedos of the Galilean satellites from 0.24 to 0.34 micrometers - Observations with the International Ultraviolet Explorer

An 8-year IUE satellite spectrophotometric observation campaign's results for the Galilean satellites of Jupiter indicate low albedos for all four, consistent with the distribution of sulfurous materials escaping from the surface of Io to the surfaces of the three other bodies by means of magnetospheric processes. A previously reported UV spectral asymmetry between Europa's leading and trailing hemispheres is confirmed. The greater trailing than leading side opposition surge observed in Europa implies that the trailing side is the less compact of the two. Ganymede exhibits UV spectral asymmetry also, but only at wavelengths greater than 0.28 microns.

Nelson, Robert M.↗

NASA NTRS1988

NLF technology is ready to go

Natural laminar flow (NLF) can reduce drag on aircraft developed using modern structural design methods. Modern metal and composite construction methods can meet NLF requirements for subsonic commuter and business airframes. NLF research at NASA concentrates on expanding the practical application of NLF drag reduction technology; payoffs include progress with liquid-crystal flow visualization, NLF on three-dimensional bodies, and the effects of acoustics on laminar stability. Fuel savings from 2 to 4 percent are expected if laminar flow could be achieved over the forward 50 percent of engine nacelles on large transports depending on the configuration. It is concluded that the skill required to use NLF for drag reduction depends on understanding the conservative design corridors within which laminar flow is durable and reliable.

Holmes, Bruce J.↗

NASA NTRS1987

A numerical method for the solution of three dimensional, incompressible, viscous flows over slender bodies

A marching iterative method for the solution of the three dimensional, incompressibhle, steady and parabolized Navier-Stokes equations is described. The equations are written in primitive variables and discretized in general axisymmetric orthogonal coordinate systems. The coupled set of finite-difference equations are solved without any splitting or factorization errors. Moreover, the continuity equation and the two crossflow momentum equations are exactly satisfied at every step of the iterative process. The solution scheme is equivalent to the solution of one Poisson equation by the Successive Plane Over Relaxation method and has good convergence properties. Other existing solution methods resemble a Jacobi-type iterative scheme and therefore are less efficient. Numerical experiments include the laminar, incompressible flow over prolate spheroids at incidence.

Rosenfeld, Moshe↗

NASA NTRS1988

Knowledge acquisition for case-based reasoning systems

Case-based reasoning (CBR) is a simple idea: solve new problems by adapting old solutions to similar problems. The CBR approach offers several potential advantages over rule-based reasoning: rules are not combined blindly in a search for solutions, solutions can be explained in terms of concrete examples, and performance can improve automatically as new problems are solved and added to the case library. Moving CBR for the university research environment to the real world requires smooth interfaces for getting knowledge from experts. Described are the basic elements of an interface for acquiring three basic bodies of knowledge that any case-based reasoner requires: the case library of problems and their solutions, the analysis rules that flesh out input problem specifications so that relevant cases can be retrieved, and the adaptation rules that adjust old solutions to fit new problems.

Riesbeck, Christopher K.↗

NASA NTRS1988

Simulation and analysis of image-based navigation system for rotorcraft low-altitude flight

The automation of helicopter NOE flight entails the modification of nominal trajectories on the basis of the detection and location of obstacles by means of onboard sensors. This process is presently studied using a sequence of images from a passive sensor mounted at the helicopter's center of gravity and oriented with the viewing axis along the rotorcraft's longitudinal body-axis. Three different Kalman filters are used to estimate the location of an object on the ground during the course of various simulated helicopter maneuvers; two of the three filters are found to yield good object location estimates.

Sridhar, Banavar↗

NASA NTRS1988

Numerical flow field visualization

The application of computer-generated imagery to analyze numerical solutions of fluid flow is presented. High-performance graphics workstations, their current capabilities, and their use in flow field analysis are discussed. Interactive flow field computations about complex three-dimensional bodies applying computer-generated imagery are projected for the future.

Smith, Robert E.↗

NASA NTRS1989

A set of strongly coupled, upwind algorithms for computing flows in chemical nonequilibrium

Two new algorithms have been developed to predict the flow of viscous, hypersonic, chemically reacting gases over three-dimensional bodies. Both take advantage of the benefits of upwind differencing, Total Variation Diminishing (TVD) techniques and of a finite-volume framework, but obtain their solution in two separate manners. The first algorithym is a time-marching scheme, and is generally used to obtain solutions in the subsonic portions of the flow field. The second algorithm is a much less expensive, space-marching scheme and can be used for the computation of the larger, supersonic portion of the flow field. Both codes compute their interface fluxes with a new temporal Riemann solver and the resulting schemes are made fully implicit including the chemical source terms.

Molvik, Gregory A.↗

NASA NTRS1989

An efficient, explicit finite-rate algorithm to compute flows in chemical nonequilibrium

An explicit finite-rate code was developed to compute hypersonic viscous chemically reacting flows about three-dimensional bodies. Equations describing the finite-rate chemical reactions were fully coupled to the gas dynamic equations using a new coupling technique. The new technique maintains stability in the explicit finite-rate formulation while permitting relatively large global time steps.

Palmer, Grant↗

NASA NTRS1988

Methods for analysis of cracks in three-dimensional solids

Various methods used for determining stress-intensity factors for cracked three-dimensional bodies are reviewed. The review is limited to the determination of mode-I stress-intensity factors. Some exact solutions for cracks in infinite solids are presented, and various approximate methods that have been used for the solution of the boundary-value problem of finite solids with cracks are addressed. The techniques used to extract the stress-intensity factors from these solutions are considered, and various methods used to calculate the stress-intensity factors for through-the-thickness cracks, semielliptical surface cracks, and quarter-elliptical corner cracks at holes are compared for the case of remote tensile loading.

Raju, I. S.↗

NASA NTRS1989

Advanced development of the boundary element method for steady-state heat conduction

Considerable progress has been made in recent years toward advancing the state-of-the-art in solid mechanics boundary element technology. In the present work, much of this new technology is applied in the development of a general-purpose boundary element method (BEM) for steady-state heat conduction. In particular, the BEM implementation involves the use of higher-order conforming elements, self-adaptive integration and multi-region capability. Two- and three-dimensional, as well as axisymmetric analysis, are incorporated within a unified framework. In addition, techniques are introduced for the calculation of boundary flux, and for the inclusion of thermal resistance across interfaces. As a final extension, an efficient formulation is developed for the analysis of solid three-dimensional bodies with embedded holes. For this last class of problems, the new BEM formulation is particularly attractive, since use of the alternatives (i.e. finite element or finite difference methods) is not practical. A number of detailed examples illustrate the suitability and robustness of the present approach for steady-state heat conduction.

Dargush, G. F.↗

NASA NTRS1990

Application of panel methods to wind-tunnel wall interference corrections

Wind-tunnel wall interference effects were estimated using numerical solutions capable of computing the flow field over complex three-dimensional bodies. This approach was then tested by applying it to two typical wind tunnel experiments involving a high-lift wing and a fighter airplane model. In both cases, the static pressure signature along the test section walls was measured and computed for additional validation. The wind-tunnel wall correction method described here, which inherently includes effects of lift and blockage, provides more details than previous semiempirical methods.

Browne, Lindsey↗

NASA NTRS1990

Surface-crack growth: Models, experiments, and structures; Proceedings of the Symposium, Sparks, NV, Apr. 25, 1988

The present volume on surface-crack growth modeling, experimental methods, and structures, discusses elastoplastic behavior, the fracture analysis of three-dimensional bodies with surface cracks, optical measurements of free-surface effects on natural surfaces and through cracks, an optical and finite-element investigation of a plastically deformed surface flaw under tension, fracture behavior prediction for rapidly loaded surface-cracked specimens, and surface cracks in thick laminated fiber composite plates. Also discussed are a novel study procedure for crack initiation and growth in thermal fatigue testing, the growth of surface cracks under fatigue and monotonically increasing load, the subcritical growth of a surface flaw, surface crack propagation in notched and unnotched rods, and theoretical and experimental analyses of surface cracks in weldments.

Reuter, Walter G.↗

NASA NTRS1991

Improved Panel-Method/Potential-Flow Code

Panel code PMARC (Panel Method Ames Research Center) numerically simulates flow field around complex three-dimensional bodies, such as complete aircraft models. Based on potential-flow theory. Written in FORTRAN 77, with exception of namelist extension used for input. Structure facilitates addition of new features to code and tailoring of code to specific problems and computer hardware constraints.

Ashby, Dale L.↗

NASA NTRS1990

Task reports on developing techniques for scattering by 3D composite structures and to generate new solutions in diffraction theory using higher order boundary conditions

There are two tasks described in this report. First, an extension of a two dimensional formulation is presented for a three dimensional body of revolution. With the introduction of a Fourier expansion of the vector electric and magnetic fields, a coupled two dimensional system is generated and solved via the finite element method. An exact boundary condition is employed to terminate the mesh and the fast fourier transformation is used to evaluate the boundary integrals for low O(n) memory demand when an iterative solution algorithm is used. Second, the diffraction by a material discontinuity in a thick dielectric/ferrite layer is considered by modeling the layer as a distributed current sheet obeying generalized sheet transition conditions (GSTC's).

Volakis, John L.↗

NASA NTRS1991

Task reports on developing techniques for scattering by 3D composite structures and to generate new solutions in diffraction theory using higher order boundary conditions

There are two tasks described in this report. First, an extension of a two dimensional formulation is presented for a three dimensional body of revolution. A Fourier series expansion of the vector electric and magnetic fields is employed to reduce the dimensionality of the system, and an exact boundary condition is employed to terminate the mesh. The mesh termination boundary is chosen such that it leads to convolutional boundary operators for low O(n) memory demand. Second, rigorous uniform geometrical theory of diffraction (UTD) diffraction coefficients are presented for a coated convex cylinder simulated with generalized impedance boundary conditions. Ray solutions are obtained which remain valid in the transition region and reduce uniformly those in the deep lit and shadow regions. A uniform asymptotic solution is also presented for observations in the close vicinity of the cylinder.

Volakis, John L.↗

NASA NTRS1991

Control and dynamics of a flexible spacecraft during stationkeeping maneuvers

A case study of a spacecraft having flexible solar arrays is presented. A stationkeeping attitude control mode using both earth and rate gyro reference signals and a flexible vehicle dynamics modeling and implementation is discussed. The control system is designed to achieve both pointing accuracy and structural mode stability during stationkeeping maneuvers. Reduction of structural mode interactions over the entire mode duration is presented. The control mode using a discrete time observer structure is described to show the convergence of the spacecraft attitude transients during Delta-V thrusting maneuvers without preloading thrusting bias to the onboard control processor. The simulation performance using the three axis, body stabilized nonlinear dynamics is provided. The details of a five body dynamics model are discussed. The spacecraft is modeled as a central rigid body having cantilevered flexible antennas, a pair of flexible articulated solar arrays, and to gimballed momentum wheels. The vehicle is free to undergo unrestricted rotations and translations relative to inertial space. A direct implementation of the equations of motion is compared to an indirect implementation that uses a symbolic manipulation software to generate rigid body equations.

Liu, D.↗