Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Solutions for incompressible separated boundary layers including viscous-inviscid interaction

Numerical solutions are presented for the laminar and turbulent boundary-layer equations for incompressible flows with separation and reattachment. The separation angularity is avoided by using an inverse technique in which the displacement thickness is prescribed and the pressure is deduced from the resulting solution. The turbulent results appear qualitatively correct despite the use of a two-layer eddy-viscosity model which is generally assumed appropriate only for mild-pressure-gradient flows. A new viscous-inviscid interaction technique is presented in which the inviscid flow is solved inversely by prescribing the pressure from the boundary-layer solution and deducing the new displacement thickness from the solution of a Cauchy integral. Calculations are presented using this interaction procedure for a laminar flow in which separation and reattachment occur on a solid surface.

Carter, J. E.↗
NASA NTRS1975

Lip noise generated by flow separation from nozzle surfaces

The results of a series of experiments, performed to investigate flow separation and classic lip noise and to aid in understanding aeroacoustic noise generation are presented. Several types of nozzle-lip configurations were used to study the high frequency noise generated by small regions of flow separation at the nozzle lip. These included coaxial nozzles, and circular and slot nozzles with splitter plates. The jet flow velocity was varied and far field noise was measured for all nozzle-lip geometries (coaxial and splitter plate). The effect of a velocity difference across the lip of the coaxial nozzle and the splitter plate on the far field noise was also measured. Finally, an effort was made to find means to reduce the high frequency noise caused by flow separation at the lip.

Olsen, W.↗
NASA NTRS1976

Results of an experimental investigation to determine separation characteristics for the Orbiter/747 using a 0.0125-scale model (48-0 AX1318I-1 747) in the Ames Research Center 14-foot wind tunnel (CA23B)

Aerodynamic separation data obtained from a wind tunnel test of an 0.0125-scale SSV Orbiter model of a VC70-000002 Configuration and a 0.0125-scale 747 model was presented. Separation data was obtained at a Mach number of 0.6 and three incidence angles of 4, 6, and 8 degrees. The orbiter angle of attack was varied from 0 to 14 degrees. Longitudinal, lateral and normal separation increments were obtained for fixed 747 angles of attack of 0, 2, and 4 degrees while varying the orbiter angle of attack. Control surface settings on the 747 carrier included rudder deflections of 0 and 10 degrees and horizontal stabilizer deflections of -1 and +5 degrees.

Esparza, V.↗
NASA NTRS1976

Separation of granulocytes from whole blood by leukoadhesion, phase 1

Capillary glass tubes are investigated for the separation and retrieval of large quantities of viable granulocytes and monocytes from whole blood on a continuous basis from a single donor. This effort represented the feasibility demonstration of a three phase program for development of a capillary tube cell separation device. The activity included the analysis and parametric laboratory testing with subscale models required to design a prototype device. Capillary tubes 40 cm long with a nominal 0.030 cm internal diameter yielded the highest total process efficiency. Recovery efficiencies as high as 89% of the adhering cell population were obtained. Granulocyte phagocytosis of latex particles indicated approximately 90% viability. Monocytes recovered from the separation column retained their capability to stimulate human bone marrow colony growth, as demonstrated in an in vitro cell culture assay.

Source record↗
NASA NTRS1976

Stage separation study of Nike-Black Brant V Sounding Rocket System

A new Sounding Rocket System has been developed. It consists of a Nike Booster and a Black Brant V Sustainer with slanted fins which extend beyond its nozzle exit plane. A cursory look was taken at different factors which must be considered when studying a passive separation system. That is, one separation system without mechanical constraints in the axial direction and which will allow separation due to drag differential accelerations between the Booster and the Sustainer. The equations of motion were derived for rigid body motions and exact solutions were obtained. The analysis developed could be applied to any other staging problem of a Sounding Rocket System.

Ferragut, N. J.↗
NASA NTRS1976

Three-dimensional boundary layers approaching separation

The theory of semi-similar solutions of the laminar boundary layer equations is applied to several flows in which the boundary layer approaches a three-dimensional separation line. The solutions obtained are used to deduce the nature of three-dimensional separation. It is shown that in these cases separation is of the "ordinary" type. A solution is also presented for a case in which a vortex is embedded within the three-dimensional boundary layer.

Williams, J. C., III↗
NASA NTRS1977

Quick look analysis of an emergency separation for ALT captive-inert flight 1

Emergency separation capability for the landing configuration of ALT Captive Inert Flight Number One was investigated. The quick look analysis confirms emergency separation capability under nominal conditions for the ALT landing configuration. The recommended emergency separation procedure under those conditions is not applicable to all ALT configurations.

Glenn, G. M.↗
NASA NTRS1977

Boundary layer separation on isolated boattail nozzles

The phenomenon of separated flow on a series of circular-arc afterbodies was investigated using the Langley 16-foot transonic tunnel at free-stream Mach numbers from 0.40 to 0.95 at 0 deg angle of attack. Both high-pressure air and solid circular cylinders with a diameter equal to the nozzle exit diameter were used to simulate jet exhausts. A detailed data base of boundary layer separation locations was obtained using oil-flow techniques. The results indicate that boundary layer separation is most extensive on steep boattails at high Mach numbers.

Abeyounis, W. K.↗
NASA NTRS1977

Isotope separation using metallic vapor lasers

The isotope U235 is separated from a gasified isotope mixture of U235 and U238 by selectively exciting the former from the ground state utilizing resonant absorption of radiation from precisely tuned lasers. The excited isotope is then selectively ionized by electron bombardment. It then is separated from the remaining isotope mixture by electromagnetic separation.

Russell, G. R.↗
NASA NTRS1977

Investigation of supersonic turbulent boundary-layer separation on a compression ramp by an integral method

An investigation was made to determine the feasibility of using a boundary layer integral method to study the separation of a turbulent boundary layer on a two dimensional ramp at supersonic speeds. The numerical calculations were made for a free stream Mach number of 3, a Reynolds number of 10 million, and over a ramp angle range from 0 deg to 30 deg. For ramp angles where no flow separation was indicated, theoretical calculations were in reasonable agreement with experimental data except for a somewhat belated rise in pressure. For larger ramp angles, where separation was present, the investigation produced results that were not in agreement with experiment or with results calculated by time dependent Navier-Stokes methods. This apparently was true because no provision had been made for a proper shock boundary layer interaction where strong normal pressure gradients are induced within the boundary layer under the shock independent of surface curvature effects.

Patel, D. K.↗
NASA NTRS1977

The effects of flow separation on shuttle dynamics and aeroelastic stability

The effects of flow separation on the dynamic and aeroelastic stability of various shuttle configurations have been investigated. Flow separation is shown to affect the aeroelastic stability of the 747/Orbiter yaw modes, the orbiter dynamic stability and possibly the aeroelastic stability of the wing torsional mode, and to dominate both the dynamic and aeroelastic stability of the launch configuration. Limit cycle oscillations of certain launch configuration modes are the result of sudden flow separation. The limit cycle oscillations threaten the structural integrity in two ways: (1) by outright overstressing of the structure due to large modal deflection, (2) by fatigue due to the continued flexing of the structure. Fatigue is a more significant consideration for the reusable (100 flights) shuttle than it has been for previous space boosters.

Reding, J. P.↗
NASA NTRS1977

Experiments on transonic and supersonic turbulent boundary-layer separation

Results of experimental investigations into turbulent boundary-layer behavior under the influence of pressure gradients and with separation are presented for transonic and supersonic flow fields. In the transonic case, an axisymmetric model was implemented consisting of an annular circular arc bump affixed to a circular cylinder aligned with the flow direction. For the supersonic separation study, an oblique shock wave impinging on the wind tunnel wall boundary layer was employed to cause separation. The mean streamwise and normal velocity components as well as the respective turbulence intensities were obtained with a two-color frequency shifted laser velocimeter.

Bachalo, W. D.↗
NASA NTRS1977

Studies of flow separation and stalling on one- and two-element airfoils at low speeds

Research has been conducted on the nature of airfoil behavior at pre- and post-separated angles of attack. Detailed wind tunnel studies have been made of boundary layer and wake fields for the GA(W)-1 airfoil, and the airfoil with a 0.3 chord Fowler flap. Experimental data are compared with theoretical predictions from a multi-element viscous flow computer program. Theoretical predictions are reasonably accurate for unseparated flows, but have serious errors when separation is present. Some recent techniques for modeling post-separated flow behavior are discussed in light of the present experiments.

Seetharam, H. C.↗
NASA NTRS1977

Flow separation detector

An arrangement for sensing the fluid separation along a surface which employs a thermally insulating element having a continuous surface blending into and forming a part of the fluid flow surface is described. A sudden decrease in the temperature of the downstream sensor conductor and concomitant increase in the temperature of the upstream sensor conductor is an indication of the separation. When the temperatures are returned to the state achieved during normal flow, the indicator thereby indicates the normal, attached fluid flow. The conductors may be, for example, wires or thin films, and should be within the viscous sub-layer of the expected fluid flow. A single heater and several pairs of sensors and corresponding sensor conductors may be used to detect not only the fluid flow and the separation, but the direction of the fluid flow, over the fluid flow surface.

Mateer, G. C.↗
NASA NTRS1978

Phenomenological aspects of quasi-stationary controlled and uncontrolled three-dimensional flow separations

Quasi-steady three dimensional separated flows about bodies of large fineness ratio operating at large angles of incidence or yaw are discussed. The general character of the three dimensional attached boundary layer, the concept of limiting streamlines, and the physics of three dimensional separation and reattachment are among the factors considered. Specific examples are given. The advantages of swept, sharp edges that generate controlled (or fixed) three dimensional flow separations on a vehicle, due to the qualitatively unchanging flow field developed throughout the range of flight conditions, are emphasized.

Peake, D. J.↗
NASA NTRS1978

Space shuttle separation mechanisms

The development of space shuttle separation devices is reviewed to illustrate the mechanisms involved in separating the Orbiter from the Boeing 747 carrier aircraft and from the externally mounted propellant tank. Other aspects of the separation device development discussed include design evolution, operational experience during the orbiter approach and landing tests, and the work required to produce an operational system.

Rogers, W. F.↗
NASA NTRS1978

Thin-layer approximation and algebraic model for separated turbulent flows

An algebraic turbulence model for two- and three-dimensional separated flows is specified that avoids the necessity for finding the edge of the boundary layer. Properties of the model are determined and comparisons made with experiment for an incident shock on a flat plate, separated flow over a compression corner, and transonic flow over an airfoil. Separation and reattachment points from numerical Navier-Stokes solutions agree with experiment within one boundary-layer thickness. Use of law-of-the-wall boundary conditions does not alter the predictions significantly. Applications of the model to other cases are contained in companion papers.

Baldwin, B.↗
NASA NTRS1978

Two-dimensional separated wake modeling and its use to predict maximum section lift coefficient

A technique for computing the lift of separating multielement airfoils in incompressible flow is presented. The procedure employs repeated application of a panel method to solve for the separated wake displacement surface using entirely inviscid boundary conditions. Results are presented that compare computed pressure distributions with those measured in the wind tunnel for airfoils with one, two, and four elements with separation on each element. A method employing this technique is presented which shows promise in predicting airfoil section lift through stall.

Henderson, M. L.↗