Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “package design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Gateway Cities Unplugged: (em)Powering Affordable Housing (Final Technical Report)

The Gateway Cities Unplugged: (em)Powering Affordable Housing (the “Project”) was launched to address a critical challenge in the U.S. building and energy sectors: enabling multifamily buildings especially those serving low and moderate‑income (LMI) communities to actively support grid modernization through Grid‑Interactive Efficient Buildings (GEB). Multifamily housing represents a large share of national building energy consumption, yet the sector faces persistent barriers to adopting advanced load flexibility technologies, including capital constraints, aging infrastructure, and limited access to demand‑side management tools. This Project sought to overcome those barriers by defining, evaluating, and designing commercially viable GEB technology packages for six representative multifamily properties across Massachusetts, Connecticut, and New York.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1972

Isotope Brayton electric power system for the 500 to 2500 watt range

An extensive study was conducted at the Lewis Research Center to evaluate an isotope Brayton electric power system for use in the 500 to 2500 W power range. Overall system simplicity was emphasized in order to reduce parasitic power losses and improve system reliability. Detailed parametric cycle analysis, conceptual component designs, and evaluation of system packaging were included. A single-loop system (gas) with six major components including one rotating unit was selected. Calculated net system efficiency varies from 23 to 28 percent over the power range.

Macosko, R. P.↗
NASA NTRS1971

Technology for low cost solid rocket boosters.

A review of low cost large solid rocket motors developed at the Lewis Research Center is given. An estimate is made of the total cost reduction obtainable by incorporating this new technology package into the rocket motor design. The propellant, case material, insulation, nozzle ablatives, and thrust vector control are discussed. The effect of the new technology on motor cost is calculated for a typical expandable 260-in. booster application. Included in the cost analysis is the influence of motor performance variations due to specific impulse and weight changes. It is found for this application that motor costs may be reduced by up to 30% and that the economic attractiveness of future large solid rocket motors will be improved when the new technology is implemented.

Ciepluch, C.↗
NASA NTRS1973

Small, high pressure ratio compressor: Aerodynamic and mechanical design

The Small, High-Pressure-Ratio Compressor Program was directed toward the analysis, design, and fabrication of a centrifugal compressor providing a 6:1 pressure ratio and an airflow rate of 2.0 pounds per second. The program consists of preliminary design, detailed areodynamic design, mechanical design, and mechanical acceptance tests. The preliminary design evaluate radial- and backward-curved blades, tandem bladed impellers, impeller-and diffuser-passage boundary-layer control, and vane, pipe, and multiple-stage diffusers. Based on this evaluation, a configuration was selected for detailed aerodynamic and mechanical design. Mechanical acceptance test was performed to demonstrate that mechanical design objectives of the research package were met.

Bryce, C. A.↗
NASA NTRS1972

Isotope Brayton electric power system for the 500 to 2500 watt range.

An extensive study was conducted at the Lewis Research Center to evaluate an isotope Brayton electric power system for use in the 500 to 2500 W power range. The study emphasized overall system simplicity in order to reduce parasitic power losses and improve system reliability. The study included detailed parametric cycle analysis, conceptual component designs, and evaluation of system packaging. The study has resulted in the selection of a single-loop system (gas) with six major components including one rotating unit. Calculated net system efficiency varies from 23 to 28% over the power range. The use of the Pu-238 heat source being developed for the Multi-Hundred-Watt Radioisotope Thermoelectric Generator program was assumed.

Macosko, R. P.↗
NASA NTRS1974

Breadboard development of a fluid infusion system

A functional breadboard of a zero gravity Intravenous Infusion System (IVI) is presented. Major components described are: (1) infusate pack pressurizers; (2) pump module; (3) infusion set; and (4) electronic control package. The IVI breadboard was designed to demonstrate the feasibility of using the parallel solenoid pump and spring powered infusate source pressurizers for the emergency infusion of various liquids in a zero gravity environment. The IVI was tested for flow rate and sensitivity to back pressure at the needle. Results are presented.

Thompson, R. W.↗
NASA NTRS1976

Thematic mapper critical elements breadboard program

A 40.6 cm bidirectional scan mirror assembly, a scan line corrector and a silicon photodiode array with integral preamplifier input stages were designed, fabricated, and tested to demonstrate performance consistent with requirements of the Hughes thematic mapper system. The measured performance met or exceeded the original design goals in all cases with the qualification that well defined and well understood deficiencies in the design of the photodiode array package will require the prescribed corrections before flight use.

Dale, C. H., Jr.↗
NASA NTRS1980

Photomask and pattern programs

Package of computer programs helps designers with layout and graphics of photomasks. Photomasks are specifically useful to applications involving fine reproducibility, repetition, and fabrication on planar surfaces of materials, items fabricated from photomasks include circuit boards, magnetic bubble devices and integrated optic circuits.

Kirschman, R. K.↗
NASA NTRS1979

A tactile-output paging communication system for the deaf-blind

A radio frequency paging communication system that has coded vibrotactile outputs suitable for use by deaf-blind people was developed. In concept, the system consists of a base station transmitting and receiving unit and many on-body transmitting and receiving units. The completed system has seven operating modes: fire alarm; time signal; repeated single character Morse code; manual Morse code; emergency aid request; operational status test; and message acknowledge. The on-body units can be addressed in three ways: all units; a group of units; or an individual unit. All the functions developed were integrated into a single package that can be worn on the user's wrist. The control portion of the on-body unit is implemented by a microcomputer. The microcomputer is packaged in a custom-designed hybrid circuit to reduce its physical size.

Baer, J. A.↗
NASA NTRS1981

A systems approach to mechanisms for a white light coronagraph X-ray XUV telescope

A combined instrument package containing nine mechanisms was designed and developed for the international solar polar mission (ISPM). This complement of instruments, commonly called the CXX, is the only imaging system on either the NASA or ESA spacecraft and consists of a white light coronagraph mounted parallel to a combined X-ray and extreme ultra-violet (XUV) telescope. Requirements for and implementation of mechanisms in the CXX instrument are discussed.

R Mastronardi↗
NASA NTRS1982

Cryogenic orbit transfer vehicle

Studies determined that shuttle optimized design, allowing the large space system and transfer vehicle in one shuttle flight, greatly reduces transportation costs and minimizes orbital operations. Careful attention to design resulted in efficient payload packaging. A minimum volume, high energy (liquid oxygen and liquid hydrogen) transfer vehicle is described that allows maximum volume for the payload in the orbiter cargo bay.

Ketchum, W. J.↗
NASA NTRS1985

To catch a comet: Technical overview of CAN DO G-324

The primary photographing of aboard STS 61-E. INTRODUCTION objective of the C.E. Williams Middle School Get Away Special "CAN DO" is the Comet Halley. As it is currently scheduled, G-324 will fly in March of 1986 The project will involve middle school students, grades 6 through 8, in the study and interpretation of astronomical photographs and techniques. -The-objectives of these studies are detailed in another paper to be presented at this symposium. 6-324 is contained in a 5 cubic foot G.A.S. Canister with an opening door and pyrex window for photography. It will be pressurized with one atmosphere of dry nitrogen. Three 35mm still cameras with 250 exposure film backs and different focal length lenses will be fired by a combination of automatic timer and an active comet detector. A lightweight 35mm movie camera will shoot single exposures at about 4 minute intervals to give an overlapping "skymap" of the mission. The fifth camera is a solid state television camera specially constructed for detection of the comet by the microprocessor. In addition to the photographic goals of CAN DO, the canister also contains a separate package of middle school student designed passive experiments. These-projects will be described in detail in the accompanying paper on educational goals.

Thomas J. O'Brien↗
NASA NTRS1991

Long Duration Exposure Facility (LDEF) low-temperature Heat Pipe Experiment Package (HEPP)

The flight test results are discussed obtained with the Heat Pipe Experiment Package (HEPP). The HEPP was designed to demonstrate the performance of an ethane constant conductance heat pipe (CCHP) and an ethane heat pipe diode in microgravity. These heat pipes have a nominal operating temperature range of 140 to 250 K. Also, included in the HEPP is a Phase Change Material (PCM) canister which provides temperature stability through melting and freezing of the n-heptane PCM. A comparison of pre-flight, flight, and post-flight thermal performance is also presented.

Mcintosh, Roy↗
NASA NTRS1991

Lightweight ceramic components for propulsion applications

It is demonstrated that two ceramic engine components of reduced weight can be efficiently produced and employed at higher combustion gas temperatures. The engine components, containing internal cooling and hydraulic passages, are fabricated in a process involving platelet technology, tape casting, and multilayer ceramic packaging techniques. Traditional metal platelet design techniques are used to fabricate components from ceramic tape which are then laminated and processed to densities of close to 100 percent. A methane cooled regenerator for an air turbo ramjet engine and a rocket engine bipropellant injector are fabricated from silicon nitride. The two components are tested under conditions similar to the pressurization, thrusts, and temperatures encountered in a combustion gas environment. The survivability and leak-free nature of the components demonstrate that more complex ceramic engine components can be fabricated using these techniques.

Franklin, J. E.↗
NASA NTRS1993

Feeder For Oxygen-Sensitive Powders

Powder feeder for oxygen-sensitive powders facilitates transfer of powder while protecting it against oxidation. Sight gauge enables continuous monitoring of level to which feeder filled with powder, as well as for visual monitoring of quality powder. Coupling mates with specially designed containers, in which powders packaged under vacuum or inert gas. Eliminating need for unncessary handling of powders and attendant risk of contamination by oxygen. Internal funnel unloads unused powder from feeder in vacuum or inert-gas atmosphere. Pressure gauge monitors pressure of inert backfill gas.

Woodford, William H.↗
NASA NTRS1994

Modeling ESA's TT/C systems

After a brief introduction on the need for simulation packages for the analysis and design of satellite communications systems, the software tool developed for the European Space Agency (ESA), its main objectives and the design choices made during the development are presented. A very concise description of the available communications and measurement block follows. The ESA standard Telemetry, Tracking and Command (TT&C) system simulator is then introduced along with a description of the ESA standard modulation and coding schemes. As an example, the simulation of the ranging system which is a non-standard communications block, is described in details. Several examples of TT&C simulations outputs are given and compared with measurement results or theoretical approximations, when available. Finally, future developments like the support of advanced modulation schemes and the dynamic satellite link simulation are presented.

Vassallo, Enrico↗
NASA NTRS1997

Analysis of Technology for Solid State Coherent Lidar

Over the past few years, considerable advances have been made in the areas of the diode-pumped, eye-safe, solid state lasers, wide bandwidth, semiconductor detectors operating in the near-infrared region. These advances have created new possibilities for the development of low-cost, reliable, and compact coherent lidar systems for measurements of atmospheric winds and aerosol backscattering from a space-based platform. The work performed by the UAH personnel concentrated on design and analyses of solid state pulsed coherent lidar systems capable of measuring atmospheric winds from space, and design and perform laboratory experiments and measurements in support of solid state laser radar remote sensing systems which are to be designed, deployed, and used by NASA to measure atmospheric processes and constituents. A lidar testbed system was designed and analyzed by considering the major space operational and environmental requirements, and its associated physical constraints. The lidar optical system includes a wedge scanner and the compact telescope designed by the UAH personnel. The other major optical components included in the design and analyses were: polarizing beam splitter, routing mirrors, wave plates, signal beam derotator, and lag angle compensator. The testbed lidar optical train was designed and analyzed, and different design options for mounting and packaging the lidar subsystems and components and support structure were investigated. All the optical components are to be mounted in a stress-free and stable manner to allow easy integration and alignment, and long term stability. This lidar system is also intended to be used for evaluating the performance of various lidar subsystems and components that are to be integrated into a flight unit and for demonstrating the integrity of the signal processing algorithms by performing actual atmospheric measurements from a ground station.

Amzajerdian, Farzin↗