Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feasibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A preliminary investigation into the feasibility of laser ablation U–Pb isotope ratio measurement via all‐faraday cup detection with 10 11 ‐ and 10 13 ‐Ω amplifiers on the Neoma multicollector‐inductively coupled plasma‐mass spectrometer

Rationale Signal detection for uranium–lead (U–Pb) dating of zircon is typically performed via ion counters. Here, we develop a preliminary understanding of the strengths and limitations of faraday‐cup‐based detection. Methods A suite of zircon reference materials and the NIST‐610 glass were sampled using laser ablation followed by U–Pb isotope ratio measurement on a Neoma multicollector‐inductively coupled plasma‐mass spectrometer. Results We were able to produce geologically accurate 207 Pb/ 206 Pb, 206 Pb/ 238 U, and 207 Pb/ 235 U ratios for the NIST‐610 glass and the zircon standards, with ages ranging from ~2.5 Ga to ~337 Ma (TanBrown A, Oracle, 91550, Mud Tank, Temora, and Plešovice). Two of the younger zircon standards examined (94‐35, ~55.6 Ma, and Fish Canyon, 28.6 Ma) yielded accurate 206 Pb/ 238 U but not 207 Pb/ 235 U or 207 Pb/ 206 Pb ratios, whereas the youngest zircon standard (Penglai, ~4.4 Ma) failed for all three ratios of interest. The accuracy and precision of the all‐faraday method are directly tied to signal intensity, with reliable data capable of being produced even when both isotopes in a ratio have signals below ~0.001 V (equivalent to ~62 500 cps on an ion counter). Conclusion The all‐faraday cup multicollection method provides sufficient sensitivity to obtain geologically meaningful U–Pb data, with possible advantages being that laser pit depth‐dependent changes in the observed interelemental fractionation behavior may be easier to correct using a static collector configuration compared to when the ion beam is swept across a single detector while also removing the need for an interdetector‐type calibration. Further work is needed to refine the all‐faraday cup method (e.g., application of background subtraction and common Pb corrections, outlier removal, and interelement as well as down‐hole fractionation corrections), but our initial results demonstrate that the faraday detector method has sufficient sensitivity to warrant further study.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Feasibility of volumetric expansion of molten chlorides by conventional pushrod dilatometry

Abstract This study is a short communication on progress made in the adaptation of conventional push-rod dilatometry for the measurement of volumetric expansion of liquid salts up to 1300 K. A new crucible design is offered as a practical solution for measurement of liquid salts by this method. Proof-of-concept measurements of the volumetric expansion of sodium chloride (NaCl) are compared to the available data in literature. Measurement of the coefficient of thermal expansion (CTE) of solid NaCl compared favorably to the available data in literature, confirming both magnitude and trend. The average CTE of NaCl (solid) was $$\overline{\alpha }_{{{\text{NaCl}}\;{\text{Solid}}}} = 5.63 \cdot 10^{ - 5} {\raise0.7ex\hbox{$1$} \!\mathord{\left/ {\vphantom {1 K}}\right.\kern-\nulldelimiterspace} \!\lower0.7ex\hbox{$K$}}$$ α ¯ NaCl Solid = 5.63 · 10 - 5 1 K . The volumetric expansion of liquid NaCl was measured as $$\beta_{{{\text{NaCl}}\;{\text{Liquid}}}} \approx 3.96 \cdot 10^{ - 5} 1/K$$ β NaCl Liquid ≈ 3.96 · 10 - 5 1 / K and is essentially constant from the melt point to 1300 K. The volumetric expansion produced by this method is in reasonable agreement with the available published data and previous measurements made by the authors by neutron radiographic technique.

Parker, S. S. (ORCID:000000018597440X)↗
DOE OSTI2020

Calcium fluoride as a dominating matrix for quantitative analysis by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS): A feasibility study

Here, calcium fluoride formed by the reaction between ammonium bifluoride and calcium chloride was investigated as a dominating matrix for quantitative analysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Transformation from a solid sample to the calcium fluoride-based matrix permitted quantitative analysis based on calibration standards made from elemental standards. A low abundance stable calcium isotope, i.e. 44 Ca + , was monitored as the internal standard for quantitative analysis by LA-ICP-MS. Correlation coefficient factors for multiple elements were obtained with values over 0.999. The results for multiple elements in a certified reference material of soil (NIST SRM 2710a) agreed with the certified values in the range of expanded uncertainty, indicating the present method was valid for quantitation of elements in solid samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Feasibility of enhancing carbon sequestration and stock capacity in temperate and boreal European forests via changes to management regimes

Forest management practices might act as nature-based methods to remove CO 2 from the atmosphere and slow anthropogenic climate change and thus support an EU forest-based climate change mitigation strategy. However, the extent to which diversified management actions could lead to quantitatively important changes in carbon sequestration and stocking capacity at the tree level remains to be thoroughly assessed. To that end, we used a state-of-the-science bio-geochemically based forest growth model to simulate effects of multiple forest management scenarios on net primary productivity (NPP) and potential carbon woody stocks (pCWS) under twenty scenarios of climate change in a suite of observed and virtual forest stands in temperate and boreal European forests. Previous modelling experiments indicated that the capacity of forests to assimilate and store atmospheric CO 2 in woody biomass is already being attained under business-as-usual forest management practices across a range of climate change scenarios. Nevertheless, we find that on the long-term, with increasing atmospheric CO 2 concentration and warming, managed forests show both higher productivity capacity and a larger potential pool size of stored carbon than unmanaged forests as long as thinning and tree harvesting are of moderate intensity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Probabilistic feasibility assessment of sequestration reliance for climate targets

Countries worldwide are transforming their energy systems to achieve Carbon-Neutrality. Investing in renewable resources-based technologies and implementing Carbon Capture and Storage (CCS) are common strategies to achieve higher sequestration levels. Negative emissions through Bioenergy with CCS are expected to play an essential role in the transition to full decarbonization. On top of that, biomass is a limited resource that depends on environmental factors, which create uncertainties related to the amount that can be sustainably provided to the energy system. Here this study emphasizes the relevance of variability in carbon sequestration for achieving climate targets by 2050. Here this paper proposes a probabilistic approach that integrates the Global Change Analysis Model for Latin America (GCAM-LA) with a chance constraint approach. GCAM-LA is used to assess the impact on the energy sector of different limits of sustainable biomass and carbon budget scenarios. The risk associated with exceeding the sequestration capacity of a given region is modeled via Chance Constraint. Results show that electrification is an appropriate long-term decarbonization strategy. It smoothes the effects of uncertainty in sequestration capacity and responds to end-user demands. For this case study, higher levels of electrification are obtained at likelihood levels >66% for end-use sectors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Investigating feasible light configurations for fish restoration: an ethological insight

Light environment significantly impacts the effectiveness of fish population restoration in developed watersheds, subserving fish passage reconstruction in hydraulic complex and habitat rehabilitation. To develop an interior connection between light-related fish response from the laboratory and field fish conservation practice, we employed a new indexing system, consisting of phototaxis rate, relative swimming speed (RSS), and optic evasion coefficient (OEC), to quantify the light-induced behaviors in Ptychobarbus kaznakovi, a representative rare cyprinid in Tibet, China, at four experimental illuminance levels (15 lx, 30 lx, 60 lx, 120 lx) and four wavelengths (red, yellow, green, blue). The fish showed negative phototaxis at all given illuminances and wavelengths. Under red light, the OEC increased significantly from 0.642 at 15 lx to 0.782 at 30 lx (P = 0.029), while the RSS decreased significantly from 3.752 to 2.383 (P < 0.001). Behaviorally, the fish shifted from sprint to wandering around, indicating the alteration of dominant physiological activity from behavioral stress response to negative phototaxis. Under the green treatment, P. kaznakovi swam around quickly and presented slight negative phototaxis, and OEC values were uniform among all illuminances, probably because of the similarity of green light to the ambient color of the habitat. Accordingly, ecologists and fisheries practitioners can utilize red light to exclude fish from dangerous waters and green light to guide them to ideal habitats, laying the necessary groundwork for the light-driven fish recovery effort. Furthermore, the appropriate light configuration can yield economic benefits through the tradeoff among fish protection, power generation, and investment costs.

Lin, Chenyu↗
DOE OSTI2024

Feasibility study for test rig assessments of fish passage conditions in a Kaplan turbine

The assessment of fish passage conditions in hydroelectric turbines consists of identifying and quantifying physical magnitudes leading to increased risks of injury of fish passing through turbines in operation. Such assessments are usually carried out either with the use of computer-based methods during design or with field testing of live fish and sensors passing through prototypes. A method in between consists of test rig experimentation, which is critical for testing fish-focused design concepts and offers the opportunity for implementing the most effective design measures for improved fish survivability. However, fish-related assessments in test rigs are not sufficiently documented for industrial applications. This work presents the main findings of an experimental campaign to quantify fish-related hydraulic magnitudes in a physical model of a Kaplan turbine in a commercial test rig. Two operating conditions were tested by releasing miniaturized autonomous sensor devices (termed Sensor Fish Mini) at the turbine intake flow, passing them through the runner in motion and recovering them at the draft tube exit. During passage, time series of acceleration, absolute pressure and rotational velocity were recorded. The recordings were then interpreted to determine the magnitude and likely location of hydraulic stressors hazardous to fish. The statistical tests on the reported measurements indicated that low pressure, collisions on the runner and rotations in the draft tube were not different between the two tested operating points. On the other hand, pressure drop and collision rates on the distributor differed considerably as a function of net head. The outcomes of this investigation showed that test rig evaluations of fish-related properties with Sensor Fish Mini can contribute to an evidence-based development of turbine geometries designed for providing safer passage conditions. Future work will investigate the scaling of test rig measurements to hydraulically equivalent magnitudes in the prototype and their biological consequences.

13 HYDRO ENERGY↗
DOE OSTI2022

Feasibility of critical infrastructure protection using network functions for programmable and decoupled ICS policy enforcement over WAN

Industrial control systems (ICS) represent a major component of our critical infrastructure. With the increasing need for more control and monitoring of such systems, ICS have seen an increase in connectivity to wide area networks (WAN) exposing aging equipment to rapidly evolving cybersecurity threats. Furthermore, the ICS data requires a reliability measure from the networks for critical functions for infrastructure monitoring and control. Especially when remote plant sites are involved such as pipelines, energy distribution networks, and transportation, WAN transport impairments most often provide a best effort delivery with no strict reliability guarantees. Network functions can provide a vendor agnostic, programmable critical infrastructure protection with a single maintenance, policy determination, and reliability assurance surface. A network function (NF) can be utilized for policy enforcement over the communication between remote entities and the main control office. This paper presents the research on transparent integration with existing ICS without disrupting communications, resulting in minimal downtime while decoupling the fast paced evolution of defensive security measures from the upgrade cycle of expensive long term hardware. We report our measurements on the resource requirements and overhead in the network for successful NF insertion under a wide variety of network impairments (network packet delay, reordering, and loss). Our paired NF implementation provides a policy enforcement platform extensible to cover myriad cybersecurity-related communication goals, including packet signing for verification, encryption for data privacy, packet filtering and data diode operation (i.e. protecting against eavesdropping, packet injection, and denial-of-service). Furthermore, bundling communication specifications into packet flows allows for tunability in applying policies as coarse- or fine-grained as the needs of the operator. We report on network function resource requirements in the form of required queue depth and network utilization overhead to inform the decision making against hardware cost constraints.

42 ENGINEERING↗
DOE OSTI2023

Feasibility of FDEM cross-dipole and TDEM loop sources for monitoring CO 2 at the Kemper CarbonSAFE site

Electromagnetics has been shown to be a viable tool to monitor CO 2 plumes embedded in saline reservoirs. However, the majority of studies focus on measuring the electric field, which requires cumbersome equipment in the field and it is difficult to install permanent measurement stations. Magnetic field receivers offer an opportunity to reduce the form factor of the survey and increase the mobility by utilizing upcoming technologies, such as drones. We explore the use of frequency-domain electric dipole sources, and timedomain loops with a focus on measuring the secondary magnetic field at the surface for a conceptual injection scenario based on the Kemper CarbonSAFE site. We find that electric dipole sources give a response above the sensitivity of current sensor technology and, therefore, be a viable tool for CO 2 monitoring. The time domain loop source does provide fields that are useful for determining the location of the CO 2 plume, however the field magnitude is below the sensitivity of the current generation of instruments. To explore the use of a potential borehole receiver we generate a map of the magnetic field at depth to explore potential borehole placement for monitoring efforts. Finally, we limit the spatial extent of the electric dipole survey to a single parcel of land to help understand how the fields change with survey geometry. We find that the shape of the secondary fields change slightly with the small transmitter, but are still measurable provided that the cultural noise at the site is low. Thus, we conclude that at the Kemper site a frequency-domain cross-dipole source with magnetometer receivers is suitable to monitor the expansion of the CO 2 plume in the saline reservoir, even with a limited transmitter footprint on the surface.

58 GEOSCIENCES↗