Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Review of additive manufacturing and densification techniques for the net- and near net-shaping of geometrically complex silicon nitride components

Silicon nitride (Si 3 N 4 ) is an advantageous material due its unique combination of mechanical, thermal, chemical, and electrical properties both at ambient and elevated temperatures. Because of these properties there are a wide range of applications for Si 3 N 4 components. Applications include heat exchangers, environmental barrier coatings, osteointegration scaffolds, radomes, and integrated circuitry. Furthermore, such applications often require geometric complexity for efficient and/or effective operation. However, traditional ceramics processing methods such as hot-pressing or die extrusion are typically limited to simple axis-symmetric shapes. With the advent of additive manufacturing, there has been significant advancement into the forming of geometrically complex Si 3 N 4 components. This review documents additive manufacturing advancements that have demonstrated, or are capable of, fabricating Si 3 N 4 components with complex geometry.

36 MATERIALS SCIENCE↗

Reactive flash sintering of TiZrN and TiAlN ternary metal nitrides

Here, this study demonstrated the reactive flash sintering (RFS) for two powder mixtures: TiN-ZrN (both conducting) and AlN-TiN (TiN conducting but AlN insulating), targeting ternary metal nitrides (TMN) of Ti 0.5 Zr 0.5 N and Ti 0.5 Al 0.5 N, respectively. A constant volage and pressure (e.g., 8 V DC, ∼15 MPa) at room temperature triggered the flash (current density up to 27 A/mm 2 ) without pre-heating, and the entire RFS process finished in a few minutes. For TiZrN, the flash was instantaneous whereas for TiAlN, there was a long incubation before the flash followed by a quick and dramatic flash. Both conventional ex situ XRD and in situ synchrotron study had been carried out. They showed a uniform Ti 0.57 Zr 0.43 N solution formed in RFS and persisted upon cooling, while (Ti, Al) N solid solution formed at high temperature was not stable and likely went through a very quick phase separation in the cooling process. The final products from RFS had been characterized using SEM/EDS for microstructure. Both TiZrN and TiAlN were dense. Distribution of Ti, Zr, and N was uniform for TiZrN; for TiAlN, Ti and N distribution was uniform, while association of Al with oxygen was observed. TGA-DSC revealed the onset oxidation temperature for TiZrN was comparable to TiN and ZrN, while it was higher by ∼200 °C for TiAlN, likely due to the formation of Al 2 O 3 . In terms of mechanical properties such as hardness or fracture toughness, forming a single-phase solid solution (like TiZrN) does not offer obvious benefits. while large grain size from RFS seemed to be unfavorable. Future optimization of RFS condition and in-depth study by both experiments and simulation are needed to fully understand the composition-processing-structure-property relationships for such TMN from the reactive flash sintering process.

Flash Sintering↗

Environmental application of chlorine-doped graphitic carbon nitride: Continuous solar-driven photocatalytic production of hydrogen peroxide

Solar-driven photocatalytic generation of H 2 O 2 over metal-free catalysts is a sustainable approach for value-added chemical production. Here, we synthesized chlorine-doped graphitic carbon nitride (Cl-doped g-C 3 N 4 ) through a solvothermal method to effectively produce H 2 O 2 with a rate of 1.19 ± 0.06 µM min –1 under visible light irradiation, which was improved by 104 times compared to pristine g-C 3 N 4 . Continuous net production of H 2 O 2 was realized at a rate of 2.78 ± 0.10 µM min –1 up to 54 h with isopropanol as the hole scavenger, whereas H 2 O 2 production was only sustained for ~ 6 h without scavengers. Both molecular simulations and advanced spectroscopic characterizations elucidated that the Cl dopant increased the charge transfer rate, decreased the bandgap, and reduced the activation energy of the rate-limiting step of O 2 reduction, all of which favored H 2 O 2 production. Furthermore, this work implemented a novel metal-free photocatalyst for sustainable H 2 O 2 production and elucidated the mechanism for promoting H 2 O 2 production that can guide future photoreactive nanomaterial design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determining local thermal transport in a composite uranium-nitride/silicide nuclear fuel using square-pulse transient thermoreflectance technique

Laser-based techniques have become an appealing option for determining the thermal diffusivities (D) and conductivities (k) of nuclear materials that would otherwise prove too hazardous or difficult to measure otherwise. These techniques have enabled non-destructive and non-contact thermal transport measurements with micron-level spatial resolution. In this study, a new time-domain technique known as square-wave pulse thermoreflectance (SPTR) is described and used to determine D values of both uranium sesquisilicide (U 3 Si 2 ) and uranium nitride (UN) phases in a composite fuel. An extensive sensitivity analysis was conducted that identified the optimal measurement parameters of standard materials with a range of thermal transport properties comparable to those of various fuel types. The standards were measured using both SPTR as well as a spatial-domain thermoreflectance technique (SDTR). Several U 3 Si 2 and UN phase regions of polished UN/U 3 Si 2 (70/30 vol.%) samples were measured using both methods, and the resulting calculated D and k values are reported, with both techniques showing excellent agreement between samples. Finally, the ability to use the technique for local diffusivity mapping was demonstrated over a multiphase region, and could be used to determine thermal transport properties in precipitates, secondary phases, and irradiation-damaged regions of post-irradiated fuel samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Irradiation creep measurement and microstructural analysis of chromium nitride–coated zirconium alloy using pressurized tubes

Environmental barrier coatings for Zr-based materials are currently under development to reduce oxidation and embrittlement in light-water reactors. Chromium nitride is one such candidate for this application, particularly as accident-tolerant fuel cladding. However, quantifying the impact of coatings on the irradiation-induced creep of zircaloy (Zry) is critical as this mechanism often exceeds thermal creep rates under light-water reactor operating conditions and can be a limiting design characteristic. Additionally, examining irradiation effects in the microstructure at the coating interface is key to understanding the compatibility of the material system. Here, to accelerate the experimental measurement of irradiation creep and microstructure evolution in CrN-Zry, compact, pressurized creep tubes were fabricated and irradiated in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory. Miniature, thin-walled rodlets fabricated from annealed Zr-Sn barstock were coated with CrN using physical vapor deposition (PVD) to nominal thicknesses of 4 and 8 μm. Coated and uncoated rodlet specimens were internally pressurized and welded, generating nominal circumferential hoop stresses of 0, 90, or 180 MPa under 300°C irradiation conditions. Twelve specimens were measured diametrically prior to irradiation using a low-cost, automated, contactless laser profilometer developed for this work. Specimens were irradiated in sealed capsules for one 25-day HFIR cycle, accumulating approximately 1.8 $\times$ 10 21 n/cm 2 fast fluence (E n > 10 MeV). The irradiated samples were retrieved and remeasured using the same profilometry system in a shielded hot cell facility. Irradiation creep between specimens was compared using standard statistical tests and showed that both thicknesses of CrN coating had a negligible effect on the irradiation creep strain of the Zry material. Microstructure characterization of pre- and post-irradiated CrN-Zry specimens showed minimal changes due to irradiation but did show a substantial O-rich region at the Zry-CrN interface.

36 MATERIALS SCIENCE↗

Raman spectroscopy of uranium nitride kernels

Uranium nitride is an advanced fuel candidate for a wide variety of advanced nuclear reactors. This work summarizes the first characterization of UN kernels by Raman spectroscopy. First-principles density functional theory calculations were performed to predict the Raman spectra of uranium sesquinitride (U 2 N 3 ), uranium dinitride (UN 2 ), uranium mononitride (UN), uranium monocarbide (UC), as well as U-N-C (UN 1-x C x ) and a U-N-C-O mixture. Further, a core–shell structure was identified by scanning electron microscopy and Raman spectroscopy imaging. A signal at ~500 cm -1 was identified on the periphery of the core-shell structure, possibly corresponding to U 2 N 3 and/or UN 2 . This signal broadens and shifts to 470 cm -1 because of the formation of UNC, UNCO or U 2 N 3+x structures. The culmination of this work demonstrates the feasibility of using Raman spectroscopy to identify variations in composition and phases in UN kernels.

36 MATERIALS SCIENCE↗

Assessment of uranium nitride interatomic potentials

Uranium mononitride (UN) is a promising nuclear fuel due to its high fissile density, high thermal conductivity, and suitability for reprocessing. In this study, two uranium nitride interatomic potentials are assessed: Tseplyaev and Starikov's angular-dependent potential and Kocevski et al.'s embedded atom model potential. Predictions of the thermophysical and elastic properties of UN, UN 2 , and α- and β-U 2 N 3 computed using both potentials are assessed and compared to available experimental data. Notably, the Tseplyaev potential performs better with the energetic aspects of UN, e.g., specific heat capacity and point defect formation energies, whereas the Kocevski potential performs better with the structural aspects of UN, e.g., thermal expansion as well as with the elastic properties. The reasons why the Kocevski potential underestimates the UN specific heat are explained by examining the UN phonon properties modeled using both potentials. The Kocevski potential shows better identification of the mechanical stability ranges of UN, UN 2 , and α- and β-U 2 N 3 , reasonably predicting the melting point of UN and predicting stable structures for UN 2 and α- and β-U 2 N 3 . On the other hand, the Tseplyaev potential predicts a premature phase change of both UN and UN 2 and cannot stabilize α- nor β-U 2 N 3 . However, the Kocevski potential cannot predict a stable α-U phase and is thus not suitable for the calculation of formation energies for non-stoichiometric point defects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measuring thermal diffusivity and gap conductance in uranium nitride and Zircaloy relevant for microreactor applications

Heat transfer across nuclear fuels and structural interfaces is an important factor for evaluating the performance of nuclear power systems. Specifically, heat generated as nuclear fuel fissions must be transported through the cladding material and through the reactor to reach the steam turbine for power generation. As new microreactor designs emerge, maximizing the efficiency of this heat transfer process becomes crucial to make them commercially viable. This article examines thermal diffusivity and gap conductance in uranium nitride (UN) fuel and Zircaloy-4 (Zry4) cladding using light flash analysis (LFA). Thermal diffusivity measurements were made on monolithic UN pellets and Zry4 exposed to carbon at peak operating temperatures of microreactors and show that carbon ingress has a minimal effect on thermal diffusivity when compared with identical materials not exposed to carbon. Evaluation of gap conductance at the UN-Zry4 interface was done using one-dimensional two-layer thermal transport models as a function of applied pressure. Here the results show that increasing pressure on the UN-Zry4 interface leads to gains in gap conductance per unit area in fuel-cladding assemblies at microreactor operating temperatures. While many other variables are expected to influence UN-Zry4 interfacial gap conductance (e.g. contact surface roughness, porosity, localized heating, environmental gas pressure), the work offers a demonstration of using a conventional LFA apparatus to determine this parameter at elevated temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Physicochemical evolution of uranium nitride kernel microstructure with varying carbon distribution for advanced TRISO fuel forms

Uranium nitride (UN) has emerged as a fuel candidate for advanced nuclear reactor concepts due to its superior uranium density, thermal conductivity, and high melting temperature. However, the fabrication route for converting UO 2 to UN is complex and difficult to standardize. Although the chemistry of this conversion process is well-studied, more insight into the physicochemical dynamics of this conversion using advanced characterization techniques can help further our understanding of this material system. This work leveraged thermogravimetric analysis (TGA), X-ray diffraction (XRD), and nondestructive 3D X-ray computed tomography (XCT) to characterize dynamic microstructural changes in the UO 2 → UCO → UN fabrication pathway for two kernels with a varying carbon distribution in the starting composition. TGA and XRD were used to quantify changes in the mass, density, and chemical composition of the two kernels, while three-dimensional image processing and segmentation of XCT data were used to quantify the volume, surface area, and spatial distribution of features within each kernel for multiple steps along the fabrication pathway. The analysis indicates distinct differences between the two kernels that are correlated to downstream conversion efficiency. In conclusion, this work is among the first to perform 3D quantification of physicochemical evolution during UN conversion, providing quantitative correlation between processing, properties, and expected fuel performance.

Nuclear fuel↗

Potential existence of post-perovskite nitrides; DFT studies of ThTaN{sub 3}

Within density functional theory, the equations of state for cubic perovskite (c-PV) and hypothetic orthorhombic perovskite (o-PV GdFeO{sub 3}-type) and post-perovskite (PPV) forms of ThTaN{sub 3} are obtained. The decreasing volume and stabilizing energy indicate pressure enabled transitions: c-PV ->o-PV ->PPV. From electronic structure analysis the chemical system is found insulating in the c-PV ground state form with {approx}1eV band gap and semi-conducting for the PPV due to increased covalence. The chemical bonding properties show that Th and Ta bondings with the 2 N sites are selectively differentiated and reinforced for Ta-N bond within PPV form. This is the consequence of the corner as well as edge sharing octahedra characterizing PPV while PV structures have only corner sharing octahedra. It is the first case of potential post-perovskite nitride. - ThTaN{sub 3}: Projected charge density (for 4 fu) onto basal plane: (a) cubic perovskite, (b) orthorhombic perovskite and (c) post-perovskite. Red, green and blue areas are relevant to strong, medium and low localization of density.

36 MATERIALS SCIENCE↗

Structural analysis of Li-intercalated hexagonal boron nitride

A structural investigation of Li-intercalated hexagonal boron nitride (Li-h-BNIC) was performed by synchrotron powder X-ray diffraction analysis and transmission electron microscopy. The host BN framework of Li-h-BNIC was expanded by Li-intercalation. The intralayer B-N bond length was increased by 2.48(1)% and the interlayer distance was expanded by 12.86(1)%. No superlattice structure of intercalated Li was observed. - Graphical abstract: XRD pattern fitting of the sample and schematic view of host h-BN lattice. Highlights: Black-Right-Pointing-Pointer Li-intercalated h-BN was investigated by synchrotron radiation powder XRD. Black-Right-Pointing-Pointer Lattice parameter of host h-BN lattice was increased by intercalation. Black-Right-Pointing-Pointer Increase ratio of B-N bond length was considerably larger than those of Li GICs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improvement of photocatalytic activity of tantalum nitride by ammonothermal treatment at high pressure

Tantalum nitride (Ta{sub 3}N{sub 5}) was treated under ammonothermal conditions with the ammonia pressure of 10 to 100 MPa at 823 K for 24 h to enhance the photocatalytic activity for hydrogen evolution from aqueous methanol solution under visible light irradiation. The rates of hydrogen evolution for all treated Ta{sub 3}N{sub 5} were faster than those for untreated Ta{sub 3}N{sub 5}. Treated Ta{sub 3}N{sub 5} showed higher enhanced activity for hydrogen evolution when treated with high-pressure ammonia at more than 50 MPa. The photocatalytic activity for hydrogen evolution of treated Ta{sub 3}N{sub 5}, related to the amount of defects, is due to reduced tantalum species. The enhancement in the activity is brought about by a decrease in surface defects, which contributes to improved electron transfer from the surface of Ta{sub 3}N{sub 5} to the loaded Pt co-catalyst. - Graphical abstract: Time course of H{sub 2} evolution for 0.5 wt% Pt- loaded Ta{sub 3}N{sub 5}. (a) As-synthesized Ta{sub 3}N{sub 5}. (b)-(e) Samples treated at 823 K for 5 h with (b) 10 MPa of N{sub 2}, (c) 10 MPa of NH{sub 3}, (d) 50 MPa of NH{sub 3}, and (e) 100 MPa of NH{sub 3}. Highlights: Black-Right-Pointing-Pointer Ta{sub 3}N{sub 5} was treated with high-pressure N{sub 2} or NH{sub 3} to enhance photocatalytic activity. Black-Right-Pointing-Pointer The hydrogen evolution activity of Ta{sub 3}N{sub 5} was more enhanced with treatment with NH{sub 3}. Black-Right-Pointing-Pointer Treatment with ammonia pressure above 50 MPa indicated a more improved activity. Black-Right-Pointing-Pointer The results of UV-vis DRS suggested decreased surface defects of treated Ta{sub 3}N{sub 5}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A color-tunable luminescent material with functionalized graphitic carbon nitride as multifunctional supports

A color-tunable luminescent material was prepared based on the composition of functionalized graphitic carbon nitride (g-C{sub 3}N{sub 4}) and europium (III). The functionalized g-C{sub 3}N{sub 4} layers not only behave as multifunctional supports including ligand coordinated with europium (III) and a support structure for the formation of the luminescent material, but exhibit excitation wavelength-dependent luminescence, thus the energy transfer between the functionalized g-C{sub 3}N{sub 4} and europium (III) can match very well by controlling the emission wavelength of functionalized g-C{sub 3}N{sub 4}. The as-prepared materials was comprehensively characterized via X-ray photoelectron spectroscopy, Fourier Transform Infrared spectroscopy, X-ray scattering techniques, Ultraviolet and Visible spectrophotometer, fluorescence spectrophotometer, thermogravimetric analysis, etc. The luminescent material exhibits multi-color emissions which are consistent with the characteristic emissions of europium (III) and functionalized g-C{sub 3}N{sub 4}, and the photoluminescence quality and density of the europium (III) can be greatly enhanced. The brilliant optical properties of the materials make them suiting for multipurpose applications in practical fields. - Graphical abstract: Schematic illustration of the synthesis and basic composition of the luminescent material. Inset figures were luminescence emission spectra of g-C{sub 3}N{sub 4} (A), europium (III) complex (a) and luminescent material (b) with the same concentration in (B) (K{sub ex}=350 nm) and photographs of (left) H{sub 2}O and (right) the H{sub 2}O dispersion of luminescence emission spectra under 350 nm UV radiation. The energy transfer in the luminescent material matchs very well and it exhibits multi-color emissions simultaneously. The enhanced photoluminescence quality and density of the europium (III) makes them suiting for multipurpose applications in practical fields. - Highlights: • Luminescent material exhibits multi-color emissions when excited by single wavelength. • The energy trsnsfer between functionalized g-C{sub 3}N{sub 4} and europium matches very vell. • Functionalized g-C{sub 3}N{sub 4} exhibits excitation wavelength-depengdent bright blue luminescence. • Functionalized g-C{sub 3}N{sub 4} layer provided as multifunctional supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, electronic and magnetic properties of carbon doped boron nitride nanowire: Ab initio study

Using spin-polarized density functional theory calculations, we demonstrated that carbon doped boron nitride nanowire (C-doped BNNW) has diverse electronic and magnetic properties depending on position of carbon atoms and their percentages. Our results show that only when one carbon atom is situated on the edge of the nanowire, C-doped BNNW is transformed into half-metal. The calculated electronic structure of the C-doped BNNW suggests that doping carbon can induce localized edge states around the Fermi level, and the interaction among localized edge states leads to semiconductor to half-metal transition. Overall, the bond reconstruction causes of appearance of different electronic behavior such as semiconducting, half-metallicity, nonmagnetic metallic, and ferromagnetic metallic characters. The formation energy of the system shows that when a C atom is doped on surface boron site, system is more stable than the other positions of carbon impurity. Our calculations show that C-doped BNNW may offer unique opportunities for developing nanoscale spintronic materials.

36 MATERIALS SCIENCE↗

Precipitation of aluminum nitride in a high strength maraging steel with low nitrogen content

In the present work, aluminum nitride (AlN) precipitation was investigated in a X23NiCoCrMoAl13-6-3 maraging steel with low nitrogen content (wt.% N = 5.5 ppm). A reliable and robust automatic method by scanning electron microscopy observations coupled with energy dispersive X-ray spectroscopy was developed for the quantification of AlN precipitates. The first stage was to identify the solvus temperature and to develop a heat treatment able to dissolve the AlN precipitates. The experimental determination of equilibrium conditions and solvus temperature show good agreement with ThermoCalc® simulation. Then, from this AlN-free state, the cooling rate, isothermal holding time and temperature were the subject of an intensive investigation in the austenite region of this maraging steel. In spite of the high temperatures used during heat treatments, the growth kinetic of the largest AlN precipitates (> 1 μm) is slow. The cooling rate has a major effect on the size and the number density of AlN due to a higher driving force for nucleation at low temperatures. At last, quenching prior to isothermal annealing at high temperatures leads to fine and dense AlN precipitation, resulting from the martensite to austenite transformation. Experimental results will be discussed and compared with kinetic data obtained with the mobility database MobFe2 implemented in Dictra® software. - Highlights: • Slow dissolution kinetic of AlN precipitates due to both their large size and small chemical driving force • Significant effects of cooling rate prior isothermal heat treatment, holding time and temperature on AlN precipitation • Size of AlN precipitates can be reduced by quenching prior isothermal holding. • Fine precipitation of AlN related to the α → γ transformation.

36 MATERIALS SCIENCE↗

Porous graphitic carbon nitride nanosheets by pre-polymerization for enhanced photocatalysis

Highlights: • A porous g-C{sub 3}N{sub 4} nanosheet is synthesized by a simple pre-polymerization method. • A large surface area and pore volume are obtained. • Formation mechanism of the porous structure is discussed. • Photocatalytic hydrogen evolution and degradation performances are both enhanced. - Abstract: A facile and green method was developed to fabricate porous graphitic carbon nitride (g-C{sub 3}N{sub 4}) nanosheets by simply pre-polymerizing melamine at 350 °C for 2 h. A porous structure was formed in the resulted g-C{sub 3}N{sub 4} (CN-350). Consequently, the specific surface area and pore volume of CN-350 was greatly enhanced, resulting in superior performance in photocatalytic hydrogen evolution and dye degradation. The hydrogen evolution rate and degradation constant of CN-350 were 11.2 and 8.8 times higher than that of bulk g-C{sub 3}N{sub 4} under visible light irradiation. The porous structure not only provided CN-350 with abundant active catalytic sites and cross-plane diffusion channels to facilitate the charge and mass transportation, but also promoted the charge separation in the photocatalytic reaction. This work provided a promising method for mass-production of highly active and stable g-C{sub 3}N{sub 4}-based photocatalysts for environmental and energetic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A new stepwise-pressing reaction method for synthesizing pure turbostractic boron nitride

A new stepwise-pressing reaction method is proposed, by which pure and near monodisperse turbostractic boron nitride (tBN) nano-particles with high yield (higher than 92%) are selectively synthesized via reacting BBr{sub 3} and (CH{sub 3}){sub 3}N at 260 {sup o}C in benzene. The obtained sample emits a strong photoluminescence band at 346 nm (under a excitation of 215 nm), making tBN a promising candidate for fabricating UV photoelectronic devices.

36 MATERIALS SCIENCE↗

Thin film growth of boron nitride on {alpha}-Al{sub 2}O{sub 3} (0 0 1) substrates by reactive sputtering

Highlights: Black-Right-Pointing-Pointer A BN film grown on {alpha}-Al{sub 2}O{sub 3} (0 0 1) had a structure in which h-BN sheet stacking continued through almost the whole film thickness. Black-Right-Pointing-Pointer The structure was characterized by X-ray diffraction, ATR-IR, and XPS. Black-Right-Pointing-Pointer Tauc plots suggested the film had direct band gap and the optical band gap was close to that of bulk h-BN. -- Abstract: Boron nitride thin films were grown on {alpha}-Al{sub 2}O{sub 3} (0 0 1) substrates by reactive magnetron sputtering. Infrared attenuated total reflection (ATR) spectra of the films gave an intense signal associated with in-plane B-N stretching TO mode of short range ordered structure of BN hexagonal sheets. X-ray diffraction for the film prepared at a low working pressure (ca. 1 Multiplication-Sign 10{sup -3} Torr) gave a diffraction peak at slightly lower angle than that corresponding to crystal plane h-BN (0 0 2). It is notable that crystal thickness calculated from X-ray peak linewidth (45 nm) was close to film thickness (53 nm), revealing well developed sheet stacking along the direction perpendicular to the substrate surface. When the substrates of MgO (0 0 1) and Si (0 0 1) were used, the short-range ordered structure of h-BN sheet was formed but the films gave no X-ray diffraction. The film showed optical band gap of 5.9 eV, being close to that for bulk crystalline h-BN.

36 MATERIALS SCIENCE↗