Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Physics of magnetospheric emission in soft gamma-ray repeaters

Soft gamma-ray repeaters appear to be relatively young, strongly magnetized neutron stars embedded within plerions. The observationally inferred presence of teragauss fields and energetic outflows in these sources provides some support for a model in which the bursts results from crustal disturbances that load and energize the magnetosphere with the ensuing generation of sheared Alfven waves. We here determine accurately the structure of the particle efflux and calculate the spectrum of the resultant radiation, incorporating the key effects due to mildly relativistic magnetic bremsstrahlung, a frequency-dependent photospheric radius and angle-dependent boosting of the intensity for emitting elements at different inclinations. We find that the average photospheric radius during the transient event is approximately 4 stellar radii and that the particles attain a Lorentz factor approximately 13.2 by the time the gas becomes optically thin. The calculated spectrum is a weighted integral over the boosted intensity determined from the physical conditions (i.e., magnetic field, particle density, and temperature) at the photospheric radius corresponding to the relevant frequency. When applied to SGR 1806-20, this procedure yields a distance D approximately equals 10 kpc to this source, which appears to be consistent with the range (approximately 8-17 kpc) inferred from its apparent coincidence with the supernova remnant G10.0-0.3.

Melia, Fulvio↗

Gamma Ray Bursts-Afterglows and Counterparts

Several breakthrough discoveries were made last year of x-ray, optical and radio afterglows and counterparts to gamma-ray bursts, and a redshift has been associated with at least one of these. These discoveries were made possible by the fast, accurate gamma-ray burst locations of the BeppoSAX satellite. It is now generally believed that the burst sources are at cosmological distances and that they represent the most powerful explosions in the Universe. These observations also open new possibilities for the study of early star formation, the physics of extreme conditions and perhaps even cosmology. This session will concentrate on recent x-ray, optical and radio afterglow observations of gamma-ray bursts, associated redshift measurements, and counterpart observations. Several review and theory talks will also be presented, along with a summary of the astrophysical implications of the observations. There will be additional poster contributions on observations of gamma-ray burst source locations at wavelengths other than gamma rays. Posters are also solicited that describe new observational capabilities for rapid follow-up observations of gamma-ray bursts.

Fishman, Gerald J↗

Proceedings of the Space Shuttle Sortie Workshop. Volume 2: Working group reports

Details are presented on the mission planning progress in each of the working paper reports. The general topics covered are the following: space technology; materials processing and space manufacturing; communications and navigation; earth and ocean physics; oceanography; earth resources and surface environmental quality; meteorology and atmospheric environmental quality; life sciences; atmospheric and space physics; solar physics; high energy cosmic rays; X-ray and gamma ray astronomy; ultraviolet-optical astronomy; planetary astronomy; and infrared astronomy.

Source record↗

Theoretical and experimental investigations of superconductivity. Amorphous semiconductors, superconductivity and magnetism

The research activities from 1 March 1963 to 28 February 1973 are summarized. Major lectures are listed along with publications on superconductivity, superfluidity, electronic structures and Fermi surfaces of metals, optical spectra of solids, electronic structure of insulators and semiconductors, theory of magnetic metals, physics of surfaces, structures of metals, and molecular physics.

Cohen, M. H.↗

Stress corrosion in titanium alloys and other metallic materials

Multiple physical and chemical techniques including mass spectroscopy, atomic absorption spectroscopy, gas chromatography, electron microscopy, optical microscopy, electronic spectroscopy for chemical analysis (ESCA), infrared spectroscopy, nuclear magnetic resonance (NMR), X-ray analysis, conductivity, and isotopic labeling were used in investigating the atomic interactions between organic environments and titanium and titanium oxide surfaces. Key anhydrous environments studied included alcohols, which contain hydrogen; carbon tetrachloride, which does not contain hydrogen; and mixtures of alcohols and halocarbons. Effects of dissolved salts in alcohols were also studied. This program emphasized experiments designed to delineate the conditions necessary rather than sufficient for initiation processes and for propagation processes in Ti SCC.

Harkins, C. G.↗

An Atmospheric Cloud Physics Laboratory for the Space Laboratory

Results of research and engineering analyses to date show that it is feasible to develop and fly on the first Spacelab mission a multipurpose laboratory in which experiments can be performed on the microphysical processes in atmospheric clouds. The paper presents a series of tables on the Atmospheric Cloud Physics Laboratory, with attention given to experiment classes, the preliminary equipment list (particle generators, optical and imaging devices, particle detectors and characterizers, etc.), initial equipment (scientific equipment subsystems and flight support subsystems), and scientific functional requirements (the expansion chamber, the continuous flow diffusion chamber, the static diffusion chamber, the humidifier, and particle generators).

Smith, R.↗

X-ray spectra of the Crab pulsar and nebula

The spectrum of the Crab pulsar was measued from 2 to 50 keV as a function of pulse phase and a progressive hardening and subsequent softening of the spectrum across the pulse was found. The fraction of the pulsed flux which exhibits spectral variability is 0.14 and is concentrated solely in the region between the two peaks. A model is suggested in which the pulsed X-ray emission from the Crab pulsar consists of two components: one which has no spectral dependence with pulse phase and which is physically related to the double peaked gama ray pulse and, perhaps, the radio and optical pulses; and another component which exhibits spectral variability with pulse phase is confined to and comprises the interpeak emission, and which is only seen at X-ray energies. These results and studies of the binary X-ray pulsar Hercules X-1 suggest a phenomonological similarity. If the spectrally varying component in the Crab pulsar arises from a hot, magnetized plasma near the neutron star surface then higher energy spectral observations of this phase region might reveal spectral features which can be used to determine the surface field strength.

Pravdo, S. H.↗

Intagliated phosphor screen image tube project

The production and evaluation of a magnetic focus image tube for astronomical photography that has an intagliated phosphor screen is described. The modulation transfer function of such a tube was measured by electronic means and by film tests, and the results compared with tubes of more conventional construction. The physical properties of the image tube and film combination, the analytical model of the optical interface, and the salient features of the intagliated screen tube are described. The results of electronic MTF tests of the intagliated image tube and of the densitometry of the tube and film test samples are presented. It is concluded that the intagliated screen is a help, but that the thickness of the photographic film is also important.

Hertzel, R. J.↗

Observations of optical lightning emissions from above thunderstorms using U-2 aircraft

In order to determine how to achieve orders of magnitude improvement in spatial and temporal resolution and in sensitivity of satellite lightning sensors, better quantitative measurements of the characteristics of the optical emissions from lightning as observed from above tops of thunderclouds are required. A number of sensors have been developed and integrated into an instrument package and flown aboard a NASA U-2 aircraft. The objectives have been to acquire optical lightning data needed for designing the lightning mapper sensor, and to study lightning physics and the correlation of lightning activity with storm characteristics. The instrumentation and observations of the program are reviewed and their significance for future research is discussed.

Christian, H. J.↗

Feed System Design Considerations for Large Space Antenna Systems. Part 2: Single Aperture with Overlapping Feeds

Contiguous multiple beams are used to make use of the set of frequency bands at different beams at different geographical locations and achieve the most efficient use of precious frequency allocation. This is feasible only if the interference among cochannel beams is below some acceptable level, by carrier/interference (C/I) ratio. Individual beam patterns of very low sidelobes, which in turn necessitates narrow feed are required. A physically realizable solution to this problem entails either more than one reflector, more complicated optics, or breaking of each feed into a cluster of smaller elements, some of which would then be shared by adjacent beams. The latter, however, requires a complicated beamforming network (BFN) for the proper feeding of the elements. The feedpacking problem is not unique to reflector antennas and exists in lens type antennas as well. The BFN and associated problems are present in the phased array antennas and on a much larger scale. Poor scan capabilities are associated with reflector systems. The scan properties of offset fed reflector systems can be improved by choosing a very large focal length to parent reflector diameter ((F/Dp) ratio, which requires a longer boom to support the feed. In the case of reflectors with cluster feed arrangements, the scan capability for smaller F/Dp ratios is improved by proper adjustment of cluster element excitations. Such a system seems to be appropriate for up to 10 beamwidths scan. For a larger number of beams, systems with wider scan capabilities, such as phased arrays or phased array/reflector combinations, become more appealing.

Jamnejad, V.↗

The nature of cometary grains from remote sensing

Physical property data of cometary grains are derived primarily from thermal emission measurement and optical scattering. Results consistent with the properties of micrometeorites collected in the stratosphere are described.

Hanner, M. S.↗

Evaluation and Analysis of the ANSI X3T9.5 (FDDI) PMD and Proposed SMF-PMD as Influenced by Various Fiber Link Characteristics

The purpose of this project is to evaluate the operational parameters of the Kennedy Space Center (KSC) fiber optic cable plant. The evaluation is based on the Fiber Distributed Data Interface (FDDI) Physical Medium Dependent (PMD) and Single Mode Fiber (SMF) PMD standards. From the KSC fiber profile, it would be necessary to develop the modifications needed in existing FDDI PMD and proposed SMF-PMD standards to provide for FDDI implementation and operation at KSC. This analysis should examine the major factors that influence the operating conditions of the KSC fiber plant. These factors would include, but are not limited to the number and type of connectors, attenuation and dispersion characteristics of the fiber, non-standard fiber sizes, modal bandwidth, and many other relevant or significant fiber plant characteristics that effect FDDI characteristics. This analysis is needed to gain a better understanding of overall impact that each of these factors have on FDDI performance at KSC.

Wernicki, M. Chris↗

High angular resolution measurements of Algol

Algol (Beta Per) is an extensively studied triple system which includes an eclipsing pair. Using long baseline optical interferometry, the AB-C system of Algol has had its geometric and physical parameters determined with higher resolution and accuracy than obtained with other techniques. The orbital elements are determined, without the use of spectroscopic data, as follows: P = 680.05 d +/- 0.06 d, T = JD 2,446,931.4 +/- 1.5, e = 0.225 +/- 0.005, a-double-prime = 94.61 +/- 0.22 mas, i = 83.98 deg +/- 0.09 deg, omega = 310.29 deg +/- 0.08 deg, and Omega = 312.26 deg +/- 0.13 deg. The distance to Algol is determined as 28.2 +/- 0.8 pc. The absolute magnitude of the C component is 2.86 +/- 0.46 mag, and its mass is 1.50 +/- 0.11 solar mass. The observational results indicate the difference of the inclinations between the eclipsing pair and the wide pair to be within 1.6 deg. For the first time, the eclipsing of the close pair was observed interferometrically, and the results compare well with those from photometry.

Pan, Xiaopei↗

An April 1991 outburst from 4U0115+63 observed by BATSE

4U0115+63 is a recurrent transient X-ray pulsar in a moderately eccentric orbit with a Be star companion, V635 Cas. Many outbursts from this system have been reported over the past twenty years; yet despite the apparent relation between optical outbursts from the companion star and subsequent X-ray transient events, the physical mechanism for the mass transfer in the system remains unclear. In this paper, we present the preliminary results of analysis of observations made using BATSE during the 1991 April outburst from this system. This outburst does not fit the pattern of three year recurrence intervals previously suggested by Whitlock, Roussel-Dupre and Priedhorsky (1989). The orbital elements of the system have been updated and do not support the claim of Tamura et al., (1992) that apsidal motion was detected in this system based on the 1990 Ginga outburst.

Cominsky, Lynn↗

Optical measurements in rocket engine liquid sprays

The performance of liquid propellant rocket engines is dependent upon many elements of the entire system. One of the most fundamental and most critical is the performance of the injector elements. Their characterization is an important part of the development of combustion devices. Optical measurements within these environments have proven to be invaluable tools in quantifying the physical environment of two phase flows. The effort reported herein involves the measurement of drop velocity, drop size, and most importantly mass flux using Phase-Doppler Particle Anemometry within a spray generated by a single swirl injector element operating in atmospheric pressure conditions. The mass flux has been determined and validated by mechanical patternation methods and by profile integration of the mass flux.

Feikema, Douglas A.↗

Transport methods and interactions for space radiations

This report presents a brief history leading to the involvement of the Langley Research Center of the National Aeronautics and Space Administration (NASA) in space-radiation physics and protection. Indeed, a relatively complete summary of technical capability as of the summer of 1990 is given. The Boltzmann equations for coupled ionic and neutronic fields are presented and inversion techniques for the Boltzmann operator are discussed. Errors generated by the straight ahead approximation are derived and are shown to be negligible for most problems of space-radiation protection. A decoupling of projectile propagation from the target fields greatly simplifies the Boltzmann equations and allows an analytic solution of the target fragment transport. Analytic and numerical methods of solving the projectile transport equations are discussed. The nuclear physics underlying the coefficients in the Boltzmann equation is discussed. A coupled-channel optical model is found as a consequence of the loose binding of nuclear matter and closure of the nuclear states in high-energy reactions. Transport solutions with the developed data base are used with laboratory experiments to validate both the transport code and the data base. Numerical benchmarks and comparison with Monte Carlo calculations are also used for code validation.

Wilson, John W.↗

Theoretical model of HZE particle fragmentation by hydrogen targets

The fragmenting of high energy, heavy ions (HZE particles) by hydrogen targets is an important, physical process in several areas of space radiation research. In this work quantum mechanical optical model methods for estimating cross sections for HZE particle fragmentation by hydrogen targets are presented. The cross sections are calculated using a modified abrasion-ablation collision formalism adapted from a nucleus-nucleus collision model. Elemental and isotopic production cross sections are estimated and compared with reported measurements for the breakup of neon, sulphur, and iron, nuclei at incident energies between 400 and 910 Mev/nucleon. Good agreement between theory and experiment is obtained.

Townsend, L.W.↗

2 kWe Solar Dynamic Ground Test Demonstration Project: Executive Summary - Volume 1

The Solar Dynamic Ground Test Demonstration (SDGTD) successfully demonstrated a solar-powered closed Brayton cycle system in a relevant space thermal environment. In addition to meeting technical requirements the project was completed 4 months ahead of schedule and under budget. The following conclusions can be supported: 1. The component technology for solar dynamic closed Brayton cycle technology has clearly been demonstrated. 2. The thermal, optical, control, and electrical integration aspects of systems integration have also been successfully demonstrated. Physical integration aspects were not attempted as these tend to be driven primarily by mission-specific requirements. 3. System efficiency of greater than 15 percent (all losses fully accounted for) was demonstrated using equipment and designs which were not optimized. Some preexisting hardware was used to minimize cost and schedule. 4. Power generation of 2 kWe. 5. A NASA/industry team was developed that successfully worked together to accomplish project goals. The material presented in this report will show that the technology necessary to design and fabricate solar dynamic electrical power systems for space has been successfully developed and demonstrated. The data will further show that achieved results compare well with pretest predictions. The next step in the development of solar dynamic space power will be a flight test.

Alexander, Dennis↗