Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Temperature and composition dependent structural investigation of the defect perovskite series Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3}, 0{<=}x{<=}0.2

The crystal structure of the defect perovskite series Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3} has been investigated over a range of temperatures using high-resolution synchrotron X-ray diffraction, neutron diffraction and electron diffraction. Three distinct regions were observed: 0<x{<=}0.125 was a solid solution of Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3} with minor SrTiO{sub 3} intergrowth, 0.125<x{<=}0.2 was a pure Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3} solid solution adopting the cubic perovskite type structure (Pm3-bar m) and for x>0.2 Sr{sub 0.8}Ti{sub 0.6}Nb{sub 0.4}O{sub 3} and Sr{sub 3}TiNb{sub 4}O{sub 15} formed a two phase region. The cubic structure for Sr{sub 0.8}Ti{sub 0.6}Nb{sub 0.4}O{sub 3} was stable over the temperature range 90-1248 K and the thermal expansion co-efficient was determined to be 8.72(9)x10{sup -6} K{sup -1}. Electron diffraction studies revealed diffuse scattering due to local scale Ti/Nb displacements and slightly enhanced octahedral rotations that did not lead to long range order. The octahedral rotations were observed to 'lock-in' at temperatures below {approx}75 K resulting in a tetragonal structure (I4/mcm) with anti-phase octahedral tilting about the c-axis. - Graphical abstract: Change in cell dimensions for the series Sr{sub 1-x}Ti{sub 1-2x}Nb{sub 2x}O{sub 3}, 0{<=}x{<=}0.2.

36 MATERIALS SCIENCE↗

Microstructure-Property Correlations in Fiber Laser Welded Nb-Ti Microalloyed C-Mn Steel

Mechanical Performance of traditional gas-shielded arc welded joints of 700 MPa grade microalloyed C-Mn steel cannot meet service requirements. Laser welding, with its characteristic high energy density, is known to improve the welding performance of experimental steels. In the present study, Nb-Ti microalloyed steel with a thickness of 4.5 mm was welded using a 4 kW fiber laser. The microstructure, precipitation, and mechanical properties of the welded joints were studied. The hardness and tensile strength of the welded joints were higher than those of the base metal (BM). The microstructure of the fusion zone (FZ) and coarse grain heat affected zone (CGHAZ) was lath martensite (LM), while the microstructure of the fine grain HAZ and mixed grain HAZ consisted of ferrite and martensite/austenite islands. Although LM was observed in both the FZ and CGHAZ, the hardness and calculated tensile strength of the FZ were lower than those of the CGHAZ, due to a reduction in solid solution strengthening by element loss and the dissolution of high-hardness precipitates in FZ. Most precipitates such as [(Nb,Ti)C and (Nb,Ti)(C,N)] that were present in the BM were dissolved, which led to an increase in C and N in solid solution in the FZ. Thus, the elastic modulus of the FZ was higher than that of the BM. Similarly, the elastic modulus of the CGHAZ was higher than that of the BM due to the segregation of C and N atoms during the welding process. The toughness of the FZ was superior to that of the BM, and the toughness of the HAZ approached 91% of that of the BM. The change in toughness primarily depended on the microstructural refinement, the increase in the fraction of grains with high misorientation, the residual austenite in the FZ and CGHAZ, and the dissolution of coarse precipitates.

36 MATERIALS SCIENCE↗

Nanostructured Ni—Cd powders

Nanostructured powders of the Ni—Cd system containing 0–50 mol.% Cd obtained by co-reduction of metal salts from aqueous solutions by hydrazine were studied by X-ray diffraction, optical emission spectroscopy and electron microscopy. The reduction leads to formation of polycrystalline particles of 100–350 nm size, consisting of 10–20 nm crystallites. Phase composition of the powders is substantially different from that predicted by equilibrium on the phase diagram. Instead of a two-phase area consisting of Ni—NiCd intermetallide, other phase states are observed. If the system contains up to 6% Cd, the XRD data indicates the presence of a single-phase solid solution with a face centred cubic (fcc)-structure. The increase in the Cd content to ~40% is accompanied by formation of the NiCd{sub 5} intermetallide phase, along with a solid solution. In the 40–50% Cd content range, the main phases are NiCd{sub 5}, as well as a fcc-phase containing up to 18% Cd and characterized by a strong broadening of the diffraction maxima caused by the presence of 2–3 nm crystallites. Furthermore, the system of such composition contains a previously unknown non-stoichiometric phase based on Ni{sub 3}Cd, having a similar to Cu{sub 3}Au structure. The results serve to clarify compositions of reduction products and the character of the structural-phase transformations of the intermediate hydroxides and metal products during the reduction process. Based on the obtained data, we proposed a formation scheme for the phases that are unconventional for the studied composition region of the Ni-Cd system. It has been concluded that the main factors determining formation of the reduction products are particle nanoscale dimensionality and occurrence of the reduction process far from equilibrium.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Indium and gallium oxynitrides prepared in the presence of Zn{sup 2+} by ammonolysis of the oxide precursors obtained via the citrate route

Ammonia nitridation of indium and gallium oxide precursors obtained through a soft solution route led to their oxynitrides [In{sub 0.97}{open_square}{sub 0.03}][N{sub 0.92}O{sub 0.08}] at 660 {sup o}C and [Ga{sub 0.89}{open_square}{sub 0.11}][N{sub 0.66}O{sub 0.34}] at 850 {sup o}C, respectively, where {open_square} refers to a In or Ga vacancy. Cation vacancies in their wurtzite-type lattice were eliminated in similar preparations with the co-presence of Zn{sup 2+} by forming complete solid solutions of (InN){sub 1-x}(ZnO){sub x} and (GaN){sub 1-y}(ZnO){sub y}. The optical absorption edge shape was found to be relatively steep at the solid solution limits of x {approx} 0.23 and y {approx} 0.33 compared to the case without zinc.

36 MATERIALS SCIENCE↗

Effect of laser sintering on Ti-ZrB2 mixtures

Multi-layer structures of ZrB2 containing 30-70 weight percent (wt%) Ti was fabricated using laser sintering/melting technique. Ti acted as the binding interface for the hard ZrB2 particles. Structural properties and oxidation behavior of laser sintered samples were studied using high temperature X-ray diffraction (HTXRD). HTXRD revealed the formation of boride solid solutions (Zr0.61Ti0.39B2, Zr0.2Ti0.8B2), Zr0.3Ti0.7 and TiB whiskers as well as several oxide species (Ti2ZrO and ZrOx) during laser sintering process. Laser sintered Ti-ZrB2 cermets had high relative densities (> 92%) and hardness values (up to 11.4 GPa). The chemical reaction-enhanced dissolution of ZrB2 into Ti governed the final compositions of the cermets, which provides an opportunity to produce high-density boride solid solutions.

36 MATERIALS SCIENCE↗

Local Structure of Fe–Cr Powders Prepared by Mechanical Alloying

We have studied the structure of Fe–Cr alloys prepared by mechanical alloying. According to X-ray diffraction data, all of the alloys are single-phase and consist of a BCC solid solution. The local structure of the alloys has been studied by Mössbauer spectroscopy. Analysis of the local environment of the Fe atoms leads us to assume clustering processes in the alloy containing 20 at % Cr and suggests that the alloys containing 35 and 50 at % Cr experience phase separation into regions of a homogeneous disordered chromium- enriched solid solution and an iron-enriched imperfect structure containing a considerable amount of dissolved gases.

36 MATERIALS SCIENCE↗

Distribution of the surface potential of epitaxial HgCdTe

We studied the distribution of surface potential of the Hg{sub 1−x}Cd{sub x}Te epitaxial films grown by molecular beam epitaxy. The studies showed that the variation of the spatial distribution of surface potential in the region of the V-defect can be related to the variation of the material composition of epitaxial film. The V-defect is characterized by increased of Hg content with respect to the composition of the solid solution of Hg{sub 1−x}Cd{sub x}Te epitaxial film. In this paper, it was demonstrated that the unformed V-defects can be observed together with the macroscopic V-defects on the epitaxial film surface. These unformed V-defects can allow the creation of a complex surface potential distribution profile due to the redistribution of the solid solution composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Positive Vibrational Entropy of Chemical Ordering in FeV

Inelastic neutron scattering and nuclear resonant inelastic x-ray scattering were used to measure phonon spectra of FeV as a B2 ordered compound and as a bcc solid solution. The two data sets were combined to give an accurate phonon density of states, and the phonon partial densities of states for V and Fe atoms. Contrary to the behavior of ordering alloys studied to date, the phonons in the B2 ordered phase are softer than in the solid solution. Ordering increases the vibrational entropy by +0.22 {+-} 0.03 k{sub B}/atom, which stabilizes the ordered phase to higher temperatures. First-principles calculations show that the number of electronic states at the Fermi level increases upon ordering, enhancing the screening between ions, and reducing the interatomic force constants. The effect of screening is larger at the V atomic sites than at the Fe atomic sites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Research on Phase Reaction of Nb{sub 3}Al Precursor During Rapid Heating Process

Short samples of Nb{sub 3}Al precursor are heated by Ohm heating. The curves of temperature vs heating time are investigated to study the phase reaction of jelly-roll precursor and in situ powder-in-tube precursor during the rapid heating process. A short constant temperature process occurs at about 2000 {sup ∘}C. It is proved that the reaction that generates body-centered cubic (BCC) solid solution phase is reversible. For jelly-roll precursor, metallographic images show that no reaction occurs between Nb/Al roll and Nb matrix. Voids and cracks become larger as the precursor is processed for multiple times. For in situ powder-in-tube precursor, Nb and Al powder is not reacted completely. Using smaller original Nb powder and Al powder is good for the formation of BCC solid solution.

36 MATERIALS SCIENCE↗

Carrier Lifetime in Semiconductors with Band-Gap Widths Close to the Spin-Orbit Splitting Energies

Expressions for the Auger- and radiative-recombination rates are derived in terms of Kane’s model for materials with a band-gap width close to the spin-orbit splitting energy, which is the case for InAs, InAsSb solid solutions, etc. Our results are compared with simplified expressions for recombination rates, frequently used in publications. It is shown that the nonparabolicity of the electronic structure should be taken into account in calculations of the recombination rates. As an example, the temperature dependences of the charge-carrier lifetimes governed by radiative and non-radiative processes are calculated for InAsSb solid solutions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of phase development in non-isothermally annealed mould-cast and heat-treated Al-Mn-Sc-Zr alloys

The effect of Mn addition on microstructure and mechanical properties during isochronal annealing in the temperature range of 20 deg. C - 570 deg. C of the mould-cast and heat-treated Al-Sc-Zr alloys with a various content of Mn and Zr was studied. The electrical resistometry together with the microhardness (HV0.3) measurements were compared to microstructure development. The microstructure development was examined by scanning electron microscopy, transmission electron microscopy and electron diffraction. Relative resistivity changes and the microhardness of the mould-cast and heat-treated Al-Mn-Sc-Zr alloys exhibit similar dependence on annealing temperature. Precipitation of the Al{sub 3}Sc particles is responsible for the peak microhardness in all these alloys. The microhardness decrease is slightly delayed during the isochronal annealing and during the high temperature heat treatment in the mould-cast alloy with the higher Zr-content due to a higher oversaturation of Zr. The decomposition sequence of the oversaturated solid solution of the studied Al-Mn-Sc-Zr alloys is compatible with the recently published decomposition sequence of the Al-Sc-Zr system and also with the formation of Mn,Fe-containing particles. It seems very probable that the addition of Mn does not influence the decomposition of solid solution of the ternary Al-Sc-Zr system. - Research Highlights: {yields} Al{sub 3}Sc particles are responsible for the peak microhardness in all the studied alloys. {yields} The microhardness decrease is delayed in the alloy with the higher Zr-content. {yields} The peak hardening of the heat-treated alloys is shifted to higher temperatures. {yields} Mn does not influence the decomposition sequence of the Al-Sc-Zr system.

36 MATERIALS SCIENCE↗

Structure, thermal expansion and electrical conductivity of Nb-substituted LaCoO{sub 3}

The effect of Nb-substitution in LaCoO{sub 3} has been examined by evaluating the electrical conductivity, thermal expansion and crystal structure of the solid solutions LaCo{sub 1-x}Nb{sub x}O{sub 3} (x=0 to 1/3). It was demonstrated that Nb-substitution in LaCoO{sub 3} was mainly compensated by reduction of Co{sup 3+} to Co{sup 2+}, and that oxidation of Co{sup 2+} could destabilise the solid solution. The ambient crystal structure was shown to transform from rhombohedral R3{sup Macron }c perovskite (x=0) to orthorhombic Pbnm (x=0.15, 0.20) and finally to B-site ordered perovskite P2{sub 1}/n (x=0.25, 1/3) perovskite with increasing Nb-substitution. The thermal expansion of LaCo{sub 1-x}Nb{sub x}O{sub 3} was shown to be strongly depressed with increasing Nb-content, and significantly lower thermal expansion was observed for LaCo{sub 2/3}Nb{sub 1/3}O{sub 3} relative to LaCoO{sub 3}. The electrical conductivity was reduced with increasing Nb-content, and semi-conducting properties was demonstrated for LaCo{sub 1-x}Nb{sub x}O{sub 3} in contrast to the metallic behaviour of pure LaCoO{sub 3} at elevated temperature. The thermal expansion, electrical conductivity and the stability of the materials were discussed with emphasis on Co/Nb ordering, the oxidation state and spin transitions of Co. - Graphical abstract: Substitution of Nb in LaCoO{sub 3} increases the unit cell volume, reduces the symmetry of the unit cell and introduces cation ordering. The chemical substitution leads to suppression of the electronic conductivity and reduces the thermal expansion of the lattice. Highlights: Black-Right-Pointing-Pointer Cation ordering and crystal structure is reported for LaCo{sub x}Nb{sub 1-x}O{sub 3}. Black-Right-Pointing-Pointer Substitution of Nb in LaCoO{sub 3} is compensated by reduction of Co{sup 3+} to Co{sup 2+}. Black-Right-Pointing-Pointer Thermal expansion of LaCoO{sub 3} is reduced by Nb-substitution. Black-Right-Pointing-Pointer Electrical conductivity of LaCoO{sub 3} is reduced by Nb-substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Densification of SDC Barrier Layers

This technical report explores the Enhanced Densification of SCD Barrier Layers A samaria-doped ceria (SDC) barrier layer separates the lanthanum strontium cobalt ferrite (LSCF) cathode from the yttria-stabilized zirconia (YSZ) electrolyte in a solid oxide fuel cell (SOFC) to prevent the formation of electrically resistive interfacial SrZrO 3 layers that arise from the reaction of Sr from the LSCF with Zr from the YSZ. However, the sintering temperature of this SDC layer must be limited to 1200°C to avoid extensive interdiffusion between SDC and YSZ to form a resistive CeO 2 -ZrO 2 solid solution. Therefore, the conventional SDC layer is often porous and therefore not as impervious to Sr-diffusion as would be desired. In the pursuit of improved SOFC performance, efforts have been directed toward increasing the density of the SDC barrier layer without increasing the sintering temperature. The density of the SDC barrier layer can be greatly increased through small amounts of Cu-doping of the SDC powder together with increased solids loading and use of an appropriate binder system in the screen print ink. However, the resulting performance of cells with these barrier layers did not exhibit the expected increase in accordance with that achieved with the prototypical PLD SDC layer. It was determined by XRD that increased sinterability of the SDC also results in increased interdiffusivity between the SDC and YSZ, resulting in formation of a highly resistive solid solution.

30 DIRECT ENERGY CONVERSION↗

Structural evolution and strain induced mixing in Cu–Co composites studied by transmission electron microscopy and atom probe tomography

A Cu–Co composite material is chosen as a model system to study structural evolution and phase formations during severe plastic deformation. The evolving microstructures as a function of the applied strain were characterized at the micro-, nano-, and atomic scale-levels by combining scanning electron microscopy and transmission electron microscopy including energy-filtered transmission electron microscopy and electron energy-loss spectroscopy. The amount of intermixing between the two phases at different strains was examined at the atomic scale using atom probe tomography as complimentary method. It is shown that Co particles are dissolved in the Cu matrix during severe plastic deformation to a remarkable extent and their size, number, and volume fraction were quantitatively determined during the deformation process. From the results, it can be concluded that supersaturated solid solutions up to 26 at.% Co in a fcc Cu–26 at.% Co alloy are obtained during deformation. However, the distribution of Co was found to be inhomogeneous even at the highest degree of investigated strain. - Highlights: • Structural evolution in a deformed Cu–Co composite is studied on all length scales. • Amount of intermixing is examined by atom-probe tomography. • Supersaturated solid solutions up to 26 at.% Co in Cu are observed.

36 MATERIALS SCIENCE↗

Effect of doping and heat treatment on the mechanical parameters of ZnSe{sub (1-x)}Te{sub x} crystals grown from the melt

The mechanical properties of crystals of ZnSe{sub (1-x)}Te{sub x} (0 < x < 1.3 wt %) solid solutions are investigated using the indentation method. The breaking points of doped and undoped crystals are measured by the uniaxial compression method. It is revealed that the microhardness anisotropy coefficient for crystals with a tellurium dopant content of {approx}0.3 wt % is equal to unity. A change in the tellurium content in the solid solutions from 0.2 to 1.3 wt % leads to a linear increase in the microhardness by 23%. The brittle strength of the ZnSe and ZnSe{sub (1-x)}Te{sub x} crystals varies in a similar manner. It is demonstrated that heat treatment and the presence of interblock boundaries affect the ultimate strength and the cracking resistance of the ZnSe{sub (1-x)}Te{sub x} crystals. This is an important factor which should be taken into account in mechanical treatment of the materials under investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase equilibria of the Ba-Sm-Y-Cu-O system for coated conductor applications

The complex phase relationships near the BaO-poor region of the quaternary Ba-Sm-Y-Cu-O oxide system prepared in pure air (p{sub O{sub 2}}=22 kPa, 950 {sup o}C) and in 0.1% O{sub 2} (p{sub O{sub 2}}=100 Pa, 810 {sup o}C) have been determined. This investigation also included the subsolidus compatibilities in ten subsystems (Ba-Sm-Y-O, Ba-Sm-Cu-O, Ba-Y-Cu-O, Sm-Y-Cu-O, Ba-Sm-O, Ba-Y-O, Ba-Cu-O, Sm-Y-O, Sm-Cu-O, and Y-Cu-O), and the homogeneity range of five solid solutions (Ba(Sm{sub x}Y{sub 2-x})CuO{sub 5}, (Sm,Y){sub 2}O{sub 3}, (Sm,Y){sub 2}CuO{sub 4}, (Y,Sm){sub 2}Cu{sub 2}O{sub 5}, and Ba(Sm,Y){sub 2}O{sub 4}). The single phase range of the superconductor solid solution, (Ba{sub 2-x}Sm{sub x})(Sm{sub 1-y}Y{sub y})Cu{sub 3}O{sub 6+z}, and the phase compatibilities in its vicinity, which are particularly important for processing, are described in detail. The phase equilibrium data of the Ba-Sm-Y-Cu-O system will enable the improvement of the intrinsic superconducting properties of second-generation wires, and facilitate the flux-pinning process. -- Graphical Abstract: Phase diagram overview of the Ba-Sm-Y-Cu-O system in the BaO-poor region prepared in p{sub O2}=22 kPa, 950 {sup o}C. Display Omitted

36 MATERIALS SCIENCE↗

Fabrication of platinum nanoparticles in aqueous solution and solid phase using amphiphilic PB-b-PEO copolymer nanoreactors

Graphical abstract: TEM image of Pt nanoparticles produced by reducing by NaBH{sub 4} within PB-b-PEO micelles in aqueous media (scale bar 1 nm). - Highlights: • Pt nanoparticles were synthesized within amphiphilic diblock copolymer micelles. • The effects of reducing agents and precursor dose on Pt np size were investigated. • The effect on fabrication of Pt np by reducing in aqueous and solid phases was compared. • The size of nanoparticles was about 1.4 nm for all doses and reducing agents types. - Abstract: Fabrication of Pt nanoparticles using an amphiphilic copolymer template in aqueous solution was achieved via polybutadiene-block-polyethyleneoxide copolymer micelles, which acted as nanoreactors. In addition, Pt nanoparticles were synthesized using hydrogen gas as the reducing agent in solid state for the first time to compare against solution synthesis. The influences of loaded precursor salt amount to micelles and the type of reducing agent on the size of nanoparticles were investigated through transmission electron microscopy. It was found that increasing the ratio of precursor salt to copolymer and using different type of reducing agent, even in solid phase reduction, did not affect the nanoparticle size. The average size of Pt nanoparticles was estimated to be 1.4 ± 0.1 nm. The reason for getting same sized nanoparticles was discussed in the light of nucleation, growth process, stabilization and diffusion of nanoparticles within micelles.

36 MATERIALS SCIENCE↗

Early age hydration of calcium sulfoaluminate (synthetic ye'elimite, C{sub 4}A{sub 3}S{sup ¯}) in the presence of gypsum and varying amounts of calcium hydroxide

Suspensions of synthetic ye'elimite (C{sub 4}A{sub 3}S{sup ¯}) in a saturated gypsum (CS{sup ¯}H{sub 2}) and calcium hydroxide (CH) solution were examined in-situ in a wet cell by soft X-ray transmission microscopy and ex-situ by scanning electron microscopy. The most voluminous hydration product observed was ettringite. Ettringite commonly displayed acicular, filiform, reticulated, and stellate crystal habits. Additionally, pastes with C{sub 4}A{sub 3}S{sup ¯}, 15% CS{sup ¯}H{sub 2}, and varying amounts of CH were prepared and examined with X-ray diffraction (XRD) and isothermal calorimetry. The XRD experiments showed that increasing CH content caused more solid solution (SO{sub 4}{sup 2−}/OH{sup −}) AFm phases to form at early ages (< 1 d) and more monosulfate to form at later ages (> 1 d). Calorimetry indicated that the increased production of solid solution AFm was accompanied with an increase in the initial (< 30 min) rate of heat evolution, and increasing CH generally reduced the time till the second maximum rate of heat evolution due to the formation of ettringite and monosulfate.

36 MATERIALS SCIENCE↗