Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “location map”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

An Impact-Location Estimation Algorithm for Subsonic Uninhabited Aircraft

An impact-location estimation algorithm is being used at the NASA Dryden Flight Research Center to support range safety for uninhabited aerial vehicle flight tests. The algorithm computes an impact location based on the descent rate, mass, and altitude of the vehicle and current wind information. The predicted impact location is continuously displayed on the range safety officer's moving map display so that the flightpath of the vehicle can be routed to avoid ground assets if the flight must be terminated. The algorithm easily adapts to different vehicle termination techniques and has been shown to be accurate to the extent required to support range safety for subsonic uninhabited aerial vehicles. This paper describes how the algorithm functions, how the algorithm is used at NASA Dryden, and how various termination techniques are handled by the algorithm. Other approaches to predicting the impact location and the reasons why they were not selected for real-time implementation are also discussed.

Bauer, Jeffrey E.↗

O VI IN THE LOCAL INTERSTELLAR MEDIUM

We report the results of a search for O VI absorption in the spectra of 80 hot DA white dwarfs observed by the FUSE satellite. We have carried out a detailed analysis of the radial velocities of interstellar and (where present) stellar absorption lines for the entire sample of stars. In approximately 35% of cases (where photospheric material is detected), the velocity differences between the interstellar and photospheric components were beneath the resolution of the FUSE spectrographs. Therefore, in 65% of these stars the interstellar and photospheric contributions could be separated and the nature of the O VI component unambiguously determined. Furthermore, in other examples, where the spectra were of a high signal-to-noise, no photospheric material was found and any O VI detected was assumed to be interstellar. Building on the earlier work of Oegerle et al. and Savage and Lehner, we have increased the number of detections of interstellar O VI and, for the first time, compared their locations with both the soft X-ray background emission and new detailed maps of the distribution of neutral gas within the local interstellar medium. We find no strong evidence to support a spatial correlation between O VI and SXRB emission. In all but a few cases, the interstellar O VI was located at or beyond the boundaries of the local cavity. Hence, any T {approx} 300,000 K gas responsible for the O VI absorption may reside at the interface between the cavity and surrounding medium or in that medium itself. Consequently, it appears that there is much less O VI-bearing gas than previously stated within the inner rarefied regions of the local interstellar cavity.

79 ASTRONOMY AND ASTROPHYSICS↗

Galactic Abundance Gradients fro IR Fine Strucuture LInes in Compact H II regions

We present observations of the [S III]19(micro)m, [O III]52 and 88(micro)m, and [N III]57(micro)m lines toward 18 compact and ultracompact (UC) H II regions. These data were combined with data from the literature and high-resolution radio continuum maps to construct detailed statistical equilibrium and ionization equilibrium models of 34 compact H II regions located at galactocentric distances (Dg)0-12kpc. Our models simultaneously fit the observed IR fine-structure lines and high-resolution radio continuum maps.

galactic elements chemical evolution galaxy format↗

Predicted interplanetary distribution of Lyman-alpha intensity and polarization

Techniques to reduce the uncertainties in model calculations of the interplanetary distribution of Lyman-alpha polarization and intensity are identified. In particular, the applications of a scheme for mapping the degree of linear polarization from a spacecraft at various locations in the Solar System is discussed. A sample calculation of the sky distribution of both intensity and polarization is presented, on the basis of a variety of models for neutral hydrogen. It is found that the polarization distribution over the sky is significantly different from the intensity distribution, and that the maximum degree of polarization of the Lyman-alpha line increases with heliocentric distance from the spacecraft from 0 to about 18 percent at a distance of 20 AU. A schematic drawing is provided in order to illustrate the mapping scheme.

Ajello, J. M.↗

Forest Biomass Mapping From Lidar and Radar Synergies

The use of lidar and radar instruments to measure forest structure attributes such as height and biomass at global scales is being considered for a future Earth Observation satellite mission, DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice). Large footprint lidar makes a direct measurement of the heights of scatterers in the illuminated footprint and can yield accurate information about the vertical profile of the canopy within lidar footprint samples. Synthetic Aperture Radar (SAR) is known to sense the canopy volume, especially at longer wavelengths and provides image data. Methods for biomass mapping by a combination of lidar sampling and radar mapping need to be developed. In this study, several issues in this respect were investigated using aircraft borne lidar and SAR data in Howland, Maine, USA. The stepwise regression selected the height indices rh50 and rh75 of the Laser Vegetation Imaging Sensor (LVIS) data for predicting field measured biomass with a R(exp 2) of 0.71 and RMSE of 31.33 Mg/ha. The above-ground biomass map generated from this regression model was considered to represent the true biomass of the area and used as a reference map since no better biomass map exists for the area. Random samples were taken from the biomass map and the correlation between the sampled biomass and co-located SAR signature was studied. The best models were used to extend the biomass from lidar samples into all forested areas in the study area, which mimics a procedure that could be used for the future DESDYnI Mission. It was found that depending on the data types used (quad-pol or dual-pol) the SAR data can predict the lidar biomass samples with R2 of 0.63-0.71, RMSE of 32.0-28.2 Mg/ha up to biomass levels of 200-250 Mg/ha. The mean biomass of the study area calculated from the biomass maps generated by lidar- SAR synergy 63 was within 10% of the reference biomass map derived from LVIS data. The results from this study are preliminary, but do show the potential of the combined use of lidar samples and radar imagery for forest biomass mapping. Various issues regarding lidar/radar data synergies for biomass mapping are discussed in the paper.

Sun, Guoqing↗

Tsunami hazard map in eastern Bali

Bali is a popular tourist destination both for Indonesian and foreign visitors. However, Bali is located close to the collision zone between the Indo-Australian Plate and Eurasian Plate in the south and back-arc thrust off the northern coast of Bali resulted Bali prone to earthquake and tsunami. Tsunami hazard map is needed for better understanding of hazard level in a particular area and tsunami modeling is one of the most reliable techniques to produce hazard map. Tsunami modeling conducted using TUNAMI N2 and set for two tsunami sources scenarios which are subduction zone in the south of Bali and back thrust in the north of Bali. Tsunami hazard zone is divided into 3 zones, the first is a high hazard zones with inundation height of more than 3m. The second is a moderate hazard zone with inundation height 1 to 3m and the third is a low tsunami hazard zones with tsunami inundation heights less than 1m. Those 2 scenarios showed southern region has a greater potential of tsunami impact than the northern areas. This is obviously shown in the distribution of the inundated area in the south of Bali including the island of Nusa Penida, Nusa Lembongan and Nusa Ceningan is wider than in the northern coast of Bali although the northern region of the Nusa Penida Island more inundated due to the coastal topography.

58 GEOSCIENCES↗

Remote sensing and geophysical characterization of a floodplain-hillslope system in the East River watershed, Colorado

This package is part of the Watershed Function SFA Data Collection and contains remote sensing data and geophysical measurements acquired at the Pumphouse hillslope-floodplain site, in the East River, Colorado. The remote sensing dataset includes: a) a WorldView-2 (WV-2) pan-sharpened multi-spectral remote sensing image, and b) LiDAR derived products. The WV-2 image was acquired on September 24th, 2015, and it is composed of eight spectral bands (coastal, blue, green, yellow, red, red edge, NIR1, and NIR2) with a spatial resolution of 0.5 m, covering an area of 750x750 m. The LiDAR products are a digital surface model (DSM), representing the top-of-canopy elevation, and a digital terrain model (DTM), representing the bare-ground elevation, at the spatial resolution of 0.5 m. Such data are extracted from the LiDAR point-cloud dataset acquired over the entire watershed on August 2015 (http://dx.doi.org/10.21952/WTR/1412542). The geophysical dataset is composed of the electrical resistivity tomography (ERT) data acquired along a 158.75 m long transect, spanning the hillslope topographical gradient with 1.25 m electrode spacing. The dataset also includes soil water content measured with a TDR system. The package provides also polygons of different vegetation communities, which were used as reference data for mapping plant community distributions. The spatial polygons are based on plant locations acquired during the field campaign of June-July 2017 using an RTK DGPS system. The reference dataset is composed by 11 vegetation classes, namely, deciduous forest, evergreen forest, riparian shrubland, sagebrush, shrubland, potentilla, frasera, lupine meadow, veratrum, bunchgrass meadow, and forb, as well as four non-vegetation classes, such as water-river, water-lake, man-made, bare area, and shadow. The vegetation classes are determined based on distinct spectral and/or structural signatures of dominant species. The package includes products derived by these datasets, such as: a) a plant height map, computed by subtracting the DTM from the DSM, and b) a plant community distribution map, obtained by using a data-fusion machine-learning-based framework that exploit the WV-2 image and plant height information.

54 ENVIRONMENTAL SCIENCES↗

Informative Path Planning for Mapping Radiation

This project involves making measurements of contaminated areas using portable radiation detectors and small robots. Tasks involve operating detectors and small robots, combining data acquisition for the two systems, and automating the systems. The end result is a radiation map of contamination areas. Localization of radioactive sources and mapping of contamination distribution is essential when responding to emergencies, or when dealing with cleanup efforts. Radiation maps are used for situational awareness and for establishing a safe perimeter. However, it may be hazardous or impossible for humans to safely enter the site and survey the area. Informative Path Planning (IPP) is used to design a path for a robotic sensor platform to gather the most information about the radiation distribution while operating under the set of constraints given by the dynamics of the robot and other requirements such as minimizing the overall mission time. The key challenge for IPP is the tight coupling in multiple layers of decisions: Selection of locations to visit; Allocation of sensors to those locations; Processing of information gathered. Given a robot equipped with a basic gamma detector and Lidar sensor, how can we efficiently explore an unknown environment in such a way that we can satisfy the robot's constraints while simultaneously maximizing the accuracy of the map and minimizing the total runtime? This work presents a systematic procedure for IPP and environmental mapping that: Selects the best locations at which to sample; Finds the best path for robots; Estimates the measurement value at unknown locations using a Gaussian Process regression framework. Given a set of points where radiation measurements were taken, we are utilizing a Gaussian Process Regression with a Matern kernel to reconstruct the shape of the underlying ground truth. Mapping is done via the Robot Operating System's OpenSlam Gmapping package, which creates a 2D occupancy grid map. Simulated trials were run with a radiation source placed at random locations, and allowing the robot to select and move towards 20 samples at separate locations, as well as sampling along the path while moving. The simulated sensor model assumed an efficiency of 0.3, collection time of 1 second. Various weighting schemes were tested and compared. Quantitative evaluations often favored exploitation-heavy weighting schemes where μ was emphasized, with the Root Mean Squared Error (RMSE) quickly tending towards 2, whereas qualitative comparisons would favor exploration-biased schemes with greater weight on σ. The difference comes from operators often favoring knowing the general location of a source, rather than the exact properties of a source. Weighting of the path-length π often reduced the quality of the regression as less exploration occurred, however this may be deemed a worthwhile trade-off under certain circumstances, such as with sensitive robots. Successfully developed a methodology for informative path-planning for a robot to efficiently gather information and create a map of radiation. In the future, we would like to focus on: Hardware trials with integration of the robot platform and the IPP software; More refined sensor and environmental modeling; Multiple robot platforms.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Monomorphic Epithelial Proliferations of the Breast: A Possible Precursor Lesion Associated With Ipsilateral Breast Failure After Breast Conserving Therapy in Patients With Negative Lumpectomy Margins

Background: It is generally believed that ipsilateral breast failures (IBFs) after breast-conserving therapy (BCT) develop from incompletely eradicated carcinoma. We previously suggested that monomorphic epithelial proliferations (MEPs) in the breast may be a pool of partially transformed clones from which breast carcinomas can arise and that radiation therapy (RT) may also reduce the risk of IBF by eradicating MEPs. We examined salvage mastectomy specimens in patients experiencing an IBF to define the relationship between MEPs and IBFs and an additional potential mechanism for IBF risk reduction by RT. Methods and Materials: The location, number, and distribution of radiation changes and MEPs relative to 51 IBFs were mapped in salvage mastectomy specimens from BCT patients with adequately excised, initial carcinomas (negative lumpectomy margins). Results: All 51 salvage mastectomies had diffuse, late radiation changes. None had active fibrocystic lesions. MEPs were predominantly located in the immediate vicinity of the IBFs. A mean of 39% of MEP cases were located within the IBF, 46% were located within 2 cm of the IBF, and 14% were 2-3 cm from the IBF. Conclusions: MEPs appear to be a pool of partially transformed precursor lesions that can give rise to ductal carcinoma in situ and invasive carcinomas (CAs). Many IBFs may arise from MEPs that reemerge after RT. Radiation may also reduce IBF risk after BCT (including in patients with negative margins) by primarily eradicating MEPs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Simultaneous Localization and Mapping for Spacecraft Rendezvous and Proximity Operations Using Random Finite Sets

Future space missions require spacecraft to autonomously navigate non-cooperative environments for rendezvous and proximity operations (RPO). Current navigation filters used for RPO can have difficulty when optical sensors are used, due to complications with data association, high measurement uncertainty, and clutter. This paper provides an initial demonstration of the feasibility of using random finite set (RFS) filters for spacecraft relative navigation and pose estimation. Spacecraft relative navigation is formulated as a simultaneous localization and mapping (SLAM) problem, in which an observer spacecraft seeks to simultaneously estimate the location of features on a target object or spacecraft as well as its relative position, velocity and attitude. Simulated flash LIDAR measurements are processed using a Gaussian Mixture Probability Hypothesis Density (GMPHD) filter embedded in a particle filter to obtain a feature map of a target and a relative pose estimate between the target and observer over time. Results show that an RFS-based filter can successfully perform SLAM in a spacecraft relative navigation scenario.

David E Gaylor↗

MAPPING DIFFERENTIAL REDDENING IN THE INNER GALACTIC GLOBULAR CLUSTER SYSTEM

A serious limitation in the study of many globular clusters-especially those located near the Galactic center-has been the existence of large and differential extinction by foreground dust. In a series of papers, we intend to map the differential extinction and remove its effects, using a new dereddening technique, in a sample of clusters in the direction of the inner Galaxy, observed using the Magellan 6.5 m telescope and the Hubble Space Telescope. These observations and their analysis will let us produce high-quality color-magnitude diagrams of these poorly studied clusters that will allow us to determine these clusters' relative ages, distances, and chemistry and to address important questions about the formation and the evolution of the inner Galaxy. We also intend to use the maps of the differential extinction to sample and characterize the interstellar medium along the numerous low-latitude lines of sight where the clusters in our sample lie. In this first paper, we describe in detail our dereddening method along with the powerful statistics tools that allow us to apply it, and we show the kind of results that we can expect, applying the method to M62, one of the clusters in our sample. The width of the main sequence and lower red giant branch narrows by a factor of two after applying our dereddening technique, which will significantly help to constrain the age, distance, and metallicity of the cluster.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of remote sensing techniques to the geology of the bonanza volcanic center

A program is reported for evaluating remote sensing as an aid to geologic mapping for the past four years. Data tested in this evaluation include color and color infrared photography, multiband photography, low sun-angle photography, thermal infrared scanner imagery, and side-looking airborne radar. The relative utility of color and color infrared photography was tested as it was used to refine geologic maps in previously mapped areas, as field photos while mapping in the field, and in making photogeologic maps prior to field mapping. The latter technique served as a test of the maximum utility of the photography. In this application the photography was used successfully to locate 75% of all faults in a portion of the geologically complex Bonanza volcanic center and to map and correctly identify 93% of all Quaternary deposits and 62% of all areas of Tertiary volcanic outcrop in the area.

Marrs, R. W.↗

Synthesis maps of ultraviolet observations of neutral interstellar gas

Copernicus and IUE measurements of neutral hydrogen column densities have been taken for about 140 stars distributed between 10 and 3000 pc from the sun and plotted in several maps to directly yield estimates of contours of neutral hydrogen column density in the 5-500 x 10 to the 17th/sq cm range. These maps show that low column density neutral hydrogen is asymmetrically distributed around the sun with a 'hole' in the neutral hydrogen located in the third quadrant. This distribution mirrors that of nearby B stars associated with the Gould belt. The maps clearly show the directions in which observations at wavelengths less than 912 A will be most successful.

Frisch, P. C.↗

Data-Driven Method for Groundwater-Level Mapping and Monitoring-Well Network Optimization at Hanford

This report summarizes the initial results and outcomes of a physics-informed, data-driven groundwater level (GWL) mapping capability for the Hanford Site. GWL mapping at Hanford is typically conducted annually and requires a significant amount of computational and expert resources, and it does not allow assessment of the informational value of specific monitoring wells. The proposed method produces spatially and temporally resolved fields consistent with sparse, irregularly sampled, and nonuniformly distributed well measurements. Implemented successfully, this capability will allow rapid mapping of groundwater levels and provide an opportunity to optimize monitoring activities (both location and sampling frequency) based on data information value evaluation. The approach integrates a diffusion-based generative model – trained on MODFLOW simulation data from the Plateau-to-River (P2R) model – with score-based data assimilation (SDA), allowing observation-conditioned mapping without retraining for each monitoring-network layout.

54 ENVIRONMENTAL SCIENCES↗

Modeling spatial patterns in soil arsenic to estimate natural baseline concentrations

ABSTRACT Arsenic in soil is an important public health concern. Toxicity guidelines and models based on laboratory studies (i.e., U.S. EPA’s Integrated Risk Information System) should consider natural soil As concentrations to avoid unnecessary remediation burdens on society. We used soil and stream sediment samples from the USGS National Geochemical Survey database to assess the spatial distribution of natural As in a 1.16E+5 km2 area. Samples were collected at 348 soil and 144 stream locations, providing approximately one sample for every 290 km2. Sample sites were selected to minimize the potential influence of anthropogenic inputs. Samples were processed using acid digestion of whole samples (concentrated HCl and ascorbic acid) and concentrations were measured using hydride-generation atomic absorption spectrometry. Soil As ranged from 2.0 to 45.6 mg kg-1. Geostatistical techniques were used to model and map the spatial variability of As. The mean and variance at unsampled locations were estimated using sequential Gaussian simulation. Five areas of elevated concentration (> the median of 10 mg kg-1) were identified and the relationships to geologic parent materials, glacial sedimentation patterns, and soil conditions interpreted. Our results showed As concentrations >10 mg kg-1 were common, and >20 mg kg-1 were not unusual for the central and west central portions of Ohio (USA). In contrast, concentrations <4 mg kg-1 were rare. Measured concentrations typically exceeded the soil As human generic screening levels of 0.39 mg/kg (1); the calculated value that corresponds to a cancer risk level of 1 in 1,000,000 for soil ingestion. Because the As content of Ohio soils is similar to many world soils, the USEPA generic soil screening level of 0.39 mg/kg is of little utility. A more useful and practical approach would be the uses of natural background levels. Regional soil As patterns based on geology and biogeochemistry and not political boundaries should be used for soil screening and other risk assessment determinations.

arsenic, background, mapping, geostatistics, toxic↗

Large-eddy simulations for hill terrains: validation with wind-tunnel and field measurements

Development and validation of large-eddy simulation (LES) framework to study atmospheric boundary layer flows over complex terrains is reported here. The LES model uses the fourth-order time-accurate Runge–Kutta scheme and a fractional step method. The inflow boundary conditions are generated by using the so-called recycling (or mapping) technique. Evaluation of potential in-land wind park locations is the main application of the validated model. In this work, LES are carried out for turbulent boundary-layer flows over both simple and complex hill geometries. The prediction of the flow separation and reattachment length for a steeper wind-tunnel hill was closer to the measurements than previous numerical studies reported by other authors for the same hill geometry. For the complex hill case, the LES model showed good agreement with full-scale measurements.

97 MATHEMATICS AND COMPUTING↗

First Simultaneous Observation of STEVE and SAR Arc Combining Data From Citizen Scientists, 630.0 nm All‐Sky Images, and Satellites

Abstract On September 28, 2017 citizen scientist observations at Alberta, Canada (51°N, 113° W) detected aurora and a thin east‐west purplish arc, known as strong thermal emission velocity enhancement (STEVE) that lasted less than 20 min. All‐sky imagers at subauroral latitudes measured stable auroral red (SAR) arcs during the entire night. The imager at Bridger, MT (45.3°N, 108.9°W) also measured a STEVE. The overlapping geometry allowed to determine that the height of STEVE was 225–275 km. STEVE is brighter in the 630.0 nm images in the West and almost merges with the SAR arc in the East. A DMSP satellite pass in the southern hemisphere was at the conjugate location of the Bridger imager during the STEVE observation. When mapped into the northern hemisphere intense subauroral ion drift and subauroral polarization streams were detected associated with the two optical signatures measured in 630.0 nm.

Martinis, C.↗

Efficent XAI Information Saliency Tool

This software is an implementation which is described in: "Efficient Saliency Maps for Explainable AI" (https://openreview.net/forum?id=ryxf9CEKDr). The toolkit is located in: https://mybitbucket.llnl.gov/projects/SAL/repos/smoe_lovi/browse. It is a set of of PyTorch related python scripts for extracting the what parts of an image are most salient to a deep neural network in an efficient manner. This source will allow one to replicate the results in the paper referenced above. Is there

MUNDHENK, TERRELLN↗