SEARCH · Engineering Papers

Results for “strong coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Axions from 1987A

The process of axion emission from SN 1987A by nucleon-nucleon axion bremsstrahlung is investigated based on neutrino observations. The results indicate that the axion luminosity must be less than about 10 to the 53rd erg/s if: (1) axions couple very weakly (with an axion mass of less than about 0.75 x 10 to the -3rd); or (2) axions couple strongly enough to be trapped and radiated from an axion sphere with T sub a of less than about 8 MeV (with an axion mass of greater than about 2.2 eV). Axion trapping is found to occur for axion masses of greater than about 0.016 eV.

Turner, Michael S.↗

NASA NTRS1988

Optimization of aeroassisted orbital transfer - Current status

This paper presents the theory of optimal aeroassisted orbital transfer, with special consideration given to the transfer about a central body with an atmosphere, with propulsive maneuvers in space modeled as instantaneous changes in the velocity vector. It is shown that there are four potentially optimal transfer modes, two aeroassisted and two all-propulsive, for each point in the two-dimensional transfer space. Aeroassisted orbital transfer introduces a strong coupling between the trajectory design and the vehicle design; a trajectory that minimizes fuel mass without attention to heating may require the vehicle to have a heavy thermal protection system. It is emphasized that, if aeroassisted transfer is to be preferred to all-propulsive transfer, it must offer a reduction in fuel mass greater than the increase in thermal protection mass.

Mease, K. D.↗

NASA NTRS1988

Radar scattering and soil moisture

Research is being conducted on microwave scattering from vegetation. The objective is to develop techniques for measuring parameters of the vegetation canopy (such as biomass) needed for understanding global biogeochemical cycles and to develop techniques for correcting microwave measurements of soil moisture for the effects of the vegetation canopy. Measurements of vegetation and soil moisture are important for understanding the environment on a global scale. For example, moisture in the soil is an important, highly variable, element in the global hydrologic cycle. The hydrologic cycle, in turn, is strongly coupled to weather and climate through moisture (and energy) fluxes at the surface. The amount and distribution of vegetation is an important element in biogeochemical cycles; and knowledge of both the vegetation canopy and soil moisture is of practical importance in agricultural management. These theories are examined.

Levine, D. M.↗

NASA NTRS1988

Evolution of nonlinear polarization in localized and finite amplitude Alfven waves

Theoretical and computational study for a polarization change of localized and finite amplitude Alfven waves propagating parallel to an applied magnetic field is presented using both reductive perturbation theory and numerical simulations. In the magnetohydrodynamic limit, where right-hand and left-hand circularly polarized waves are degenerate, one of the transverse components of the circularly polarized Alfven wave is stable as it propagates, but the other component is unstable to either self-focusing or diffraction effects. Consequently, the wave changes its polarization from circular to linear. In the high frequency regime, where two circularly polarized waves (right-hand and left-hand circularly polarized waves) are not degenerate, two transverse components of the circularly polarized Alfven wave are strongly coupled to each other, and there is almost no polarization change.

Hoshino, M.↗

NASA NTRS1988

Seasonal variation of the semiannual oscillation

Observations of zonally average temperature from the Nimbus-7 Stratospheric and Mesospheric Sounder in 1979-82 show the existence of a significant season variation in the equatorial semiannual oscillation. The first semiannual cycle, beginning in the Northern Hemisphere winter (December-May), is much stronger than the second (June-November) cycle. The balanced winds are calculated from satellite data, showing corresponding seasonality in the semiannual oscillation wind regimes. Strong coupling is observed during the first cycle between equatorial and North Polar temperature. A model of this coupling suggests that planetary Rossby wave momentum deposition in the northern winter is the cause of the seasonal variation in the easterly phase of the semiannual oscillation.

Delisi, Donald P.↗

NASA NTRS1988

Transport critical current and magnetization measurements of melt-processed YBa2Cu3O(7-x)

This paper reports on the magnetic field dependence of the transport critical current and dc magnetic susceptibility measurements on YBa2Cu3O(7-x) superconductors formed by melt-solid reactions at 950 C between Ba-Cu-O (or Tb-Ba-cu-O) and solid nonstoichiometric Y-Ba-Cu oxide. Four-probe dc critical current measurements at 77, 64, and 4.2 K show strong depression of the critical current density with increasing magnetic field, in agreement with a model of weakly linked superconducting regions. Diamagnetic shielding and Meissner flux expulsion measurements in the temperature range 10-300 K show about one-third volume fraction of perfect superconductivity. Both shielding and flux expulsion were observed to be approximately temperature independent below 60 K, indicating strong coupling between the grains throughout the entire volume below this temperature.

Hermann, A. H.↗

NASA NTRS1989

Middle and high latitude Southern Hemispheric oscillations on the 35-60 day time scale

The low-frequency geopotential height fluctuations in the Southern Hemisphere were examined on the basis of one-point correlation maps. Results indicate that the 35-60 day fluctuations in the Southern-Hemisphere geopotential heights exhibit wavetrainlike characteristics. Correlations between a midlatitude reference point and tropical microwave temperature data were found to be weak, suggesting that the midlatitude wavetrain is not strongly coupled to the Madden and Julian (1971) 40-50 day oscillation.

Graves, Charles E.↗

NASA NTRS1990

The secondary spectral component of solar microwave bursts

The multicomponent characteristics of bursts are discussed, with emphasis on the relationship between their primary and secondary components. It is shown that microwave bursts with complex spectra, consisting of two or more spectral components, can be divided into two classes. One class may result from bursts in which the microwave radiation is generated in two different gyrosynchrotron sources that evolve differently in time. The second class is characterized by a common temporal evolution of the spectral components, the similarity of the circular polarization of both components, and the commonality in the ratio of primary to secondary peak frequencies from event to event. These properties suggest that the two components originate in a common source or from individual sources that are strongly coupled. An additionally observed event of this class also suggests that the primary and secondary components have a similar location, but that the surface area of the secondary component is larger.

Stahli, M.↗

NASA NTRS1990

Comparison of three-dimensional nonequilibrium PNS codes

A comparison study has been conducted using four recently developed parabolized Navier-Stokes (PNS) codes which have the capability of predicting finite-rate, chemically reacting flows over three-dimensional bodies. These are the (1) UPS code, (2) the STUFF code, (3) the TONIC code, and (4) the VRA-PNS code. All of the codes use the same seven-species, single-temperature air chemistry model, but otherwise they are unique, with different capabilities and characteristics. The differences include upwinding vs central differencing, strongly-coupled vs weakly-coupled chemistry, shock capturing vs shock fitting, finite volume vs finite difference, and full PNS vs thin-layer PNS equations. Three test cases were utilized to compare the codes. The comparisons presented indicate a good agreement among the codes tested.

Buelow, Philip E.↗

NASA NTRS1988

Helicopter stability and control modeling improvements and verification on two helicopters

A linearized model of helicopter flight dynamics is developed which includes the flapping, lead-lag, and dynamic inflow degrees of freedom (DOF). The model is a combination of analytical terms and numerically determined stability derivatives, and is used to investigate the importance of the rotor DOF to stability and control modeling. The results show that the rotor DOF can have a significant impact on some of the natural modes in a linear model. The flap and dynamic inflow DOF show the greatest influence. Flapping exhibits strong coupling to the body, dynamic inflow, and to lead-lag to a lesser extent. Dynamic inflow tends to damp the high-frequency flapping modes, and reduces the damping on coupled body-flap motion. Dynamic inflow also couples to the flapping motion to produce complex roots. With body-flap and lag regressing modes as exceptions, the results show essentially similar behavior for most modes of articulated and hingeless rotor helicopters.

Schrage, D. P.↗

NASA NTRS1990

Consequences of a hydrous mantle for Venus tectonics - Predictions for Magellan

The consequences of a Venus mantle enriched in water relative to the earth are considered. If the moon-forming impact hypothesis is correct, earth may have lost substantial volatiles. Venus, however, experienced no such impact and is therefore likely to be relatively more water-rich. It is demonstrated that a higher abundance of water in the Venus mantle has the effect of inhibiting the rise of crust-forming melts and volatiles to the surface, which results in a thin stable crust, a dry, stiff upper mantle, and restricted magmatism. Conduction through a shallow thermal lithosphere dominates the removal of heat from the interior, and flow in the mantle is strongly coupled to the surface deformation. Current observations of Venus are consistent with this model. A review of the consequences of this model makes it possible to make predictions for the Magellan radar images.

Williams, David R.↗

NASA NTRS1991

Solution of three-dimensional afterbody flow using reduced Navier-Stokes equations

The flow over afterbody geometries was investigated using the reduced Navier-Stokes (RNS) approximation. Both pressure velocity flux-split and composites velocity primitive variable formulations were considered. Pressure or pseudopotential relaxation procedures are combined with sparse matrix or coupled strongly implicit algorithms to form a three-dimensional solver for general non-orthogonal coordinates. Three-dimensional subsonic and transonic viscous/inviscid interacting flows were evaluated. Solutions with and without regions of recirculation were obtained.

Almahroos, H. M. H.↗

NASA NTRS1990

Optical and electrical properties of thin superconducting films

Infrared spectroscopic techniques can provide a vital probe of the superconducting energy gap which is one of the most fundamental physical properties of superconductors. Currently, the central questions regarding the optical properties of superconductors are how the energy gap can be measured by infrared techniques and at which frequency the gap exists. An effective infrared spectroscopic method to investigate the superconducting energy gap, Eg, was developed by using the Bomem DA 3.01 Fourier Transformation Spectrophotometer. The reflectivity of a superconducting thin film of YBaCuO deposited on SrTiO3 was measured. A shoulder was observed in the superconducting state reflectance R(sub S) at 480/cm. This gives a value of Eg/kT(sub c) = 7.83, where k is the Boltzmann constant and T(sub c) is the superconducting transition temperature, from which, it is suggested that YBaCuO is a very strong coupling superconductor.

Covington, Billy C.↗

NASA NTRS1991

Interphase layer optimization for metal matrix composites with fabrication considerations

A methodology is presented to reduce the final matrix microstresses for metal matrix composites by concurrently optimizing the interphase characteristics and fabrication process. Application cases include interphase tailoring with and without fabrication considerations for two material systems, graphite/copper and silicon carbide/titanium. Results indicate that concurrent interphase/fabrication optimization produces significant reductions in the matrix residual stresses and strong coupling between interphase and fabrication tailoring. The interphase coefficient of thermal expansion and the fabrication consolidation pressure are the most important design parameters and must be concurrently optimized to further reduce the microstresses to more desirable magnitudes.

Morel, M.↗

NASA NTRS1990

Vertical velocities and momentum fluxes derived from wind measurements in the dusk auroral oval

Results are presented on a chemical release experiment carried out on March 20, 1985 in connection with NASA's Cooperative Observations of Polar Electrodynamics I campaign. Simultaneous neutral wind measurements in E region were carried out at three separate locations over a triangular region with sides of about 150 km in the dusk auroral oval, and the three wind profiles were used to calculate values of divergence and vorticity over the area. The vertical velocity over the hight range was calculated using the mass continuity equation, and the instantaneous vertical momentum fluxes in the E region were derived using the combination of horizontal-wind measurements and calculated vertical velocities. Results show that there is strong coupling between layers in the E region and that the momentum-flux-induced accelerations are at least comparable in magnitude to the pressure gradient and Coriolis force accelerations.

Larsen, M. F.↗

NASA NTRS1990

A parallel iterative solution method for systems of nonlinear hyperbolic equations

An iterative algorithm suitable for the solution of a system of nonlinear hyperbolic partial differentiation equations in multiple dimensions is discussed. Current numerical methods for systems of nonlinear PDEs have limited parallelism due to strong coupling between the equations. This method decouples the PDEs by linearizing the convention coefficient for a space-time domain. This provides large grain parallelism. The linearization also allows the treatment of some terms in the equations as source terms, providing more freedom to choose from a wider variety of numerical methods. Smaller grain parallelism may be exploited within the solves for each equation. Thus, the method has potential for parallelism at several levels.

Scroggs, Jeffrey S.↗

NASA NTRS1990

A review of reduced Navier-Stokes computations for compressible viscous flows

A reduced form of the Navier-Stokes equations, defined by a single composite of the Euler, boundary layer, and triple deck approximations, is considered for the computation of viscous interacting flows. Global pressure or pseudopotential relaxation methods are integrated with coupled sparse matrix direct solvers or coupled strongly implicit ILU algorithms to efficiently capture sharp shocks and regions of recirculation. Solutions are obtained for a variety of 2D and 3D geometries and for Mach numbers (M) spanning the range from incompressible (M = 0) to supersonic (M = 6) flow.

Rubin, S. G.↗

NASA NTRS1991

Concurrent tailoring of fabrication process and interphase layer to reduce residual stresses in metal matrix composites

A methodology is presented to reduce the residual matrix stresses in continuous fiber metal matrix composites (MMC) by optimizing the fabrication process and interphase layer characteristics. The response of the fabricated MMC was simulated based on nonlinear micromechanics. Application cases include fabrication tailoring, interphase tailoring, and concurrent fabrication-interphase optimization. Two composite systems, silicon carbide/titanium and graphite/copper, are considered. Results illustrate the merits of each approach, indicate that concurrent fabrication/interphase optimization produces significant reductions in the matrix residual stresses and demonstrate the strong coupling between fabrication and interphase tailoring.

Saravanos, D. A.↗