Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “public release”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Photometric cross-calibration of the SDSS Stripe 82 Standard Stars catalogue with Gaia EDR3, and comparison with Pan-STARRS1, DES, CFIS, and GALEX catalogues

ABSTRACT We extend the SDSS Stripe 82 Standard Stars catalogue with post-2007 SDSS imaging data. This improved version lists averaged SDSS ugriz photometry for nearly a million stars brighter than r ∼ 22 mag. With 2–3 times more measurements per star, random errors are 1.4–1.7 times smaller than in the original catalogue, and about three times smaller than for individual SDSS runs. Random errors in the new catalogue are $\lesssim$0.01 mag for stars brighter than 20.0, 21.0, 21.0, 20.5, and 19.0 mag in u, g, r, i, and z-bands, respectively. We achieve this error threshold by using the Gaia Early Data Release 3 (EDR3) Gmag photometry to derive grey photometric zeropoint corrections, as functions of RA and Declination, for the SDSS catalogue, and use the Gaia BP–RP colour to derive corrections in the ugiz bands, relative to the r-band. The quality of the recalibrated photometry, tested against Pan-STARRS1, DES, CFIS, and GALEX surveys, indicates spatial variations of photometric zeropoints ≦ 0.01 mag (rms), with typical values of 3–7 millimag in the RA, and 1–2 millimag in the Declination directions, except for $\lesssim$6 millimag scatter in the u-band. We also report a few minor photometric problems with other surveys considered here, including a magnitude-dependent ∼0.01 mag bias between 16 ≤ GGaia ≤ 20 in the Gaia EDR3. Our new, publicly available catalogue offers robust calibration of ugriz photometry below 1 per cent level, and will be helpful during the commissioning of the Vera C. Rubin Observatory Legacy Survey of Space and Time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2010

Quality Control and Calibration of the Dual-Polarization Radar at Kwajalein, RMI

Weather radars, recording information about precipitation around the globe, will soon be significantly upgraded. Most of today s weather radars transmit and receive microwave energy with horizontal orientation only, but upgraded systems have the capability to send and receive both horizontally and vertically oriented waves. These enhanced "dual-polarimetric" (DP) radars peer into precipitation and provide information on the size, shape, phase (liquid / frozen), and concentration of the falling particles (termed hydrometeors). This information is valuable for improved rain rate estimates, and for providing data on the release and absorption of heat in the atmosphere from condensation and evaporation (phase changes). The heating profiles in the atmosphere influence global circulation, and are a vital component in studies of Earth s changing climate. However, to provide the most accurate interpretation of radar data, the radar must be properly calibrated and data must be quality controlled (cleaned) to remove non-precipitation artifacts; both of which are challenging tasks for today s weather radar. The DP capability maximizes performance of these procedures using properties of the observed precipitation. In a notable paper published in 2005, scientists from the Cooperative Institute for Mesoscale Meteorological Studies (CIMMS) at the University of Oklahoma developed a method to calibrate radars using statistically averaged DP measurements within light rain. An additional publication by one of the same scientists at the National Severe Storms Laboratory (NSSL) in Norman, Oklahoma introduced several techniques to perform quality control of radar data using DP measurements. Following their lead, the Topical Rainfall Measuring Mission (TRMM) Satellite Validation Office at NASA s Goddard Space Flight Center has fine-tuned these methods for specific application to the weather radar at Kwajalein Island in the Republic of the Marshall Islands, approximately 2100 miles southwest of Hawaii and 1400 miles east of Guam in the tropical North Pacific Ocean. This tropical oceanic location is important because the majority of rain, and therefore the majority of atmospheric heating, occurs in the tropics where limited ground-based radar data are available.

Marks, David A.↗
DOE OSTI2023

The Atacama Cosmology Telescope: map-based noise simulations for DR6

Abstract The increasing statistical power of cosmic microwave background (CMB) datasets requires a commensurate effort in understanding their noise properties. The noise in maps from ground-based instruments is dominated by large-scale correlations, which poses a modeling challenge. This paper develops novel models of the complex noise covariance structure in the Atacama Cosmology Telescope Data Release 6 (ACT DR6) maps. We first enumerate the noise properties that arise from the combination of the atmosphere and the ACT scan strategy. We then prescribe a class of Gaussian, map-based noise models, including a new wavelet-based approach that uses directional wavelet kernels for modeling correlated instrumental noise. The models are empirical, whose only inputs are a small number of independent realizations of the same region of sky. We evaluate the performance of these models against the ACT DR6 data by drawing ensembles of noise realizations. Applying these simulations to the ACT DR6 power spectrum pipeline reveals a ∼ 20% excess in the covariance matrix diagonal when compared to an analytic expression that assumes noise properties are uniquely described by their power spectrum. Along with our public code,mnms, this work establishes a necessary element in the science pipelines of both ACT DR6 and future ground-based CMB experiments such as the Simons Observatory (SO).

Astronomy & Astrophysics↗
NASA NTRS1986

BIOASPEN: System for technology development

The public version of ASPEN was installed in the VAX 11/750 computer. To examine the idea of BIOASPEN, a test example (the manufacture of acetone, butanol, and ethanol through a biological route) was chosen for simulation. Previous reports on the BIOASPEN project revealed the limitations of ASPEN in modeling this process. To overcome some of the difficulties, modules were written for the acid and enzyme hydrolyzers, the fermentor, and a sterilizer. Information required for these modules was obtained from the literature whenever possible. Additional support modules necessary for interfacing with ASPEN were also written. Some of ASPEN subroutines were themselves altered in order to ensure the correct running of the simulation program. After testing of these additions and charges was completed, the Acetone-Butanol-Ethanol (ABE) process was simulated. A release of ASPEN (which contained the Economic Subsystem) was obtained and installed. This subsection was tested and numerous charges were made in the FORTRAN code. Capital investment and operating cost studies were performed on the ABE process. Some alternatives in certain steps of the ABE simulation were investigated in order to elucidate their effects on the overall economics of the process.

Source record↗
NASA NTRS2023

The Atacama Cosmology Telescope: Map-Based Noise Simulations for DR6

The increasing statistical power of cosmic microwave background (CMB) datasets requires a commensurate effort in understanding their noise properties. The noise in maps from ground-based instruments is dominated by large-scale correlations, which poses a modeling challenge. This paper develops novel models of the complex noise covariance structure in the Atacama Cosmology Telescope Data Release 6 (ACT DR6) maps. We first enumerate the noise properties that arise from the combination of the atmosphere and the ACT scan strategy. We then prescribe a class of Gaussian, map-based noise models, including a new wavelet-based approach that uses directional wavelet kernels for modeling correlated instrumental noise. The models are empirical, whose only inputs are a small number of independent realizations of the same region of sky. We evaluate the performance of these models against the ACT DR6 data by drawing ensembles of noise realizations. Applying these simulations to the ACT DR6 power spectrum pipeline reveals a ≥ 20% excess in the covariance matrix diagonal when compared to an analytic expression that assumes noise properties are uniquely described by their power spectrum. Along with our public code, mnms, this work establishes a necessary element in the science pipelines of both ACT DR6 and future ground-based CMB experiments such as the Simons Observatory (SO).

CMBR experiments↗
DOE OSTI2020

West Valley Demonstration Project Annual Site Environmental Report (CY2019)

The report, prepared for the U.S. Department of Energy West Valley Demonstration Project office (DOE-WVDP), summarizes the environmental protection program at the WVDP for calendar year (CY) 2019. Monitoring and surveillance of the facilities used by the DOE are conducted to verify protection of public health and safety and the environment. The report is a key component of DOE’s effort to keep the public informed of environmental conditions at the WVDP. The quality assurance protocols applied to the environmental monitoring program ensure the validity and accuracy of the monitoring data. In addition to demonstrating compliance with environmental laws, regulations, and directives, evaluation of data collected in 2019 continued to indicate that WVDP activities pose no threat to public health or safety, or to the environment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1989

Product assurance technology for procuring reliable, radiation-hard, custom LSI/VLSI electronics

Advanced measurement methods using microelectronic test chips are described. These chips are intended to be used in acquiring the data needed to qualify Application Specific Integrated Circuits (ASIC's) for space use. Efforts were focused on developing the technology for obtaining custom IC's from CMOS/bulk silicon foundries. A series of test chips were developed: a parametric test strip, a fault chip, a set of reliability chips, and the CRRES (Combined Release and Radiation Effects Satellite) chip, a test circuit for monitoring space radiation effects. The technical accomplishments of the effort include: (1) development of a fault chip that contains a set of test structures used to evaluate the density of various process-induced defects; (2) development of new test structures and testing techniques for measuring gate-oxide capacitance, gate-overlap capacitance, and propagation delay; (3) development of a set of reliability chips that are used to evaluate failure mechanisms in CMOS/bulk: interconnect and contact electromigration and time-dependent dielectric breakdown; (4) development of MOSFET parameter extraction procedures for evaluating subthreshold characteristics; (5) evaluation of test chips and test strips on the second CRRES wafer run; (6) two dedicated fabrication runs for the CRRES chip flight parts; and (7) publication of two papers: one on the split-cross bridge resistor and another on asymmetrical SRAM (static random access memory) cells for single-event upset analysis.

Buehler, M. G.↗
NASA NTRS1998

Coordinated Studies of Magnetospheric/Ionospheric Coupling and Dynamics in the Diffuse Aurora

The results of the studies carried out under the grant are described in detail in the following publications: Atmospheric Response in Aurora experiment: Observations of E and F region neutral winds in a region of postmidnight diffuse aurora; Walterscheid, Modified geostrophy in the thermosphere, ARIA II neutral flywheel-driven field-aligned currents in the postmidnight sector of the auroral oval: A case study; Observations of unstable atmospheric shear layers in the lower E region in the post-midnight auroral oval; and Depletion of oxygen in aurora: Evidence for a local mechanism. The objective of the Atmospheric Response in Aurora (ARIA) experiment was to measure the response of the E-region neutral flow to substorm activity in the post-midnight sector of the auroral oval. To this end, neutral wind profiles were obtained from a series of four sets of rocket flights using the chemical release technique. The measurements covered conditions ranging from quiet to disturbed. A consistent feature of the observed winds in disturbed conditions is the presence of an E-region jet located between approximately 110 and 120 km altitude. The profiles presented here show that the neutral wind speeds near 110-120 km altitude increase and the hodographs become more elongated or linear in response to higher magnetic activity levels. The wind speeds decrease and the hodographs become more circular as the activity level decreases. The presence of a wind maximum implies shears both above and below. The observations consistently show larger shears below the peak and smaller shears above. In fact, the bottom-side shears during disturbed conditions have Richardson numbers close to or below the critical value of 0.25 suggesting that the flow is highly unstable in that height range. The instability is expected to produce waves, turbulence, and enhanced diffusivity.

Larsen, M. F.↗
DOE OSTI2022

Hydrogen Plus Other Alternative Fuels Risk Assessment Models (HyRAM+) Version 4.1 Technical Reference Manual

The HyRAM+ software toolkit provides a basis for conducting quantitative risk assessment and consequence modeling for hydrogen, methane, and propane systems. HyRAM+ is designed to facilitate the use of state-of-the-art models to conduct robust, repeatable assessments of safety, hazards, and risk. HyRAM+ integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, characterizing hazards (thermal effects from jet fires, overpressure effects from delayed ignition), and assessing impacts on people. HyRAM+ is developed at Sandia National Laboratories to support the development and revision of national and international codes and standards, and to provide developed models in a publicly-accessible toolkit usable by all stakeholders. This document provides a description of the methodology and models contained in HyRAM+ version 4.1. The two most significant changes for HyRAM+ version 4.1 from HyRAM+ version 4.0 are direct incorporation of unconfined overpressure into the QRA calculations and modification of the models for cryogenic liquid flow through an orifice. In QRA mode, the user no longer needs to input peak overpressure and impulse values that were calculated separately; rather, the unconfined overpressure is estimated for the given system inputs, leak size, and occupant location. The orifice flow model now solves for the maximum mass flux through the orifice at constant entropy while conserving energy, which does not require a direct speed of sound calculation. This does not affect the mass flow for all-gaseous releases; the method results in the same speed of sound for choked flow. However, this method does result in a higher (and more realistic) mass flow rate for a given leak size for liquid releases than was previously calculated.

08 HYDROGEN↗
NASA NTRS1972

Automated Microbial Metabolism Laboratory

The Automated Microbial Metabolism Laboratory (AMML) 1971-1972 program involved the investigation of three separate life detection schemes. The first was a continued further development of the labeled release experiment. The possibility of chamber reuse without inbetween sterilization, to provide comparative biochemical information was tested. Findings show that individual substrates or concentrations of antimetabolites may be sequentially added to a single test chamber. The second detection system which was investigated for possible inclusion in the AMML package of assays, was nitrogen fixation as detected by acetylene reduction. Thirdly, a series of preliminary steps were taken to investigate the feasibility of detecting biopolymers in soil. A strategy for the safe return to Earth of a Mars sample prior to manned landings on Mars is outlined. The program assumes that the probability of indigenous life on Mars is unity and then broadly presents the procedures for acquisition and analysis of the Mars sample in a manner to satisfy the scientific community and the public that adequate safeguards are being taken.

Source record↗
NASA NTRSDate not supplied

ROCKE-3D 2.0: An Updated General Circulation Model for Simulating the Climates of Rocky Planets

We present the second generation of ROCKE-3D (Resolving Orbital and Climate Keys of Earth and Extraterrestrial Environments with Dynamics), the generalized 3-dimensional General Circulation Model (GCM) for use in Solar System and exoplanetary simulations of rocky planet climates. ROCKE-3D version 2.0 is a descendant of GISS ModelE2.1, the flagship GCM of the NASA Goddard Institute for Space Studies (GISS) used in the most recent Intergovernmental Panel for Climate Change (IPCC) assessment. ROCKE-3D is a continuous effort to expand the capabilities of GISS ModelE to handle a broader range of atmospheric conditions, including different atmospheric planet sizes, gravities, pressures, rotation rates, more diverse chemistries and atmospheric compositions, diverse ocean and land distributions and topographies, and potential basic biosphere functions. We present in this release many more supported configurations which can serve as starting points to simulate terrestrial planets of interest. Two different radiation schemes are supported, the GISS radiation, valid for Earth-like planets, and SOCRATES, which is more generalized but requires more CPU resources. In addition, three different atmospheric compositions are supported, three ocean configurations (prescribed, q-flux, and dynamic), and two resolutions: the medium resolution (4 x 5 degrees in latitude x longitude) used in ROCKE-3D 1.0, and the fine resolution, which has double the resolution in the atmosphere and 4 times the resolution in the ocean. We quantify how the different component choices affect model results, and discuss strengths and limitations of using each component, together with how one can select which component to use. ROCKE-3D is publicly available and tutorial sessions are available for the community, greatly facilitating its use by any interested group.

ROCKE-3D↗
NASA NTRS1984

High resolution X- and gamma-ray spectroscopy of solar flares

A balloon-borne X- and gamma-ray instrument was developed, fabricated, and flown. This instrument has the highest energy resolution of any instrument flown to date for measurements of solar and cosmic X-ray and gamma-ray emission in the 13 to 600 keV energy range. The purpose of the solar measurements was to study electron acceleration and solar flare energy release processes. The cosmic observations were to search for cyclotron line features from neutron stars and for low energy gamma-ray lines from nucleosynthesis. The instrument consists of four 4 cm diameter, 1.3 cm thick, planar intrinsic germanium detectors cooled by liquid nitrogen and surrounded by CsI and NaI anti-coincidence scintillation crystals. A graded z collimator limited the field of view to 3 deg x 6 deg and a gondola pointing system provided 0.3 deg pointing accuracy. A total of four flights were made with this instrument. Additional funding was obtained from NSF for the last three flights, which had primarily solar objectives. A detailed instrument description is given. The main scientific results and the data analysis are discussed. Current work and indications for future work are summarized. A bibliography of publications resulting from this work is given.

Lin, R. P.↗
NASA NTRS2019

Gateway System Requirements

The Gateway Program (GW) System Requirements Document (SRD) is approved for the public domain to support NASA's Lunar Gateway Program. The main intent of these documents is to define top level functional and performance requirements for the systems that facilitate cooperative deep space exploration endeavors and execute lunar missions. The SRD defines NASA requirements for the procurement and development of the GW mission. The Gateway Program is a collaboration of US government, international partners and commercial providers. The Gateway SRD are expected to be used by all parties in development of the Gateway Program elements. For effective development and integration of the Gateway vehicle, all involved entities must use, and have awareness of, these high level program requirements to flow down to their respective developmental responsibilities so all Gateway elements will be operable as an entity. The Gateway SRD represents the requirements that are necessary for the Gateway mission. NASA has determined there is benefit to U.S. and foreign spacecraft developers to approve this information for the public domain because all the parties/participants need a common understanding of the requirements and the parameters under which they operate (size, shape, form fit and function). This will allow systems built by various nations and commercial entities to attach and function together properly and safely in the hostile environment of space.The Gateway SRD provides information regarding the current requirements for Gateway elements. Specifically, the Gateway SRD provide an overview of expected features and capabilities and requirements for safe integration of elements within the Gateway program. The SRD contains top-level functional and performance descriptions of the Gateway and definition of the interfaces limited to the scope necessary for integration purposes between Gateway elements. The documents do NOT contain detailed design information or any specifics of hardware or software implementation. The data approved for release does not include: manufacturing drawings, detailed interface control and design data, software code, detailed CAD models, structural or thermal models of the system, avionics or avionics box, board, or cable manufacturing information.

Adamek, Christopher↗
DOE OSTI2024

High-performance data management for whole slide image analysis in digital pathology

When dealing with giga-pixel digital pathology in whole-slide imaging, a notable proportion of data records holds relevance during each analysis operation. For instance, when deploying an image analysis algorithm on whole-slide images (WSI), the computational bottleneck often lies in the input-output (I/O) system. This is particularly notable as patch-level processing introduces a considerable I/O load onto the computer system. However, this data management process could be further paralleled, given the typical independence of patch-level image processes across different patches. This paper details our endeavors in tackling this data access challenge by implementing the Adaptable IO System version 2 (ADIOS2). Our focus has been constructing and releasing a digital pathology-centric pipeline using ADIOS2, which facilitates streamlined data management across WSIs. Additionally, we’ve developed strategies aimed at curtailing data retrieval times. The performance evaluation encompasses two key scenarios: (1) a pure CPU-based image analysis scenario (“CPU scenario”), and (2) a GPU-based deep learning framework scenario (“GPU scenario”). Our findings reveal noteworthy outcomes. Under the CPU scenario, ADIOS2 showcases an impressive two-fold speed-up compared to the brute-force approach. In the GPU scenario, its performance stands on par with the cutting-edge GPU I/O acceleration framework, NVIDIA Magnum IO GPU Direct Storage (GDS). From what we know, this appears to be among the initial instances, if any, of utilizing ADIOS2 within the field of digital pathology. The source code has been made publicly available at https://github.com/hrlblab/adios.

Wang, Xiao↗
NASA NTRS2024

Satellite-Based Tracking of Reservoir Operations for Flood Management During the 2018 Extreme Weather Event in Kerala, India

Uncoordinated management of hydropower dams during extreme and unexpected precipitation events in mountainous terrain can have disastrous consequences due to the competing nature of flood control and hydropower generation. Numerous cases of flooding events that have been exacerbated due to insufficient storage conditions in hydropower dams have been reported worldwide. There is a need for a scalable and publicly accessible monitoring framework that is capable of providing reliable, near-real time, and transparent reservoir operations data. A fully satellite-based framework is the most viable solution to build such capability. The Reservoir Assessment Tool (RAT 3.0), which utilizes high frequency remote sensing-based surface area and reservoir storage estimation alongside hydrological modelled inflow was applied here for the 2018 Kerala floods in India as a globally representative case for a mountainous river basin with high precipitation and hydropower dams. Application of satellite-based RAT 3.0 in monitoring the state of 19 reservoirs in Kerala during the flood event showed very promising results. In general, RAT 3.0, using satellite remote sensing, was found to be able to capture the temporal trend of the reservoir storage and pinpoint the sudden shift in filling or release decisions made by the dam operator. Inflow modelling in such regions was found to require careful calibration with identification of reservoirs that are heavily regulated being a critical aspect. The perennial high cloud cover in such regions necessitate and highlights the central role played by microwave and radar-based satellite sensors, such as the Surface Water and Ocean Topography (SWOT) mission, in tracking reservoir state. An operational version of RAT 3.0 for stakeholder agencies tailored for hydropower dams operating in high precipitation and mountainous environments is a real-world outcome of this study.

Sarath Suresh↗
NASA NTRS2017

Kepler: A Search for Terrestrial Planets. K2 Handbook

The Kepler spacecraft was repurposed for the K2 mission a year after the failure of the second of Kepler's four reaction wheels in 2013 May. The purpose of this document, the K2 Handbook (K2H), is to describe features of K2 operations, performance, data analysis, and archive products which are common to most K2 campaigns, but different in degree or kind from the corresponding features of the Kepler mission.The K2 Handbook is meant to be read with the following companion documents, which are all publicly available:1. Kepler Instrument Handbook (KSCI-19033) provides information about the design, performance and operational constraints of the instrument and an overview of the types of pixel data that are available.2. Kepler Data Processing Handbook (KSCI-19081) describes how pixels downloaded from the spacecraft are converted by the Kepler Data Processing Pipeline into the data products available at the MAST archive3. Kepler Archive Manual (KDMC-100008) describes the format and content of the data products and how to search for them.4. Kepler Data Characteristics Handbook (KSCI-19040) describes recurring non-astrophysical features of the Kepler data due to instrument signatures, spacecraft events or solar activity and explains how these characteristics are handled by the Kepler pipeline.5. The Ecliptic Plane Input Catalog describes the provenance of the positions and Kepler magnitudes used for target management and aperature photometry.6. K2 Data Release Notes (DRN) are on-line documents available on the K2 science website which describe the data inventory, instrumental signatures and events peculiar to individual observing campaigns.

K2↗
NASA NTRS2007

NASA's Potential Contributions for Remediation of Retention Ponds Using Solar Ultraviolet Radiation and Photocatalysis

This Candidate Solution uses NASA Earth science research on atmospheric ozone and aerosols data (1) to help improve the prediction capabilities of water runoff models that are used to estimate runoff pollution from retention ponds, and (2) to understand the pollutant removal contribution and potential of photocatalytically coated materials that could be used in these ponds. Models (the EPA's SWMM and the USGS SLAMM) exist that estimate the release of pollutants into the environment from storm-water-related retention pond runoff. UV irradiance data acquired from the satellite mission Aura and from the OMI Surface UV algorithm will be incorporated into these models to enhance their capabilities, not only by increasing the general understanding of retention pond function (both the efficacy and efficiency) but additionally by adding photocatalytic materials to these retention ponds, augmenting their performance. State and local officials who run pollution protection programs could then develop and implement photocatalytic technologies for water pollution control in retention ponds and use them in conjunction with existing runoff models. More effective decisions about water pollution protection programs could be made, the persistence and toxicity of waste generated could be minimized, and subsequently our natural water resources would be improved. This Candidate Solution is in alignment with the Water Management and Public Health National Applications.

Underwood, Lauren W.↗
DOE OSTI2023

New constraints on cosmological modified gravity theories from anisotropic three-point correlation functions of BOSS DR12 galaxies

Here we report a new test of modified gravity theories using the large-scale structure of the Universe. This paper is the first attempt to (1) apply a joint analysis of the anisotropic components of galaxy two- and three-point correlation functions (2 and 3PCFs) to actual galaxy data and (2) constrain the non-linear effects of degenerate higher-order scalar-tensor (DHOST) theories on cosmological scales. Applying this analysis to the Baryon Oscillation Spectroscopic Survey (BOSS) data release 12, we obtain the lower bounds of –1.655 < ξ t and –0.504 < ξ s at the $95{{\ \rm per\ cent}}$ confidence level on the parameters characterizing the time evolution of the tidal and shift terms of the second-order velocity field. These constraints are consistent with GR predictions of ξ t = 15/1144 and ξs = 0. Moreover, they represent a 35-fold and 20-fold improvement, respectively, over the joint analysis with only the isotropic 3PCF. We ensure the validity of our results by investigating various quantities, including theoretical models of the 3PCF, window function corrections, cumulative S/N, Fisher matrices, and statistical scattering effects of mock simulation data. We also find statistically significant discrepancies between the BOSS data and the Patchy mocks for the 3PCF measurement. Finally, we package all of our 3PCF analysis codes under the name hitomi and make them publicly available so that readers can reproduce all the results of this paper and easily apply them to ongoing future galaxy surveys.

79 ASTRONOMY AND ASTROPHYSICS↗