Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “durable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Material processing, microstructure, and composite properties of low carbon Engineered Cementitious Composites (ECC)

Traditional PVA fiber-reinforced Engineered Cementitious Composites (ECC) show high tensile ductility and superior durability with tight crack width, but the high cost and embodied carbon can hinder its wider application in infrastructures. The objective of this study is to develop a better understanding of the fresh and hardened properties of an ECC that employs a lower embodied-carbon binder, Limestone Calcined Clay Cement (LC3), and lower-cost PP fiber that is widely available. Specifically, the interrelations between material processing, microstructure, and composite properties were studied experimentally. The results showed that ECC with high tensile ductility up to 9% tensile strain and tight crack width with 50 μm at 2% tensile strain can be achieved. It was found that a matrix paste with higher viscosity generally enhanced fiber dispersion uniformity and robustness in tensile strain-hardening. The paste viscosity is increased when OPC is replaced by LC3 and can be tuned with superplasticizer content. Larger maximum flaw size leads to lower first crack strength, beneficial for microcrack initiation and multiple cracking. This study generates fundamental knowledge linking processing-microstructure-performance of PP-LC3-ECC. This class of low embodied carbon ECC with tight crack width is expected to contribute to reducing the carbon footprint of the built environment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of pH on the nano/micro structure of calcium silicate hydrate (C-S-H) under sulfate attack

Calcium silicate hydrate (C-S-H), the most important Portland cement hydration product, determines the mechanical properties and durability of cementitious materials. In marine environment, C-S-H often suffers from sulfate attack – one of the most common and severe degradations for concrete. pH is considered as a critical factor in determining the deterioration behavior of C-S-H during sulfate attack, of which the significance may be overlooked. This study focused on the role of pH on the deterioration of C-S-H in terms of the composition and nano/micro structure under sulfate attack. The results show that lowering pH aggravates the decalcification of C-S-H, whereas a strong alkaline condition is beneficial to increase the resistance to deterioration. An increase in the mean chain length together with the proportion of large pores (>10 nm) is observed when C-S-H is subjected to low-pH sulfate attack (pH = 10–12), resulting in a relatively loose structure. The deep analysis on defective tobermorite model reveals that calcium at the interlayer of C-S-H nanostructure is readily removed under sulfate attack, thereby improving the potential of Si-O-Si groups formation and increases the mean chain length of C-S-H.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Concrete shrinkage and creep under drying/wetting cycles

Concrete shrinkage and creep under variable hydric conditions are important factors for the safety and durability of concrete especially in nuclear reactor or nuclear waste storage background. A large (and long – more than 900 days) experimental campaign, conducted on two different concretes, has therefore been designed to study the strains of non loaded and loaded concretes submitted to drying and liquid water imbibition cycles. For the purposes of comparison, concrete strains and mass variations during drying only (50% RH) and/or following cycles of drying/rewetting were also recorded. This allowed the identification of desiccation shrinkage, basic creep and drying creep at 10 MPa of axial stress. Important results were found and have shown that the final mass and strain are not deeply modified by the introduction of a rewetting phase either for a loaded or a non loaded material.

36 MATERIALS SCIENCE↗
DOE OSTI2021

3D imaging techniques for characterising microcracks in cement-based materials

Concrete inherently contains pores and microcracks that can adversely impact its mechanical properties and long-term durability. However, characterising microcracks is difficult due to their complex, multiscale and three-dimensional (3D) nature. This paper presents an evaluation of 3D imaging techniques for characterising microcracks induced by different mechanisms. Seven cement pastes, mortars and concretes subjected to drying shrinkage, autogenous shrinkage and freeze-thaw cycles were investigated using focused ion beam nanotomography (FIB-nt), broad ion beam serial section tomography (BIB-SST), laser scanning confocal microscopy (LSCM) combined with serial sectioning and X-ray microtomography (μCT). The study shows that the characteristics of microcracks vary significantly depending on exposure conditions. Yet there is no single technique that can capture the entire size range of microcracks from sub to tens of μm within a sufficiently representative sampling volume. The achievable image volume and resolution, and the advantages and disadvantages of each technique are compared and discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Prediction of moisture transfer in cement-based materials: Use of a porous network model to access transfer parameters

Knowing the water transport phenomena is fundamental for understanding the durability of cement-based materials. The moisture content within cementitious materials is of primary importance because it has a direct influence on mechanical (shrinkage, creep) and chemical (penetration of aggressive agents) degradation. Many models based on the determination of the transfer properties of the material under study already exist but require fitting of the parameters to find the experimental kinetics. Transfer parameters are generally estimated from the empirical approaches developed for soils by Van Genuchten and the water vapour diffusion reduction factor is often calculated via Millington's semi-empirical model. In this paper, we make a proposal to improve the prediction of moisture transfer, through mechanisms such as drying, capillary imbibition and water vapour permeability in cement-based materials, by using a porous network model to access the transfer parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mineralogical and microstructural alterations in a portland cement paste after an accelerated decalcification process

Cement paste leaching and concomitant decalcification is a common cause of concrete structure deterioration. Such alterations entail microstructural changes that condition concrete durability. This study analysed those changes in cement pastes exposed to accelerated decalcification, layer-by-layer, from the surface in contact with the leaching agent, 6 M NH{sub 4}NO{sub 3,} to the unaltered area. The microstructural changes were analysed with BSEM, MIP and BET whilst the mineralogical and nanostructural alterations in each layer were assessed with XRD, FTIR, {sup 29}Si and {sup 27}Al MAS NMR and BSD. Decalcification affected not only portlandite and CSH gel, but also the anhydrous clinker and ettringite, inducing major micro- and nano-structural changes, particularly in the two layers closest to the leaching agent. CSH gel decalcification was more intense in the outer layers where long chain gels co-existed with silicon rich gels. BDS, in turn, revealed differences between the amount of bound water in the surface interfacing with the leaching agent and in the leaching front. More specifically, larger numbers of water molecules were tightly bound to silanol groups in the outer, whereas hydroxyl group distribution was more orderly in the inner layers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hygro-thermo-mechanical modeling of partially saturated air-entrained concrete containing dissolved salt and exposed to freeze-thaw cycles

Highlights: • A model for cyclic freezing of air-entrained concrete containing salt is proposed. • The freeze-thaw hysteresis, also including the effect of dissolved salt, is modeled. • The diffusive and convective flux of salt is coupled to the freeze-thaw processes. • The freeze-thaw response of air-entrained concrete containing salt is reproduced. • Liquid absorption from reservoirs increases with an increased concentration of salt. In cold regions, understanding the freeze-thaw behavior of air-entrained concrete is important for designing durable structures and assessing the remaining service life of existing structures. This study presents a hygro-thermo-mechanical multiphase model that describes the cyclic freeze-thaw behavior of partially saturated air-entrained concrete containing dissolved salt. An equilibrium and a non-equilibrium approach are adopted to model the ice formation, including the freeze-thaw hysteresis, inside the porous network. The model also considers the diffusive and convective transport of the dissolved salt coupled to the freeze-thaw processes. Two examples are presented to verify and highlight the capabilities of the model. The first example shows that the model is capable of reproducing the experimentally observed mechanical response of specimens containing NaC1-solutions of different concentrations. In the second example, a larger absorption of liquid from an external reservoir is obtained with an increasing salt concentration in the reservoir, which is consistent with experimental observations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Belite cements and their activation

Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO{sub 2} emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO{sub 2} and NO{sub x} emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemical degradation of fly ash blended concrete with the seasonal variation of rainwater in a radioactive waste repository: A thermodynamic modeling approach

Highlights: • The thermodynamic model for the cementitious system was successfully developed. • The chemical degradation of concrete was greatly affected by rainwater types. • Inorganic carbon species in rainwater reduced the chemical resistance of concrete. • The durability of concrete to rainwater decreased with increasing fly ash content. This study presents a long-term degradation behavior of fly ash blended concrete in a vault type low- and intermediate-level radioactive waste (LILW) repository by thermodynamic equilibrium calculations using PHREEQC combined with CEMDATA18 database. Since rainwater plays a predominant role as leachate for the concrete waste container in the repository, the effect of chemical properties of seasonal rainwater on the chemical degradation of concrete was analyzed. In addition, the impact of the blending with fly ash on the chemical degradation was evaluated through a gradual replacement of ordinary Portland cement (OPC) by fly ash. Regardless of the replacement level, autumn rainwater showed the greatest influence on the concrete degradation owing to the presence of inorganic carbon species, which induce the carbonation. The resistance of concrete to chemical degradation by rainwater was persistently reduced due to the decreasing formation of portlandite and calcium silicate hydrate (C-S-H) with increasing replacement level.

36 MATERIALS SCIENCE↗
DOE OSTI2021

edxia: Microstructure characterisation from quantified SEM-EDS hypermaps

The characterisation of cement paste microstructure is an important step towards understanding durability mechanisms in cementitious materials. Scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS) is a widely used technique to analyse the microstructure at the micron-scale. However, it is challenging, notably because the characteristic size of many phases is found on a scale smaller than the EDS interaction volume. This work presents a new image analysis framework to identify phases and quantify the microstructure of cementitious materials from SEM-EDS hypermaps. By leveraging domain knowledge, representative points are attributed to phases and mixtures of phases based on ratio plots. Then, quantitative analysis of the microstructure can be carried out (chemical composition, particle size distributions, volume fractions, …). We demonstrate the abilities of the framework, and we present possible applications and extensions of the method. The framework is available as both a graphical interface and a Python code.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomic structure and phase assemblages in novel M-(N)-A-S-H materials

This paper investigates the atomic structure and phase assemblages in new sodium-stabilized magnesium aluminosilicate hydrate (M-(N)-A-S-H) cementitious binders. Results indicate that in the absence of Ca{sup 2+}, Mg{sup 2+} promotes a binder atomic structure of Si-Al tetrahedral sheets and octahedral Mg sheets with hydrated Na{sup +} cations likely in the interlayer sites similar to trioctahedral micas (phyllosilicates). NMR studies verify the incorporation of Al in tetrahedral silicate sheets. XRD demonstrates the ability of these regions to nucleate and form zeolites (i.e., sodalite) as well as the formation of Mg-Al layered double hydroxide (LDH) phases (i.e., meixnerite), which is expected due to high concentrations of Mg and Al. TGA results indicate that M-(N)-A-S-H possesses chemically bound water and hydroxyl units similar to other Mg binders. These results evince the critical role of Mg to form unique atomic structures and durability-linked phases in low-calcium alkali-activated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of supplementary cementitious materials on carbonation of cement pastes

Supplementary cementitious materials (SCM) are increasingly used in concrete for economical and environmental reasons. However, the durability of reinforced concretes against, for example, corrosion induced by carbonation varies. Here, the phase assemblage of various cement pastes with/without SCM (slag, fly ash and metakaolin), carbonated in accelerated conditions (1.5% CO{sub 2} and 65% RH) or not, has been investigated by various technics (XRD, TGA/DTA and {sup 29}Si as well as {sup 27}Al nuclear magnetic resonance spectroscopy) and compared. Results show that, after carbonation, anhydrous phases are less decalcified than hydrated phases. In cement pastes with slag, most of the calcium remains in the non-hydrated part of the slag. In contrast, the C-A,S-H phase is deeply modified and results show a coupling between C-A,S-H and hydrated aluminate phases during carbonation. In all carbonated materials, these phases tend to become an aluminosilicate gel, a very amorphous/disordered phase, containing less water than the original hydrates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of temperature curing on properties and hydration of wollastonite blended magnesium potassium phosphate cements

K-struvite, the main hydrate of magnesium potassium phosphate (MKP) cements, dehydrates at ~50 °C, thus elevated temperatures at service conditions could affect cement properties and durability. In this study, properties and hydration of MKP cement without and with wollastonite were investigated at 20 and 50 °C. In hydrated pure MKP cement K-struvite decomposes progressively over time to MgKPO{sub 4}·H{sub 2}O at 50 °C, which leads to a strong reduction of solid volume and severe strength loss. The presence of wollastonite significantly slows down the decomposition rate of K-struvite, which is still observed after 393 days at 50 °C. K-struvite together with amorphous hydroxyapatite, M-(C)-S-H and CaK{sub 3}H(PO{sub 4}){sub 2} from the wollastonite reaction result in a cement with good short and long-term strength at both 20 and 50 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantifying the anomalous water absorption behavior of cement mortar in view of its physical sensitivity to water

The one-dimensional water absorption into cement-based materials, possibly the simplest case of unsaturated water flow playing a fundamental role in predicting mass transport and durability, is still far from being completely understood due to several puzzling anomalies. Considering the water sensitivity of C-S-H gels (swell upon wetting and contract upon drying), a modified Richards equation (MRE) is proposed to quantify the anomalous water absorption into cement-based materials of changing porosity. Consistent experimental tests on a cement mortar and calculations indicate that the MRE with time-decaying water permeability can quantitatively capture the long-term absorption with two linear stages and a nonlinear transition stage between them. The water sensitivity is validated to be responsible for the anomalous deviation of water absorption from the classical square root of time law. It also partially contributes to the anomalous dependence of sorptivity on the temperature-dependent surface tension and viscosity of water and many organic liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the use of limestone calcined clay cement (LC3) in high-strength strain-hardening cement-based composites (HS-SHCC)

Highlights: • Use of LC{sup 3} slightly reduces flowability and shortens the setting time of fresh matrices. • Highly polymerized C-A-S-H gel and abundant ettringite benefit flexural strength of LC{sup 3}-matrices. • Use of LC{sup 3} enhances the bond strength between fiber and high-strength matrix. • LC{sup 3}-based HS-SHCC yields similar flexural performance as the composite with Portland cement. High-strength strain-hardening cement-based composites (HS-SHCC) demonstrate excellent mechanical and durability properties. However, high cement content typical to HS-SHCC results not only in high carbon footprint, but also in excessive hydration heat and severe autogenous shrinkage. In this investigation, Limestone Calcined Clay Cement (LC{sup 3}) was used to produce sustainable HS-SHCC. The LC{sup 3} substitution resulted in higher energy consumption during mixing and in shorter setting times of the fresh, plain matrices. Although the LC{sup 3} substitution slightly reduced the compressive strength, the formation of highly polymerized C-A-S-H gel and abundant ettringite benefited the flexural strength of the plain matrices. Additionally, single-fiber pullout experiments showed that the use of LC{sup 3} led to increased fiber-matrix bond strength and pullout energy. Finally, the replacement of Portland cement by LC{sup 3} resulted in HS-SHCC with similar mechanical performance to the reference composite, indicating a high potential for using LC{sup 3} in high-performance cement-based composites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Use of kaolinite clays in development of a low carbon MgO-clay binder system

Magnesium oxide based cements may provide a promising alternative to the conventional Portland cement in many applications. This study investigates the feasibility of using calcined kaolinitic clay to produce an MgO binder. The MgO-based binder were prepared using a low kaolinite content clay and metakaolin and were compared with a silica fume system. Implications of the addition of magnesium carbonate in the binder were also investigated. Isothermal calorimetry, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) were used to study the hydration characteristics of the binder system whereas compressive strength and porosity were measured to determine mechanical and durability attributes. The economic and environmental aspects of the binder system is also discussed. Hydrotalcite like phases were clearly produced on hydration in the clay mixes containing carbonate additions. The compressive strength of clay mixes was at par or better compared to systems containing silica fume, and the clay systems had significantly lower porosity levels. The presence of magnesium carbonate further enhanced the physical properties of the clay mixes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strategies for control and mitigation of efflorescence in metakaolin-based geopolymers

Efflorescence can be harmful to material performance as a consequence of microstructural changes due to leaching and carbonation of alkalis. This article identifies mechanisms of efflorescence in metakaolin-based geopolymers, and approaches to reduce free/mobile alkali cations and pore network connectivity, and hence reduce efflorescence. Mechanical, mass transport and microstructural properties are assessed in metakaolin-based geopolymer cements produced using different alkali concentrations in the alkali activator and substitution/addition of blast furnace slag, silica fume, calcium aluminate cement, silicone oil and a dispersive admixture. The most effective strategy to reduce efflorescence results from increasing Si/Al in the geopolymer gel by addition of soluble silicate, silica fume or silicone oil. Addition of calcium aluminate cement or a dispersive admixture also reduce efflorescence, but are less effective. These results confirm that efflorescence may be reduced by controlling the amount of soluble silicates and reducing free alkali cations in geopolymers, providing enhanced performance and durability.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A closer look at corrosion of steel reinforcement bars in concrete using 3D neutron and X-ray computed tomography

Corrosion of reinforcing bars constitutes the largest threat to the durability of concrete structures. Thus, several studies have investigated the nature of the corrosion products, most using post-mortem analyses. However, corrosion products evolve when in contact with oxygen, hindering result interpretation. This work presents instead a state-of-the-art, non-destructive 3D method for the assessment of corrosion of embedded reinforcements. Multimodal neutron and X-ray tomography was used to observe, non-destructively, the characteristics of the corrosion products in two concrete samples, with the aim of investigating possible benefits of the use of this technique for reinforced concrete structures. One sample was naturally corroded, extracted from an 81-year-old bridge, the other was corroded via the galvanostatic method, resulting in corrosion-induced cracks. Quantitative and qualitative data was acquired, including the iron-to-rust volumetric ratio in macroscopic interfacial voids and the thickness of the corrosion layer at the steel concrete interface. The iron-to-rust volumetric ratio corresponded to large, soluble, corrosion products, forming in environments with low availability of oxygen for both samples.

36 MATERIALS SCIENCE↗