Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optimization problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Guidance and control strategies for aerospace vehicles

The optimal control problem arising in coplanar orbital transfer employing aeroassist technology and the fuel-optimal control problem arising in orbital transfer vehicles employing aeroassist technology are addressed.

Naidu, Desineni S.↗

Large-Scale Numerical Simulations of Human Motion

This paper examines the feasibility of using massively-parallel and vector-processing supercomputers to solve large-scale optimal control problems for human movement. Specifically, we compare the computational expense of determining the optimal controls for the single support phase of walking using a conventional serial machine (a Silicon Graphics Personal Iris 4D25 workstation), a MIMD parallel machine (an Intel iPSC/860 comprising 128 processors), and a parallel-vector-processing machine (a Cray Y-MP 8/864). With the human body modeled as a 14 degree-of-freedom linkage actuated by 46 musculotendinous units, computation of the optimal controls for walking could take up to 3 months of CPU time on the Iris. Both the Cray Y-MP and the Intel iPSC/860 are able to reduce this time to practical levels. The optimal control solution for walking can be found with about 77 hours of CPU time on the Cray, and with about 88 hours of CPU time on the Intel. Although the overall speeds of the Cray and the Intel were found to be similar, the unique capabilities of each machine are best suited to different parts of the optimal control algorithm used. The Intel performed best in the calculation of the derivatives of the performance criterion and the constraints. In contrast, the Cray performed best during parameter optimization of the controls. These results suggest that the ideal computer architecture for solving very large-scale optimal control problems is a hybrid system in which a vector-processing machine is integrated into the communication network of a MIMD parallel machine.

Anderson, Frank C.↗

Optimal heading change with minimum energy loss for a hypersonic gliding vehicle

A three state model is presented for analyzing the problem of optimal changes in heading with minimum energy loss for a hypersonic gliding vehicle. A further model order reduction to a single state model is examined using singular perturbation theory. The optimal solution for the reduced problem defines an optimal altitude profile dependent on the current energy of the vehicle, and the corresponding optimal lift and bank angle. A separate boundary layer analysis, based on an expansion of the necessary conditions about the reduced solution, is used to account for altitude and flight path angle dynamics and to derive a guidance law in feedback form. The guidance law is evaluated for a hypothetical vehicle.

Calise, Anthony J.↗

Linearization of the boundary-layer equations of the minimum time-to-climb problem

Ardema (1974) has formally linearized the two-point boundary value problem arising from a general optimal control problem, and has reviewed the known stability properties of such a linear system. In the present paper, Ardema's results are applied to the minimum time-to-climb problem. The linearized zeroth-order boundary layer equations of the problem are derived and solved.

Ardema, M. D.↗

A stopping theoretic approach to minimal time detection of system parameter change

The problem of minimal time detection of abrupt parameter changes in linear stochastic systems considered. The problem is posed as an optimal stopping problem for the detection in change of the induced probability measure. Under the assumption of a prior distribution for the time of change (or disruption) a stopping rule is given which minimizes the average detection delay when there is knowledge of the new measure after the change. When the new induced measure is unknown, a stopping rule is given, based only on the noisy observations and is shown to be better than the a priori knowlege of the disruption time.

Mazumdar, Ravi R.↗

An Optimal Control Modification to Model-Reference Adaptive Control for Fast Adaptation

This paper presents a method that can achieve fast adaptation for a class of model-reference adaptive control. It is well-known that standard model-reference adaptive control exhibits high-gain control behaviors when a large adaptive gain is used to achieve fast adaptation in order to reduce tracking error rapidly. High gain control creates high-frequency oscillations that can excite unmodeled dynamics and can lead to instability. The fast adaptation approach is based on the minimization of the squares of the tracking error, which is formulated as an optimal control problem. The necessary condition of optimality is used to derive an adaptive law using the gradient method. This adaptive law is shown to result in uniform boundedness of the tracking error by means of the Lyapunov s direct method. Furthermore, this adaptive law allows a large adaptive gain to be used without causing undesired high-gain control effects. The method is shown to be more robust than standard model-reference adaptive control. Simulations demonstrate the effectiveness of the proposed method.

Nguyen, Nhan T.↗

Analysis of a turning point problem in flight trajectory optimization

The optimal control policy for the aeroglide portion of the minimum fuel, orbital plane change problem for maneuvering entry vehicles is reduced to the solution of a turning point problem for the bank angle control. For this problem a turning point occurs at the minimum altitude of the flight, when the flight path angle equals zero. The turning point separates the bank angle control into two outer solutions that are valid away from the turning point. In a neighborhood of the turning point, where the bank angle changes rapidly, an inner solution is developed and matched with the two outer solutions. An asymptotic analysis of the turning point problem is given, and an analytic example is provided to illustrate the construction of the bank angle control.

Gracey, C.↗

Control optimization of a lifting body entry problem by an improved and a modified method of perturbation function

A study of the solution problem of a complex entry optimization was studied. The problem was transformed into a two-point boundary value problem by using classical calculus of variation methods. Two perturbation methods were devised. These methods attempted to desensitize the contingency of the solution of this type of problem on the required initial co-state estimates. Also numerical results are presented for the optimal solution resulting from a number of different initial co-states estimates. The perturbation methods were compared. It is found that they are an improvement over existing methods.

Garcia, F., Jr.↗

SEEK: A FORTRAN optimization program using a feasible directions gradient search

This report describes the use of computer program 'SEEK' which works in conjunction with two user-written subroutines and an input data file to perform an optimization procedure on a user's problem. The optimization method uses a modified feasible directions gradient technique. SEEK is written in ANSI standard Fortran 77, has an object size of about 46K bytes, and can be used on a personal computer running DOS. This report describes the use of the program and discusses the optimizing method. The program use is illustrated with four example problems: a bushing design, a helical coil spring design, a gear mesh design, and a two-parameter Weibull life-reliability curve fit.

Savage, M.↗

Optimal Low Thrust Orbit Transfers for Space Telescope Refueling at SEL2

The James Webb Space Telescope (JWST), a ten billion-dollar infrared telescope with a 6.5m primary mirror to be launched in 2021, is designed to operate in a Halo orbit around the second Sun-Earth Lagrange point (SEL2) for five to ten years. At that point fuel for station keeping and attitude maneuvers will run out. Refueling missions to JWST, as well as to similar space telescope missions proposed for SEL2, could greatly enhance the “science-per-dollar” value and promote a more sustainable use of space assets. In this paper, we present a novel approach to designing fuel optimal trajectories that will allow the refueling spacecraft to arrive at the SEL2 Halo orbit with maximum final mass (i.e. fuel payload). The low thrust optimal control problem is formulated using an indirect optimization method, leading to a two-point boundary value problem with a bang-bang control structure. We make use of a hyperbolic tangent smoothing technique for performing continuation on the thrust magnitude to reduce the sharpness of the control switches in early iterations and, thus, promote convergence. The problem is posed and solved in the circular restricted three-body problem. In this dynamical system, invariant manifolds exist that can be utilized to reduce fuel consumption. The here presented methodology to this challenging and important problem in astrodynamics demonstrates a significant potential for low-cost refueling mission design.

Woollands, Robyn↗

Optimal Reconfiguration of Tetrahedral Formations

The problem of minimum-fuel formation reconfiguration for the Magnetospheric Multi-Scale (MMS) mission is studied. This reconfiguration trajectory optimization problem can be posed as a nonlinear optimal control problem. In this research, this optimal control problem is solved using a spectral collocation method called the Gauss pseudospectral method. The objective of this research is to provide highly accurate minimum-fuel solutions to the MMS formation reconfiguration problem and to gain insight into the underlying structure of fuel-optimal trajectories.

Huntington, Geoffrey↗

Development of an adaptive hp-version finite element method for computational optimal control

In this research effort, the usefulness of hp-version finite elements and adaptive solution-refinement techniques in generating numerical solutions to optimal control problems has been investigated. Under NAG-939, a general FORTRAN code was developed which approximated solutions to optimal control problems with control constraints and state constraints. Within that methodology, to get high-order accuracy in solutions, the finite element mesh would have to be refined repeatedly through bisection of the entire mesh in a given phase. In the current research effort, the order of the shape functions in each element has been made a variable, giving more flexibility in error reduction and smoothing. Similarly, individual elements can each be subdivided into many pieces, depending on the local error indicator, while other parts of the mesh remain coarsely discretized. The problem remains to reduce and smooth the error while still keeping computational effort reasonable enough to calculate time histories in a short enough time for on-board applications.

Hodges, Dewey H.↗

Automating the Process of Optimization in Spacecraft Design

Spacecraft design optimization is a difficult problem, due to the complexity of optimization cost surfaces, and human expertise in optimization that is necessary in order to achieve good results. In this paper, we propose the use of a set of generic, metaheuristic optimization algorithms (e.g., generic algorithms, simulated annealing), which is configured for a particular optimization problem by an adaptive problem solver based on artificial intelligence and machine learning techniques. We describe work in progress on OASIS, a system for adaptive problem solving based on these principles.

optimization↗