Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maximum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Development of a Cure Model for Unsaturated Polyester Resin Systems Based on Processing Conditions

Unsaturated polyester resin (UPR) systems are extensively used in composite materials for applications in the transportation, marine, and infrastructure sectors. There are continually evolving formulations of UPRs that need to be evaluated and optimized for processing. Differential Scanning Calorimetry (DSC) provides valuable insight into the non-isothermal and isothermal behavior of UPRs within a prescribed temperature range. In the present work, non-isothermal DSC tests were carried out between temperatures of 0.0 °C and 250 °C, through different heating and cooling ramp rates. The isothermal DSC tests were carried out between 0.0 and 170 °C. The instantaneous rate of cure of the tested temperatures were measured. The application of an autocatalytic model in a calculator was used to simulate curing behaviors under different processing conditions. As the temperature increased from 10 °C up to 170 °C, the rate of cure reduced, and the heat of reaction increased. The simulated cure behavior from the DSC data showed that the degree of cure (α) maximum value of 71.25% was achieved at the highest heating temperature of 85 °C. For the low heating temperature, i.e., 5 °C, the maximum degree of cure (α) did not exceed 12% because there was not enough heat to activate the catalyst to crosslink further.

Polymer Science↗
DOE OSTI2021

Displacement Analysis of Geothermal Field Based on PSInSAR And SOM Clustering Algorithms A Case Study of Brady Field, Nevada—USA

The availability of free and high temporal resolution satellite data and advanced SAR techniques allows us to analyze ground displacement cost-effectively. Our aim was to properly define subsidence and uplift areas to delineate a geothermal field and perform time-series analysis to identify temporal trends. A Persistent Scatterer Interferometry (PSI) algorithm was used to estimate vertical displacement in the Brady geothermal field located in Nevada by analyzing 70 Sentinel-1A Synthetic-Aperture Radar (SAR) images, between January 2017 and December 2019. To classify zones affected by displacement, an unsupervised Self-Organizing Map (SOM) algorithm was applied to classify points based on their behavior in time, and those clusters were used to determine subsidence, uplift, and stable regions automatically. Finally, time-series analysis was applied to the clustered data to understand the inflection dates. The maximum subsidence is –19 mm/yr with an average value of –6 mm/yr within the geothermal field. The maximum uplift is 14 mm/yr with an average value of 4 mm/yr within the geothermal field. The uplift occurred on the NE of the field, where the injection wells are located. On the other hand, subsidence is concentrated on the SW of the field where the production wells are located. The coupling of the PSInSAR and the SOM algorithms was shown to be effective in analyzing the direction and pattern of the displacements observed in the field.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

High-Resolution Image Products Acquired from Mid-Sized Uncrewed Aerial Systems for Land–Atmosphere Studies

We assess the viability of deploying commercially available multispectral and thermal imagers designed for integration on small uncrewed aerial systems (sUASs, <25 kg) on a mid-size Group-3-classification UAS (weight: 25–600 kg, maximum altitude: 5486 m MSL, maximum speed: 128 m/s) for the purpose of collecting a higher spatial resolution dataset that can be used for evaluating the surface energy budget and effects of surface heterogeneity on atmospheric processes than those datasets traditionally collected by instrumentation deployed on satellites and eddy covariance towers. A MicaSense Altum multispectral imager was deployed on two very similar mid-sized UASs operated by the Atmospheric Radiation Measurement (ARM) Aviation Facility. This paper evaluates the effects of flight on imaging systems mounted on UASs flying at higher altitudes and faster speeds for extended durations. We assess optimal calibration methods, acquisition rates, and flight plans for maximizing land surface area measurements. We developed, in-house, an automated workflow to correct the raw image frames and produce final data products, which we assess against known spectral ground targets and independent sources. We intend this manuscript to be used as a reference for collecting similar datasets in the future and for the datasets described within this manuscript to be used as launching points for future research.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Acoustic Tomography of the Atmosphere: A Large-Eddy Simulation Sensitivity Study

Accurate measurement of atmospheric turbulent fluctuations is critical for understanding environmental dynamics and improving models in applications such as wind energy. Advanced remote sensing technologies are essential for capturing instantaneous velocity and temperature fluctuations. Acoustic tomography (AT) offers a promising approach that utilizes sound travel times between an array of transducers to reconstruct turbulence fields. This study presents a systematic evaluation of the time-dependent stochastic inversion (TDSI) algorithm for AT using synthetic travel-time measurements derived from large-eddy simulation (LES) fields under both neutral and convective atmospheric boundary-layer conditions. Unlike prior work that relied on field observations or idealized fields, the LES framework provides a ground-truth atmospheric state, enabling quantitative assessment of TDSI retrieval reliability, sensitivity to travel-time measurement noise, and dependence on covariance model parameters and temporal data integration. A detailed sensitivity analysis was conducted to determine the best-fit model parameters, identify the tolerance thresholds for parameter mismatch, and establish a maximum spatial resolution. The TDSI algorithm successfully reconstructed large-scale velocity and temperature fluctuations with root mean square errors ( RMSE s) below 0.35 m/s and 0.12 K, respectively. Spectral analysis established a maximum spatial resolution of approximately 1.4 m, and reconstructions remained robust for travel-time measurement uncertainties up to 0.002 s. These findings provide critical insights into the operational limits of TDSI and inform future applications of AT for atmospheric turbulence characterization and system design.

17 WIND ENERGY↗
DOE OSTI2021

Graphical Optimization of Spectral Shift Reconstructions for Optical Backscatter Reflectometry

Optical backscatter reflectometry (OBR) is an interferometric technique that can be used to measure local changes in temperature and mechanical strain based on spectral analyses of backscattered light from a singlemode optical fiber. The technique uses Fourier analyses to resolve spectra resulting from reflections occurring over a discrete region along the fiber. These spectra are cross-correlated with reference spectra to calculate the relative spectral shifts between measurements. The maximum of the cross-correlated spectra—termed quality—is a metric that quantifies the degree of correlation between the two measurements. Recently, this quality metric was incorporated into an adaptive algorithm to (1) selectively vary the reference measurement until the quality exceeds a predefined threshold and (2) calculate incremental spectral shifts that can be summed to determine the spectral shift relative to the initial reference. Using a graphical (network) framework, this effort demonstrated the optimal reconstruction of distributed OBR measurements for all sensing locations using a maximum spanning tree (MST). By allowing the reference to vary as a function of both time and sensing location, the MST and other adaptive algorithms could resolve spectral shifts at some locations, even if others can no longer be resolved.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Comparative Analysis of Hotspot Stress Endurance in Pristine and Thermal Cycled Prestressed Glass–Glass Photovoltaic Modules

Hotspots pose a significant long-term reliability challenge in photovoltaic (PV) modules that can have a detrimental impact on the efficiency, safety, and financial viability of a PV system. This paper aims to evaluate the endurance of hotspot stress in pristine and prestressed glass–glass (GG) modules. The accelerated prestressing was conducted for 600 thermal cycles (TC600) to represent decades of field exposure. GG modules are quickly becoming an alternative to the traditional glass–backsheet (GB) modules that have been the industry standard. Unlike other conventional studies that subject only pristine modules to hotspot stress, this paper evaluates the performance of an accelerated/simulated field-aged GG module (using TC600) and a pristine GG module. Pre- and post-characterizations were performed before and after each test to determine changes in electrical performance and observe any defects in GG modules. During the hotspot test, an approximately 200 °C maximum cell temperature was observed with a cell shading of 25% (the worst-case shading ratio). After the hotspot test, electroluminescence imaging indicated that most cells in the prestressed GG module exhibited severe damage whereas no significant defects were evident in the pristine GG module where the prestressed GG module degraded 8.2% and the pristine GG module degraded 1.5% in maximum power. These findings are critical for the industry, considering that GG bifacial modules will dominate the market.

14 SOLAR ENERGY↗
DOE OSTI2024

Description of Pegethrix niliensis sp. nov., a Novel Cyanobacterium from the Nile River Basin, Egypt: A Polyphasic Analysis and Comparative Study of Related Genera in the Oculatellales Order

In this paper, we examine the filamentous cyanobacterial strain NILCB16 and describe it as a new species within the genus Pegethrix. The original population was sampled from a mat growing in an irrigation canal in the Nile River, Egypt. Initially classified under Plectonema or Planktolyngbya, the strain is a potential producer of the toxins microcystin and β-N-Methylamino-L-Alanine (BMAA). Additionally, we reviewed the taxonomic relationships between the Oculatellales genera. To describe the new species, we conducted a polyphasic study, encompassing 16S rRNA gene phylogenetic analyses performed using both Maximum Likelihood and Bayesian methods, sequence identity (p-distance) analysis, 16S-23S ITS secondary structures, and morphological and habitat comparisons. The phylogenetic analysis revealed that strain NILCB16 clustered within the Pegethrix clade with strong phylogenetic support, but in a distinct position from other species in the genus. The strain shared a maximum 16S rRNA gene identity of 97.3% with P. qiandaoensis and 96.1% with the type species, P. bostrychoides. Morphologically, NILCB16 can be differentiated from other species in the genus by its lack of false branching. Our phylogenetic analyses also show that Pegethrix, Cartusia, Elainella, and Maricoleus are clustered with strong phylogenetic support. They exhibit high 16S rRNA gene identity and are morphologically indistinguishable, suggesting they could potentially be merged into a single genus in the future.

Hentschke, Guilherme Scotta (ORCID:000000034396024↗
DOE OSTI2024

Multi-Epoch Optical Spectroscopy Variability of the Changing-Look AGN Mrk 883

In this work, we present multi-epoch optical spectra of the Seyfert 1.9 galaxy Mrk 883. Data were obtained with the Gran Telescopio Canarias and the MEGARA Integral Field Unit mode, archival data from the SDSS-IV MaNGA Survey and the SDSS-I Legacy Survey, and new spectroscopic observations obtained at San Pedro Mártir Observatory. We report the appearance of the broad component of Hβ emission line, showing a maximum FWHM ∼ 5927 ± 481 km s−1 in the MaNGA spectra, finding evidence for a change from Seyfert 1.9 (23 June 2003) to Seyfert 1.8 (18 May 2018). The observed changing-look variation from Sy1.9 to Sy1.8 has a timescale Δt ∼15 y. In addition, we observe profile and flux broad emission line variability from 2018 to 2023, and a wind component in [OIII]5007 Å, with a maximum FWHM = 1758 ± 178 km s−1, detected on 15 April 2023. In all epochs, variability of the broad lines was found to be disconnected from the optical continuum emission, which shows little or no variations. These results suggest that an ionized-driven wind in the polar direction could be a possible scenario to explain the observed changing-look variations.

Benítez, Erika (ORCID:0000000310182613)↗
DOE OSTI2020

Optical Linear Polarization toward the Open Star Cluster Casado Alessi 1

We present B-, V-, R-, and I-band linear polarimetric observations of 73 stars in the direction of open star cluster Casado Alessi 1 (hereafter Alessi 1). We aim to use polarimetry as a tool to investigate the properties and distribution of dust grains toward the direction of the cluster. The polarimetric observations were carried out using the ARIES IMaging POLarimeter mounted at the 104 cm telescope of ARIES, Nainital (India). Using the Gaia photometric data the age and distance of the cluster are estimated to be 0.8 ± 0.1 Gyr and 673 ± 98 pc, respectively. A total of 66 stars with a 26′ radius from the cluster are identified as members of the cluster using the astrometric approach. Out of these 66 members, 15 stars were observed polarimetrically and found to have the same value of polarization. The majority of the stars in the region follow the general law of polarization for the interstellar medium, indicating that polarization toward the cluster Alessi 1 is dominated by foreground dust grains. The average values of the maximum polarization (P {sub max}) and the wavelength corresponding to the maximum polarization (λ {sub max}) toward the cluster are found to be 0.83 ± 0.03% and 0.59 ± 0.04 μm, respectively. Also, dust grains toward the cluster appear to be aligned, possibly due to the galactic magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

The Outburst of the Young Star Gaia19bey

We report photometry and spectroscopy of the outburst of the young stellar object Gaia19bey. We have established the outburst light curve with archival Gaia “G,” ATLAS “Orange,” Zwicky Transient Facility r-band, and Pan-STARRS “rizy”-filter photometry, showing an outburst of ~4 yr duration, longer than typical EX Lupi objects but shorter than FU Orionis objects. Its pre-outburst spectral energy distribution shows a flat far-infrared spectrum, confirming the early evolutionary state of Gaia19bey and its similarity to other deeply embedded young stars experiencing outbursts. A lower limit to the peak outburst luminosity is ~182 L{sub ⊙} at an assumed distance of 1.4 kpc, the minimum plausible distance. Infrared and optical spectroscopy near maximum light show an emission line spectrum, including H i lines, strong red Ca ii emission, other metal emission lines, infrared CO bandhead emission, and a strong infrared continuum. Toward the end of the outburst, the emission lines have all but disappeared and the spectrum has changed into an almost pure continuum spectrum. This indicates a cessation of magnetospheric accretion activity. The near-infrared colors have become redder as Gaia19bey has faded, indicating a cooling of the continuum component. Near the end of the outburst, the only remaining strong emission lines are forbidden shock-excited emission lines. Adaptive optics integral-field spectroscopy shows the H{sub 2} 1–0 S(1) emission with the morphology of an outflow cavity and the extended emission in the [Fe ii] line at 1644 nm with the morphology of an edge-on disk. However, we do not detect any large-scale jet from Gaia19bey.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Interplanetary Protons versus Interacting Protons in the 2017 September 10 Solar Eruptive Event

We analyze the relativistic proton emission from the Sun during the eruptive event on 2017 September 10, which caused a ground-level enhancement (GLE 72) registered by the worldwide network of neutron monitors. Using the neutron monitor data and interplanetary transport modeling both along and across interplanetary magnetic field (IMF) lines, we deduce parameters of the proton injection into the interplanetary medium. The inferred injection profile of the interplanetary protons is compared with the profile of the >100 MeV γ -ray emission observed by the Fermi Large Area Telescope, attributed to pion production from the interaction of >300 MeV protons at the Sun. GLE 72 started with a prompt component that arrived along the IMF lines. This was followed by a more prolonged enhancement caused by protons arriving at the Earth across the IMF lines from the southwest. The interplanetary proton event is modeled using two sources—one source at the root of the Earth-connected IMF line and another source situated near the solar western limb. The maximum phase of the second injection of interplanetary protons coincides with the maximum phase of the prolonged >100 MeV γ -ray emission that originated from a small area at the solar western limb, below the current sheet trailing the associated coronal mass ejection (CME). A possible common source of interacting protons and interplanetary protons is discussed in terms of proton acceleration at the CME bow shock versus coronal (re-)acceleration in the wake of the CME.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Search for PeV Gamma-Ray Emission from the Southern Hemisphere with 5 Yr of Data from the IceCube Observatory

The measurement of diffuse PeV gamma-ray emission from the Galactic plane would provide information about the energy spectrum and propagation of Galactic cosmic rays, and the detection of a pointlike source of PeV gamma-rays would be strong evidence for a Galactic source capable of accelerating cosmic rays up to at least a few PeV. This paper presents several unbinned maximum-likelihood searches for PeV gamma-rays in the Southern Hemisphere using 5 yr of data from the IceTop air shower surface detector and the in-ice array of the IceCube Observatory. The combination of both detectors takes advantage of the low muon content and deep shower maximum of gamma-ray air showers and provides excellent sensitivity to gamma-rays between ~0.6 and 100 PeV. Our measurements of pointlike and diffuse Galactic emission of PeV gamma-rays are consistent with the background, so we constrain the angle-integrated diffuse gamma-ray flux from the Galactic plane at 2 PeV to 2.61 × 10 -19 cm -2 s -1 TeV -1 at 90% confidence, assuming an E -3 spectrum, and we estimate 90% upper limits on pointlike emission at 2 PeV between 10 -21 and 10 -20 cm -2 s -1 TeV -1 for an E -2 spectrum, depending on decl. Furthermore, we exclude unbroken power-law emission up to 2 PeV for several TeV gamma-ray sources observed by the High Energy Spectroscopic System and calculate upper limits on the energy cutoffs of these sources at 90% confidence. We also find no PeV gamma-rays correlated with neutrinos from IceCube's high-energy starting event sample. Lastly, these are currently the strongest constraints on PeV gamma-ray emission.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

The Young and Nearby Normal Type Ia Supernova 2018gv: UV-optical Observations and the Earliest Spectropolarimetry

The nondetection of companion stars in SN Ia progenitor systems lends support to the notion of double-degenerate systems and explosions triggered by the merging of two white dwarfs. This very asymmetric process should lead to a conspicuous polarimetric signature. By contrast, observations consistently find very low continuum polarization as the signatures from the explosion process largely dominate over the pre-explosion configuration within several days. Critical information about the interaction of the ejecta with a companion and any circumstellar matter is encoded in the early polarization spectra. In this study, we obtain spectropolarimetry of SN 2018gv with the ESO Very Large Telescope at -13.6 days relative to the B-band maximum light, or ~5 days after the estimated explosion—the earliest spectropolarimetric observations to date of any SN Ia. These early observations still show a low continuum polarization (lesssim0.2%) and moderate line polarization (0.30% ± 0.04% for the prominent Si ii λ6355 feature and 0.85% ± 0.04% for the high-velocity Ca component). The high degree of spherical symmetry implied by the low-line and continuum polarization at this early epoch is consistent with explosion models of delayed detonations and is inconsistent with the merger-induced explosion scenario. Finally, the dense UV and optical photometry and optical spectroscopy within the first ~100 days after the maximum light indicate that SN 2018gv is a normal SN Ia with similar spectrophotometric behavior to SN 2011fe.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

SN 2019yvq Does Not Conform to SN Ia Explosion Models

We present new photometric and spectroscopic observations of SN 2019yvq, a Type Ia supernova (SN Ia) exhibiting several peculiar properties including an excess of UV/optical flux within days of explosion, a high Si ii velocity, and a low peak luminosity. Photometry near the time of first light places new constraints on the rapid rise of the UV/optical flux excess. Furthermore, a near-infrared spectrum at +173 days after maximum light places strict limits on the presence of H or He emission, effectively excluding the presence of a nearby nondegenerate star at the time of explosion. New optical spectra, acquired at +128 and +150 days after maximum light, confirm the presence of [Ca ii] λ7300 and persistent Ca ii NIR triplet emission as SN 2019yvq transitions into the nebular phase. The lack of [O i]$\lambda 6300$ emission disfavors the violent merger of two C/O white dwarfs (WDs) but the merger of a C/O WD with a He WD cannot be excluded. We compare our findings with several models in the literature postulated to explain the early flux excess including double-detonation explosions, 56 Ni mixing into the outer ejecta during ignition, and interaction with H- and He-deficient circumstellar material. Each model may be able to explain both the early flux excess and the nebular [Ca ii] emission, but none of the models can reconcile the high photospheric velocities with the low peak luminosity without introducing new discrepancies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Transport of Protostellar Cosmic Rays in Turbulent Dense Cores

We report recent studies have suggested that low-energy cosmic rays (CRs) may be accelerated inside molecular clouds by the shocks associated with star formation. We use a Monte Carlo transport code to model the propagation of CRs accelerated by protostellar accretion shocks through protostellar cores. We calculate the CR attenuation and energy losses and compute the resulting flux and ionization rate as a function of both radial distance from the protostar and angular position. We show that protostellar cores have nonuniform CR fluxes that produce a broad range of CR ionization rates, with the maximum value being up to two orders of magnitude higher than the radial average at a given distance. In particular, the CR flux is focused in the direction of the outflow cavity, creating a "flashlight" effect and allowing CRs to leak out of the core. The radially averaged ionization rates are less than the measured value for the Milky Way of ζ ≈ 10 -16 s -1 ; however, within r ≈ 0.03 pc from the protostar, the maximum ionization rates exceed this value. We show that variation in the protostellar parameters, particularly in the accretion rate, may produce ionization rates that are a couple of orders of magnitude higher or lower than our fiducial values. Finally, we use a statistical method to model unresolved subgrid magnetic turbulence in the core. We show that turbulence modifies the CR spectrum and increases the uniformity of the CR distribution but does not significantly affect the resulting ionization rates.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Three-dimensional Core-collapse Supernova Simulations with 160 Isotopic Species Evolved to Shock Breakout

We present three-dimensional simulations of core-collapse supernovae using the FLASH code that follow the progression of the explosion to the stellar surface, starting from neutrino radiation hydrodynamic simulations of the neutrino-driven phase performed with the Chimera code. We consider a 9.6 M ⊙ zero-metallicity progenitor starting from both 2D and 3D Chimera models and a 10 M ⊙ solar-metallicity progenitor starting from a 2D Chimera model, all simulated until shock breakout in 3D while tracking 160 nuclear species. The relative velocity difference between the supernova shock and the metal-rich Rayleigh–Taylor (R-T) "bullets" determines how the metal-rich ejecta evolves as it propagates through the density profile of the progenitor and dictates the final morphology of the explosion. We find maximum 56 Ni velocities of ~1950 and ~1750 km s -1 at shock breakout from 2D and 3D 9.6 M ⊙ Chimera models, respectively, due to the bullets' ability to penetrate the He/H shell. When mapping from 2D, we find that the development of higher-velocity structures is suppressed when the 2D Chimera model and 3D FLASH model meshes are aligned. The development of faster-growing spherical-bubble structures, as opposed to the slower-growing toroidal structure imposed by axisymmetry, allows for interaction of the bullets with the shock and seeds further R-T instabilities at the He/H interface. We see similar effects in the 10 M ⊙ model, which achieves maximum 56 Ni velocities of ~2500 km s -1 at shock breakout.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Late-onset Circumstellar Medium Interactions are Rare: An Unbiased GALEX View of Type Ia Supernovae

Abstract Using ultraviolet (UV) light curves, we constrain the circumstellar environments of 1080 Type Ia supernovae (SNe Ia) within z < 0.5 from archival Galaxy Evolution Explorer (GALEX) observations. All SNe Ia are required to have pre- and post-explosion GALEX observations to ensure adequate subtraction of the host-galaxy flux. Using the late-time GALEX observations, we look for the UV excess expected from any interaction between the SN ejecta and circumstellar material (CSM). Four SNe Ia are detected near maximum light, and we compare the GALEX photometry to archival data. However, we find that none of our targets show convincing evidence of CSM interaction. A recent Hubble Space Telescope (HST) survey estimates that ∼6% of SNe Ia may interact with distant CSM, but statistical inferences are complicated by the small sample size and selection effects. By injecting model light curves into our data and then recovering them, we constrain a broad range of CSM interactions based on the CSM interaction start time and the maximum luminosity. Combining our GALEX nondetections with the HST results, we constrain occurrence of late-onset CSM interaction among SNe Ia with moderate CSM interaction, similar to that observed in PTF11kx, to f CSM ≲ 5.1% between 0 and 500 days after discovery and ≲2.7% between 500 and 1000 days after discovery at 90% confidence. For weaker CSM interactions similar to SN 2015cp, we obtain limits of ≲16% and ≲4.8%, respectively, for the same time ranges.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Bump Morphology of the CMAGIC Diagram

Abstract We apply the color–magnitude intercept calibration method (CMAGIC) to the Nearby Supernova Factory SNe Ia spectrophotometric data set. The currently existing CMAGIC parameters are the slope and intercept of a straight line fit to the linear region in the color–magnitude diagram, which occurs over a span of approximately 30 days after maximum brightness. We define a new parameter, ω XY , the size of the “bump” feature near maximum brightness for arbitrary filters X and Y . We find a significant correlation between the slope of the linear region, β XY , in the CMAGIC diagram and ω XY . These results may be used to our advantage, as they are less affected by extinction than parameters defined as a function of time. Additionally, ω XY is computed independently of templates. We find that current empirical templates are successful at reproducing the features described in this work, particularly SALT3, which correctly exhibits the negative correlation between slope and “bump” size seen in our data. In 1D simulations, we show that the correlation between the size of the “bump” feature and β XY can be understood as a result of chemical mixing due to large-scale Rayleigh–Taylor instabilities.

79 ASTRONOMY AND ASTROPHYSICS↗