Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “improved engine efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Replacing N-methyl-2-pyrrolidone (NMP) with water for processing of lithium-ion battery (LIB) electrodes has both cost and environmental benefits, which include reduced drying time, lower dryer capital cost, elimination of NMP recovery capital equipment, and no release of volatile organic compounds (VOCs) into the environment. However, aqueous-processed thick cathodes (≳4 mAh/cm 2 ) typically exhibit detrimental cracking during drying that is not observed for the NMP-based counterpart. The reasons for cracking of these water-based thick electrodes are still not well understood due to the complex nature of the colloidal dispersions used in the LIB electrode processing steps. In this work, the contributions of various factors responsible for cracking are discussed. We show that eliminating hydrogen evolution due to corrosion of the aluminum current collector eliminated the majority of the cracks regardless of the coating thickness, identifying the gas evolution as the primary reason for electrode cracking. Some secondary cracks and pinhole-type defects remained after addressing the aluminum current collector corrosion, which are thought to be caused by an inferior binding network formed by carbon black and binder in aqueous-processed cathodes compared to those processed with NMP. The thick aqueous processed cathodes are not able to sufficiently withstand the drying stresses without crack formation. We demonstrate reduction of these secondary defects by either improving the binding network or by reducing the drying stress. The former was achieved by replacing carbon black with vapor grown graphite tubes (VGGTs) that caused a more efficient utilization of the emulsion binder. Here, the latter was achieved by adding a small amount of IPA as a co-solvent that has been shown to reduce capillary stresses.

25 ENERGY STORAGE↗
DOE OSTI2021

Hybrid Imitation Learning for Real-Time Service Restoration in Resilient Distribution Systems

Self-healing capability is a critical factor for a resilient distribution system, which requires intelligent agents to automatically perform service restoration online, including network reconfiguration and reactive power dispatch. Here, the article proposes the imitation learning framework for training such an agent, where the agent will interact with an expert built based on the mixed-integer program to learn its optimal policy, and therefore significantly improve the training efficiency compared with exploration-dominant reinforcement learning (RL) methods. This significantly improved training efficiency makes the training problem under N-k scenarios tractable. A hybrid policy network is proposed to handle tie-line operations and reactive power dispatch simultaneously to further improve the restoration performance. The 33-bus and 119-bus systems with N-k disturbances are employed to conduct the training. The results indicate that the proposed method outperforms traditional RL algorithms such as the deep-Q network.

42 ENGINEERING↗
DOE OSTI2020

Physical and hydrodynamic properties of deep sea mining-generated, abyssal sediment plumes in the Clarion Clipperton Fracture Zone (eastern-central Pacific)

The anthropogenic impact of polymetallic nodule harvesting in the Clarion-Clipperton Fracture Zone is expected to strongly affect the benthic ecosystem. To predict the long-term, industrial-scale impact of nodule mining on the deep-sea environment and to improve the reliability of the sediment plume model, information about the specific characteristics of deep-sea particles is needed. Discharge simulations of mining-related fine-grained (median diameter ≈ 20 µm) sediment plumes at concentrations of 35–500 mg L –1 (dry weight) showed a propensity for rapid flocculation within 10 to 135 min, resulting in the formation of large aggregates up to 1100 µm in diameter. The results indicated that the discharge of elevated plume concentrations (500 mg L –1 ) under an increased shear rate (G ≥ 2.4 s –1 ) would result in improved efficiency of sediment flocculation. Furthermore, particle transport model results suggested that even under typical deep-sea flow conditions (G ≈ 0.1 s –1 ), rapid deposition of particles could be expected, which would restrict heavy sediment blanketing (several centimeters) to a smaller fall-out area near the source, unless subsequent flow events resuspended the sediments. Planning for in situ tests of these model projections is underway.

42 ENGINEERING↗
DOE OSTI2023

Modification of CO 2 /H 2 O selectivity of polymer for carbon capture materials

Today, the atmospheric carbon dioxide (CO 2 ) concentration is 421ppm, over one hundred ppm higher than it was at any point in the last 800,000 years (NASA, 2023). Multiple strategies are necessary to reduce the presence of carbon dioxide in the atmosphere. Besides limiting CO 2 output, carbon capture technology is essential to reduce the overall amount of CO 2 . The Microencapsulated CO 2 Sorbents (MECS) team at Lawrence Livermore National laboratory has developed technologies that can capture CO 2 inside microcapsules, where it can be temporarily stored and later released. In 2017, the commercial potential of these microcapsules was recognized. The brewing industry only requires about one third of the CO 2 it releases for carbonization and packaging, which Congwang Ye and Lionel Keene learned when they met with leaders of small breweries in Colorado to discuss employing carbon capture microcapsules in their processes to reduce their carbon footprint and production costs (Thomas, 2017). The breweries were interested in the technology, but the existing microcapsules require hydration, which is an expensive process for small brewers. In order to develop the microcapsules so they can be commercialized, it is essential to reduce their water loss to improve efficiency and reduce costs for the customers. One method to resolve this issue is to alter the membrane formulation by adding a material that is known to be hydrophobic to decrease the water permeability of the entire membrane. The goal of this project was to study the effect of dispersing a nanomaterial in the polymer membrane shells of microcapsules on the water vapor and carbon dioxide permeability of the membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

ChIMES: A Machine-Learned Interatomic Model Targeting Improved Description of Condensed Phase Chemistry in Energetic Materials

In this report we detail completion of a Physics and Engineering Model Level Two Milestone targeting improved reactive interatomic potentials (IAPs) for energetic materials (EM) through machine learning. The specific goals of this milestone were to develop, validate, and document a new reactive molecular dynamics method for EM, based on machine learning by (1) generating databases of first-principles-derived forces, stresses, and energies for HN3 and 3,4-bis(3-nitrofurazan- 4-yl)furoxan (DNTF) (2) generate atomistic force fields from these databases via ML, and (3) benchmark model performance against first principles calculations. These goals were achieved by (1) further developing a machine learned reactive IAP and generation approach (i.e. the Chebyshev Interaction Model for Efficient Simulation or “ChIMES”), for which resulting IAPs can approach the predictive power of quantum-mechanical approaches at a fraction of the computational expense, and (2) applying the ChIMES framework to develop models for HN3 and DNTF. We find that for simple energetic materials like HN3, high accuracy ChIMES models can be obtained through application of a fitting approach that does not use active machine learning. We demonstrate the suitability of ChIMES models for simulations involving EM by using the HN3 model in multiscale shock technique simulations to predict the HN3 Chapman-Jouguet detonation state and investigate chemical evolution out to 1 ns following shock compression. This model is then used in larger direct shock (DS) simulations for a preliminary investigation of how bubbles (i.e. voids) influence material response under shock compression. We find that more complex EM (i.e. DNTF) necessitate a more sophisticated fitting approach, and develop a new active learning method and python tool to meet this challenge. We demonstrate that this fitting approach yields ChIMES models that out-perform commonly used standard reactive IAPs as well as semi-empirical quantum methods, and discuss the systematic improvability of these actively learned ChIMES models. We also describe challenges related to model development for EM such as DNTF, for which few experimental or previous simulation data are available (e.g. which could otherwise inform generation of training data). To overcome this issue, we establish a semi-empirical quantum ChIMES capability which can be used to efficiently map out relevant thermodynamic and configurational space, and generate ChIMES-IAP training data in a multiscale manner. We also show that these semi-empirical quantum ChIMES models can be used to generate predictions for the shock Hugoniot (the Hugoniot is the locus of thermodynamic states found in a shocked material) equation of state, investigate related thermochemistry, and explore carbon condensation following shock compression. This work represents a substantial advance in our atomistic modeling capability for EM that will provide much needed information on the chemistry of detonation for continued development of continuum models based on the Cheetah thermochemical code.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Overview and technology opportunities for thermochemically-produced bio-blendstocks

Global demand for transportation fuels is projected to increase 40% by 2040, and biomass-derived fuels (biofuels) play a crucial role in substituting fossil fuels and mitigating greenhouse gas emissions. Currently, biofuels are mainly consumed as blendstocks combined with petroleum-based fuels, and effective conversion technologies can address the quality challenges for offering standalone biofuels. Thermochemical conversion process is one of the most promising pathways among existing technologies for biofuel production. However, the major barriers are unwanted characteristics (e.g., thermal instability) of intermediate products, such as bio-oil, and required upgrading treatments for producing compatible fuels. Here, this study highlights the merits and critical challenges of thermochemical conversion and physicochemical upgrading technologies for bio-blendstock production from lignocellulosic biomass. The novelty of this study lies in potential directions for future research through both critical and systematic literature reviews, and the proposed intensified process for lignocellulosic-based fuel blendstocks production. It is concluded that recovery and fractionation strategies (e.g., quenching and stripping) can maximize process yields and add values in the efficient conversion pathways. Effective quenching can stop secondary free radical reactions and improve liquid yields over gas and solid yields. Stripping process can improve process yield, catalyst lifespan, and thermal stability. It is further concluded that physicochemical treatments are not as effective as thermochemical treatments, but have advantages of mild operating conditions and potential for integrated solutions in conjunction with other treatments.

09 BIOMASS FUELS↗
DOE OSTI2021

Multi-objective optimization of low-GWP mixture composition and heat exchanger circuitry configuration for improved system performance and reduced refrigerant flammability

The recently introduced hydrofluoroolefin (HFO) refrigerants, including R1234yf and R1234ze(E), have significantly lower global warming potentials (GWPs) than traditional hydrofluorocarbon (HFC) refrigerants like R410A. However, prior tests show that direct drop-in of pure R1234yf or R1234ze(E) into equipment designed for R410A results in a decrease in heat exchanger capacity and the system coefficient of performance. The primary reason is the lower in-tube heat transfer performance of R1234yf and R1234ze(E) compared with that of R410A. To address this issue, previous studies have mixed the mildly flammable HFC R32 with HFOs to improve system performance, with HFC R125 also added to suppress flammability. Previous studies selected compositions based on simple cycle analyses and did not consider modifications of the heat exchanger circuitry configuration to adapt to the new refrigerants. This study presents a novel multi-objective optimization approach to design a refrigerant composition that maximizes energy efficiency within flammability and GWP limits. The approach in this work simultaneously optimizes mixture composition and heat exchanger circuitry configuration. A case study on a rooftop unit indicates that, compared with mixture-only optimization, simultaneous optimization of mixture and heat exchanger circuitry yields a 5.9% improvement in cycle efficiency and a 48.6% reduction in refrigerant flammability with a GWP of 268. Circuitry optimization using refrigerants with different temperature glides shows that the larger the temperature glide is, the larger EER improvement is obtained. The results show that zeotropic blends with a large temperature glide are more sensitive to the refrigerant circuitry than pure refrigerants and may suffer significant performance degradation with subpar heat exchanger circuitry design. The proposed optimization approach is generally applicable to mixtures with any number of components. Using this approach to design a HVAC system can yield higher system efficiency within flammability and GWP constraints.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

CRISPR-Cas12a nucleases function with structurally engineered crRNAs: SynThetic trAcrRNA

Abstract CRISPR-Cas12a systems are becoming an attractive genome editing tool for cell engineering due to their broader editing capabilities compared to CRISPR-Cas9 counterparts. As opposed to Cas9, the Cas12a endonucleases are characterized by a lack of trans-activating crRNA (tracrRNA), which reduces the complexity of the editing system and simultaneously makes CRISPR RNA (crRNA) engineering a promising approach toward further improving and modulating editing activity of the CRISPR-Cas12a systems. Here, we design and validate sixteen types of structurally engineered Cas12a crRNAs targeting various immunologically relevant loci in-vitro and in-cellulo . We show that all our structural modifications in the loop region, ranging from engineered breaks (STAR-crRNAs) to large gaps (Gap-crRNAs), as well as nucleotide substitutions, enable gene-cutting in the presence of various Cas12a nucleases. Moreover, we observe similar insertion rates of short HDR templates using the engineered crRNAs compared to the wild-type crRNAs, further demonstrating that the introduced modifications in the loop region led to comparable genome editing efficiencies. In conclusion, we show that Cas12a nucleases can broadly utilize structurally engineered crRNAs with breaks or gaps in the otherwise highly-conserved loop region, which could further facilitate a wide range of genome editing applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Concentrated dual-cation electrolyte strategy for aqueous zinc-ion batteries

Rechargeable Zn-ion batteries are highly promising for stationary energy storage because of their low cost and intrinsic safety. However, due to the poor reversibility of Zn anodes and dissolution of oxide cathodes, aqueous Zn-ion batteries encounter rapid performance degradation when operating in conventional low-concentration electrolytes. Herein, we demonstrate that an aqueous Zn2+ electrolyte using a supporting Na salt at a high concentration is efficient to address these issues without sacrificing the power densities, cycling stability, and safety of zinc-ion batteries. We show that the high-concentration solute minimizes the number of free water molecules and the changes in the electronic state of the electrolyte. A combination of experimental and theoretical investigations reveals that a unique interphase, formed on the Zn anode, enables reversible and uniform Zn plating. Utilizing a cathode of sodium vanadate synthesized through a scalable strategy, the Zn–sodium vanadate battery with the concentrated bi-cation electrolyte shows improved cycling stability, decent rate performance, and low self-discharge. This work provides new insights on electrolyte engineering to achieve high-performance aqueous batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

High-Silicon Steel Strip by Single-Step Shear Deformation Processing

It is well known that Fe-Si alloys with Si content higher than in conventional electrical sheet steels (>3.2% Si) can make a significant impact in improving the efficiency of electrical motors if they are available in sheet/foil (strip) forms at suitable cost. While the magnetic and electrical attributes (e.g., resistivity, core loss) of these high-Si Fe alloys, of relevance to electrical motor core laminations, are known to be exceptional, the alloys have limited workability, making them difficult to produce consistently in sheet/foil (strip) forms. Current processing techniques such as rolling, while adequate for producing conventional electrical steel sheet, do have important disadvantages - large energy consumption and emissions, limitations in processing of low-workability alloys (e.g., high-Si content steels), large-scale plant infrastructure, and less than adequate capability to engineer sheet metals with specific microstructures (e.g., fine-grained) and crystallographic textures (e.g., shear textures). It is therefore of interest to have an alternative commercial process that can produce sheet/foil (strip) from high-Si Fe alloys and which can also overcome some of the deficiencies of current multistage strip processes. The goal of the present project was design and demonstration of a new energy-efficient pilot process for producing high-Si electrical steel strip of commercial widths and thickness, and with superior electrical and magnetic properties than current electrical steels (Fe-3.2% Si as benchmark). The applications domain for these steels is electrical motor core laminations. We have addressed this goal by accomplishment of the following specific objectives and tasks: a) Development of an Fe-4Si-4Cr alloy with electrical resistivity >80 μΩ-cm, induction flux density >1.48 T at 5000 A/m and core loss 35% lower than the benchmark 3.2% Si alloy. The alloy which meets DOE target specifications for motor core attributes was designed with the Si content controlled for the electrical properties and the Cr content tailored to meet material/process workability requirements. b) A unique machining-based deformation processing system was designed and scaled-up to produce strip of commercial width (25 mm to 150 mm) and thickness (up to 0.5 mm) from the Fe-4Si-4Cr alloy and other alloys of varied workability including copper, Al6061-T6 and naval brass. The key attributes of the machining-based strip production are deformation processing by concentrated simple-shear; single-step production of strip from ingot using compact machine infrastructure; strip surface finish of Ra 0.35 to 1 micrometer that is comparable/superior to that of rolled strip; discrete production of strip that can potentially be done at point of use; and controllability of strip mechanical/formability properties by deformation control. c) The electrical, magnetic, surface quality, mechanical, formability, and metallurgical properties/attributes of the machining-based strip were established by direct ASTM standard or equivalent measurement techniques. d) Punching characteristics of the strip in terms of load, edge quality and macro defects were similar to those of conventional 3.2% Si electrical steels. These punching characteristics are critical from a manufacturability perspective for motor/transformer core applications. e) A modeling framework for energy analysis of multistage rolling and the machining-based deformation processing has been established. Application of this modeling to the two strip-processes showed that the machining-based process requires significantly lower specific energy for processing, ~ 25% of that for rolling. The modeling framework can be adapted for a range of sheet-metal forming, bulk metal forming, and machining processes. It can be used to identify key parameters controlling process specific energy. f) A comparative analysis of advantages and disadvantages of machining-based processing against rolling for strip production. The single stage machining-based processing, with compact infrastructure, represents a new manufacturing paradigm for sheet and foil manufacturing that can potentially also be applied to advanced titanium, aluminum, copper and magnesium alloys. The goals and objectives were accomplished by a cross-disciplinary project team comprising of personnel from Purdue University; M4 Sciences LLC, a small-business focused on advanced manufacturing technology development; the Pacific Northwest National Labs; and tool manufacturers. The team is currently in advanced discussions with multiple entities for future process development for commercialization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Aging Mechanisms of Broad Area High-Power ~800nm Laser Diodes

Improved lifetime of high-power broad area laser diodes will enhance their utility for manufacturing, scientific, and medical laser systems. However, factors contributing to gradual degradation of diode laser performance are not fully understood. Here we study the aging mechanisms of ~800 nm aluminum-free laser diodes grown by solid-source MBE. Oxygen was intentionally introduced at three different concentration levels into the quantum well (QW) and waveguide (WG) at concentrations <5×10 15 cm -3 . Diode power, slope efficiency (SE th ), threshold current (I th ), and device parameters such as QW and WG lifetimes were measured at discrete time steps throughout the aging run. The data show that lasing characteristics prior to aging are degraded by oxygen introduction, but the gradual power degradation rate of ~5% over 500 hours at current density 1.74 kA/cm 2 does not change with oxygen concentration. Aging-induced changes in nonradiative lifetimes and threshold were observed for shorter aging times, but stabilized after ~100 hrs. and cannot explain the observed power degradation. This suggests that gradual degradation in these devices is not due to nonradiative recombination at low levels of point defects. The data shows that this degradation results primarily from changes in slope efficiency, and simulation of these results suggests that the power degradation arises from increased intracavity absorption (ICA). Efforts to slow ICA growth, instead of efforts to control low levels of nonradiative recombination centers, may be the most fruitful path forward to improve laser diode lifetime.

42 ENGINEERING↗
DOE OSTI2025

Studies as a function of different ALD capping layers on cavity losses for QIS and accelerators

Niobium-based bulk SRF cavities have demonstrated exceptional performance. To further improve niobium cavity performance, we present studies involving a novel surface engineering process designed to prevent the formation of amorphous niobium oxides on the surface. This is achieved by encapsulating the niobium surface using thermal Atomic-Layer-Deposition (ALD). This technique has been shown to enhance the properties of niobium cavities and 2D resonators. This study not only aims to improve SRF performance at high fields but also has the potential to enhance the quality factor in low-field regimes, particularly for quantum applications. For the method to be effective, it is essential to have a clean interface between the encapsulating layer and the bulk niobium. Achieving this requires a uniform coating across the entire cavity surface and efficient removal of the underlying niobium oxides. To optimize the process, a variety of material characterization tools have been utilized to refine parameters such as thin film thickness and annealing conditions. Cavity RF measurements were performed at the vertical test facilities at FNAL to assess the Q vs. Eacc curves for accelerator applications, as well as at the SQMS dilution refrigerators to investigate the full two-level system (TLS) losses at milliKelvin and single-photon levels. Based on the results, we characterized the loss of different oxides in various regimes and applications, comparing them to natural niobium pentoxide.

Grassellino, L. [Fermilab]↗
DOE OSTI2023

The role of international collaboration in the United States geologic disposal research program

Abstract. More than a decade ago, the United States disposal program discontinued all research activities focused on the unsaturated fractured tuff formation at Yucca Mountain as the geologic disposal site for spent fuel and high-level radioactive waste. A new research and development (R&D) program was initiated to provide a sound technical basis for alternative disposal options across clay, crystalline, and salt rocks. The goals of this broad program were (and still are) to (1) increase confidence in the robustness of generic disposal concepts, (2) develop the science and engineering tools needed to support disposal concept implementation, and (3) conduct R&D on the direct disposal of existing dual-purpose (storage and transportation) canisters. Recognizing the benefits of international collaboration toward the common goal of safely and efficiently managing the back end of the nuclear fuel cycle, the program emphasized international cooperation as an effective strategy for sharing information and knowledge. In a multi-laboratory effort coordinated by Lawrence Berkeley National Laboratory, the United States Department of Energy (DOE) program established formal and informal cooperation partnerships with several international initiatives and institutions and developed a number of collaborative R&D activities in important research areas, such as engineered barrier integrity, near-field perturbations, radionuclide transport, performance assessment, and methods for characterization and monitoring of engineered and natural barriers. This presentation gives an overview of these R&D activities, with a specific focus on activities that improve our current understanding of the coupled thermal–hydrological–mechanical–chemical (THMC) processes occurring in engineered and natural barriers. We start with a brief review of selected international collaboration initiatives and then describe a few specific collaboration projects. We focus specifically on such studies that use experimental data sets provided by international research cooperation for joint modeling work to increase confidence in performance-relevant predictions of coupled processes. Overall, the focus on international collaboration has allowed deep engagement of US researchers with the international waste management R&D community in terms of best practices, new scientific advances, state-of-the-art simulation tools, new monitoring and performance confirmation approaches, and lessons learned. The joint R&D with international researchers, worldwide sharing of knowledge and experience, and access to relevant data and experiments from a variety of host rocks have helped our researchers to significantly improve their understanding of the current technical basis for disposal in a range of potential host rock environments. International collaboration also provides ample opportunity for training and educating junior staff that are well suited to move the United States disposal research program forward into the next decades, a promising avenue for developing a next-generation workforce of disposal scientists.

Birkholzer, Jens T.↗
DOE OSTI2023

System efficiency and power assessment of the all-aqueous copper thermally regenerative ammonia battery

Thermally regenerative ammonia batteries (TRABs) use low-temperature (T < 100 °C) heat to provide stationary energy and power with higher power densities and efficiency relative to other waste heat devices. TRABs are an active area of research in waste heat devices, but currently there is little consensus on what aspect of the system is limiting TRAB performance and what maximum efficiencies are possible. Experiments and numerical models were used here to examine the sensitivity of the battery and distillation column in a TRAB system to key operating variables, thereby establishing practical limits and identifying focus areas for improving performance. Battery power was eight times more sensitive to ohmic losses than kinetic and mass transfer losses, regardless of the operating temperature, and the peak power density was simulated to be 18.8 mW cm –2 at 75 °C. Theoretical energy efficiency limits were defined for a series of ammonia concentrations and operating pressures, ranging from 5 – 12%, which is 2–3 times higher than previous experimental estimations. Atmospheric pressure column operation used a larger amount of waste heat compared to sub-atmospheric pressure. It is estimated that the volume of the battery would take up 9.2m 3 for every 1% of the power output of a natural gas turbine, but with realistic improvements to cell conductivity, the size would reduce to 2.5 m 3 . Finally, the results presented in this work will help streamline future development by focusing on minimizing ohmic losses and provide specific data for full system evaluation of future TRABs.

25 ENERGY STORAGE↗
DOE OSTI2025

Experimental investigation of air-fuel equivalence ratio effects on advanced dual-fuel ammonia/diesel combustion on a single-cylinder medium-duty diesel engine at high load

Ammonia (NH 3 ) has garnered significant interest as an alternative fuel for meeting international emissions reduction mandates in sectors with high weight and distance requirements, such as shipping. Technical barriers and unanswered questions remain on the combustion strategies that can maximize ammonia utilization and minimize emissions. Prior research studies at the US Department of Energy’s Oak Ridge National Laboratory have shown strong performance with NH 3 under dual-fuel mode using conventional diesel combustion (CDC) manifold air pressure settings. Diesel airflow was initially used to simplify retrofitting (no turbocharger modification), which resulted in air-fuel equivalence ratios (λ) greater than 1.5. To characterize potential improvements in dual-fuel NH 3 combustion performance at richer in-cylinder conditions, a global λ sweep compared the use of early (E-pilot) and late (L-pilot) single diesel injections. The experiments were conducted at 1200 RPM and 12.8 ± 0.2 bar (75 % load), and λ was varied by decreasing the commanded air flow to the engine at greater than 90 % ammonia energy substitution level. A diesel injection timing sweep was conducted for both the injection strategies at fixed λ, and the timing with the lowest engine-out N 2 O emissions was identified. The results indicated an optimal balance between CO 2,eq and thermal efficiency benefits both E-pilot and l-pilot injection strategy cases compared with CDC at a λ of 1.4. In conclusion, the indicated nitrogen-based emissions exhibited a strong correlation to the ratio of CA5–50 and ignition delay for l-pilot, but no apparent trend emerged for the E-pilot injection strategy at the tested boundary conditions.

Ammonia↗
DOE OSTI2021

Development of platforms for functional characterization and production of phenazines using a multi-chassis approach via CRAGE

Phenazines (Phzs), a family of chemicals with a phenazine backbone, are secondary metabolites with diverse properties such as antibacterial, anti-fungal, or anticancer activity. The core derivatives of phenazine, phenazine-1-carboxylic acid (PCA) and phenazine-1,6-dicarboxylic acid (PDC), are themselves precursors for various other derivatives. Recent advances in genome mining tools have enabled researchers to identify many biosynthetic gene clusters (BGCs) that might produce novel Phzs. Here, to characterize the function of these BGCs efficiently, we performed modular construct assembly and subsequent multi-chassis heterologous expression using chassis-independent recombinase-assisted genome engineering (CRAGE). CRAGE allowed rapid integration of a PCA BGC into 23 diverse γ-proteobacteria species and allowed us to identify top PCA producers. We then used the top five chassis hosts to express four partially refactored PDC BGCs. A few of these platforms produced high levels of PDC. Specifically, Xenorhabdus doucetiae and Pseudomonas simiae produced PDC at a titer of 293 mg/L and 373 mg/L, respectively, in minimal media. These titers are significantly higher than those previously reported. Furthermore, selectivity toward PDC production over PCA production was improved by up to 9-fold. The results show that these strains are promising chassis for production of PCA, PDC, and their derivatives, as well as for function characterization of Phz BGCs identified via bioinformatics mining.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A METHODOLOGY TO SUPPORT THE DEVELOPMENT OF A NEW STATE VISION FOR THE UNITED STATES NUCLEAR INDUSTRY

A new strategy in the way in which the United States nuclear power plants (NPPs) are operated, maintained, and supported is needed. One such strategy is to transform the NPP operating model through a business-driven approach that leverages technology to enable new capabilities that improve performance and reduce cost. This paper presents a methodology for developing an achievable yet transformative new state vision that ensures continued safe and efficient operations of the United States NPP fleet. This work builds on existing guidance and leverages previous research to comprehensively address both bottom-up (i.e., utility needs) and top-down (i.e., first principles) considerations important for developing a new state vision. The proposed methodology is intended to provide industry-wide guidance for developing a new state vision that leverages both the selected vendor’s capabilities in a way that meets the utility’s modernization goals while ensuring state-of-the-art systems engineering and human factors engineering principles are applied that promote overall plant safety, performance, and efficiency.

99 GENERAL AND MISCELLANEOUS↗