SEARCH · Engineering Papers

Results for “fast neutron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Impulse response measurements of fast scintillator-based current mode detectors

In this study, experimental measurements were performed to characterize the impulse response of seven different gamma ray detector prototypes being considered to be fielded as a current mode diagnostic for neutron-diagnosed subcritical experiments at the Nevada National Security Site (NNSS). For such experiments, the impulse response of the fielded detector is required to have a full-width half-maximum (FWHM) of approximately 5 ns or less and a low amplitude tail. Each of the detector prototypes evaluated in this work were selected based on the potential to meet this performance requirement. An impulse of bremsstrahlung x-rays created from 2 MeV electrons from the NNSS’s Transformational Diagnostics and Imaging, Los Alamos, linear accelerator was measured with each detector. The measured impulse response was evaluated for each detector configuration. A comparison of these impulse responses revealed a relationship between fast timing performance and scintillator material, geometry, surface reflectivity conditions, and photomultiplier tube (PMT) selection. The detector configuration yielding an impulse response with the shortest FWHM of 3.82 ± 0.11 ns and possessing a low amplitude tail was a 5-inch (12.7-cm) diameter, 5-inch (12.7-cm) height cylindrical EJ-399-17-VI liquid scintillator in a black-painted housing coupled to an Adit D798B 5-inch (12.7-cm) PMT by means of a 0.079-inch (0.2-cm) EJ-560 optical coupling pad.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Universality of Collective Density Fluctuations in Liquids at and away from Equilibrium – An Integrated Neutron Scattering, Theoretical, and Computational Study (Final Technical Report)

Liquids, ubiquitous on earth, are prototypical disordered condensed matter. As the mediate phase between non-structured gases and ordered solids, liquids p ossess intriguing complexities that are absent on either extreme counter phase, especially when they are driven away from equilibrium. Despite decades of studies, the physics of liquids still keeps surprising us and challenges our understanding of condensed matter, emergent phenomena, and complex systems. Among the many interesting properties, the nature of collective dynamics in liquids remains elusive because of both the presence of strong interactions and the absence of translational invariance. This project studied the universal features of collective density fluctuations (or collective modes), which include both phonon-like excitations and collective relaxations, in the Q-dependent generalized hydrodynamic regime in liquids and liquid-like matter both at and away from equilibrium. We performed systematic studies of the fast collective dynamics (including both phonon-like excitations and collective relaxations) of four classes of liquids characterized by different fragilities and interactions using synergistically integrated coherent neutron scattering experiments (Inelastic Neutron Scattering (INS), Quasi-Elastic Neutron Scattering (QENS), and Neutron Spin Echo (NSE)), a ViscoElastic Hydrodynamics theory we have been developing, andMolecular Dynamics (MD) simulations and our analysis package LiquidLib. The transformative knowledge of the collective dynamics in liquids is important to understand and ultimately control the transport of mass, energy, and charge in liquids, both at and away from thermal equilibrium, which may will likely impact a wide range of disciplines.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Embedding Neural Thermal Scattering (NeTS) Modules in SERPENT for Higher Fidelity Advanced Reactor Analysis

When a neutron born in fission thermalizes to the order of $k$ $B$ $T$, it’s de-Broglie wavelength and energy approach the order of inter-atomic spacing and elementary lattice oscillations, respectively. $S$($a,β,t$) or the scattering law, uuantify these temperature-dependent crystallographic contributions to total cross section (or reaction rate). In a Monte Carlo analysis, cumulative distribution functions (CDFs) of $S$($a,β,t$) are loaded to memory from “A Compact ENDF” (ACE) files for stochastically selecting thermal scattered neutron trajectories. In this work, novel neural thermal scattering (NeTS) modules for $S$($a,β,t$) CDFs are designed, trained, serialized and embedded within SERPENT using Python’s limited C-API for on-the-fly deployment of crystalline graphite $S$($a,β,t$) sampling. Torchscript tracing and Numba just-in-time (JIT) compilation streamline neural inference on NVIDIA GPUs with CUDA libraries. Demonstrations of bare sphere thermalization of fast and thermal sources show excellent agreement between embedded NeTS in SERPENT and MCNP. With an explicit model of the reactor, NeTS can predict on-the-fly changes in TREAT neutron spectra as a function of local temperature, which can serve to improve transient and accident predictions in a multiphysics analysis framework. This framework can be further extended to account on-the-fly for changes in local graphitic microstructure to scattering cross sections, and outlines a novel coupling of modern machine learning with state-of-the-art reactor physics methods.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Fast ion studies in the extended high-performance high β P plasma on EAST

Comprehending and optimizing fast ion behaviors is critical for the enhancement of performance in Experimental Advanced Superconducting Tokamak (EAST). This study explores the potential benefits of several factors that can improve the fast ion confinement. First, experiments show the change in the direction of the NBI2 from counter-I p to co-I p leads to a significant reduction in fast ion losses. TRANSP/NUBEAM simulation and tomography results based on fast-ion D-alpha measurements reveal that after the neutral beam injection (NBI) upgrade, the beam ion prompt loss is reduced by approximately 50%. Second, the upgraded ion cyclotron resonant frequency (ICRF) antenna at the N-port features twice the coupling resistance of the original antennas at EAST. This improved ICRF power coupling has enhanced the synergistic heating effect of NBI + ICRF, where the ICRF wave field accelerates beam ions at the harmonics. Experiments demonstrate that NBI + ICRF synergistic not only enhances plasma neutron yield and β P , but also accelerates beam ions to hundreds of keV. Further, the electron density and the neutral beam voltage have been optimized to reduce the fast ion slowing-down time and beam ion losses. Experimental and simulation results indicate that increasing the electron density reduces beam ion losses and enhances the bootstrap current fraction. While higher beam voltage results in a slight decrease in beam power absorption, it can increase the fraction of bootstrap current. With the understanding of these optimization of fast ion confinement, experiments have demonstrated fully non-inductive operation at high density (n e /n G ∼ 0.67, β P ∼ 3.1, β N ∼ 2.1, H 98,y2 ∼ 1.2) even without the support of co-I p beam NBI2. This investigation presents a potential regime to enhance fast ion confinement and extend performance in the high β P plasma for future experiments.

EAST tokamak↗

DOE OSTI2022

Fast modular reactor nuclear design parameters of fuel cycle and power distributions

This paper describes conceptual design of a 112 MW thermal (50 MW electric) Fast Modular Reactor (FMR) system operating at 7 MPa with inlet/outlet temperatures of 509/800 Celsius degrees. The reactor system includes the reactor core, fuel assemblies, fuel rods, reactor internals, reflector, neutron control system, flow control, and structural components. The nuclear design and analysis were conducted to search for a baseline core with a cycle length greater than 8-year and the power peaking factor less than 1.5 by adjusting the fuel assembly, reactor core, and reflector configurations. The neutron transport calculations of the baseline core showed that a refueling interval of 9-year is achieved with a total peaking factor of 1.47 and a fuel rod average linear power of 3.6 kW/m. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2023

The Legendre Polynomial Axial Expansion Method

This work presents a new formulation of the axial expansion transport method explicitly using Legendre polynomials for arbitrarily high-order expansions. This new formulation also features an alternative method of axial leakage calculation to allow for nonextruded flat source region meshes. This alternative axial leakage is introduced alongside a balance equation requirement to ensure that neutron balance is preserved in the coarse mesh for a given axial leakage formulation, which allows for effective coarse mesh finite difference acceleration. A matrix exponential table method is derived to allow for fast computations of arbitrarily high-order matrix exponentials for this work and precludes the need for further research into matrix exponential calculations for this method. Numerical results are presented that demonstrate the stability of the axial expansion method in systems with voidlike regions, showcase the speedup from matrix exponential tables, and investigate the axial convergence of the method in terms of both expansion order and mesh size.

Herring, Nicholas↗

DOE OSTI2021

A consistent, Bayesian, approach to the cross section probability distribution in the unresolved resonance region

The cross sections of neutron-induced reactions can be divided into three energy ranges: the resolved resonance region (RRR), the unresolved resonance region (URR), and the fast region. In general, the cross sections in the URR show significant fluctuations that cannot be predicted and cannot be experimentally resolved, thus, it is commonly assumed that the cross section at a specific energy is given by a probability distribution function (PDF) over a range of values that can span several orders of magnitude. The current methodology used to describe such behavior is to construct the PDF by stochastically generating resonance ladders and numerically measuring the PDF. The resonance ladders are sampled using known resonance statistical properties and average resonance widths and spacings extrapolated from the RRR. Although this is a standard and widely used technique, it is computationally very expensive, therefore, an alternative, analytical, approach would be preferable due to the considerable speed up of the computational time in real life applications. Moreover, the current methodology does not take into account existing experimental data, such for total and capture cross sections, that are available for many nuclei. Finally, this approach was developed to be used in reactor-scale applications and it is not suited for use in single-event applications. In this work we will rethink the entire approach to the PDF construction using a Bayesian mindset. This will allow us to provide a different definition of the PDF that allows a much faster calculation of the higher-temperature PDFs and a proper combination of theoretical and experimental PDFs following the probability theory. We will also show that our definition is well suited for single-event applications and we will make an explicit connection between our method and the standard approach. We do this by showing that the central limit theorem applies and our method leads to the same PDF obtained with the standard methodology, for a large number of events per history.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Evaluations for Nuclear Criticality Safety Program 12 C, 139 La, minor actinides, 235 U [Slides]

For light nuclei, preliminary work extends the evaluation from 6.5 MeV to ~ 10 MeV. For 139 La, the team delivered full evaluation in fast region to ORNL, including covariances. For sup>235 U, RPI data simulations, the team performed simulations and showed some improvement for neutrons below 5 MeV. Some of the changes needed for more improvement might not be supported by the current format. Some of the changes above 12 MeV to account for the angular distribution of preequilibrium neutrons require a change in the PFNS evaluation procedure.

235U re-evaluation↗

NASA NTRS2021

Fast Discovery of an Extremely Radio-Faint Millisecond Pulsar from the Fermi-Lat Unassociated Source 3fgl J0318.1+0252

High sensitivity radio searches of unassociated γ-ray sources have proven to be an effective way of finding new pulsars. Using the Five-hundred-meter Aperture Spherical radio Telescope (FAST) during its commissioning phase, we have carried out a number of targeted deep searches of Fermi Large Area Telescope (LAT) γ-ray sources. On February 27, 2018 we discovered an isolated millisecond pulsar (MSP), PSR J0318+0253, coincident with the unassociated γ-ray source 3FGL J0318.1+0252. PSR J0318+0253 has a spin period of 5.19 ms, a dispersion measure (DM) of 26 pc cm−3 corresponding to a DM distance of about 1.3 kpc, and a period-averaged flux density of (∼11±2) µJy at L-band (1.05–1.45 GHz). Among all high energy MSPs, PSR J0318+0253 is the faintest ever detected in radio bands, by a factor of at least ∼4 in terms of L-band fluxes. With the aid of the radio ephemeris, an analysis of 9.6 years of Fermi-LAT data revealed that PSR J0318+0253 also displays strong γ-ray pulsations. Follow-up observations carried out by both Arecibo and FAST suggest a likely spectral turn-over around 350 MHz. This is the first result from the collaboration between FAST and the Fermi-LAT teams as well as the first confirmed new MSP discovery by FAST, raising hopes for the detection of many more MSPs. Such discoveries will make a significant contribution to our understanding of the neutron star zoo while potentially contributing to the future detection of gravitational waves, via pulsar timing array (PTA) experiments.

Pei Wang↗

DOE OSTI2025

Stratified wind from a super-Eddington X-ray binary is slower than expected

Accretion disks in strong gravity ubiquitously produce winds, seen as blueshifted absorption lines in the X-ray band of both stellar mass X-ray binaries (black holes and neutron stars) and supermassive black holes. Some of the most powerful winds (termed Eddington winds) are expected to arise from systems in which radiation pressure is sufficient to unbind material from the inner disk (L ≳ L Edd ). These winds should be extremely fast and carry a large amount of kinetic power, which, when associated with supermassive black holes, would make them a prime contender for the feedback mechanism linking the growth of those black holes with their host galaxies. Here we show the XRISM Resolve spectrum of the galactic neutron star X-ray binary, GX 13+1, which reveals one of the densest winds ever seen in absorption lines. This Compton-thick wind significantly attenuates the flux, making it appear faint, although it is intrinsically more luminous than usual (L ≳ L Edd ). However, the wind is extremely slow, more consistent with the predictions of thermal-radiative winds launched by X-ray irradiation of the outer disk than with the expected Eddington wind driven by radiation pressure from the inner disk. This puts new constraints on the origin of winds from bright accretion flows in binaries, but also highlights the very different origin required for the ultrafast (v ~ 0.3c) winds seen in recent Resolve observations of a supermassive black hole at a similarly high Eddington ratio.

Audard, Marc [Univ. of Geneva, Versoix (Switzerlan↗

DOE OSTI2026

Comparative Evaluation of Spectral Methods for Robust Reactor Noise Estimation

Reactor noise analysis provides a noninvasive means to determine neutron kinetic parameters from stochastic fluctuations in detector signals. However, standard cross-power spectral density (CPSD) analyses can be sensitive to numerical processing choices, which may introduce processing-dependent systematic shifts in estimates of the prompt neutron decay constant (α) and limit reproducibility. This study uses a hybrid multitaper–Welch spectral estimator to analyze subcritical noise measurements from a fast-spectrum critical assembly. The decay constant α was extracted using three frequency-domain methods: the CPSD, the magnitude-squared coherence (MSC), and the generalized magnitude-squared coherence (GMSC). These coherence-based estimators normalize detector auto-spectral structure and are expected to reduce the sensitivity of fitted α values to processing parameters. A Sobol global sensitivity analysis identified which numerical inputs most strongly influence the fitted values of α. All estimators produced a linear dependence of α on inverse count rate, with delayed-critical extrapolations near 1.7 × 10 4 s −1 , in agreement within 8% of MCNP6.3 KOPTS benchmark calculations. Sensitivity results show that while the CPSD depends on both time-bin width and taper selection, the MSC and GMSC are dominated by time-bin width alone, indicating reduced parameter coupling and greater robustness to processing variability. These findings demonstrate the feasibility and practical value of coherence-based spectral estimators for extracting α from reactor noise and support their broader application to multi-detector and irregular datasets in subcritical system characterization.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NASA NTRS1994

High-energy astrophysics: A theoretical analysis of thermal radiation from neutron stars

The unambiguous detection of thermal radiation from the surface of a cooling neutron star was one of the most anxiously awaited results in neutron star physics. This particular Holy Grail was found by Halpern and Holt, who used ROSAT to detect pulsed X-rays from the gamma-ray source Geminga and demonstrate that it was a neutron star, probably a radio pulsar beamed away from us. At an age of approximately 3.4 x 10(exp 5) years, Geminga is in the photon cooling era. Its surface temperature of 5.2 x 10(exp 5) K can be explained within the contexts of both the slow and fast cooling scenarios. In the slow cooling scenario, the surface temperature is too high unless the specific heat of the interior is reduced by extensive baryon pairing. In the fast cooling scenario, the surface temperature will be much too low unless the fast neutrino cooling is shut off by baryon pairing. Two other pulsars, PSR 0656+14 and PSR 1055-52, have also been detected in thermal X-rays by ROSAT. They are also in the photon cooling era. All of this research's neutron star cooling models to date have used the unmagnetized effective temperature-interior temperature relation for the outer boundary condition. Models are being improved by using published magnetic envelope calculations and assumed geometried for the surface magnetic field to determine local interior temperature-emitted flux relations for the surface of the star.

Applegate, James H.↗

DOE OSTI2020

Efficient method for estimation of fission fragment yields of $\textit{r}$-process nuclei

Background: More than half of all the elements heavier than iron are made by the rapid neutron capture process (or $\textit{r}$ process). For very-neutron-rich astrophysical conditions, such at those found in the tidal ejecta of neutron stars, nuclear fission determines the $\textit{r}$-process endpoint, and the fission-fragment yields shape the final abundances of 110 ≤ $\textit{A}$ ≤ 170 nuclei. The knowledge of fission-fragment yields of hundreds of nuclei inhabiting very-neutron-rich regions of the nuclear landscape is thus crucial for the modeling of heavy-element nucleosynthesis. Purpose: In this study, we propose a model for the fast calculation of fission-fragment yields based on the concept of shell-stabilized prefragments defined with help of the nucleonic localization functions. Methods: To generate realistic potential-energy surfaces and nucleonic localizations, we apply Skyrme density-functional theory. In this work, the distribution of the neck nucleons among the two prefragments is obtained by means of a statistical model. Results: We benchmark the method by studying the fission yields of 178 Pt, 240 Pu, 254 Cf, and 254,256,258 Fm and show that it satisfactorily explains the experimental data. We then make predictions for 254 Pu and 290 Fm as two representative cases of fissioning nuclei that are expected to significantly contribute during the $\textit{r}$-process nucleosynthesis occurring in neutron-star mergers. Conclusions: The proposed framework provides an efficient alternative to microscopic approaches based on the evolution of the system in a space of collective coordinates all the way to scission. It can be used to carry out global calculations of fission-fragment distributions across the $\textit{r}$-process region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

A Design and Fabrication Options Trade Study for Metallic Fuel without Internal Sodium Bonding

Nuclear fuels using alloys of uranium, or metallic fuels, have many beneficial properties. The classical metallic fuel design uses a loose fitting cylindrical “slug” of fuel placed inside stainless-steel cladding tubes where the gap is filled with sodium. This sodium bond is liquid at operating temperature and conducts heat from the slug to the cladding, especially in early life before fuel swells into contact with the cladding. Despite the benefits of sodium bonding, there is a desire to develop metallic fuel technologies without it chiefly to reduce chemical reaction hazards in spent fuel storage from sodium fast reactors operating on once-through fuel cycles. Elimination of the sodium bond may also help unlock potential benefits for fuel fabrication, reactor neutronics, and compatibility with other types of reactors. Creating a sodium-free metallic fuel revolves around the problem of manufacturing fuel slug geometries which are in close contact with the cladding at beginning of life to facilitate heat transport while alleviating fuel-cladding chemical interactions (FCCI) at this interface and providing enough free volume to accommodate fuel swelling. Accelerating development and qualification of this fuel system will require careful selection of design and manufacturing options. To this end, a design trade-off study was performed to evaluate candidate options. Several design and manufacturing options were assessed, weighted, scored, and ranked with respect to fabrication, normal reactor operation, off-normal scenarios, and back-end considerations. This effort was performed both for “baseline” needs, which represented a once-through fuel cycle at temperatures and burnups known to be viable for sodium-bonded metallic fuel, and for “enhanced” needs to represent opportunities for closed fuel cycles and/or more aggressive temperatures/burnups. The outcomes of this study prioritized a baseline technology using U-Zr alloy with additives to mitigate FCCI, produced in annular slug geometry by continuous casting, clad in austenitic stainless-steel alloy, and followed by a final step to swage the cladding down to close the gap. This study prioritized an enhanced fuel technology using U-Mo alloy, also produced by continuous casting into an annular geometry, followed by coating/plating with an FCCI barrier on the slug, again with a final step to swage the cladding diameter down using oxide dispersion strengthened steel. It was noted that development of the enhanced fuel technology would entail more risk, thus U-Zr alloy was put forth as a backup to U-Mo if challenges are encountered with FCCI barriers, and advanced ferritic/martensitic steels are put forth as a backup to oxide dispersion strengthened steels if swaging and welding are found unworkable.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2006

Fast X-ray Oscillations During Magnetar Flares

"We report on recent studies of high frequency variability during magnetar giant flares. These oscillations may represent the first observations of global shear oscillations in neutron star crusts, and can provide a new tools to study neutron star structure.

Strohmayer, T.↗

NASA NTRS2008

Fast X-Ray Oscillations During Magnetar Flares

I will review recent studies of high frequency variability during magnetar giant flares. These oscillations may represent the first observations of global shear oscillations in neutron star crusts. I will also discuss how the observation of crust vibrations can provide a new tool to study neutron star structure.

Strohmayer, Tod E.↗

DOE OSTI2021

Visualization of Solid-State Synthesis for Chalcogenide Na Superionic Conductors by in-situ Neutron Diffraction

Chalcogenide superionic sodium (Na) conductors are great potential as solid electrolytes (SEs) in all-solid-state Na batteries with advantages of high energy density and safety, and cost effectiveness. For solid Na-ion conductors, their crystal structures and ionically conductive properties are strongly influenced by the synthetic approaches and processing parameters. Thus, understanding the synthesis process is essential to control the structures and phases and thereby yields to Na-ion conductors with desirable properties. Thanks to the high-flux and deep-penetrating time-of-flight neutron diffraction (ND), we employed in situ experiments to track real-time structural changes of two chalcogenide SEs (Na 3 SbS 4 and Na 3 SbS 3.5 Se 0.5 ) during the solid-state synthesis. For these two conductors, the ND results reveal a fast one-step reaction for the synthesis and the molten process when heating up, and the recrystallization as well as the cubic-to-tetragonal phase transition up on cooling. Moreover, Se-doping is found to influence the reaction temperatures, lattice parameter and structure stability based on neutron experimental observations and theoretical simulation. This work presents a detailed structural study using in situ neutron diffraction technology for the solid synthesis process of chalcogenide Na-ion conductors, beneficial for the design and synthesis of new solid-state conductors.

25 ENERGY STORAGE↗

NASA NTRS1987

Quasi-static winds from neutron stars

A series of numerical models is constructed for radiatively driven, quasi-static winds from the surfaces of hot neutron stars. A mathematical technique is devised that in many cases facilitates the integration of the fluid equations in the vicinity of the sonic point, and an improved treatment of radiative transfer is developed that is appropriate to the exotic physical conditions encountered in the models. Boundary conditions which are more realistic than previous ones are used in these models. In agreement with earlier studies, it is found that radiatively driven winds are likely to be directly relevant to the existence of precursors in fast X-ray transients and to apparent radius variations during the course of some type I bursts, and that the presence of such a wind should prevent the bolometric luminosity of a neutron star from exceeding the Eddington limit by more than a small fractional amount. Formulas describing the wind models are presented which are usable as boundary conditions for calculations of the evolution of the deeper, hydrostatic layers of a neutron-star envelope.

Joss, Paul C.↗