SEARCH · Engineering Papers

Results for “reasonable accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Tunable plasmon-enhanced second-order optical nonlinearity in transition-metal dichalcogenide nanotriangles (Final Report for SC0008712)

The control of light-matter interaction at the nanoscale is a grand challenge that cuts across modern photonics, plasmonics, and optoelectronics. The development of simulation tools for predictive modeling of nanostructured light emitters and absorbers is critical to successfully tackling this grand challenge. Existing state-of-the-art tools are not suitable for the following reasons: a) Phenomenological models of materials, commonly employed in the full-wave solutions to Maxwell’s equations, are fit to experimental data for bulk materials and fall short when attempting to analyze nanostructures. b) Nonlinearities in optical response can arise solely from nanostructuring, and require time-dependent quantum electronic transport techniques to capture. c) Emergent materials with exotic and tunable physical properties are increasingly used, but their properties are very sensitive to the substrate, impurities, and edge termination, and require an accurate description of interband and intraband processes, as well as dissipation. d) Microscopic modeling of electronic transport usually employs simplified electrodynamics, and realistic models that couple full electronic transport with full-wave electrodynamics are needed for accurate photonics simulations. The objective of this project was to computational tools that will overcome the limitations faced by current modeling tools and provide an unprecedented level of accuracy for predictive modeling of light-matter interaction at the nanoscale.

36 MATERIALS SCIENCE↗

NASA NTRS2008

Modeling State-Space Aeroelastic Systems Using a Simple Matrix Polynomial Approach for the Unsteady Aerodynamics

A simple matrix polynomial approach is introduced for approximating unsteady aerodynamics in the s-plane and ultimately, after combining matrix polynomial coefficients with matrices defining the structure, a matrix polynomial of the flutter equations of motion (EOM) is formed. A technique of recasting the matrix-polynomial form of the flutter EOM into a first order form is also presented that can be used to determine the eigenvalues near the origin and everywhere on the complex plane. An aeroservoelastic (ASE) EOM have been generalized to include the gust terms on the right-hand side. The reasons for developing the new matrix polynomial approach are also presented, which are the following: first, the "workhorse" methods such as the NASTRAN flutter analysis lack the capability to consistently find roots near the origin, along the real axis or accurately find roots farther away from the imaginary axis of the complex plane; and, second, the existing s-plane methods, such as the Roger s s-plane approximation method as implemented in ISAC, do not always give suitable fits of some tabular data of the unsteady aerodynamics. A method available in MATLAB is introduced that will accurately fit generalized aerodynamic force (GAF) coefficients in a tabular data form into the coefficients of a matrix polynomial form. The root-locus results from the NASTRAN pknl flutter analysis, the ISAC-Roger's s-plane method and the present matrix polynomial method are presented and compared for accuracy and for the number and locations of roots.

Pototzky, Anthony S.↗

NASA NTRS2003

Calibrating Laser Gas Measurements by Use of Natural CO2

An improved method of calibration has been devised for instruments that utilize tunable lasers to measure the absorption spectra of atmospheric gases in order to determine the relative abundances of the gases. In this method, CO2 in the atmosphere is used as a natural calibration standard. Unlike in one prior calibration method, it is not necessary to perform calibration measurements in advance of use of the instrument and to risk deterioration of accuracy with time during use. Unlike in another prior calibration method, it is not necessary to include a calibration gas standard (and the attendant additional hardware) in the instrument and to interrupt the acquisition of atmospheric data to perform calibration measurements. In the operation of an instrument of this type, the beam from a tunable diode laser or a tunable quantum-cascade laser is directed along a path through the atmosphere, the laser is made to scan in wavelength over an infrared spectral region that contains one or two absorption spectral lines of a gas of interest, and the transmission (and, thereby, the absorption) of the beam is measured. The concentration of the gas of interest can then be calculated from the observed depth of the absorption line(s), given the temperature, pressure, and path length. CO2 is nearly ideal as a natural calibration gas for the following reasons: CO2 has numerous rotation/vibration infrared spectral lines, many of which are near absorption lines of other gases. The concentration of CO2 relative to the concentrations of the major constituents of the atmosphere is well known and varies slowly and by a small enough amount to be considered constant for calibration in the present context. Hence, absorption-spectral measurements of the concentrations of gases of interest can be normalized to the concentrations of CO2. Because at least one CO2 calibration line is present in every spectral scan of the laser during absorption measurements, the atmospheric CO2 serves continuously as a calibration standard for every measurement point. Figure 1 depicts simulated spectral transmission measurements in a wavenumber range that contains two absorption lines of N2O and one of CO2. The simulations were performed for two different upper-atmospheric pressures for an airborne instrument that has a path length of 80 m. The relative abundance of CO2 in air was assumed to be 360 parts per million by volume (approximately its natural level in terrestrial air). In applying the present method to measurements like these, one could average the signals from the two N2O absorption lines and normalize their magnitudes to that of the CO2 absorption line. Other gases with which this calibration method can be used include H2O, CH4, CO, NO, NO2, HOCl, C2H2, NH3, O3, and HCN. One can also take advantage of this method to eliminate an atmospheric-pressure gauge and thereby reduce the mass of the instrument: The atmospheric pressure can be calculated from the temperature, the known relative abundance of CO2, and the concentration of CO2 as measured by spectral absorption. Natural CO2 levels on Mars provide an ideal calibration standard. Figure 2 shows a second example of the application of this method to Mars atmospheric gas measurements. For sticky gases like H2O, the method is particularly powerful, since water is notoriously difficult to handle at low concentrations in pre-flight calibration procedures.

Webster, Chris↗

DOE OSTI2023

Unraveling the 2021 Central Tennessee flood event using a hierarchical multi-model inundation modeling framework

Flood prediction systems need hierarchical atmospheric, hydrologic, and hydraulic models to predict rainfall, runoff, streamflow, and floodplain inundation. The accuracy of such systems depends on the error propagation through the modeling chain, sensitivity to input data, and choice of models. In this study, we used multiple precipitation forcings (hindcast and forecast) to drive hydrologic and hydrodynamic models to analyze the impacts of various drivers on the estimates of flood inundation depth and extent. We implement this framework to unravel the August 2021 extreme flooding event that occurred in Central Tennessee, USA. We used two radar-based quantitative precipitation estimates (STAGE4 and MRMS) as well as quantitative precipitation forecasts (QPF) from the National Weather Service Weather Prediction Center (WPC) to drive a series of models in the hierarchical framework, including the Variable Infiltration Capacity (VIC) land surface model, the Routing Application for Parallel Computation of Discharge (RAPID) river routing model, and the AutoRoute and TRITON inundation models. An evaluation with observed high-water marks demonstrates that the framework can reasonably simulate flood inundation. Despite the complex error propagation mechanism of the modeling chain, we show that inundation estimates are most sensitive to rainfall estimates. Most notably, QPF significantly underestimates flood magnitudes and inundations leading to unanticipated severe flooding for all stakeholders involved in the event. Finally, we discuss the implications of the hydrodynamic modeling framework for real-time flood forecasting.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1993

In-situ radio-metric tracking to support navigation for interplanetary missions with multiple spacecraft

Doppler and ranging measurements between spacecraft can be obtained only when the ratio of the total received signal power to noise power density (P(sub t/N(sub 0)) at the receiving spacecraft is sufficiently large that reliable signal detection can be achieved within a reasonable time period. In this paper, the requirements on P(sub t)/N(sub 0) for reliable carrier signal detection is calculated as a function of various system parameters, including characteristics of the spacecraft computing hardware and a priori uncertainty in spacecraft-spacecraft relative velocity and acceleration. Also calculated is the P(sub t)/N(sub 0) requirement for relaible detection of a ranging signal, consistting of a carrier with pseudo-noise phase modulation. Once the P(sub t)/N(sub 0) requirement is determined, then for a given set of assumed spacecraft telecommunication characteristics (transmitted signal power, antenna gains, receiver noise temperatures) it is possible to calculate the maximum range at which a carrier signal or ranging signal may be acquired. A brief error covariance analysis has been conducted to illustrate the utility of in situ Doppler and ranging measurements for Mars approach navigation. The results indicate that navigation accuracies of a few kilometers can be achieved with either data type. The analysis also illustrates dependency of the achievable accuracy on the approach trajectory velocity.

Kahn, Robert D.↗

NASA NTRS1995

Aspects of atmospheric science and instrumentation for martian missions

There are four main reasons which make observations of meteorological phenomena in the Martian atmosphere important: (1) Meteorology as science, (2) Comparative meteorology between the Earth and Mars, (3) Other instruments need information about meteorological parameters, (4) Weather conditions essentially affect planning of safe future landings on Mars. The Earth and Mars have almost equal rotation periods and axial tilts, and hence similarities in the meteorology of these planets are considerable. At present, the number of theoretical modelling results of the Martian atmosphere is much larger than measured data, so measurements are urgently needed. Both in-situ observations on the planetary surface and remote sensing from an orbiter are necessary. The former give important ground-truth data to the latter. This paper outlines some open issues in Martian atmospheric research, and introduces promising capacitive micro sensors developed by the Vaisala Ltd, Finland, to be used in meteorological instrumentation for Mars. Due to the sensors' accuracy, light weight and low power consumption, they are very suitable for planetary exploration purposes.

Harri, A.-M.↗

DOE OSTI2021

Correction and verification of x-ray imaging crystal spectrometer analysis on Wendelstein 7-X through x-ray ray tracing

X-ray ray tracing is used to develop ion-temperature corrections for the analysis of the X-ray Imaging Crystal Spectrometer (XICS) used at Wendelstein 7-X (W7-X) and perform verification on the analysis methods. The XICS is a powerful diagnostic able to measure ion-temperature, electron-temperature, plasma flow, and impurity charge state densities. While these systems are relatively simple in design, accurate characterization of the instrumental response and validation of analysis techniques are difficult to perform experimentally due to the requirement of extended x-ray sources. For this reason, a ray tracing model has been developed that allows characterization of the spectrometer and verification of the analysis methods while fully considering the real geometry of the XICS system and W7-X plasma. Through the use of ray tracing, several important corrections have been found that must be accounted for in order to accurately reconstruct the ion-temperature profiles. The sources of these corrections are described along with their effect on the analyzed profiles. The implemented corrections stem from three effects: (1) effect of sub-pixel intensity distribution during de-curving and spatial binning, (2) effect of sub-pixel intensity distribution during forward model evaluation and generation of residuals, and (3) effect of defocus and spherical aberrations on the instrumental response. Possible improvements to the forward model and analysis procedures are explored, along with a discussion of trade-offs in terms of computational complexity. Finally, the accuracy of the tomographic inversion technique in stellarator geometry is investigated, providing for the first time a verification exercise for inversion accuracy in stellarator geometry and a complete XICS analysis tool-chain.

47 OTHER INSTRUMENTATION↗

NASA NTRS1987

Development of response models for the Earth Radiation Budget Experiment (ERBE) sensors. Part 3: ERBE scanner measurement accuracy analysis due to reduced housekeeping data

The accuracy of scanner measurements was evaluated when the sampling frequency of sensor housekeeping (HK) data was reduced from once every scan to once every eight scans. The resulting increase in uncertainty was greatest for sources with rapid or extreme temperature changes. This analysis focused on the mirror attenuator mosaic (MAM) baffle and plate and scanner radiometer baffle due to their relatively high temperature changes during solar calibrations. Since only solar simulator data were available, the solar temperatures were approximated on these components and the radiative and thermal gradients in the MAM baffle due to reflected sunlight. Of the two cases considered for the MAM plate and baffle temperatures, one uses temperatures obtained from the ground calibration. The other attempt uses temperatures computed from the MAM baffle model. This analysis shows that the heat input variations due largely to the solar radiance and irradiance during a scan cycle are small. It also demonstrates that reasonable intervals longer than the current HK data acquisition interval should not significantly affect the estimation of a radiation field in the sensor field-of-view.

Choi, Sang H.↗

DOE OSTI2020

Development and Validation of a Two-Phase Thermal-Hydraulic CFD Code NEK-2P

A project is underway to develop, verify and validate an advanced two-phase flow modeling capability for the highly-scalable, high-performance Computational Fluid Dynamics (CFD) code NEK5000. The goal of this work is to verify and validate the two-phase version of the NEK5000 code, named NEK-2P, to simulate the two-phase flow and heat transfer phenomena that occur in a Boiling Water Reactor (BWR) fuel bundle under various operating conditions. The NEK-2P two-phase flow models follow the approach used for the Extended Boiling Framework (EBF) previously developed at Argonne but include more fundamental physical models of boiling phenomena and advanced numerical algorithms for improved computational accuracy, robustness, and computational speed. The development of the NEK-2P two-phase solver and the implementation of the Extended Boiling Framework two-phase models were initially supported by Argonne National Laboratory (Argonne) through a Laboratory Directed Research and Development (LDRD) project during FY2014-2016. The development and validation of the two-phase models through analyses of selected two-phase boiling flow experiments was supported by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in FY2017-2020. This report focuses on verification and validation of the water-steam boiling model NEK-2P Two-Phase, CFD code. The NEK-2P was validated with Nuclear Power Engineering Corporation (NUPEC) Pressurized Water Reactor (PWR) Sub-channel and Bundle Test (PSBT) void distribution benchmark. Three different simulations were performed and analyzed for various operating conditions such as wall-heat flux and sub-cooled inlet temperatures. Reasonably good agreement with measured data was obtained in predicting the measured void distributions. Simulations were performed for Virginia Tech. (VT) 3x3 rod bundle geometry with and without spacers. The preliminary results were presented for Simplified Spacer Grid (SSG). In addition, the implementation of interface reconstruction model was tested with one of the Becker benchmark Critical Heat Flux (CHF) experiments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA NTRS2013

Commercial Non-Dispersive Infrared Spectroscopy Sensors for Sub-Ambient Carbon Dioxide Detection

Carbon dioxide produced through respiration can accumulate rapidly within closed spaces. If not managed, a crew's respiratory rate increases, headaches and hyperventilation occur, vision and hearing are affected, and cognitive abilities decrease. Consequently, development continues on a number of CO2 removal technologies for human spacecraft and spacesuits. Terrestrially, technology development requires precise performance characterization to qualify promising air revitalization equipment. On-orbit, instrumentation is required to identify and eliminate unsafe conditions. This necessitates accurate in situ CO2 detection. Recursive compensation algorithms were developed for sub-ambient detection of CO2 with commercial off-the-shelf (COTS) non-dispersive infrared (NDIR) sensors. In addition, the source of the exponential loss in accuracy is developed theoretically. The basis of the loss can be explained through thermal, Doppler, and Lorentz broadening effects that arise as a result of the temperature, pressure, and composition of the gas mixture under analysis. The objective was to develop a mathematical routine to compensate COTS CO2 sensors relying on NDIR over pressures, temperatures, and compositions far from calibration conditions. The routine relies on a power-law relationship for the pressure dependency of the sensors along with an equivalent pressure to account for the composition dependency. A Newton-Raphson iterative technique solves for actual carbon dioxide concentration based on the reported concentration. Moreover, first principles routines were established to predict mixed-gas spectra based on sensor specifications (e.g., optical path length). The first principles model can be used to parametrically optimize sensors or sensor arrays across a wide variety of pressures/temperatures/ compositions. In this work, heuristic scaling arguments were utilized to develop reasonable compensation techniques. Experimental results confirmed this approach and provided evidence that composition broadening significantly alters spectra when pressure is reduced. Consequently, a recursive compensation technique was developed with the Newton-Raphson method, which was subsequently verified through experimentation.

Swickrath, Michael J.↗

DOE OSTI2025

Denoising Autoencoder for Reconstructing Sensor Observation Data and Predicting Evapotranspiration: Noisy and Missing Values Repair and Uncertainty Quantification

Abstract Machine learning (ML) methods applied in scientific research often deal with interrelated features in high‐dimensional data. Reducing data noise and redundancy is needed to increase prediction accuracy and efficiency especially when dealing with data from field sensors. We explored an unsupervised learning method, the denoising autoencoder (DAE), to extract the underlying data structure from noisy raw data in the context of predicting hydrologic quantities from multiple field sensors. These sensors have intrinsic instrumental noise and occasional malfunctions that cause missing values. Our DAE neural network reconstructed meteorological sensor data containing noise and missing values to predict evapotranspiration in a mountainous watershed. The DAE reconstructed the sensor variables with a mean coefficient of determination value of 0.77 across 15 dimensions representing individual sensors. It reduced variance and bias uncertainties compared to a classical autoencoder model. The reconstruction quality varied across dimensions depending on their cross‐correlation and alignment with the underlying data structure. Uncertainties arising from the model structure were overall higher than those resulting from data corruption. We attached the DAE structure to a downstream ET‐prediction neural network in three formats and achieved reasonably accurate ET predictions . The use of the DAE notably reduced variance uncertainty in ET prediction. However, excessive variance reduction may be accompanied by an increase in bias due to the intrinsic bias‐variance tradeoff. Our method of evaluating and reducing uncertainties in aggregated data from different sources can be used to improve predictive models, process understanding, and uncertainty quantification for better water resource management. Plain Language Summary We present a machine learning method, namely the denoising autoencoder, which reduces the effects of data noise and missing values typically present in scientific data sets collected through sensor measurements. This method selects the most relevant information from noisy raw data collected by the instruments and fills in missing values. To demonstrate the effectiveness of our method, we applied it to predict evapotranspiration, a hydrologic variable that represents the water moved from the land surface to the atmosphere through a combination of evaporation and plant water use (transpiration). We also used a random sampling technique (the Monte Carlo method) to compare the uncertainty in the predictions when using the raw and noisy data versus the reconstructed data. The denoising process produced more accurate predictions of evapotranspiration with less uncertainty. Improved predictions of evapotranspiration can lead to a better understanding and accounting of water budgets. This ML approach is broadly suitable for a wide variety of applications that involve noisy sensor data with missing values. Key Points We used a denoising autoencoder (DAE) neural network to reduce noise in meteorological and soil sensor observations by on average We used Monte Carlo sampling to estimate the bias and variance of all model outputs, including uncertainty sources from data and the model We attached the DAE component to a downstream neural network to predict ET with the variance reduced by , compared to that without the DAE

denoising autoencoder↗

NASA NTRS2017

Validation of a Solid Rocket Motor Internal Environment Model

In a prior effort, a thermal/fluid model of the interior of Penn State University's laboratory-scale Insulation Test Motor (ITM) was constructed to predict both the convective and radiative heat transfer to the interior walls of the ITM with a minimum of empiricism. These predictions were then compared to values of total and radiative heat flux measured in a previous series of ITM test firings to assess the capabilities and shortcomings of the chosen modeling approach. Though the calculated fluxes reasonably agreed with those measured during testing, this exercise revealed means of improving the fidelity of the model to, in the case of the thermal radiation, enable direct comparison of the measured and calculated fluxes and, for the total heat flux, compute a value indicative of the average measured condition. By replacing the P1-Approximation with the discrete ordinates (DO) model for the solution of the gray radiative transfer equation, the radiation intensity field in the optically thin region near the radiometer is accurately estimated, allowing the thermal radiation flux to be calculated on the heat-flux sensor itself, which was then compared directly to the measured values. Though the fully coupling the wall thermal response with the flow model was not attempted due to the excessive computational time required, a separate wall thermal response model was used to better estimate the average temperature of the graphite surfaces upstream of the heat flux gauges and improve the accuracy of both the total and radiative heat flux computations. The success of this modeling approach increases confidence in the ability of state-of-the-art thermal and fluid modeling to accurately predict SRM internal environments, offers corrections to older methods, and supplies a tool for further studies of the dynamics of SRM interiors.

Martin, Heath T.↗

NASA NTRS2017

Incorporating Speech Recognition into a Natural User Interface

The Augmented/ Virtual Reality (AVR) Lab has been working to study the applicability of recent virtual and augmented reality hardware and software to KSC operations. This includes the Oculus Rift, HTC Vive, Microsoft HoloLens, and Unity game engine. My project in this lab is to integrate voice recognition and voice commands into an easy to modify system that can be added to an existing portion of a Natural User Interface (NUI). A NUI is an intuitive and simple to use interface incorporating visual, touch, and speech recognition. The inclusion of speech recognition capability will allow users to perform actions or make inquiries using only their voice. The simplicity of needing only to speak to control an on-screen object or enact some digital action means that any user can quickly become accustomed to using this system. Multiple programs were tested for use in a speech command and recognition system. Sphinx4 translates speech to text using a Hidden Markov Model (HMM) based Language Model, an Acoustic Model, and a word Dictionary running on Java. PocketSphinx had similar functionality to Sphinx4 but instead ran on C. However, neither of these programs were ideal as building a Java or C wrapper slowed performance. The most ideal speech recognition system tested was the Unity Engine Grammar Recognizer. A Context Free Grammar (CFG) structure is written in an XML file to specify the structure of phrases and words that will be recognized by Unity Grammar Recognizer. Using Speech Recognition Grammar Specification (SRGS) 1.0 makes modifying the recognized combinations of words and phrases very simple and quick to do. With SRGS 1.0, semantic information can also be added to the XML file, which allows for even more control over how spoken words and phrases are interpreted by Unity. Additionally, using a CFG with SRGS 1.0 produces a Finite State Machine (FSM) functionality limiting the potential for incorrectly heard words or phrases. The purpose of my project was to investigate options for a Speech Recognition System. To that end I attempted to integrate Sphinx4 into a user interface. Sphinx4 had great accuracy and is the only free program able to perform offline speech dictation. However it had a limited dictionary of words that could be recognized, single syllable words were almost impossible for it to hear, and since it ran on Java it could not be integrated into the Unity based NUI. PocketSphinx ran much faster than Sphinx4 which would've made it ideal as a plugin to the Unity NUI, unfortunately creating a C# wrapper for the C code made the program unusable with Unity due to the wrapper slowing code execution and class files becoming unreachable. Unity Grammar Recognizer is the ideal speech recognition interface, it is flexible in recognizing multiple variations of the same command. It is also the most accurate program in recognizing speech due to using an XML grammar to specify speech structure instead of relying solely on a Dictionary and Language model. The Unity Grammar Recognizer will be used with the NUI for these reasons as well as being written in C# which further simplifies the incorporation.

Chapa, Nicholas↗

NASA NTRS2017

Validation of a Solid Rocket Motor Internal Environment Model

Martin, Heath T.↗

NASA NTRS1998

A Hybrid SBR/MoM Technique for Analysis of Scattering from Small Protrusions on a Large Conducting Body

For analysis of large-scale electromagnetic scattering problems, high-frequency asymptotic methods are fast but approximate, whereas low-frequency numerical methods are accurate but slow. Neither can produce an efficient and accurate solution to scattering by large bodies containing small structures. A promising approach is to combine the best features of both types of methods to produce a hybrid technique that is sufficiently fast, reasonably accurate, and applicable to a class of unsolvable problems such as the scatterers mentioned above. There are two extremes for this type of hybridization. One is simply to superimpose solutions from asymptotic and numerical methods. While this approach is most widely used in practical applications, it neglects the interactions between the two solutions, which can be significant in many problems. The other extreme is to combine an asymptotic and a numerical method in an exact manner. In this approach, the effect of a large body is included by incorporating its diffraction into the Green's function in the integral equation for the small structures, which accounts for all interactions. While this approach is accurate, it is difficult to be implemented in a general-purpose computer code because of its complex nature. A more practical approach is to develop a technique that can include all significant interactions and neglect all trivial interactions. The resulting hybrid technique can produce sufficient accuracy and can be implemented in a general-purpose computer code. In this paper, we develop a technique that combines the shooting and- bouncing-ray (SBR) method and the method of moments (MoM) to solve for the scattering by large conducting bodies with small structures mounted on their surfaces.

Jin, J. M.↗

NASA NTRS1995

Josephson frequency meter for millimeter and submillimeter wavelengths

Frequency measurements of electromagnetic oscillations of millimeter and submillimeter wavebands with frequency growth due to a number of reasons become more and more difficult. First, these frequencies are considered to be cutoffs for semiconductor converting devices and one has to use optical measurement methods instead of traditional ones with frequency transfer. Second, resonance measurement methods are characterized by using relatively narrow bands and optical ones are limited in frequency and time resolution due to the limited range and velocity of movement of their mechanical elements as well as the efficiency of these optical techniques decrease with the increase of wavelength due to diffraction losses. That requires a priori information on the radiation frequency band of the source involved. Method of measuring frequency of harmonic microwave signals in millimeter and submillimeter wavebands based on the ac Josephson effect in superconducting contacts is devoid of all the above drawbacks. This approach offers a number of major advantages over the more traditional measurement methods, that is one based on frequency conversion, resonance and interferometric techniques. It can be characterized by high potential accuracy, wide range of frequencies measured, prompt measurement and the opportunity to obtain a panoramic display of the results as well as full automation of the measuring process.

Anischenko, S. E.↗

NASA NTRS1997

Image processing for improved eye-tracking accuracy

Video cameras provide a simple, noninvasive method for monitoring a subject's eye movements. An important concept is that of the resolution of the system, which is the smallest eye movement that can be reliably detected. While hardware systems are available that estimate direction of gaze in real-time from a video image of the pupil, such systems must limit image processing to attain real-time performance and are limited to a resolution of about 10 arc minutes. Two ways to improve resolution are discussed. The first is to improve the image processing algorithms that are used to derive an estimate. Off-line analysis of the data can improve resolution by at least one order of magnitude for images of the pupil. A second avenue by which to improve resolution is to increase the optical gain of the imaging setup (i.e., the amount of image motion produced by a given eye rotation). Ophthalmoscopic imaging of retinal blood vessels provides increased optical gain and improved immunity to small head movements but requires a highly sensitive camera. The large number of images involved in a typical experiment imposes great demands on the storage, handling, and processing of data. A major bottleneck had been the real-time digitization and storage of large amounts of video imagery, but recent developments in video compression hardware have made this problem tractable at a reasonable cost. Images of both the retina and the pupil can be analyzed successfully using a basic toolbox of image-processing routines (filtering, correlation, thresholding, etc.), which are, for the most part, well suited to implementation on vectorizing supercomputers.

NASA Discipline Space Human Factors↗

DOE OSTI2023

Joint velocity and density reconstruction of the Universe with nonlinear differentiable forward modeling

Reconstructing the initial conditions of the Universe from late-time observations has the potential to optimally extract cosmological information. Due to the high dimensionality of the parameter space, a differentiable forward model is needed for convergence, and recent advances have made it possible to perform reconstruction with nonlinear models based on galaxy (or halo) positions. In addition to positions, future surveys will provide measurements of galaxies' peculiar velocities through the kinematic Sunyaev-Zel'dovich effect (kSZ), type Ia supernovae, the fundamental plane relation, and the Tully-Fisher relation. Here we develop the formalism for including halo velocities, in addition to halo positions, to enhance the reconstruction of the initial conditions. We show that using velocity information can significantly improve the reconstruction accuracy compared to using only the halo density field. Here we study this improvement as a function of shot noise, velocity measurement noise, and angle to the line of sight. We also show how halo velocity data can be used to improve the reconstruction of the final nonlinear matter overdensity and velocity fields. We have built our pipeline into the differentiable Particle-Mesh FlowPM package, paving the way to perform field-level cosmological inference with joint velocity and density reconstruction. This is especially useful given the increased ability to measure peculiar velocities in the near future.

79 ASTRONOMY AND ASTROPHYSICS↗