Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma rotation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Metal-Insulation REBCO Pancake Coil With Solder Surface Shunt: Testing and Modeling

Rare-earth barium copper oxide (REBCO) high-temperature superconducting (HTS) magnets can generate very high magnetic fields with superior engineering current density and robust mechanical integrity. The no-insulation (NI) winding technique, including its metal-insulation (MI) variant, enables “self-protection” against localized overheating through inter-turn current sharing, improving defect tolerance and allowing temporary current overloads. In REBCO pancake coils, the current-sharing path is predominantly confined to the edges of the REBCO tapes due to insulating buffer layers. Applying a surface shunt using solder can effectively enhance current sharing in NI/MI coils via the REBCO tape edges. Here, in this paper, we present both experimental and numerical research on the current distribution in surface-shunt metal-insulation (SSMI) REBCO pancake coils. We tested a stainless steel co-wound MI REBCO double-pancake coil, before and after applying a soldered surface shunt, in a saturated liquid nitrogen bath. The SSMI coil was modeled using the H-formulation and rotated anisotropic resistivity to study its dynamic behavior, including inter-turn current sharing and intra-turn screening currents. Benchmarked by experimental data, the numerical model is able to study the defect tolerance of the SSMI coil during energization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1991

The spin down of the radio pulsars: Braking index

Presently, the value of the retardation dP/dt is well known for most radio pulsars. It is negative for all cases except one and is of the order of 10(exp -15). That single case is when the pulsar, which is located in the star globular system, can have a considerable acceleration leading to the opposite sign of P'= dP/dt due to the Doppler effect. Careful measurements of the period, P, also allow one to determine the variation of this retardation with the course of time- P'' = d(exp 2)P/dt(exp 2). The results of these measurements are usually represented in the form of the dimensionless retardation index n = omega'' omega/omega(exp 2)= 2 - P''P/P(exp 2) (omega is the angular velocity). The data for 21 pulsars are given. The parameter, n, is strongly undetermined both in value and sign in all cases except for four pulsars. Changes of the rotation period, P, and the inclination angle, chi, the angle between the axes of rotation and the magnetic moment are caused by two processes: the regular retardation and nutation due to deviation from the strict spherical shape of the neutron star. Losses which are caused by the currents flowing in the magnetosphere of the neutron star and by being closed on the star surface are considered. Such losses are critical for the neutron star magnetosphere which is full of dense plasma. Since the radio emission is generated in the dense plasma of the polar magnetosphere, then practically all radio pulsars are retarded by the current mechanism. The formula for the braking index is presented along with other aspects of the investigation.

Beskin, V. S.↗
NASA NTRS2001

Magnetized or Unmagnetized: Ambiguity Persists Following Galileo's Encounters with Io in 1999 and 2000

Magnetometer data from Galileo's close encounters with Io do not establish absolutely either the existence or absence of an internal magnetic moment because the measurements were made in regions where plasma currents contribute sizable magnetic perturbations. Data from an additional encounter where the closest approaches were made beneath Io's south polar regions, were lost. The recent passes enhance our understanding of the interaction of Io and its flux tube with the torus, and narrows the limits on possible internal sources of magnetic fields. Simple field-draping arguments account for some aspects of the observed rotations. Analyses in terms of both a magnetized and an unmagnetized Io are considered. Data from the February 2000 pass disqualify a strongly magnetized Io (surface equatorial field stronger than the background field) but do not disqualify a weakly magnetized Io (surface equatorial field of the order of Ganymede's but smaller than the background field at Io). Models imply that if Io is magnetized, its magnetic moment is not absolutely antialigned with the rotation axis. The inferred tilt is consistent with contributions from an inductive field on the order of those observed at Europa and Callisto. The currents would flow in the outer mantle or aesthenosphere if an induced field is present. Wave perturbations differing on flux tubes that do or do not link directly to Io and its ionosphere suggest the following: (1) the latter flux tubes are almost stagnant in Io's frame; and (2) a unipolar inductor correctly models the currents linking Io to Jupiter's ionosphere.

Kivelson, Margaret G.↗
NASA NTRS2003

Dynamical Evolution of the Inner Heliosphere Approaching Solar Activity Maximum: Interpreting Ulysses Observations Using a Global MHD Model

In this study we describe a series of MHD simulations covering the time period from 12 January 1999 to 19 September 2001 (Carrington Rotation 1945 to 1980). This interval coincided with: (1) the Sun s approach toward solar maximum; and (2) Ulysses second descent to the southern polar regions, rapid latitude scan, and arrival into the northern polar regions. We focus on the evolution of several key parameters during this time, including the photospheric magnetic field, the computed coronal hole boundaries, the computed velocity profile near the Sun, and the plasma and magnetic field parameters at the location of Ulysses. The model results provide a global context for interpreting the often complex in situ measurements. We also present a heuristic explanation of stream dynamics to describe the morphology of interaction regions at solar maximum and contrast it with the picture that resulted from Ulysses first orbit, which occurred during more quiescent solar conditions. The simulation results described here are available at: http://sun.saic.com.

Riley, Pete↗
NASA NTRS2009

The Invariant Twist of Magnetic Fields in the Relativistic Jets of Active Galactic Nuclei

The origin of cosmic magnetic (B) fields remains an open question. It is generally believed that very weak primordial B fields are amplified by dynamo processes, but it appears unlikely that the amplification proceeds fast enough to account for the fields presently observed in galaxies and galaxy clusters. In an alternative scenario, cosmic B fields are generated near the inner edges of accretion disks in Active Galactic Nuclei (AGNs) by azimuthal electric currents due to the difference between the plasma electron and ion velocities that arises when the electrons are retarded by interactions with photons. While dynamo processes show no preference for the polarity of the (presumably random) seed field that they amplify, this alternative mechanism uniquely relates the polarity of the poloidal B field to the angular velocity of the accretion disk, resulting in a unique direction for the toroidal B field induced by disk rotation. Observations of the toroidal fields of 29 AGN jets revealed by parsec-scale Faraday rotation measurements show a clear asymmetry that is consistent with this model, with the probability that this asymmetry came about by chance being less than 1 %. This lends support to the hypothesis that the Universe is seeded by B fields that are generated in AGN via this mechanism

Contopoulos, Ioannis↗
DOE OSTI2021

L-H transition trigger physics in ITER-similar plasmas with applied n = 3 magnetic perturbations

The L–H transition power threshold PLH is observed to increase with applied n = 3 resonant magnetic perturbations (RMP) in ITER-similar-shape plasmas with balanced neutral beam torque injection in DIII-D. The increase is most pronounced with added electron–cyclotron heating: PLH increases with decreasing edge plasma collisionality as PLH/PLH-08 ~ (ν*)−0.5, where PLH-08 is the 2008 ITPA multi-machine power threshold scaling. This result raises concerns for H-mode access at low edge collisionality in ITER, where RMP may have to be applied before the L–H transition to safely suppress the first edge-localized mode. Non-axisymmetric modifications with RMP include a simultaneous reduction of the radial electric field (Er) well depth and E × B shear. This can be attributed to increasing edge toroidal co-current rotation, and is consistent with substantially increased local long-wavelength turbulence (measured via beam emission spectroscopy). At high RMP perturbation strength the edge electric field Er reverses sign locally (becomes positive), with changes in dominant turbulence modes. Edge magnetic stochasticity provides an attractive explanation of the observed modifications, and the observed changes in toroidal rotation and Er are consistent with a simple fluid model describing radial electron current flow along stochastic fieldlines. The observed collisionality dependence of the L-mode edge electric field with applied RMP is also qualitatively consistent with this model. Reflectometry data indicate a significant reduction of the normalized L-mode radial density gradient a/Ln at high RMP field with simultaneous increase in radial particle flux and electron thermal flux from power balance analysis. We conjecture that the increase of PLH with RMP results from the combined effects of reduced E × B flow shear (increasing turbulent transport levels) and toroidal/poloidal flow modulation due to edge stochasticity. Initial experiments indicate that non-resonant n = 3 magnetic perturbations lead only to relatively small changes in Er, E × B shear and fluctuation characteristics, and have less impact on the L–H transition power threshold. This motivates further exploration of the RMP spectrum dependence of PLH for possible mitigation of the observed threshold increase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1977

Detection of X-ray emission from 3C 120

X-rays from a region containing the nucleus of the type 1 Seyfert galaxy 3C 120 have been detected using the rotating modulation collimator on board the SAS-3 X-ray observatory. The error circle has a 95% error radius of 1.0 arcmin. The measured X-ray (2-10 keV) flux is 5.4 by 10 to the -11th power erg/s per sq cm. The corresponding luminosity is 2.3 by 10 to the 44th power erg/s for the source at 200 Mpc. Synchrotron-Compton and hot plasma models are discussed.

Schnopper, H. W.↗
NASA NTRS1992

Neptune's polar cusp region - Observations and magnetic field analysis

This paper confirms and extends the results of Szabo et al. (1991) (which demonstrated some similarities of the Neptune's polar cusp region to the earth's cusp), but uses a different approach requiring plasma and vector magnetic field quantities. In addition, various MHD properties of the cusp-magnetopause boundary, which separates the cusp from the magnetosheath allowing thermal anisotropy, are obtained, including the magnetopause (MP) normal, mass, and normal momentum flux, the boundary speed (and thickness), and their relationships. Results demonstrate that the MP velocity is composed of two components: a propagation speed and the other component consistent with the rotational motion of the magnetosphere.

Lepping, R. P.↗
NASA NTRS1992

Distinct ion population in the polar cusp: Possible signature of transient reconnection

Observations of ion energy dispersion, a common feature of the polar cusp, are discussed. Normally these dispersions show a continuous decrease in energy. However, they occasionally show steplike features in the dispersion. On 15 Oct. 1981, Dynamics Explorer 2 (DE 2) crossed the polar cusp at 1015 MLT and observed three distinct ion populations as the spacecraft moved poleward. These three populations had peak flux energy around 2.7 keV, 850 eV, and 360 eV. The first step coincided with a rotation of the flow; the flow being directed westward on the equatorward edge, poleward in the center, and eastward on the poleward edge. The second and third stems showed a flow directed principally poleward. Furthermore, the magnetic and electric perturbations in the first step are well fitted by an elongated Flux Transfer Event (FTE) footprint model. These results suggest that three consecutive FTE's have injected solar wind plasma into the ionosphere forming the polar cusp. The small latitudinal size of these FTE footprints (approximately 40 km) and their short recurrence rate (3 and 6 min) would be consistent with an intermittent reconnection taking place at the subsolar point in a short time scale.

Escoubet, C. P.↗
DOE OSTI2021

Electric field and turbulence in global Braginskii simulations across the ASDEX Upgrade edge and scrape-off layer

Turbulence simulations in diverted geometry across the edge and scrape-off layer (SOL) of ASDEX Upgrade are performed with the GRILLIX code (Stegmeir et al 2019 Phys. Plasmas 26 052517). The underlying global (full-f) drift-reduced Braginskii model allows to concurrently study the self-consistent dynamics of the turbulence and the background as well as the evolution of toroidal and zonal flows. Different contributions to the radial electric field are identified. The dominant contribution on closed flux surfaces comes from the ion pressure gradient, due to the diamagnetic drift in the curved magnetic field. Large deviations can be induced, in particular, by the polarization particle flux, leading to zonal flows. The latter are driven by small-scale eddies, but do not exhibit much impact on the overall transport which is driven by ballooning modes at larger scales. Ion viscosity is found to be important in damping poloidal rotation through adjusting of the parallel velocity profile, but not via direct vorticity damping. The zonal flow drive peaks at the separatrix, where a strong shear layer forms due to the sheath-induced counter-propagating SOL flow, allowing for the formation of a transport barrier. The temperature profile across the separatrix is determined by the competition between cross-field transport and outflow in the SOL, the latter being largely controlled by the parallel heat conductivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Narrow operator models of stellarator equilibria in Fourier Zernike basis

Numerical computation of the ideal magnetohydrodynamic (MHD) equilibrium magnetic field is at the base of stellarator optimisation and provides the starting point for solving more sophisticated partial differential equations like transport or turbulence models. Conventional approaches solve for a single stationary point of the ideal MHD equations, which is fully defined by three invariants and the numerical scheme employed by the solver. We present the first numerical approach that can solve for a continuous distribution of equilibria with fixed boundary and rotational transform, varying only the pressure invariant. This approach minimises the force residual by optimising parameters of multilayer perceptrons that map from a scalar pressure multiplier to the Fourier Zernike basis as implemented in the modern stellarator equilibrium solver DESC.

fusion plasma↗
DOE OSTI2022

Adatom-Driven Oxygen Intermixing during the Deposition of Oxide Thin Films by Molecular Beam Epitaxy

Thin film deposition from the vapor phase is a complex process involving adatom adsorption, movement, and incorporation into the growing film. While simulations have been able to capture key aspects of these processes to reproduce film morphology, these models typically ignore any subsurface diffusion that occurs. The results of these diffusion and intermixing processes are often observed experimentally, but cannot be explained by invoking bulk lattice diffusion at the deposition temperature. In this work, we present quantitative experimental data that reveals anion and cation intermixing over long length scales during the deposition of epitaxial Fe 2 O 3 and Cr 2 O 3 films and heterostructures by oxygen-plasma-assisted molecular beam epitaxy. We track this diffusion by incorporating well-defined tracer layers containing 18 O and/or 57 Fe, and measure their redistribution on the nanometer scale with atom probe tomography. Molecular dynamics simulations suggest potential intermixing events, which are then examined via nudged elastic band calculations. These reveal that adatoms on the film surface act to “pull up” subsurface O and Fe. Subsequent ring-like rotation mechanisms involving both adatom and subsurface anions then facilitate their mixing. A simple model incorporating these events qualitatively agrees with the experimental intermixing results. In addition to film deposition, these intermixing mechanisms may to be operant during other surface-mediated processes such as heterogeneous catalysis and corrosion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1994

A new containerless image furnace with electro-static positioning device

A new containerless image furnace with a microwave discharge plasma lamp and electrostatic positioning device was developed for the use of the microgravity experiment on the Japanese experimental module (JEM). The electrostatic positioning system was tested under the reduced gravity environment in the MU-300 aircraft. Solid specimens (maximum weight is 1.3 gr and 10 mm in diameter) and water drops (maximum weight is 0.11 gr and 6 mm in diameter) were successfully controlled under the 0.02G environment. Rotation control of the dielectric specimen was also possible by means of supplying a rotating electric field while the specimen is levitating. The measured rotation speed of the glass shell specimen (0.08 gr, 10 mm) was up to 110 rpm, when the rotating field frequency was 6Hz.

Yamawaki, Toshihiko↗
NASA NTRS1998

The Distant Tail at 200 R(sub E): Comparison Between Geotail Observations and the Results from a Global Magnetohydrodynamic Simulation

This paper reports a comparison between Geotail observations of plasmas and magnetic fields at 200 R(sub E) in the Earth's magnetotail with results from a time-dependent, global magnetohydrodynamic simulation of the interaction of the solar wind with the magnetosphere. The study focuses on observations from July 7, 1993, during which the Geotail spacecraft crossed the distant tail magnetospheric boundary several times while the interplanetary magnetic field (IMF) was predominantly northward and was marked by slow rotations of its clock angle. Simultaneous IMP 8 observations of solar wind ions and the IMF were used as driving input for the MHD simulation, and the resulting time series were compared directly with those from the Geotail spacecraft. The very good agreement found provided the basis for an investigation of the response of the distant tail associated with the clock angle of the IMF. Results from the simulation show that the stresses imposed by the draping of magnetosheath field lines and the asymmetric removal of magnetic flux tailward of the cusps altered considerably the shape of the distant tail as the solar wind discontinuities convected downstream of Earth. As a result, the cross section of the distant tail was considerably flattened along the direction perpendicular to the IMF clock angle, the direction of the neutral sheet following that of the IMF. The simulation also revealed that the combined action of magnetic reconnection and the slow rotation of the IMF clock angle led to a braiding of the distant tail's magnetic field lines along the axis of the tail, with the plane of the braid lying in the direction of the IMF.

Berchem, J.↗
NASA NTRS2000

The Fall 2000 and Fall 2001 SOHO-Ulysses Quadratures

SOHO-Ulysses quadrature occurs when the SOHO-Sun-Ulysses included angle is 90 degrees. It is only at such times that the same plasma leaving the Sun in the direction of Ulysses can first be remotely analyzed with SOHO instruments and then later be sampled in situ by Ulysses instruments. The quadratures in December 2000 and 2001 are of special significance because Ulysses will be near the south and north heliographic poles, respectively, and the solar cycle will be near sunspot maximum. Quadrature geometry is sometimes confusing and observations are influenced by solar rotation. The Fall 2000 and 2001 quadratures are more complex than usual because Ulysses is not in a true polar orbit and the orbital speed of Ulysses about the Sun is becoming comparable to the speed of SOHO about the Sun. In 2000 Ulysses will always be slightly behind the pole but will appear to hang over the pole for over two months because it is moving around the Sun in the same direction as SOHO. In 20001, Ulysses will be slightly in front of the pole so that its footpoint will be directly observable. Detailed plots will be shown of the relative positions of SOHO and Ulysses will their relative positions. In neither case is true quadrature actually achieved, but this works to the observers advantage in 2001.

Suess, S. T.↗
NASA NTRS2001

The Fall 2000 and Fall 2001 SOHO-Ulysses Quadratures

SOHO-Ulysses quadrature occurs when the SOHO-Sun-Ulysses included angle is 90 degrees. It is only at such times that the same plasma leaving the Sun in the direction of Ulysses can first be remotely analyzed with SOHO instruments and then later be sampled in situ by Ulysses instruments. The quadratures in December 2000 and 2001 are of special significance because Ulysses will be near the south and north heliographic poles, respectively, and the solar cycle will be near sunspot maximum. Quadrature geometry is sometimes confusing and observations are influenced by solar rotation. The Fall 2000 and 2001 quadratures are more complex than usual because Ulysses is not in a true polar orbit and the orbital speed of Ulysses about the Sun is becoming comparable to the speed of SOHO about the Sun. In 2000 Ulysses will always be slightly behind the pole but will appear to hang over the pole for over two months because it is moving around the Sun in the same direction as SOHO. In 2001 Ulysses will be slightly in front of the pole so that its footpoint will be directly observable. Detailed plots will be shown of the relative positions of SOHO and Ulysses will their relative positions. In neither case is true quadrature actually achieved, but this works to the observers advantage in 2001.

Suess, S. T.↗
DOE OSTI2026

Nonlinear magnetohydrodynamic modeling of ideal ballooning modes in high- β Wendelstein 7-X plasmas

We present nonlinear magnetohydrodynamic (MHD) simulations of high- β Wendelstein 7-X plasmas using the stellarator extension of the M3D- C 1 code, building on the recent work that shows benign saturation of ideal ballooning modes above the designed β limit in the standard configuration [Zhou et al., Phys. Rev. Lett. 133, 135102 (2024)]. First, we examine the results' sensitivity to the parallel thermal conductivity. It is found that while an increased parallel conductivity reduces the linear growth rate, the saturated pressure profile is barely affected. Second, we consider the dependence on the profile shape. It is shown that an equilibrium with a peaked pressure profile and lower β is subject to more significant change than a broad profile with higher β and a larger growth rate, suggesting that benign saturation, or nonlinear stability, is not guaranteed and not dictated by linear growth. Third, we study the influence of the magnetic configuration, with the equilibrium rotational transform varied by adjusting the planar coil current. With similar growth rates, similar magnitudes of profile change are found regardless of the presence of a low-order resonance, which implies that the saturation mechanism is not specific to a resonant or non-resonant mode. These results indicate that MHD stability should still be treated seriously in stellarator operation and design, for which nonlinear modeling using tools like M3D- C 1 can play an instrumental role.

Zhou, Yao [Shanghai Jiao Tong University (China)] ↗
DOE OSTI2021

Structural Analysis of the US ITER ECH Transmission Line System

The electron cyclotron heating (ECH) and current drive system is one of the main plasma heating systems for ITER. It uses high-power microwave beams with the power deposition location steerable across the plasma cross section. Microwave power is conveyed via transmission lines (TLs) that run from the gyrotrons in the radio frequency building through the assembly hall and tokamak building to the ECH launchers within the tokamak vacuum vessel. The ECH system includes a vast array of interconnected TL waveguides, in-line components, and support structures.Finite element (FE) modeling provides an essential means of simulating the system, applying loads and determining deflections, rotations, forces, moments, and stresses in order to evaluate various structural and microwave transmission performance metrics. A representative FE model of the overall ECH TL system is developed in ANSYS®. This top-level model defines the centerline of the waveguide system. Waveguide segments are represented by line elements (beams and pipes) with equivalent section properties, and support structures are represented by boundary conditions. A systematic approach is used to model each ECH component with lumped masses and structurally equivalent stiffness matrices or ANSYS superelements.The top-level TL FE model is used to evaluate the various loads (thermal, vacuum, seismic, etc.) and operating scenarios. The top-level model directly calculates stresses in the straight aluminum waveguide segments. The model provides the forces and moments acting on the in-line components for detailed submodel assessments. Displacement results from the top-level analysis feed into a separate microwave performance model to help determine operational efficiency. All TL performance and thermal-structural requirements are met, as specified by the applicable codes and standards, and successfully documented in numerous technical reports and demonstrated at the final design review.

Shanmugasundaram, Aravind↗