Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “operating conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Microbial communities for valorizing biomass using the carboxylate platform to produce volatile fatty acids: A review

The carboxylate platform employs a diverse microbial consortium of anaerobes in which the methanogens are inhibited. Nearly all biomass components are digested to a mixture of C1-C8 monocarboxylic acids and their corresponding salts. The methane-arrested anaerobic digestion proceeds readily without needing to sterilize biomass or equipment. It accepts a wide range of feedstocks (e.g., agricultural residues, municipal solid waste, sewage sludge, animal manure, food waste, algae, and energy crops), and produces high product yields. This review highlights several important aspects of the platform, including its thermodynamic underpinnings, influences of inoculum source and operating conditions on product formation, and downstream chemical processes that convert the carboxylates to hydrocarbon fuels and oxygenated chemicals. Furthermore, this review further establishes the carboxylate platform as a viable and economical route to industrial biomass utilization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Coupled methane and NO x conversion on Pt + Pd/Al 2 O 3 monolith: Conversion enhancement through feed modulation and Mn 0.5 Fe 2.5 O 4 spinel addition

The performance of a dual-layer Pt-Pd/Al 2 O 3 washcoated monolith promoted by an Al 2 O 3 -supported Mn 0.5 Fe 2.5 O 4 spinel base layer was evaluated with the objective to develop a catalyst with a lower loading of Platinum group metal (PGM) for stoichiometric natural gas vehicle (NGV) emission control. Flow reactor results show that a combination of a lean/rich modulated feed and spinel addition gives enhanced methane and NO conversions compared to a steady-state feed having the same overall composition. Washcoated catalysts – PGM-only, spinel-only, PGM + spinel – were compared over a wide range of operating conditions. The results show a decrease in the methane conversion light-off temperature of up to 85 °C for an application-relevant feed (CH 4 + NO + H 2 + CO + O 2 + H 2 O + CO 2 ) while a moderate 40 °C decrease was observed for a simple feed (CH 4 + O 2 + H 2 O + CO 2 ). In the absence of spinel the modulation enhancement is negatively impacted at high methane conversion (> 80 %). The data show that the O 2 storage and release property of the spinel is needed to fully exploit the modulation enhancement. The mechanism responsible for the enhancement is linked to suppression of O 2 inhibition on the methane oxidation rate near the stoichiometric neutral point (λ = 1). Sufficiently fast cycling achieves a balance between a metallic and oxidic precious metal crystallites favorable for methane activation. The addition of spinel moves this balance closer to the λ = 1 feed, enabling a high oxidation efficiency with lower byproduct NH 3 selectivity. Enhancement in the NO conversion follows the methane conversion due to an easier NO reduction under the slightly rich of stoichiometric feed. Comparison of the PGM + spinel catalysts to PGM-only catalysts shows that the addition of spinel in combination with modulation can achieve the same activity with a lower PGM loading.

03 NATURAL GAS↗
DOE OSTI2026

Rational design of heterogeneous single-site catalysts via surface organometallic chemistry

Single-site heterogeneous catalysts offer an attractive route to unite the molecular precision of homogeneous catalysis with the durability and practical advantages of solids. Surface organometallic chemistry (SOMC) provides a particularly powerful strategy for this purpose by grafting molecular precursors onto tailored surfaces and converting support functionalities into ligand environments for isolated metal centers. As a result, SOMC brings the language and logic of coordination chemistry to heterogeneous catalysis, where the support becomes an integral part of the active site coordination sphere. This Review surveys recent progress in the rational design of SOMC-derived single-site catalysts, with emphasis on synthetic routes, post synthetic transformations, and the deliberate tuning of catalytic behavior through metal-support interactions. Discussions are made on how support identity, hydroxyl topology, acidity, and redox activity shape the geometry, electronic structure, and oxidation state of supported metal sites, as well as how these factors determine activity, selectivity, and stability. We also examine a central limitation of these systems: despite their molecularly informed design, supported single sites often exist as structurally distributed ensembles rather than uniform species, particularly on amorphous supports. This site heterogeneity, along with catalyst dynamics under operating conditions, remains a major barrier to definitive structure-activity relationships. Therefore, emerging approaches that combine advanced characterization, first-principles modeling, ensemble kinetics, and machine learning to resolve active-site structure and guide catalyst development are highlighted. Together, these advances position SOMC as a versatile coordination chemistry framework for the predictive design of heterogeneous catalysts with well-defined molecularly tailored active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Validation and application of a multiphase CFD model for hydrodynamics, temperature field and RTD simulation in a pilot-scale biomass pyrolysis vapor phase upgrading reactor

Accurate prediction of transport phenomena is critical for VPU reactor design, optimization, and scale-up. The current study focused on the validation and application of a multiphase CFD model within an open-source code MFiX for hydrodynamics, temperature field, and residence time distribution (RTD) simulation in a non-reacting circulating fluidized bed riser for biomass pyrolysis vapor phase upgrading (VPU). First, an Eulerian-Eulerian approach three-dimensional CFD model was employed to simulate the pilot-scale VPU riser on the supercomputer Joule. Excellent quantitative agreement between experimental and simulated results was achieved for pressure drops and temperature field in a range of operating conditions. Then the validated multiphase CFD model was applied to predict gas and solid residence time distributions (RTDs) since prediction and analysis of RTD is an important tool to study the complex multiphase flow behavior and mixing inside chemical reactors. The predictions show that solid mean residence time is 3.5 times the gas residence time; the solid RTD is more sensitive to the process gas flow rate than the solids circulation rate.

09 BIOMASS FUELS↗
DOE OSTI2020

Investigating biomass composition and size effects on fast pyrolysis using global sensitivity analysis and CFD simulations

It is notoriously difficult to build an accurate universal model for biomass pyrolysis due to its sensitivity to a wide number of critical material attributes such as chemical species and physical sizes. In this work, a biomass pyrolysis kinetics with 32 heterogeneous reactions and 59 species was implemented in an open-source multiphase computational fluid dynamics (CFD) software MFiX and validated against two different experimental pyrolysis data sets that provided detailed data describing chemical component yields. The reaction scheme was then used to build a surrogate model and assess the sensitivity of pyrolysis yields to feedstock compositions. The sensitivity analysis determined that the yield of bio-char showed a strong positive sensitivity to the carbon-rich lignin and tannin pseudo-species in the reaction scheme while the bio-oil and bio-gas were correlated to oxygen-rich lignin pseudo-species. The reaction scheme was then integrated into a coarse-grained discrete element model to simulate fast pyrolysis in a bubbling fluidized bed over a range of feedstock particle sizes. The reactor simulations showed further sensitivity to particle size and hydrodynamics. Notably, particles under 0.5 mm have small heat transfer limitations but left the reactor before completely converting and thus reduced the bio-oil yield. Results from this study can be used to guide future development of highly accurate models for fast pyrolysis reactors with a variety of feedstock properties and operating conditions.

09 BIOMASS FUELS↗
DOE OSTI2021

Electrochemically-assisted removal of cadmium ions by redox active Cu-based metal-organic framework

An electrochemically-assisted wastewater treatment using Faradaic materials offers a promising technique for the selective removal of hazardous substances. Here, we demonstrate the reversible capture and release of cadmium ions in aqueous solutions, using a redox-active metal-organic framework (MOF) electrode. As-synthesized copper-based MOF (Cu-MOF-74; copper 2,5-dihydroxyterephthalate) is a highly attractive candidate for Faradaic electrosorption due to its large surface area, water stability, and redox-active metal nodes. Our work demonstrates the reversible capture and release of Cd 2+ ions assisted by the electrochemical redox reaction of Cu 2+ /Cu + within the MOF structure. Combined material characterization and electrosorption tests were carried out to determine the operational conditions for maximizing adsorption capacity, energy efficiency, and material stability, thus leading to excellent electrosorption (>100 mg g -1 ) and regeneration efficiency (>90%). This study demonstrates the feasibility of leveraging MOFs containing redox-active metal nodes for the selective separation of toxic cations, and paves the way for promising future applications of these 3-D porous structures for wastewater treatment and environmental remediation.

42 ENGINEERING↗
DOE OSTI2021

Process intensification of CO 2 capture by low-aqueous solvent

Low-energy solvent-based CO 2 absorption processes have drawn attention as a next-generation post-combustion CO 2 capture technology to reduce CO2 emissions from fossil fuel– or biomass-fired power generation and industrial flue gas streams. A low-aqueous (or water-lean) solvent process may substantially reduce the thermal energy consumption for solvent regeneration. Low-aqueous solvent–based processes are thermally sensitive, requiring a delicate temperature control within the absorber because of the fast exothermic amine-CO 2 reaction and low heat capacity organic diluent. This reaction may result in heat accumulation in a packed absorption column and undesirable CO 2 desorption occurring as the solvent moves through the column, reducing the solvent’s CO 2 capture efficiency if its temperature is not controlled. Using a 3D printed intensified packing device, enhanced heat and mass transfer were demonstrated in an amine-CO 2 scrubbing process using low-aqueous solvent. The multifunctional intensified device facilitates contact of the reactive solvent and gas phases in a single stage and heat removal by a cooling fluid flowing through channels in the interior of the corrugated plates of the device. These functionalities led to effective thermal management along the column via intrastage cooling and significant improvement in CO 2 uptake under a wide range of operating conditions. Intrastage cooling effectively reduced the solvent average temperature along the column by ~10 °C and, as a result, the solvent’s capture efficiency improved by up to 25%.

42 ENGINEERING↗
DOE OSTI2022

Detailed biomass fast pyrolysis kinetics integrated to computational fluid dynamic (CFD) and discrete element modeling framework: Predicting product yields at the bench-scale

Fast pyrolysis is an intricate process due to the variability and anisotropy of lignocellulosic biomass and the complicated chemistry and physics during conversion in a bubbling fluidized bed reactor (BFBR). The complexity of biomass fast pyrolysis lends itself well to computational fluid dynamics (CFD) and discrete element (DEM) analysis, which promises to reduce experimental time and its associated cost. This work investigated switchgrass fast pyrolysis simulated by computational fluid dynamics coupled with a discrete element method to track individual reacting biomass particles throughout a bench-scale BFBR reactor. We accounted for the fast pyrolysis chemistry through a comprehensive reaction scheme with secondary cracking reactions. We performed a three-step reduction for secondary cracking reactions to convert the full cracking scheme into a reduced scheme easily incorporated into our model. We assessed the impact of operational conditions on the steady-state yields of liquid bio-oil, non-condensable gases (NCG), at 550 °C over a range of fluidization numbers (2 – 6 Umf), reported as a ratio to the minimum fluidization velocity (Umf). At steady-state, the volatile bio-oil yield had a range of 49.3–50.4 wt%. Levoglucosan was the primary volatile component present with 21 wt% of the bio-oil while water was the second largest with 20 wt%. The reduction of the secondary reaction schemes did not appreciably affect the overall yields of switchgrass pyrolysis compared to the full secondary scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Physical model and experimental validation of a high temperature proton exchange membrane electrochemical hydrogen pump cell for efficient single-stage extraction of low concentration hydrogen gas

There is interest in valorization of existing natural gas infrastructure to facilitate the co-transportation of hydrogen via blending of hydrogen gas initially at limited concentrations of 1–20 vol% H2 and to subsequently extract hydrogen at fuel cell quality standards (SAE J2719/ISO14687-2). High temperature proton exchange membrane electrochemical hydrogen pump (HT-PEM EHP) based on phosphoric acid doped polybenzimidazole (PA-PBI) exhibits good performance at elevated temperatures (>120 °C), which provides desirable tolerance to non-methane natural gas constituents that are problematic for lower temperature based EHP. To better understand the suitability of the HT-PEM EHP for such gas separation processes, a two-dimensional model of EHP based on PA-PBI was developed. The model is validated for several relevant operating conditions and across cells with differing amounts of phosphoric acid content in the electrodes. Operando micro x-ray computed tomography (CT) imaging of an HT-PEM EHP was used to further validate physical parameters and assumptions of the model. The impacts of pressure, relative humidity of the anode feed, and concentration of feed gases on separation performance are investigated. This study shows that a specific energy of separation of 5.1 kWh/kg H2 at a hydrogen recovery factor (HRF) of 50 vol% can be achieved in a single stage with the EHP, producing fuel cell quality hydrogen purity of 99.99 vol% H2 from a 2 vol% H2/CH4 feed blend, while pressurizing the product H2 at a pressure ratio of 1.3 relative to feed pressure.

Stansberry, John M↗
DOE OSTI2026

Adsorption-based direct air capture using hierarchical porous composites prepared via confined-space crystallization

Capturing CO₂ at trace concentration remains a critical challenge in sustainable carbon management via adsorption, as conventional adsorbents suffer from low CO₂ selectivity, poor moisture tolerance, and energy-intensive regeneration requirements. Here, we report a hierarchical Ba²⁺-exchanged silicoaluminophosphate (Ba²⁺-CSAPO-34) composite synthesized via confined-space crystallization within an activated carbon matrix. Comprehensive characterization revealed a confined nucleation mechanism and the successful incorporation of Ba²⁺ active sites within the SAPO-34 framework, achieved via a two-step liquid ion-exchange protocol. The core-shell architecture combines the selective CO₂ binding of Ba²⁺-functionalized SAPO-34 with the hydrophobic protection of the carbon shell. Fixed-bed adsorption tests demonstrated strong CO₂ binding (at 500-2500 ppm), no roll-up, and effective suppression of water affinity, while maintaining high selectivity even at 90% relative humidity. A phenomenological adsorption model, validated against dynamic breakthrough data, accurately predicted dynamic adsorption behavior under real-world operating conditions, enabling rational process design for direct air capture (DAC) and closed-loop life support systems. Furthermore, these results establish Ba²⁺-CSAPO-34 as a scalable, moisture-resistant adsorbent that addresses key limitations in trace CO₂ capture, advancing practical implementation of carbon removal technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Evolution of thermo-mechanical properties of concrete with calcium aluminate cement and special aggregates for energy storage

Highlights: • CAC Concrete with stable aggregates is suitable for high temperatures with cycles. • Concrete suffered performance changes after the first thermal cycle (dehydration). • Subsequent thermal cycles showed stabilization and slight performance decreases. With the ever-expanding presence of solar energy, the design of cost-efficient heat energy storage systems is becoming increasingly relevant. Concrete is a potential solid material for these systems but raises questions of its response at high temperatures in operating conditions. This work studies concrete designed with calcium aluminate cement and three types of aggregates that are stable at high temperatures. The designed concrete mixes were exposed to thermal cycles (290–550 °C), and their thermal fatigue response was evaluated with mechanical, cracking, thermal, and microstructural analyses at room temperature after heat cycles. The obtained results show that the main changes are mostly produced after the first thermal cycle and are stabilized during successive thermal cycles, with only a slight decrease in the thermo-mechanical properties. The results showed stabilization of cracking, crack widths between 10 and 80 μm, reduction of compressive strength, around 50–65%, and reduction of the thermal conductivity by 30%.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Comparative analysis of temperature dependent properties of commercial nuclear fuel pellet and surrogates undergoing cracking: A review

A variety of normal and accident scenarios can generate thermal stresses enough to cause cracking in light water reactor (LWR) fuel. To better understand this behavior, cracking experiments have been carried out to induce thermal gradients in fuel pellets via induction heating and direct resistance heating. In this study, Ceria (CeO 2 ) and yttria stabilized zirconia (YSZ) pellets were chosen as a surrogate fuel material for uranium dioxide (UO 2 ). Induction heating was done using copper coils and molybdenum susceptors which heated the surrogates to a threshold temperature that is sufficiently high for the fuel material to conduct current. Thereafter, direct resistance heating was achieved by passing current through the specimen using a DC power supply to introduce volumetric heating to replicate reactor operating conditions. Simultaneous real-time dual imaging of the ceria pellet surface has been designed using optical and infra-red camera system to capture images of cracks and full-field temperature gradients on pellet. It was observed that YSZ pellets need a much higher voltage-current for volumetric heating and do not exhibit the cracking pattern as ceria and UO 2 , hence YSZ was ruled out for further consideration. Ceria was found to be an appropriate surrogate for UO 2 . Furthermore, the experimental set up and test conditions demand the need to primarily understand the thermo-physical, mechanical and optical properties of UO 2 and the surrogates. Thus, it is essential to have an in-depth knowledge about the various temperature dependent properties of UO 2 and CeO 2 for establishing a comparative analysis between the surrogate and UO 2 for conducting experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stable perovskite-fluorite dual-phase composites synthesized by one-pot solid-state reactive sintering for protonic ceramic fuel cells

We report that this work synthesized a series of oxide composites with nominal compositions of BaCe 05 Zr 0.4 Y 0.1 O 3-δ (BCZY)-Ce 0.5 Y 0.5 O 2-δ (YDC) based on the BCZY/YDC molar ratios of 0.5:1, 1:1, 2:1, and 4:1 (BCZY-YDC-0.5–1, BCZY-YDC-1-1, BCZY-YDC-2-1, and BCZY-YDC-4-1) using a one-pot solid state reactive sintering (SSRS) method. The X-ray diffraction (XRD) patterns and refinement proved that the one-pot SSRS at 1450 °C for 12 h could achieve the perovskite-fluorite dual-phase composites (DPCs) with the desired structure compositions. The scanning electron microscopy (SEM) images showed that the two DPCs of BCZY-YDC-1-1 and BCZY-YDC-2-1 formed excellent percolation for perovskite and fluorite phases. The conductivity measurement by electrochemical impedance spectroscopy (EIS) and the transference number measurement by the electromotive force (EMF) test proved that changing the BCZY/YDC molar ratio and operating condition could adjust the DPC's conduction property to make them suitable for electrolytes and electrode scaffolds for protonic ceramic fuel cells (PCFCs). The long-term conductivity testing and the crystal structure analysis after EMF testing under versatile conditions indicated that the DPCs of BCZY-YDC-2-1 and BCZY-YDC-1-1 were durable PCFC component materials. The PCFC button cells with the as-discovered BCZY-YDC-2-1 and BCZY-YDC-1-1 as an electrolyte and an anode scaffold, respectively, and the reported Ba–Ce–Fe–Co–O perovskite-perovskite composite as a cathode showed promising performance under H 2 /air gradient.

08 HYDROGEN↗
DOE OSTI2022

Development, characterization, and modeling of a high-performance Ru/B2CA catalyst for ammonia synthesis

This paper documents the development and performance of a nano-phase Ru catalyst on a (BaO) x (CaO) y (Al 2 O 3 ) support. Extensive screening of the support’s ternary composition shows the best stoichiometry is (BaO) 2 (CaO)(Al 2 O 3 ), denoted B2CA. The paper first describes catalyst preparation and characterization. The paper reports a detailed 12-step reaction mechanism that represents ammonia synthesis over wide ranges of temperature, pressure, space velocity, and feed composition. Additionally, the mechanism is developed and validated using results of packed-bed experiments. The elementary reaction pathways consider surface adsorbates, including catalyst-poisoning behaviors. The rate expressions include important coverage-dependent activation barriers. Machine learning models assist interpretation of the catalyst-support interactions. The detailed chemistry is much more predictive than is possible with global representations (N 2 + 3H 2 ⇌ 2NH 3 ). The validated models can be applied to assist optimizing reactor design and operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modeling gas release from a Bingham plastic slurry and deconvoluting measured data

Physics-based models for predicting the off-gassing characteristics of agitated slurries are presented. This approach decomposes the system into two separate but coupled slurry and headspace models. The physics driving bubble transport through the slurry and gas mixing within the headspace are discussed. An analytical expression for predicting the time evolution of the headspace concentration using first principles theory is also presented. Predictions from the numerical models, as well as expectations from the analytical solution, both agree with measured off gassing data for two different experimental operating conditions. After benchmarking the numerical model predictions against experimental data, the model was used to make predictions for gas release from a full-scale vessel and to perform sensitivity analyses to examine the sensitivity of gas release to parameters such as yield stress, consistency index, slurry density, bubble size, bubble concentration, and impeller speed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Experimental measurements of gas-particle flows in large-scale strippers

Measurements of gas–solid particle flow in a large-scale stripper unit are reported. The experiments target industrial (pilot) scale measurements of gas-particle flow that can be used to validate numerical methods for modeling multiphase flows, such as computational fluid dynamics coupled to the discrete element method (CFD-DEM). Specifically, experiments were performed with Geldart Group B (533 µm) glass beads in a stripper unit. In general, previous CFD-DEM validation datasets were performed in benchtop experimental systems and limited to O(10 5 ) particles. Here, in this work, the number of particles in the isolated section of the stripper is O(10 7 ) for all tests. Measurements are reported for a ~2 m tall section of the ~1 m diameter stripper. Radial mass flux profiles measured at five axial positions and three axial pressure drop measurements are reported for six operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Kinetics of simultaneous hydrodesulfurization and hydrodenitrogenation reactions using CoMoP/Al 2 O 3 and NiMoP/Al 2 O 3

Hydrodesulfurization (HDS) is a key reaction to achieve diesel production at the specified low sulfur levels and is highly affected by a competing reaction involving nitrogen removal through hydrodenitrogenation (HDN). This work evaluated kinetic parameters of simultaneous reactions of HDS of dibenzothiophene (DBT) and HDN of quinoline (Q) using CoMoP/Al 2 O 3 and NiMoP/Al 2 O 3 catalysts under operational conditions that allow a wide range of reagent conversions. Estimated parameters were evaluated using rigorous statistical 2 analysis. Good fits for the evaluated experimental data were provided by both power-law and Langmuir-Hinshelwood models. Further, turnover frequency values highlight adsorption and competition effects between nitrogen-containing compounds and sulfur-containing compounds. NiMoP catalyst showed higher hydrogenating power than CoMoP, with larger absolute value of the estimated adsorption enthalpy (-120 kJ.mol -1 for NiMoP and -75 kJ.mol -1 for CoMoP), suggesting strong adsorption of nitrogen compounds. A catalyst with more hydrogenating power is also more capable of performing both HDN and HDS reactions simultaneously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Simulations of biomass compression-screw feeding using a compressible non-Newtonian constitutive model

There is global interest in the conversion of biomass into sustainable low-carbon-footprint fuels and chemicals as an alternative to non-renewable fossil feedstocks. Feeding biomass solids into pressurized reactors is one of the key steps in biomass conversion. Predicting mechanical failure and energy requirements for this step helps avoid upstream processing bottlenecks and enables efficient operation of a biorefinery. Here, in this work, we developed a predictive computational model for biomass screw feeders that capture the highly viscous, non-Newtonian and compressible behavior of biomass slurries. Biomass compressible behavior is formulated by an equation of state and the non-Newtonian rheology is represented by a density-dependent viscosity model. Experimental data from two compression screw-feeder systems are presented as a validation for our model. Our model successfully predicted the location of the compressed biomass “plug”, biomass flow rate, and the required torque at different operating conditions for the experimental conditions studied in this work.

09 BIOMASS FUELS↗