Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “moisture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Flame retardant biogenic building insulation materials from hemp fiber

Biogenic thermal insulation materials are in high demand because of its carbon-sequestration nature. However, high flammability, moisture condensation, and relatively high thermal conductivity of biogenic material are major concerns for sustainable building applications. In this study, we report the fire-retardant cellulose xerogel insulation nanocomposites derived from hemp fiber recycling and silica xerogel, in which the boric acid treatment improves its fire retardancy. The as-prepared materials show a low thermal conductivity of 31.3 mW/m K, high flexural modulus of 665 MPa, hydrophobicity with the water contact angle of 115°, and fire retardancy with 30% weight loss over a period of burning time 10 min. Overall, this work provides an effective method for the synthesis of fire-retardant biogenic thermal insulation materials and shows a promising way for next-generation bio-based insulation materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Techno‐economic assessment of single‐stream feedstock logistics supply chain for corn stover and grain

Abstract The state‐of‐technology for corn stover harvest is a multi‐pass system that collects the stover after grain harvest. An alternative is a single‐stream system where the grain and stover are harvested as a bulk material co‐stored and preserved by anerobic fermentation, and finally, co‐transported to a biorefinery. In the present work, four single‐pass whole‐plant bulk systems were compared with a conventional multi‐pass bale system. The single‐stream systems consisted of the harvest of corn grain and a portion of the stover fraction. Four machine configurations were simulated. This work predicted that a multi‐pass bale system would result in a material cost of 111.80 $2021 Mg –1 stover DM delivered to the biorefinery gate. Alternatively, the lowest cost single‐stream system was the self‐propelled forage harvester (SPFH) configured with the whole‐plant header, which delivered feedstock for 74.76 $2021 Mg stover DM –1 . In addition to machine configuration, a sensitivity analysis was performed to understand important drivers of feedstock cost. These analyses revealed that feedstock cost increased with moisture content, fertilizer price, and biorefinery size, and decreased with harvest season length, crop yield, and grower participation. This work demonstrated that single‐stream systems could reduce corn stover feedstock costs in comparison with state‐of‐technology systems. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗
DOE OSTI2023

Aldehyde and Ketone Hydroboration Mediated by a Heterogeneous Single–Site Molybdenum–Dioxo Catalyst: Scope and Mechanistic Implications

Efficient hydroboration of aldehydes and ketones is demonstrated using a single-site MoO 2 catalyst supported on activated carbon. Under mild conditions with low catalytic loadings, the reaction exhibits chemoselectivity towards carbonyl reduction over halides, alkene, alkyne, nitrile, and ester groups, affording high yields of desired products. Furthermore, competition studies between aldehyde and ketone reduction using HBpin and HBcat indicate that HBpin preferably functionalizes aldehydes, while HBcat can functionalize either substrate under specific conditions. Mechanistic studies suggest that the reaction proceeds via the initial formation of a molybdenum-hydride species upon B–H activation and subsequent molybdenum-alkoxide species upon carbonyl activation by the Mo center. The experimental activation energy of 14.3 kcal/mol alignssatisfactorily with the DFT computed ΔH ≠ of 18.7 kcal/mol, further supporting the proposed mechanism. Combined experimental/computational analyses reveal that excess HBpin can possibly deactivate the catalyst. The presence of excess benzaldehyde efficiently mitigates deactivation by HBpin, providing significantly higher catalyst recyclability. Altogether, this non-toxic, air- and moisture-stable, active, and selective catalyst demonstrates significant potential for green processes.

08 HYDROGEN↗
DOE OSTI2025

Filling the Gaps: A Bayesian Mixture Model for Imputing Missing Soil Water Content Data

ABSTRACT Soil water content (SWC) data are central to evaluating how soil moisture varies over time and space and influences critical plant and ecosystem functions, especially in water‐limited drylands. However, sensors that record SWC at high frequencies often malfunction, leading to incomplete timeseries and limiting our understanding of dryland ecosystem dynamics. We developed an analytical approach to impute missing SWC data, which we tested at six eddy flux tower sites along an elevation gradient in the southwestern United States. We impute missing data as a mixture of linearly interpolated SWC between the observed endpoints of a missing data gap and SWC simulated by an ecosystem water balance model (SOILWAT2). Within a Bayesian framework, we allowed the relative utility (mixture weight) of each component (linearly interpolated vs. SOILWAT2) to vary by depth, site and gap characteristics. We explored “fixed” weights versus “dynamic” weights that vary as a function of cumulative precipitation, average temperature, and time since the start of the gap. Both models estimated missing SWC data well ( R 2 = 0.70–0.88 vs. 0.75–0.91 for fixed vs. dynamic weights, respectively), but the utility of linearly interpolated versus SOILWAT2 values depended on site and depth. SOILWAT2 was more useful for more arid sites, shallower depths, longer and warmer gaps and gaps that received greater precipitation. Overall, the mixture model reliably gap‐fills SWC, while lending insight into processes governing SWC dynamics. This approach to impute missing data could be adapted to accommodate more than two mixture components and other types of environmental timeseries.

Ogle, Kiona [School of Informatics, Computing, and↗
DOE OSTI2020

Heterogeneity of soil structure and fertility during desertification of alpine grassland in northwest Sichuan

Abstract The variations of soil structure and soil physical–chemical properties in the process of alpine grassland desertification were revealed, and the indicators of grassland desertification were put forward in order to deepen the understanding of the law of degradation succession and development of alpine grassland. It was used to provide scientific basis for ecological restoration and improvement of ecological service function of alpine grassland. With severe desertification alpine grassland as the core in the Hongyuan County, Tibetan Qiang Autonomous Prefecture of Ngawa, Sichuan Province, China, along both the directions of wetland and arid grassland, the heterogeneity of soil structure and soil fertility in both directions was studied by the analysis of the mean weight diameter (MWD), geometric mean diameter (GMD), >0.25 mm aggregate content ( R 0.25 ), fractal dimension ( D ), soil bulk density, soil moisture content, and soil nutrients. Our results showed that MWD, GMD, and R 0.25 all gradually increased, but the D decreased with the reduction in the degree of desertification in the arid grassland and wetland, resulting in the strong stability of soil structure. The decreasing rate of the D in the direction of arid grassland was faster than that of wetland. Therefore, soil structure stability and erosion resistance in the direction of arid grassland were stronger than that of wetland soil; the D had different response to aggregates with different particle sizes. The aggregate less than 0.25 mm ( r = 0.981, P < 0.01) and 1–2 mm ( r = −0.79, P < 0.01) had the largest responses in the direction of the arid grassland and wetland, respectively; the aggregate more than 1 mm and 1–2 mm can be used as indicators to evaluate desertification of the soil in the direction of the arid grassland and wetland, respectively. The higher the content of the indicating aggregates, the weaker the degree of the desertification.

Ma, Li↗
DOE OSTI2022

Grassland productivity responds unexpectedly to dynamic light and soil water environments induced by photovoltaic arrays

Abstract Agrivoltaic (AV) systems are designed to coproduce photovoltaic (PV) energy on lands simultaneously supporting agriculture (food/forage production). PV infrastructure in agroecosystems alters resources critical for plant growth, and water‐limited agroecosystems such as grasslands are likely to be particularly sensitive to the unique spatial and temporal patterns of incident sunlight and soil water inherent within AV systems. However, the impact of resource alteration on forage production, the primary ecosystem service from managed grasslands, is poorly resolved. Here, we evaluated seasonal patterns of soil moisture (SM) and diurnal variation in incident sunlight (photosynthetic photon flux density [PPFD]) in a single‐axis‐tracking AV system established in a formerly managed semiarid C 3 grassland in Colorado. Our goals were to (1) quantify dynamic patterns of PPFD and SM within a 1.2 MW PV array in a perennial grassland, and (2) determine how aboveground net primary production (ANPP) and photosynthetic parameters responded to the resource patterns created by the PV array. We hypothesized that spatial variability in ANPP would be strongly related to SM patterns, typical of most grasslands. We measured significant reductions in ANPP directly beneath PV panels, where SM and PPFD were both low. However, in locations with significantly increased SM from the shedding and redistribution of precipitation by PV panels, ANPP was not increased. Instead, ANPP was greatest in locations where plants were shaded in the afternoon but received high levels of PPFD in the morning hours, when air temperatures and vapor pressure deficits were relatively low. Thus, contrary to expectations, we found relatively weak relationships between SM and ANPP despite significant spatial variability in both. Further, there was little evidence that light‐saturated photosynthesis ( A sat ) and quantum yield of CO 2 assimilation (ϕCO 2 ) differed for plants growing directly beneath (lowest PPFD) versus between (highest PPFD) PV panels. Overall, the AV system established in this semiarid managed grassland did not alter patterns of ANPP in ways predictable from past studies of controls of ANPP in open grasslands. However, our results suggest that the diurnal timing of low versus high periods of PPFD incident on plants is an important determinant of productivity patterns in grasslands.

14 SOLAR ENERGY↗
DOE OSTI2023

Temporal patterns of fine‐root dynamics have little influence on seasonal soil CO 2 efflux in a mixed, mesic forest

Among the contributors to soil CO 2 efflux, there remains uncertainty about the contribution of root activity to the overall soil efflux. Soil water and temperature frequently have been used to predict a large portion of the variation in soil CO 2 efflux. We hypothesized that fine-root dynamics explain most of the remaining variability in soil CO 2 efflux that cannot be explained by soil temperature and water content. We anticipated that seasonal increases in root production, mortality via decomposition, and standing crop would result in corresponding increases in soil CO 2 efflux. We tested our hypotheses by collecting and analyzing two years of minirhizotron and soil chamber CO 2 flux data from plots distributed throughout the Shale Hills Catchment of the Susquehanna-Shale Hills Critical Zone Observatory in Central Pennsylvania, USA. Here we showed that: (1) seasonal fluctuations in fine-root dynamics yielded only a very small increase in the predictability of soil CO 2 efflux; (2) fine-root mortality effects on soil CO 2 efflux were strongly tied to soil temperature; (3) fluctuations in fine-root presence or standing mass independent of temperature and moisture had little effect on soil CO 2 efflux; and (4) new fine-root length and root length mortality had limited impacts on soil CO 2 efflux rates. We conclude that, at least in temperate forests on rocky soils, characterizing fine-root dynamics may provide only limited improvement in the estimation of soil CO 2 efflux.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Using phenology to unravel differential soil water use and productivity in a semiarid savanna

Savannas are water-limited ecosystems characterized by two dominant plant types: trees and an understory primarily made up grass. Different phenology and root structures of these plant types complicate how savanna primary productivity responds to changes in water availability. We tested the hypothesis that productivity in savannas is controlled by the temporal and vertical distribution of soil water content (SWC) and differences in growing season length of understory and tree plant functional types. To quantify the relationship between tree, understory, and savanna-wide phenology and productivity, we used PhenoCam and satellite observations surrounding an eddy covariance tower at a semiarid savanna site in Arizona, USA. We distinguished between SWC across two different depth intervals (shallow, <0–30 cm and deep, >30–100 cm). We found that tree greenness increased with SWC at both depths, while understory greenness was only sensitive to the shallower SWC measurements. Onset of ecosystem dormancy, estimated from satellite observations close to the eddy covariance tower, explained more variability in annual gross primary productivity (GPP) than in other phenometrics. Higher SWC led to an extended growing season, caused by delayed dormancy in trees, but the understory showed no evidence of delayed dormancy in wetter periods. We infer that the timing of ecosystem scale dormancy, driven by trees, is important in understanding changes in a savanna's GPP. These findings highlight the important effects of rainfall during the winter. These findings suggest that savanna GPP is conditional on different responses to moisture availability in each of the dominant vegetation components.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Dynamic domain kinematic modelling for predicting interflow over leaky impeding layers

Traditional Boussinesq or kinematic simulations of interflow (i.e., lateral subsurface flow) assume no leakage through the impeding layer and require a no-flow boundary condition at the ridge top. However, recent analyses of many interflow-producing landscapes indicate that leaky impeding layers are common, that most interflow percolates well before reaching the toe slope, and therefore, the downslope contributing length is shorter than the hillslope length. In watersheds characterised by perched interflow over a low conductivity layer through permeable topsoil, interflow with percolation may be modelled with a kinematic wave model using a mobile upslope boundary condition defining the hillslope portion contributing interflow to valleys. Here, we developed and applied a dynamic interflow model to simulate interflow using a downslope travel distance concept such that only the active contributing length is modelled at any time. The model defines a variable active area based on the depth of the perched layer, the topographic slope and the ratio of the hydraulic conductivity of topsoil to that of the impeding layer. It incorporates a two-layer soil moisture accounting water balance analysis, a pedo-transfer function, and percolation and evaporation routines to predict interflow rates in continuous and event-based scenarios. We tested the modelling concept on two sets of data (2-year dataset of rainfall observations for the continuous simulation and a multi-day irrigation experiment for the event simulation) from a 121-m-long open interflow collection trench on an experimental hillslope at the Savannah River Site, South Carolina. The continuous model simulation partially represented the observed interflow hydrograph and perched water depth in the experimental hillslope with correlation coefficients of 0.85 and 0.35, respectively. Model performance improved significantly at event-scale analysis. The modelling approach realistically represents interflow dynamics in hillslopes with leaky impeding layers and can be integrated into catchment-scale hydrology models for more detailed hillslope process modelling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The Bear Brook Watershed in Maine: Multi-Decadal Whole-Watershed Experimental Acidification

The Bear Brook Watershed in Maine (BBWM) is a long-term research site established to study the response of forest ecosystem function to environmental disturbances of chronic acidic deposition and ecosystem nitrogen enrichment. Starting in 1989, the West Bear (treated) watershed received bimonthly applications of ammonium sulfate [(NH4)2SO4] fertilizer from above the canopy, whereas East Bear (reference) received ambient deposition. The treatments were stopped in 2016, marking the beginning of the recovery phase. Research at the site has focused on soils, streams, and vegetation. Here, we describe data collected over three decades at the BBWM—input and stream output nutrient fluxes, quantitative soil pits and soil chemistry, and soil temperature and moisture.

Patel, Kaizad F.↗
DOE OSTI2024

River–aquifer interactions enhancing evapotranspiration in a semiarid riparian zone: A modelling study

The hydrologic flows across the river–aquifer interface play an important role in groundwater dynamics and biogeochemical reactions within the subsurface; however, little is known about the effects of river–aquifer interactions on land surface processes. In this study, we developed a fully coupled three-dimensional (3D) land surface and subsurface model at a high resolution (~1 km) that accounts for high-frequency hydrologic exchange flow conditions to investigate how river–aquifer interactions modulate surface water budgets in the Upper Columbia-Priest Rapids watershed, a typical semiarid watershed located in the northwestern United States where river stage fluctuates in response to reservoir releases changing. Our results show that the spatiotemporal dynamics of river–aquifer interactions are highly heterogeneous, driven mainly by river-stage fluctuations. Adding 6.64 × 10 6 m 3 year –1 of water over the watershed from the river to groundwater owing to the lateral flow, river–aquifer interactions led to an increase in soil evaporation and transpiration supplied by higher soil moisture content, particularly in deeper subsurface. In a hypothetic future scenarios where a 5-m rise in river stage was assumed, the hydrologic flow exchange rates were intensified, resulting in higher surface water over the entire watershed. Overall, lateral flow induced by river–aquifer exchanges leads to an increase in evapotranspiration of ~75% in the historical period and of ~83% in the hypothetical future scenario. Finally, our study demonstrates the potential of coupled model as an effective tool for understanding river–aquifer–land surface interactions, and indicates that river–aquifer interactions fundamentally alter the water balance of the riparian zone for the semiarid watershed and will likely become more frequent and intense in the future under the effects of climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Energy‐Water Asynchrony Principally Determines Water Available for Runoff From Snowmelt in Continental Montane Forests

ABSTRACT Changes in the volume, rate, and timing of the snowmelt water pulse have profound implications for seasonal soil moisture, evapotranspiration (ET), groundwater recharge, and downstream water availability, especially in the context of climate change. Here, we present an empirical analysis of water available for runoff using five eddy covariance towers located in continental montane forests across a regional gradient of snow depth, precipitation seasonality, and aridity. We specifically investigated how energy‐water asynchrony (i.e., snowmelt timing relative to atmospheric demand), surface water input intensity (rain and snowmelt), and observed winter ET (winter AET) impact multiple water balance metrics that determine water available for runoff (WAfR). Overall, we found that WAfR had the strongest relationship with energy‐water asynchrony (adjusted r 2 = 0.52) and that winter AET was correlated to total water year evapotranspiration but not to other water balance metrics. Stepwise regression analysis demonstrated that none of the tested mechanisms were strongly related to the Budyko‐type runoff anomaly (highest adjusted r 2 = 0.21). We, therefore, conclude that WAfR from continental montane forests is most sensitive to the degree of energy‐water asynchrony that occurs. The results of this empirical study identify the physical mechanisms driving variability of WAfR in continental montane forests and are thus broadly relevant to the hydrologic management and modelling communities.

Webb, Ryan William↗
DOE OSTI2026

Modelling the Sensitivity of Yukon River Biogeochemical Dynamics to Environmental and Chemical Drivers: Implications for Dissolved Organic Carbon

Riverine dissolved organic carbon (DOC) is a critical biogeochemical component that transmits information from Arctic soils to the Arctic Ocean, significantly influencing carbon dynamics in this unique ecosystem. As DOC travels downstream, it undergoes transformations that alter its composition and fate. The Yukon River serves as an effective testbed for modelling these dynamics, offering sufficient scale to capture key biogeochemical processes while having a simpler hydrology than other major Arctic rivers, as well as long-term DOC observational data for model validation. To investigate DOC transformations during transit in the Yukon River, we adapted our Arctic Riverine Organic Macromolecular Model by applying regional-specific parameterisations. Our model simulates the transport and transformation of 15 organic macromolecules, including CDOM (coloured dissolved organic matter), proteins, polysaccharides, lipids, lignin phenols, and humic substances. Initial DOC concentrations were derived from observed soil organic carbon stocks in the surrounding watershed, while chemical transformations and hydrological dynamics were modelled along the river's course. Sensitivity and uncertainty analyses were conducted using a Monte Carlo approach under two experimental setups. Results revealed that variability in DOC and CDOM concentrations at the river mouth were predominantly driven by initial DOC concentration (~70% of variability explained) and dilution at confluence points (~10%). The refractory fraction of DOC explained 21%–88% of the variability in 14 macromolecular concentrations and ranked in the top five sensitive parameters for all outputs when a uniform parameter distribution was assumed. However, when a more likely variability was applied to this parameter, its influence on DOC and CDOM decreased. Given that refractory DOC accounts for ~80% of total DOC in Arctic Rivers, this suggests that most DOC resists degradation and retains its chemical composition during transport to the coastal environment. River velocity, which determines residence time, explained 8%–47% of the variability in protein, polysaccharide, lipid, pigments, and lignin phenols at the river mouth. In contrast, chemical turnover times contributed only 1%–5% to output variability. Our findings underscore the need for improved land-specific headwater observations, including seasonal soil moisture and lateral transport dynamics that control the initial tributary-specific DOC inputs. With accelerated permafrost thaw and increasing river discharge, extending our model to other Arctic River systems and seasons will enhance understanding of Arctic riverine carbon fluxes and their contributions to the Arctic Ocean.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In situ formation of pseudohalide anions induced by humid air and light passivates formamidinium‐based halide perovskites

Abstract Metal halide perovskites based on formamidinium (FA), or FA‐rich compositions have shown great promise for high‐performance photovoltaics. A deeper understanding of the impact of ambient conditions (e.g., moisture, oxygen, and illumination) on the possible reactions of FA‐based perovskite films and their processing sensitivities has become critical for further advances toward commercialization. Herein, we investigate reactions that take place on the surface of the FA 0.7 Cs 0.3 , mixed Br/I wide bandgap perovskite thin films in the presence of humid air and ambient illumination. The treatment forms a surface layer containing O, OH, and N‐based anions. We propose the latter originates from formamidine trapped at the perovskite/oxide interface reacting further to cyanide and/or formamidinate—an understudied class of pseudohalides that bind to Pb. Optimized treatment conditions improve photoluminescence quantum yield owing to both reduced surface recombination velocity and increased bulk carrier lifetime. The corresponding perovskite solar cells also exhibit improved performance. Identifying these reactions opens possibilities for better utilizing cyanide and amidinate ligands, species that may be expected during vapor processing of FA‐based perovskites. Our work also provides new insights into the self‐healing or self‐passivating of MA‐free perovskite compositions where FA and iodide damage could be partially offset by advantageous reaction byproducts. image

14 SOLAR ENERGY↗
DOE OSTI2025

Electron Microscopy Transfer System to Protect Atmosphere‐Sensitive Materials for Scanning Electron Microscopy Characterization

Atmosphere- and/or moisture-sensitive materials can be challenging to characterize using electron microscopy techniques due to sample preparation workflows that generally require exposure to ambient conditions. Here, we describe a novel preparation method that uses aluminum foil in combination with a commercial cryo-EM transfer system to circumvent undesired exposure to the atmosphere. First, hygroscopic MgCl 2 was used as a model material, and prepared samples (both protected and unprotected) were placed in a controlled-humidity environment (> 80% relative humidity) for various exposure lengths (circa seconds to hours). Following this, the effectiveness of the sample preparation method was determined by comparing qualitative photos and quantitative X-ray diffraction patterns between the two sample subsets. The combined results of these experiments suggest that the outlined preparation method effectively protects MgCl 2 from atmospheric contamination compared to MgCl 2 samples that had no protective measures taken. Finally, the preparation method was utilized to protect a highly hygroscopic crystalline BaO thin film for characterization via scanning electron microscopy, thereby demonstrating a functional application of the outlined preparation technique and an additional use for the commercial cryo-EM transfer system beyond its intended application.

atmosphere-sensitive materials↗
DOE OSTI2021

The impact of coupled air–sea interaction on extreme East Asian summer monsoon simulation in CMIP5 models

Abstract In this study, the relationship between the ability to simulate air–sea interactions over the western North Pacific (WNP), and to reproduce the extreme East Asian summer monsoon (EASM), were investigated by comparing the performances of several global climate models (GCMs). High ranked in air–sea interaction simulation (HRA) and low ranked in air–sea interaction simulation (LRA) models were selected, according to their performance in simulating relations between sea surface temperature (SST) and precipitation over the WNP, from the ensemble of models that participated in the third and fifth phases of the Coupled Model Intercomparison Project (CMIP3, CMIP5). Compared with CMIP3 models, CMIP5 models exhibited improved simulations of the distinctive air–sea interaction over the WNP, namely, the strong atmospheric forcing on the ocean. Among CMIP5 models, HRA models, which reproduced intrinsic negative correlations between precipitation and SST over the WNP, could simulate the extreme EASM better than LRA models. In particular, HRA models generated a more realistic spatial distribution of the extreme EASM compared with LRA models. The defects of the LRA models resulted from distorted synoptic fields, including underestimated geopotential height and overestimated low‐level wind over the WNP, inducing unrealistic moisture supply and convection due to the exaggerated SST forcing. In contrast, reasonable air–sea interactions represented in HRA models lead to realistic synoptic fields over the WNP, and proper simulation of the extreme EASM.

Kim, Taehyung↗
DOE OSTI2022

Advantages of a variable‐resolution global climate model in reproducing the seasonal evolution of East Asian summer monsoon

Abstract The East Asian summer monsoon (EASM) is unique among monsoon systems that it features meridional evolution of the summer monsoon. In this study, we evaluate the performances of a Variable‐Resolution Community Earth System Model (VR‐CESM) regionally refined over eastern China (14 km) in reproducing the seasonal evolution of EASM precipitation over China. Compared with reference datasets, VR‐CESM shows better performance than the corresponding globally uniform coarse‐resolution model CESM (quasi‐uniform 1°), especially over western China where complex local topography exists. The northward monsoon migration is closely related to low‐level southerly flows and vertical moisture advection, which are more reasonably simulated in VR‐CESM. The four critical timings of the EASM (monsoon onset, withdrawal, peak, and duration) are also better captured in VR‐CESM than in CESM. The corresponding spatial Pearson correlation coefficients of the four critical timings with respect to reference datasets are about 0.1 higher in VR‐CESM than those in CESM. Both models are most accurate in simulating monsoon onset and least accurate at simulating the monsoon peak. The overestimated zonal thermal contrast in CESM is responsible for the earlier monsoon onset and excessive precipitation in September over the Yangtze River valley. Finer resolution in VR‐CESM, especially over the Tibetan Plateau (TP), appears to be a main factor in simulating better zonal thermal contrast and seasonal evolution of the EASM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Observational study of the South American low-level jet during the SALLJEX

The South American Low-Level Jet (SALLJ) east of the Andes is a narrow maximum northerly wind present just above the boundary layer. It is an important component of the tropical-extratropical exchange of heat and moisture in South America and favors deep moist convection in Southeastern South America (SESA). In the present study, the SALLJ characteristics during the 2002-2003 summer season are investigated using upper-air measurements collected during the SALLJ Experiment (SALLJEX). At most stations, the highest wind speed was observed below 3000 m between 06 and 12 UTC, mainly in association with a maximization of the northerly component of the wind while the zonal component reached its minimum. Here, an increase in the maximum wind speed from 10°S to Santa Cruz de la Sierra’s latitude and from there a weakening southward was found throughout the SALLJEX network. Additionally, SALLJEX observations allowed to locate SALLJ core purely from observations in a region just east of the Andes in agreement with previous studies. A new localized kinematic classification was developed and applied in this study to analyze the relationship between the SALLJ intensity and the thermodynamic properties of the lower layers of the atmosphere. Weak, moderate, and strong SALLJ categories were defined with a local threshold of the northerly wind speed maximum at each station. The strongest SALLJs were frequently observed at nighttime, while weaker SALLJs were likely to occur at any time of the day. A stabilization of the nocturnal boundary layer was observed between weak and moderate cases whereas a destabilization between moderate and strong cases were found near the time of the wind speed maximum (06 UTC) at Santiago del Estero and Resistencia stations. A deepening of the convective boundary layer and an increase of its mean temperature between weak and strong category during the previous afternoon to nocturnal SALLJs, reveal a possible contribution to the mechanisms that generate the maximum wind speed.

54 ENVIRONMENTAL SCIENCES↗