Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Characteristics-based methods applied to infinite Prandtl number thermal convection in the hard turbulent regime

Characteristics-based methods for the advection-diffusion equation are presented and directly applied to study thermal convection with extremely large Rayleigh number (Ra). It is shown that the operator-splitting method for advection-diffusion problems is very accurate for determining the advected field at extremely high Peclet number (Pe). The technique presented is considered to have great potential for solving advection-dominated problems, while the Langrangian method is more accurate for lower Pe. It is noted that the accuracy of these characteristics-based methods strongly depends on the quality of interpolation. The computational time for the operator-splitting method grows with the number of time steps employed. The Langrangian method was used for simulations of convection at very high Ra, up to 3 x 10 to the 9th, and time-dependent, thermal convection solutions were obtained for infinite Prandtl number.

Malevsky, A. V.↗
NASA NTRS2002

Graphite Ablation and Thermal Response Simulation Under Arc-Jet Flow Conditions

The Two-dimensional Implicit Thermal Response and Ablation program, TITAN, was developed and integrated with a Navier-Stokes solver, GIANTS, for multidimensional ablation and shape change simulation of thermal protection systems in hypersonic flow environments. The governing equations in both codes are demoralized using the same finite-volume approximation with a general body-fitted coordinate system. Time-dependent solutions are achieved by an implicit time marching technique using Gauess-Siedel line relaxation with alternating sweeps. As the first part of a code validation study, this paper compares TITAN-GIANTS predictions with thermal response and recession data obtained from arc-jet tests recently conducted in the Interaction Heating Facility (IHF) at NASA Ames Research Center. The test models are graphite sphere-cones. Graphite was selected as a test material to minimize the uncertainties from material properties. Recession and thermal response data were obtained from two separate arc-jet test series. The first series was at a heat flux where graphite ablation is mainly due to sublimation, and the second series was at a relatively low heat flux where recession is the result of diffusion-controlled oxidation. Ablation and thermal response solutions for both sets of conditions, as calculated by TITAN-GIANTS, are presented and discussed in detail. Predicted shape change and temperature histories generally agree well with the data obtained from the arc-jet tests.

Chen, Y.-K.↗
DOE OSTI2021

Fourier-like Thermal Relaxation of Nanoscale Explosive Hot Spots

Hot spots are local regions of high temperature that are widely considered to govern explosive initiation. Hot spot dynamics rests on a delicate balance between heat generation due to chemical reactions and heat loss through thermal conduction, making accurate determinations of the conductivity under extreme conditions a key component of predictive explosive models. We develop here an approach to directly determine the thermal transport properties of explosive hot spots with realistic initial structures through a combination of molecular dynamics (MD) and diffusive heat equation (HEq) modeling. Effective thermal conductivity values are determined by fitting HEq models to MD predictions of long timescale hot spot relaxation. The approach is applied to model hot spots in the molecular crystalline explosive 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) for a range of shock strengths and two limiting cases for impact orientation. Isotropic and anisotropic HEq models yield similar results, despite TATB exhibiting some of the largest and most anisotropic thermal conductivity values for explosive near normal conditions. The conductivity is found to be a strong function of density, which parametrically captures dependence on temperature, pressure, and material state. The associated root-mean-square errors of the fitted HEq models are approximately 5% of MD predicted final equilibrium temperatures. Here, the conductivity values determined here for TATB hot spots are considerably larger than those used in a prior hot spot criticality study, which may significantly impact predictions for critical hot spot sizes. The approach provides a convenient foundation for determining the effective thermal conductivity for hot spot problems in other explosives and directly yields information on reasonable approximations that might be taken in higher-level models for those materials.

36 MATERIALS SCIENCE↗
NASA NTRS2015

Ultra-Flexible Thermal Bus for Use in the Astro-H Adiabatic Demagnetization Refrigerator

The adiabatic demagnetization refrigerator (ADR) developed for the Astro-H Soft-X-ray Spectrometer (SXS) is a multi-stage solid-state cooler. It is capable of holding the SXS detector array at 0.050 K for greater than 24 hours with a recycle time of less than one hour. This quick recycle time relies upon high-conductivity thermal straps to couple the individual stages to a pair of heat switches without imposing a lateral load on the paramagnetic salt pills. To accomplish this we construct thermal straps using a technique of diffusion bonding together the ends of high-purity copper straps leaving the length between as individual foils. A thermal bus created this way has a thermal conductivity comparable to a solid strap of the equivalent thickness but with much-increased flexibility. The technique for selecting the base material, machining, cleaning, forming into final shape, and finally bonding together individual foils will be discussed along with examples of complete straps in various geometries.

Thermal Conductivity↗
DOE OSTI2022

Electrical Analysis of Pulsed Laser Annealed Poly-Si:Ga/SiOx Passivating Contacts

High-efficiency single crystalline silicon (c-Si) solar cells require precise control of dopant diffusion profiles and highly active doping concentrations through thermal annealing. Conventional furnace annealing has been successfully employed for dopant diffusion in aluminum back-surface field (Al-BSF), passivated emitter and rear contact (PERC), and Topcon cells. However, furnace annealing limits some next-generation polycrystalline silicon (poly-Si) on SiOx passivating contacts. This limitation largely affects p-type passivating contacts by not being able to: 1) control the dopant diffusion accurately to prevent B segregation at the SiOx and c-Si interface; and 2) provide highly activated doping concentrations for low contact resistivity. In this contribution, we use a nanosecond excimer laser to examine the passivation quality and electrical performance of both B- and Ga-doped poly-Si/SiOx passivating contacts. The core of this method is to take advantage of the nonequilibrium nature of the anneal through rapid melting and recrystallizing the poly-Si in a short timescale and to achieve doping concentrations above the solid solubility limit. Simulations were performed on polished surfaces to visualize the doping diffusion profiles under different laser conditions, and secondary ion mass spectrometry (SIMS) was used to verify the experimental diffusion profiles post pulsed laser melting (PLM). The results show the dopant diffusion profiles can be tuned precisely through PLM. The electrical analysis using VdP-Hall measurements reveals that the active doping concentration reached 10^21 cm-3 for B and ~2×10^21 cm-3 for Ga in poly-Si, far exceeding their solid solubility limit in Si, with a nearly 100% dopant activation achieved for B, and 20% for Ga. This highly activated dopant profile results in a low contact resistivity of <15 mO·cm^2 for B-doped contacts and <40 mO·cm^2 for Ga-doped contacts. We demonstrate that the passivation quality of the laser annealed contacts shows a linear dependency with the laser energy density and the number of pulses. PLM was also performed on random pyramid textured samples, and we found that preferential melting exists for the tips of pyramids, which can be pursued further for selective pinhole opening. Additionally, we perform thermal stability tests of these hyperdoped passivating contacts and show that under certain laser conditions, the B-doped samples exhibit good thermal stability with near full activation for temperatures up to 800°C. Lastly, we transfer this technique to a larger area by overlapping laser spots and show uniform passivation quality and electrical performance. We are currently implementing this PLM annealed p-type passivating contacts into double-side back-junction poly-Si/SiOx passivating contact devices. Our results show that PLM can not only enable the next generation of high-efficiency c-Si photovoltaics technology but can also benefit the c-Si integrated circuit industry through hyperdoping other semiconductors with atoms that may otherwise have a low solubility.

doping diffusion profile↗
DOE OSTI2020

Differences in Sb 2 Te 3 growth by pulsed laser and sputter deposition

High quality van der Waals chalcogenides are important for phase change data storage, thermoelectrics, and spintronics. Using a combination of statistical design of experiments and density functional theory, we clarify how out-of-equilibrium van der Waals epitaxial deposition methods can improve the crystal quality of Sb 2 Te 3 films. We compare films grown by radio frequency sputtering and pulsed laser deposition (PLD). The growth factors that influence the crystal quality for each method are different. For PLD grown films a thin amorphous Sb 2 Te 3 seed layer most significantly influences the crystal quality. In contrast, the crystalline quality of films grown by sputtering is rather sensitive to the deposition temperature and less affected by the presence of a seed layer. This difference is somewhat surprising as both methods are out-of-thermal-equilibrium plasma-based methods. Non-adiabatic quantum molecular dynamics simulations show that this difference originates from the density of excited atoms in the plasma. The PLD plasma is more intense and with higher energy than that used in sputtering, and this increases the electronic temperature of the deposited atoms, which concomitantly increases the adatom diffusion lengths in PLD. In contrast, the adatom diffusivity is dominated by the thermal temperature for sputter grown films. These results explain the wide range of Sb 2 Te 3 and superlattice crystal qualities observed in the literature. Finally, these results indicate that, contrary to popular belief, plasma-based deposition methods are suitable for growing high quality crystalline chalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Optimal carrier concentration for FeSb 2 colossal thermopower

Crystals of FeSb 2 correlated narrow-gap semiconductor host colossal thermopower values. By tuning the impurity level here, we demonstrate that electron-phonon scattering that transfers phonon momentum to electrons is efficient only for certain optimal carrier concentration in the low-mobility band. Phonon drag acting on such states in crystals with high phonon mean free path enhances thermopower to colossal values, whereas for different carrier concentration, dominant thermal transport mechanism is electronic diffusion. This highlights the dual nature of correlated in-gap states that take part in the phonon drag but also reduce phonon mean free path.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2006

Carbon-Nanotube-Carpet Heat-Transfer Pads

Microscopic thermal-contact pads that include carpet-like arrays of carbon nanotubes have been invented for dissipating heat generated in integrated circuits and similarly sized single electronic components. The need for these or other innovative thermal-contact pads arises because the requisite high thermal conductances cannot be realized by scaling conventional macroscopic thermal-contact pads down to microscopic sizes. Overcoming limitations of conventional thermal-contact materials and components, the carbon-nanotube thermal-contact pads offer the high thermal conductivities needed to accommodate the high local thermal power densities of modern electronic circuits, without need for large clamping pressures, extreme smoothness of surfaces in contact, or gap-filling materials (e.g., thermally conductive greases) to ensure adequate thermal contact. Moreover, unlike some conventional thermal-contact components, these pads are reusable. The figure depicts a typical pad according to the invention, in contact with a rough surface on an electronic component that is to be cooled. Through reversible bending and buckling of carbon nanotubes at asperities on the rough surface, the pad yields sufficiently, under relatively low contact pressure, that thermal contact is distributed to many locations on the surface to be cooled, including valleys where contact would not ordinarily occur in conventional clamping of rigid surfaces. Hence, the effective thermal-contact area is greater than that achievable through scaling down of a macroscopic thermal-contact pad. The extremely high longitudinal thermal conductivities of the carbon nanotubes are utilized to conduct heat away from potential hot spots on the surface to be cooled. The fibers protrude from a layer of a filler material (Cu, Ag, Au, or metal-particle- filled gels), which provides both mechanical support to maintain the carbon nanotubes in alignment and thermal conductivity to enhance the diffusion of concentrated heat from the nanotubes into the larger adjacent volume of a heat sink. The array of carbon nanotubes, the filler material, and the heat sink are parts of a unitary composite structure that is fabricated as follows: 1. Using techniques that have been reported previously, the array of substantially perpendicularly oriented carbon nanotubes is grown on a metal, silicon, or other suitable thermally conductive substrate that is intended to become the heat sink. 2. By means of chemical vapor deposition, physical vapor deposition, plasma deposition, ion sputtering, electrochemical deposition, or casting from a liquid phase, some or all of the interstitial volume between carbon nanotubes is filled with the aforementioned layer of mechanically supporting, thermally conductive material. 3. To cause the carbon nanotubes to protrude the desired length from the filler material, an outer layer of filler is removed by mechanical polishing, chemical mechanical polishing, wet chemical etching, electrochemical etching, or dry plasma etching.

Li, Jun↗
DOE OSTI2020

Quantum prediction of ultra-low thermal conductivity in lithium intercalation materials

Lithium-intercalated layered transition-metal oxides, Li x TMO 2, brought about a paradigm change in rechargeable batteries in recent decades and show promise for use in memristors, a type of device for future neural computing and on-chip storage. Thermal transport properties, although being a crucial element in limiting the charging/discharging rate, package density, energy efficiency, and safety of batteries as well as the controllability and energy consumption of memristors, are poorly managed or even understood yet. Here, for the first time, we employ quantum calculations including high-order lattice anharmonicity and find that the thermal conductivity κ of Li x TMO 2 materials is significantly lower than hitherto believed. More specifically, the theoretical upper limit of κ of LiCoO 2 is 6 W/m-K, 2–6 times lower than the prior theoretical predictions. Delithiation further reduces κ by 40–70% for LiCoO 2 and LiNbO 2 . Grain boundaries, strain, and porosity are yet additional causes of thermal-conductivity reduction, while Li-ion diffusion and electrical transport are found to have only a minor effect on phonon thermal transport. The results elucidate several long-standing issues regarding the thermal transport in lithium-intercalated materials and provide guidance toward designing high-energy-density batteries and controllable memristors.

25 ENERGY STORAGE↗
NASA NTRS1992

Convective effects during the physical vapor transport process. I - Thermal convection

The effects of convection on diffusive-convective physical vapor transport process are examined computationally. We analyze conditions ranging from typical laboratory conditions to conditions achievable only in a low gravity environment. This corresponds to thermal Rayleigh numbers Ra(T) ranging from 1.80 to 1.92 x 10 exp 6. Our results indicate that the effect of the sublimation and condensation fluxes at the boundaries is 10 increase the threshold of instability. For typical ground based conditions time dependent oscillatory convection can occur. This results in nonuniform temperature and concentration gradients at the crystal interface. Spectral analysis of the flow field shows regions of both periodic and quasi-periodic states. Low gravity conditions can effectively reduce convective effects, thus resulting in uniform temperature and concentration gradients at the interface, a desirable condition for crystal growth.

Duval, Walter M. B.↗
NASA NTRS1994

Convection in the Physical Vapor Transport Process: Thermal - 1

The effects of convection on diffusive-convective physical vapor transport process are examined computationally. We analyze conditions ranging from typical laboratory conditions to conditions achievable only in a low gravity environment. This corresponds to thermal Rayleigh numbers Ra(sub tau) ranging from 1.80 x 10 to 1.92 x 10(exp 6). Our results indicate that the effect of the sublimation and condensation fluxes at the boundaries is to increase the threshold of instability. For typical ground based conditions, time dependent oscillatory convection can occur. This results in unsteady transport, and non-uniform temperature and concentration gradients at the crystal interface. Spectral analysis of the flow field shows parametric regions exhibiting both an oscillatory approach to steady state and a chaotic transient to a periodic state. Low gravity conditions stabilize the flow field. Convective effects are effectively reduced, thus resulting in uniform temperature and concentration gradients at the interface, a desirable condition for crystal growth.

Duval, Walter M. B.↗
NASA NTRS1978

Eddy diffusivities within Jupiter

The Flasar and Gierasch (1977) model for small-scale thermally driven turbulent convection in rapidly rotating systems is used to estimate eddy diffusivities within Jupiter's atmosphere and interior. It is assumed that heat transport is governed by a mixing-length law, that Jupiter's interior heat flow derives from thermal cooling, and that the entropy loss per nucleon is uniform throughout. A characteristic scalar diffusivity is obtained as a function of pressure level and latitude. The results show that the latitude variation in the diffusivity might be as large as a factor of 100 at 4600 bars. The consequences of such variations are considered.

Flasar, F. M.↗
NASA NTRS1981

Color and temperature signatures of ocean fronts observed with the Nimbus-7 CZCS

The Nimbus-7 Coastal Zone Color Scanner has a unique capability for imaging simultaneously the optical (ocean color) and surface temperature (thermal infrared) signatures of ocean fronts. Examples of such color and temperature visualizations of some ocean fronts delineate virtually identical morphology. In other cases, however, the two signatures are displaced horizontally by tens of km, and display markedly different morphology and fine structure. For example, an image of the Gulf Stream's north wall over the Grand Banks shows the sharpest color front to occur approximately 50 km away from the sharpest temperature front. Moreover, the fine structure of the color front is qualitatively suggestive of disorganized turbulent diffusion, whereas that of the thermal front shows distinctive shear instabilities. These differences can occur because the infrared temperature image represents the top 0.05 millimeter of the sea surface, whereas the ocean color image represents the upper meters to decameters of the sea.

Mueller, J. L.↗
DOE OSTI2021

Diffusion energy barrier of Au on Bi 2 Se 3 : theory and experiment

The stability and diffusion of ultra-thin thermally deposited Au films on Bi 2 Se 3 was studied using scanning tunneling microscopy and density functional theory calculations. The Au/Bi 2 Se 3 interface is of interest as gold is predicted to provide excellent electrical contact while maintaining the spin-polarized characteristics of the electronic states in Bi 2 Se 3 that make the material attractive for spintronic applications. When deposited at room temperature, Au 10 covers the surface with tightly packed islands of nanometer scale dimension. The surface morphology is stable up to 400K. At this annealing temperature, Au atoms have sufficient energy to diffuse across the surface and aggregate into larger nanostructures. At 550K, the Bi 2 Se 3 surface is only sparsely covered, and the Au has formed clusters with length scales 5-10 times larger than the original islands formed at room temperature. Comparison of the experiment and first principle calculation lead to the conclusion that the diffusion energy barrier for Au on Bi 2 Se 3 is as high as 0.47 eV, 15 which is much larger than diffusion barriers on other van der Waals materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Unconventional colloidal aggregation in chiral bacterial baths

Abstract When in equilibrium, thermal forces agitate molecules, which then diffuse, collide and bind to form materials. However, the space of accessible structures in which micron-scale particles can be organized by thermal forces is limited, owing to the slow dynamics and metastable states. Active agents in a passive fluid generate forces and flows, forming a bath with active fluctuations. Two unanswered questions are whether those active agents can drive the assembly of passive components into unconventional states and which material properties they will exhibit. Here we show that passive, sticky beads immersed in a bath of swimmingEscherichia colibacteria aggregate into unconventional clusters and gels that are controlled by the activity of the bath. We observe a slow but persistent rotation of the aggregates that originates in the chirality of theE. coliflagella and directs aggregation into structures that are not accessible thermally. We elucidate the aggregation mechanism with a numerical model of spinning, sticky beads and reproduce quantitatively the experimental results. We show that internal activity controls the phase diagram and the structure of the aggregates. Overall, our results highlight the promising role of active baths in designing the structural and mechanical properties of materials with unconventional phases.

Physics↗
NASA NTRS1999

Diffusion, Fluxes, Friction Forces, and Joule Heating in Two-Temperature Multicomponent Magnetohydrodynamics

The relationship between Joule heating, diffusion fluxes, and friction forces has been studied for both total and electron thermal energy equations, using general expressions for multicomponent diffusion in two-temperature plasmas with the velocity dependent Lorentz force acting on charged species in a magnetic field. It is shown that the derivation of Joule heating terms requires both diffusion fluxes and friction between species which represents the resistance experienced by the species moving at different relative velocities. It is also shown that the familiar Joule heating term in the electron thermal energy equation includes artificial effects produced by switching the convective velocity from the species velocity to the mass-weighted velocity, and thus should not be ignored even when there is no net energy dissipation.

Chang, C. H.↗
DOE OSTI2026

Development of physics-consistent conditional diffusion model to overcome data scarcity in critical heat flux

Deep generative modeling provides a powerful pathway to overcome data scarcity in energy-related applications where experimental data are often limited. By learning the underlying probability distribution of the training dataset, deep generative models, such as the diffusion model, can generate high-fidelity synthetic samples that statistically resemble the training data. Such synthetic data generation can significantly enrich the size and diversity of the available training data, and more importantly, improve the robustness of downstream machine learning models in predictive tasks. The objective of this paper is to investigate the effectiveness of diffusion models for overcoming data scarcity in nuclear energy applications. By leveraging a public dataset on critical heat flux which covers a wide range of commercial nuclear reactor operational conditions, we developed a diffusion model that can generate an arbitrary amount of synthetic samples. Since a vanilla diffusion model can only generate samples randomly, we also developed a conditional diffusion model capable of generating targeted critical heat flux data under user-specified thermal-hydraulic conditions. The performance of the diffusion model was evaluated based on its ability to capture empirical feature distributions and pair-wise correlations, as well as to maintain physical consistency. The results showed that both the diffusion model and conditional diffusion model can successfully generate realistic and physics-consistent critical heat flux data. Furthermore, uncertainty quantification results demonstrate that the conditional diffusion model is highly effective in augmenting critical heat flux data while maintaining acceptable levels of uncertainty.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗