SEARCH · Engineering Papers

Results for “distributed state estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

DOE OSTI2026

High Time Resolution Modelled and Measured New Particle Formation Rates During the 2023 Pittsburgh, PA Campaign

Particle size distributions are used to calculate nucleation rates during new particle formation (NPF). However, the low time resolution and poor sensitivity of instruments deployed to observe particle size distributions can lead to inaccurate estimates of nucleation rates. We calculated nucleation rates in Pittsburgh, PA from particle size distributions measured with the new high time resolution Condensation Particle Counters For Atmospheric Rapid Measurements (CPC FARM) and from gas precursor concentrations measured with a chemical ionization mass spectrometer. The CPC FARM nucleation rates were calculated by examining the appearance rate of particles in the smallest size bin at 1.6 nm. The nucleation rate of 1.6 nm determined every second resulted in positive and negative rates, indicating the influence of inhomogeneous mixing and advection of precursor gases and clusters. These effects are not currently considered when estimating nucleation rates from measurements. The nucleation rates from the CPC FARM were compared to the nucleation rates determined from a transient acid‐base reaction model using measured sulfuric acid concentration, strong base concentrations, and CPC detection efficiencies. The transient form of the model allowed the advection of heterogeneously mixed precursors to influence the nucleation rate. Good agreement between particle and gas‐based nucleation rates is observed during sulfuric acid‐driven NPF events. This study demonstrates that high time resolution measurements of short‐lived and rapidly formed particles are needed to accurately capture nucleation rates, which are likely influenced by advection of nucleation precursors and clusters in heterogeneous environments such as urban areas.

Cheng, D. [Carnegie Mellon Univ., Pittsburgh, PA (↗

DOE OSTI2025

A Machine Learning Framework for Predicting Microphysical Properties of Ice Crystals From Cloud Particle Imagery

The microphysical properties of ice crystals are important because they significantly alter the radiative properties and spatiotemporal distributions of clouds, which in turn strongly affect Earth's climate. However, it is challenging to measure key properties of ice crystals, such as mass or morphological features. Here, we present a proof-of-concept framework for predicting three-dimensional (3D) microphysical properties of ice crystals from in situ two-dimensional (2D) imagery. First, we computationally generated synthetic ice crystals using 3D modeling software along with geometric parameters estimated from the 2021 Ice Cryo-Encapsulation Balloon (ICEBall) field campaign. Then, we used synthetic crystals to train machine learning (ML) models to predict effective density ($ρ_e$), effective surface area ($A_e$), and number of bullets ($N_b$) from synthetic rosette imagery. On unseen synthetic images, our ML models accurately predicted ice crystal properties. ResNet-18 performed best, achieving $R^2$ values of 0.99 and 0.98 for $ρ_e$ and $A_e$, respectively, and MAE of 0.10 for mathematical equation in single view tasks. Stereo view ResNet-18 further reduced RMSE by 40% for $ρ_e$ and $A_e$ and reduced MAE by 0.08 for $N_b$. This work provides a novel ML-driven framework for estimating ice microphysical properties from in situ imagery, which will allow for downstream constraints on microphysical parameterizations, such as the mass-size relationship.

Ko, J. [Columbia Univ., New York, NY (United State↗

DOE OSTI2025

Applying Gaussian Process Machine Learning and Modern Probabilistic Programming to Satellite Data to Infer CO 2 Emissions

Satellite data provides essential insights into the spatiotemporal distribution of CO 2 concentrations. However, many atmospheric inverse models fail to adequately incorporate the spatial and temporal correlations inherent in satellite observations and often lack rigorous methods for estimating parameters like spatial length scales. We introduce an inference model that processes the spatiotemporal covariance in satellite data and estimates hyperparameters such as covariance length scales. Our approach uses the Gaussian process (GP) machine learning (ML) and modern probabilistic programming languages (PPLs) to perform atmospheric inversions of emissions from satellite data. We develop a GP ML inversion system based on modern PPLs and the GEOS-Chem chemical transport model, simulating atmospheric CO 2 concentrations corresponding to the Orbiting Carbon Observatory-2/3 (OCO-2/3) data for July 2020. In our supervised learning framework, we treat the GEOS-Chem simulated data set as the target, with predictors derived by scaling the target with sector-specific factors hidden from the GP machine. Our results show that the GP model, combined with GPU-enabled PPLs, effectively retrieves true emission scaling factors and infers noise levels concealed within the data. This suggests that our method could be applied over larger areas with more complex covariance structures, enabling comprehensive analysis of the spatiotemporal patterns observed in OCO-2/3 and similar satellite data sets.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Predicting Large‐Scale Systematic Missing Pipe Attributes in Water Distribution Networks

Water distribution network (WDN) models are an essential tool used by water utilities for hydraulic analysis. Unfortunately, missing data and insufficient resources often make creating and maintaining these models unfeasible. Existing methods to address missing pipe properties, like sequential imputation for missing values and reconstruction using graph metrics, are designed to accommodate random patterns of missing information and require a significant percentage of the system's attributes to be known. However, these data completeness assumptions do not always align with real‐world scenarios where large sections of the WDN model have missing data. To address this challenge, this study proposes a data‐driven approach for estimating pipe diameter when considering different spatial patterns and degrees of data completeness (i.e., 0%–90%). Using data from 16 WDNs in Kentucky, this study compares the use of machine learning (ML) using topological and geospatial features against an existing deterministic approach. Results demonstrate that WDN models with pipe diameters predicted by the proposed ML method had comparable hydraulic performance to the ground truth models. Moreover, results showed that ML method performance varies between WDNs of differing topological classification. Insights from this study help advance the ability to leverage partial data to create and maintain WDN models amid uncertainty and inadequate resources.

Poff, Jason W. [Oregon State Univ., Corvallis, OR ↗

DOE OSTI2025

Atmospheric processing and aerosol aging responsible for observed increase in absorptivity of long-range-transported smoke over the southeast Atlantic

Biomass burning aerosol (BBA) from agricultural fires in southern Africa contributes about one-third of the global carbonaceous aerosol load. These particles have strong radiative effects in the southeast Atlantic (SEA), which depend in part on the radiative contrast between the aerosol layer in the free troposphere (FT) and the underlying cloud layer. However, there is large disagreement in model estimates of aerosol-driven climate forcing due to uncertainties in the vertical distribution, optical properties, and life cycle of these particles. This study applies a novel method combining remote sensing observations with regional model outputs to investigate the aging of the BBA and its impact on the optical properties during transatlantic transport from emission sources in Africa to the SEA. Results show distinct variations in extinction Ångström exponent (EAE) and single-scattering albedo (SSA) as aerosols age. Near the source, fresh aerosols are characterized by low mean SSA (0.84) and high EAE (1.85), indicating smaller, highly absorbing particles. By isolating marine contributions from the total column during BBA transport across the SEA, our analysis reveals an initial decrease in BBA absorptivity, with mean FT SSA of 0.87 after 6–7 d, followed by increased absorptivity with mean FT SSA of 0.84 after 10 d, suggesting enhanced absorption due to chemical aging. These findings indicate that BBA becomes more absorbing during extended transport across the SEA, with implications for reducing model uncertainties. Our remote-sensing-based results agree well with previous in situ studies and offer new insights into aerosol–radiation interactions and the energy balance over the SEA.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

A Tutorial on Bayesian analysis of linear shock compression data

Gas gun and other shock compression experiments often produce shock wave velocity measurements that are linearly associated with particle velocity. Traditionally, this empirical relationship is quantified with a single Hugoniot curve that is estimated using least squares regression. However, for downstream modeling and simulation tasks, it is often more useful to have multiple Hugoniot curves in the pressure–volume plane that are consistent with the data. We employ Bayesian uncertainty quantification methods as a framework for propagating measurement uncertainty through to model parameters and predictions. Specifically, this Tutorial shows how to sample multiple Hugoniot curves in the pressure–volume plane that are consistent with the shock wave-particle velocity measurements in a two-step Bayesian approach. First, we obtain an analytical expression for the posterior distribution of the linear model parameters using Bayesian linear regression. Second, we propagate samples from the posterior distribution through the Rankine–Hugoniot equations to yield Hugoniot curves in the pressure–volume plane. The procedure is demonstrated with publicly available data on argon, copper, and nickel, and compared against bootstrapping and linear regression. The Bayesian procedure is shown to be interpretable, computationally inexpensive, and less sensitive than an alternative bootstrapping approach to the removal of the point in the copper dataset that has the largest particle velocity. As a Tutorial on Bayesian methodology for the shock compression community, we provide several derivations and explanations that make this paper self-contained, and make all code and data available at github.com/llnl/BALSCD.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Star formation rate and stellar mass calibrations based on infrared photometry and their dependence on stellar population age and extinction

The stellar mass (M $\star$ ) and the star formation rate (SFR) are among the most important features that characterize galaxies. Measuring these fundamental properties accurately is critical for understanding the present state of galaxies, their history, and future evolution. Infrared (IR) photometry is widely used to measure the M $\star$ and SFR of galaxies because the near-IR traces the continuum emission of the majority of their stellar populations (SPs), and the mid/far-IR traces the dust emission powered by star-forming activity. This work explores the dependence of the IR emission of galaxies on their extinction, and the age of their SPs. It aims to provide accurate and precise IR-photometry SFR and M $\star$ calibrations that account for SP age and extinction while providing quantification of their scatter. We used the CIGALE spectral energy distribution (SED) fitting code to create model SEDs of galaxies with a wide range of star formation histories, dust content, and interstellar medium properties. We fit the relations between M $\star$ and SFR with IR and optical photometry of the model-galaxy SEDs with the Markov chain Monte Carlo (MCMC) method. As an independent confirmation of the MCMC fitting method, we performed a machine-learning random forest (RF) analysis on the same data set. The RF model yields similar results to the MCMC fits, thus validating the latter. This work provides calibrations for the SFR using a combination of the WISE bands 1 and 3, or the JWST NIR-F200W and MIRI-F2100W. It also provides mass-to-light ratio calibrations based on the WISE band-1, the JWST NIR-F200W, and the optical u - r or g - r colors. These calibrations account for the biases attributed to the SP age, while they are given in the form of extinction-dependent and extinction-independent relations. The proposed calibrations show robust estimations while minimizing the scatter and biases throughout a wide range of SFRs and stellar masses. The SFR calibration offers better results, especially in dust-free or passive galaxies where the contributions of old SPs or biases from the lack of dust are significant. Similarly, the M $\star$ calibration yields significantly better results for dusty and high-SFR galaxies where dust emission can otherwise bias the estimations.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Characterizing Spatial and Temporal Variability of California’s Coastal Upwelling Using a Satellite-Derived CUTI Index

Ocean upwelling off California is a wind-driven coastal process with complex interactions between spatial wind patterns and sea surface temperatures. Large-scale spatial and temporal upwelling characterizations are traditionally based on numerical models, while quantifying upwelling with direct observations is not straightforward. To complement model-based upwelling characterizations, here we use satellite estimates of winds, sea surface temperatures, and ocean currents along the California coast to calculate the coastal upwelling transport index (CUTI), originally calculated from a numerical ocean model. The CUTI framework accounts for both Ekman and geostrophic offshore-directed ocean transport, the latter of which is often neglected in satellite-based upwelling assessments. The approach yields the CUTI over a 30-yr period at a daily temporal and 0.25° spatial resolution to analyze upwelling patterns, with focus on potential Morro Bay and Humboldt wind energy areas. Morro Bay (CUTI median of 0.63 m 2 s −1 ) exhibits stronger, more consistent upwelling throughout the year, whereas Humboldt (CUTI median of 0.45 m 2 s −1 ) exhibits a pronounced seasonal cycle with strongest upwelling in the summer and occasional downwelling in winter. The cluster analysis of 1993–2022 satellite maps of CUTI identifies four characteristic spatial upwelling patterns along the coast, corresponding to distinct spatial distributions of sea surface temperature anomalies, Ekman transport, and geostrophic ocean water transport. This dataset provides an observation-based foundation for characterizing natural coastal upwelling off the California coast, showing good agreement with the original model CUTI while being based on satellite data and offering increased spatial resolution.

16 TIDAL AND WAVE POWER↗

DOE OSTI2026

Automatic Calibration and Health Monitoring of Infrastructure Sensors

Smart transportation infrastructure relies on networks of heterogeneous sensors - cameras, radars, and lidars - continuously monitoring traffic conditions. However, executing the initial spatial calibration of multiple sensors and the subsequent health monitoring presents significant operational challenges. Environmental factors, mechanical vibrations, and gradual drift cause spatial misalignment, degrading fusion performance and tracking accuracy. Traditional calibration approaches require manual intervention with specialized targets or survey equipment, resulting in service interruptions and high maintenance costs. This work presents an automated framework for initial calibration and continuous health monitoring without human intervention or service disruption. Our approach addresses two critical problems: (1) detecting when sensors become miscalibrated during operation, and (2) automatically re-establishing spatial alignment using only operational traffic data. The health monitoring component analyzes measurement innovations - differences between sensor observations and predicted object states - to detect systematic biases indicative of calibration drift. By computing bias magnitude, directional consistency, and rejection rates, the system identifies miscalibrations as small as 0.5 meters. Unlike traditional methods requiring known calibration targets, our diagnostic operates continuously on live traffic observations, enabling early detection before fusion quality degrades. The automatic recalibration algorithm leverages overlapping sensor fields-of-view and temporal correlation of vehicle observations. Using graph-based optimization, the system automatically discovers which sensor pairs observe common regions, estimates pairwise spatial transformations using RANSAC-based robust estimation, and jointly optimizes all sensor poses through bundle adjustment. The framework handles practical deployment challenges, including different sensor sampling rates (1-10 Hz), varying installation positions, unknown orientations, and limited overlap regions (>10%). When approximate sensor positions are available from installation surveys (+/-1m accuracy), the algorithm additionally estimates sensor orientations, refining both position and rotation to sub-meter and sub-degree accuracy. We validate the framework on multi-hour traffic datasets from six heterogeneous sensors with sampling rates ranging from 1 Hz to 10 Hz. Results demonstrate successful calibration even with sparse overlap (<20%) and automatic detection of miscalibrations exceeding 0.8 meters. This work enables a "deploy-and-forget" sensor infrastructure that maintains calibration autonomously, reducing maintenance costs while improving tracking accuracy. The techniques generalize beyond transportation to any multi-sensor monitoring application requiring robust spatial alignment, including smart cities, industrial monitoring, and surveillance systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2025

Cyberattack Detection and Mitigation on Central Volt‐VAr Using Circuit Law and Machine Learning

ABSTRACT In a distribution grid, voltage is maintained within a nominal range through a Volt‐VAr function that controls capacitor banks, reactive power of distributed energy resources (DER), and on‐load tap changers (OLTC). Availability of communications helps with the implementation of central Volt‐VAr control; however, it also opens the system to cyberattacks, causing voltage disturbances. Previous work has shown the adverse impacts of false data injection (FDI) on the central Volt‐VAr control; however, very few works have studied methods to detect and mitigate FDI on Volt‐VAr control. This paper addresses gaps in the detection and mitigation of FDI on the measurement packets of a central Volt‐VAr control. This work uses a two‐stage algorithm for cyberattack detection since the accuracy of a single‐stage machine learning (ML)–based detection method decreases while dealing with unseen data. The first stage is based on the verification of measurements against circuit laws, and the second stage utilizes a tree search algorithm and an ML method to detect the falsified data. This paper compares long short‐term memory (LSTM) and bidirectional LSTM (BiLSTM) as the employed ML algorithms. Finally, the mitigation algorithm replaces the falsified data with the estimated output of the ML algorithm. The effectiveness of the proposed method is tested for several cases using the IEEE 13‐bus test system in PSCAD software.

Beikbabaei, Milad [Bradley Department of Electrica↗

DOE OSTI2026

Large-momentum effective theory’s asymptotic extrapolation vs the inverse problem

Large-momentum effective theory is a physics-guided systematic expansion to calculate light-cone parton distributions, including collinear (PDFs) and transverse-momentum-dependent ones, at any fixed momentum fraction 𝑥 within a range of [𝑥 min , 𝑥 max ]. It theoretically solves the ill-posed inverse problem that afflicts other theoretical approaches to collinear PDFs, such as short-distance factorizations. Recently, Dutrieux et al. raised practical concerns about whether current or even future lattice data will have sufficient precision in the subasymptotic correlation region to support an error-controlled extrapolation—and if not, whether it becomes an inverse problem where the relevant uncertainties cannot be properly quantified. While we agree that not all current lattice data have the desired precision to qualify for an asymptotic extrapolation, some calculations do, and more are expected in the future. We comment on the analysis and results in Dutrieux et al. and argue that a physics-based systematic extrapolation still provides the most reliable error estimates, even when the data quality is not ideal. In contrast, reframing the long-distance asymptotic extrapolation as a data-driven-only inverse problem with ad hoc mathematical conditioning could lead to unnecessarily conservative errors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Advanced Ceramic Membranes/Modules for Ultra Efficient Hydrogen (H2) Production/Carbon Dioxide (CO2) Capture for Coal-Based Polygeneration Plants: Fabrication, Testing, and CFD Modeling

Inorganic membrane-based systems are a promising technology for precombustion CO2 capture with simultaneous H2 production. State-of-the-art packages for high temperature and pressure service consist of multiple tube membrane bundles prepared in a "candle filter" configuration, in which the membrane tubes are open at one end and sealed at the other. This configuration is used for practical reasons, specifically the need to minimize problems due to thermal expansion mismatch between the ceramic tube bundle and the steel housing. However, the primary technical problem with the candle filter format for commercial-scale installations is the inability to purge the tube side (typically the permeate side), a feature that is crucial for high H2 recovery. In this study, the focus is to design and fabricate the first dual-end open full ceramic multiple tube membrane bundle that enables tube side (permeate) purge for gas separation applications. An additional key feature of this design is the simplified module layout, as the membrane bundles can be installed end-to-end with tube side (permeate) flow directly from one bundle to the next. This layout simplifies the membrane to housing seals and yields significant improvement in membrane packing density. Detailed focus areas in our studies include: (i) Materials development and preparation of the tube-to-tube sheet potting for the dual-ended bundle; (ii) the sealing and optimal module configuration design to minimize membrane stress upon module mounting; (iii) the demonstration, via the fabrication of CMS and Pd-alloy membranes supported on full-size, dual-ended ceramic support bundles, of the first example of a purgeable ceramic membrane and module; and (iv) development of a CFD model of the membrane module for calculation of feed flow distribution, and for use in scale-up, and capital cost estimating. The CFD model was validated using experimental data with the multi-tubular membrane system, employing He/N2 as a model gas mixture (surrogate for H2/CO2), and has been shown to be quite accurate. Employing the model, we are able to study the effects of operating pressure and temperature, feed and sweep gas flow rates, and the choice of membrane tube configuration on system performance.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2022

Advanced Ceramic Membranes/Modules for Ultra Efficient Hydrogen (H2) Production/Carbon Dioxide (CO2) Capture for Coal-Based Polygeneration Plants: Fabrication, Testing and CFD Modeling

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2026

DELVE Milky Way Satellite Galaxy Census. I. Satellite Population and Survey Selection Function in DES, DELVE, and Pan-STARRS

The properties of Milky Way satellite galaxies have important implications for galaxy formation, reionization, and the fundamental physics of dark matter. However, the population of Milky Way satellites includes the faintest known galaxies, and current observations are incomplete. To understand the impact of observational selection effects on the known satellite population, we perform rigorous, quantitative estimates of the Milky Way satellite galaxy detection efficiency in three wide-field survey datasets: the Dark Energy Survey Year 6, the DECam Local Volume Exploration Data Release 3, and the Pan-STARRS1 Data Release 1. Together, these surveys cover ∼13,600 deg 2 to g ∼ 24.0 and ∼27,700 deg 2 to g ∼ 22.5, spanning ∼91% of the high-Galactic-latitude sky (∣b∣ ≥ 15°). We apply multiple detection algorithms over the combined footprint and recover 49 known satellites above a strict census detection threshold. To characterize the sensitivity of our census, we run our detection algorithms on a large set of simulated galaxies injected into the survey data, which allows us to develop models that predict the detectability of satellites as a function of their properties. We then fit an empirical model to our data and infer the luminosity function, radial distribution, and size–luminosity relation of Milky Way satellite galaxies. Our empirical model predicts a total of $265^{+79}_{-47}$ satellite galaxies with −20 ≤ M V ≤ 0, half-light radii of 15 ≤ r 1/2 , (pc) ≤ 3000, and galactocentric distances of 10 ≤ D GC (kpc) ≤ 300. We also identify a mild anisotropy in the angular distribution of the observed galaxies, at a significance of ∼2σ, which can be attributed to the clustering of satellites associated with the LMC.

Tan, Chin Yi [Univ. of Chicago, IL (United States)↗

DOE OSTI2026

Multiscale modeling of packed-bed microwave reactors and estimation of intrinsic materials' permittivity

Modeling of packed-bed microwave reactors relies on an accurate representation of particle size, shape, and distribution within the bed, as well as the particles' dielectric properties. The measured permittivity of microwave susceptors (powders or structured materials) depends on the geometric features of the particles and the porosity of the bed, as well as the specific form factor of a structured material. These are effective properties and cannot be used to analyze other reactor configurations unless the geometric effects are removed. Therefore, we introduce a methodology for extracting the intrinsic particle permittivity from experimentally measured effective permittivity by combining cavity-based measurements with multiscale simulations and machine learning. Further, we develop the first multiscale model of packed-bed microwave reactors that incorporate particle effects (geometric features, random packing, and particle contact). This approach bridges macroscopic observables with mesoscopic physics, enabling analysis of local hotspots, arcing, and contact effects that control reactor performance. Using polymer-based spherical activated carbon (PBSAC) and silicon carbide (SiC) as examples, we demonstrate that the inferred particle permittivity is consistent with independent experimental heating profiles we collect from microwave reactors without adjustable parameters. Finally, this methodology establishes a foundation for predictive, multiscale design of microwave packed-bed reactors that explicitly accounts for particle-scale effects, enabling the estimation of intrinsic permittivity for the first time.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Comparative analysis of thermal management systems in electric vehicles at extreme weather conditions: Case study on Nissan Leaf 2019 Plus, Chevrolet Bolt 2020 and Tesla Model 3 2020

With the surge in electric vehicle (EV) adoption and the need for extended driving ranges, optimizing energy efficiency, particularly through thermal management, is critical, especially in extreme weather. Managing the substantial energy needed for cabin climate control and battery temperature regulation can increase energy demands by over 50 %, severely limiting range. This study conducts a comparative analysis of thermal management systems (TMS) in three popular EV vehicles, 2020 Chevrolet Bolt, 2019 Nissan Leaf Plus, and 2020 Tesla Model 3, evaluating their distinct TMS configurations and performance under varied weather conditions. Using both numerical simulations and experimental data collected on a controlled test bench at Argonne National Laboratory, we assess how TMS architecture and operational modes influence energy consumption and range. A comprehensive TMS model was developed, integrating cabin and battery thermal sub-models in the Autonomie software platform, to simulate temperature fluctuations and range impacts. Cabin climate was modeled using a mono-zonal approach, while battery cell temperature distribution was estimated through a 2D nodal structure. Each vehicle's distinct TMS setup was evaluated: the Chevrolet Bolt and Tesla Model 3 use a dual evaporator vapor compression cycle with a PTC heater for the cabin and a coolant loop for battery thermal management; the Nissan Leaf Plus employs a heat pump with a PTC heater for the cabin and air-cooling for the battery. Tests conducted at ambient temperatures of 35°C, 22°C, -7°C, and -18°C reveal significant differences in energy use and range reduction across both configurations and conditions. At 35°C, the Tesla Model 3, Chevrolet Bolt, and Nissan Leaf Plus have a range reduction of 8%, 9%, and 13%, respectively, due to air conditioning. In winter, heating technology is paramount; at -7°C, the Nissan Leaf's heat pump configuration achieves a lower range reduction (19.3%) compared to the Tesla and Chevrolet Bolt PTC heaters, which reduce range by 28.3% and 31%, respectively. Further, this study provides valuable insights for automotive engineers, EV technology researchers, and thermal management system designers aiming to enhance electric vehicle performance by understanding how different weather conditions and TMS architectures impact energy consumption and driving range.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2025

Weighted FFT estimators for 1D and 3D correlations of the Lyman- α forest

Correlations in the Lyman-α (Lyα) forest, both as a function of line of sight separation (1D) and 3D separation, provide a unique window to the distribution of matter at redshifts not accessible by current galaxy surveys. While optimal quadratic estimators have been used to measure 1D correlations, they are computationally expensive and difficult to extend to 3D analyses. On the other hand, estimators based on the Fast Fourier Transform (FFT) are significantly faster, but are affected by missing data in the spectra (masked pixels) and so far have not used pixel weights to reduce the uncertainties in the measurement. In this publication we describe how to compute the window matrix that enables forward-modelling the impact of masked pixels and weights on the FFT-based estimators. Here, we use Gaussian and hydrodynamical simulations with artificially masked pixels to validate the method on the measurement of 1D correlations. Finally, we show that the formalism can be extended to model the impact on 3D correlations, in particular on the cross-spectrum, the correlation of 1D Fourier modes as a function of transverse separation. This work will enable more precise clustering measurements with the Lyα forest dataset recently collected by the Dark Energy Spectroscopic Instrument (DESI).

Lokken, Martine [Univ. Autonoma de Barcelona (Spai↗

DOE OSTI2026

Dynamics and Structure of Molten Neodymium Titanate

Binary rare earth titanates can be vitrified using levitation melt quenching, and their glasses are promising for optical applications. To better understand their thermophysical properties and dynamics, we have used molecular dynamics (MD) and empirical potential structure refinement (EPSR) to simulate molten neodymium titanate, 83TiO 2 –17Nd 2 O 3 . The models are compared with high-energy synchrotron X-ray diffraction of the melt structure over 1060–1960 K and thermophysical property measurements of electrostatically levitated droplets over 1500–2200 K. As temperature increases, the network periodicity increases and the correlation length decreases, both in monotonic trends that suggest continuous structural evolution through the melt and supercooled liquid regimes. At 1900 K, the mean Ti–O and Nd–O coordination numbers are 5.8(5) and 6.7(5), compared to the glass, 5.72(6) and 7.70(26). The equilibrium melting point is measured as 1860(20) K, over 100 K higher than previous estimates. Viscosity data from MD are in good agreement with experimental measurements. The dynamic propensity of Nd is similar to that of the network-forming Ti, suggesting that Nd does not participate as a conventional modifier. The viscosity of this fragile liquid is likely controlled by the breaking of cation–oxygen bonds and rearrangements of Ti–O polyhedra.

molecular dynamics↗