Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “differential equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Stability of partially lined combustors with distributed combustion

An integral method for theoretical evaluation of the stability of confined flows with mass sources is presented. This method is applied to evaluate the effect of partial length acoustic liners on liquid propellant combustors with distributed combustion sources. The combustor is modeled as a right circular cylinder terminated by a multiorifice (constant Mach number) nozzle. The spatial spread of combustion in the chamber is represented by an arbitrary number of pressure sensitive planar mass sources. On the cylindrical periphery of the chamber is an acoustic absorber of arbitrary length, position, and damping capability. Integral equations are developed from the partial differential equations describing the nonsteady flow and are solved iteratively. Results are given in terms of linear neutral stability plots using a pressure sensitive combustion response. Calculations indicate that increasing the axial spread of combustion increases the stability of the combustor and the effectiveness of the absorber. The most effective linear placement appears at the location of greatest combustion concentration.

Baer, M. R.↗
NASA NTRS1977

Numerical turbulence modeling

The underlying bases and developments in two techniques of detailed turbulence modeling are described where the flow is treated in the Eulerian sense, and one technique where the Lagrangian motions of vortices are followed. First, a technique is described for solving the single-point statistically averaged conservation equations. The Reynolds stresses that appear in these equations are evaluated by solving supplemental differential equations which contain terms that are modeled. A sequence of increasingly complex, but also increasingly general, modeling equations is described and computations based on these equations are compared with experimental data. The hierarchy of models described terminates with equations for the individual components of the Reynolds stress tensor. The second Eulerian technique approach to turbulence modeling is the direct numerical simulation of turbulent fields. In this approach, all three dimensional eddies between a predetermined range of sizes are computed in time within a specified volume of flow. Present day computers require a tradeoff between the size of the volume that can be considered and the degree of resolution of the turbulent eddies. Techniques of modeling the smallest eddies are described that permit enlarging the volume, or Reynolds number, that can be considered.

Rubesin, M. W.↗
NASA NTRS1977

Neutrally stable atmospheric flow over a two-dimensional rectangular block

The phenomena of atmospheric flow over a two dimensional surface obstruction such as a building modeled as a rectangular block are analyzed by an approach using the Navier-Stokes equations with a two equation model of turbulence. The partial differential equations for the vorticity, stream function, turbulence kinetic energy, and turbulence length scale are solved by a finite difference technique. The predicted results are in agreement with the limited experimental data available. Current computed results show that the separation bubble originates from the upper front corner of the block and extends approximately 11.5 block heights behind the block. The decay of the mean velocity along the wake center line coincides almost perfectly with the experimental data. The vertical profiles of the mean velocity defect are also in reasonable agreement with wind tunnel results. Velocity profiles in the mixing region are shown to agree with the error function profile typically found in the shear layer. Details of the behavior of the turbulence kinetic energy and the turbulence length scale are also discussed.

Shieh, C. F.↗
NASA NTRS1982

Postbuckling of orthotropic composite plates loaded in compression

The nonlinear large deflection equations of von Karman are written for 'specially' orthotropic plates. The equations are then manipulated to determine the parameters required to establish postbuckling behavior. It is found that only two new parameters are needed beyond those required for buckling. By assuming trigonometric functions in one direction, the plate equations are converted into ordinary nonlinear differential equations which are solved numerically using a two point boundary problem solver that makes use of Newton's method. The postbuckling behavior is obtained for simply supported and clamped, long, rectangular, orthotropic plates covering the complete range of dimensions and material properties.

Stein, M.↗
NASA NTRS1985

Calculating Closed-Loop Sensitivity to Parameter Variations

Performance sensitivity calculated by back substitution. Original Lyapunov equation differentiated two times with respect to parameter p. Each differential turns out to yield Lyapunov equation for first and second derivatives with respective to parameter p of steady-state covariance of state variables. Derivatives desired closed-loop performance sensitivities.

Schaechter, D. B.↗
NASA NTRS1984

Lubrication of Machine Elements

The understanding of hydrodynamic lubrication began with the classical experiments of Tower and Petrov. Reynolds used a reduced form of the Navier-Stokes equations and the continuity equation to generate a second order differential equation for the pressure in the narrow, converging gap of a bearing contact. Such a pressure enables a load to be transmitted between the surfaces with very low friction since the surfaces are completely separated by a film of fluid. In such a situation it is the physical properties of the lubricant, notably the dynamic viscosity, that dictate the behavior of the contact. The understanding of boundary lubrication is normally attributed to Hardy and Doubleday. In boundary lubrication it is the physical and chemical properties of thin films of molecular proportions and the surfaces to which they are attached that determine contact behavior. The lubricant viscosity is not an influential parameter. Research is devoted to a better understanding and more precise definition of other lubrication regimes between these extremes. One such regime, elastohydrodynamic lubrication, occurs in nonconformal contacts, where the pressures are high and the bearing surfaces deform elastically. In this situation the viscosity of the lubricant may raise considerably, and this further assists the formation of an effective fluid film. The science of these three lubrication regimes (hydrodynamic, elastohydrodynamic, and boundary) are described and the manner in which this science is used in the design of machine elements is examined.

Hamrock, Bernard J.↗
NASA NTRS1987

The Jeffcott equations in nonlinear rotordynamics

The Jeffcott equations are a system of coupled differential equations representing the behavior of a rotating shaft. This is a simple model which allows investigation of the basic dynamic behavior of rotating machinery. Nolinearities can be introduced by taking into consideration deadband, side force, and rubbing, among others. The properties of the solutions of the Jeffcott equations with deadband are studied. In particular, it is shown how bounds for the solution of these equations can be obtained from bounds for the solutions of the linearized equations. By studying the behavior of the Fourier transforms of the solutions, we are also able to predict the onset of destructive vibrations. These conclusions are verified by means of numerical solutions of the equations, and of power spectrum density (PSD) plots. This study offers insight into a possible detection method to determine pump stability margins during flight and hot fire tests, and was motivated by the need to explain a phenomenon observed in the development phase of the cryogenic pumps of the Space Shuttle, during hot fire ground testing; namely, the appearance of vibrations at frequencies that could not be accounted for by means of linear models.

Zalik, R. A.↗
NASA NTRS1988

Numerical methods for turbulent flow

It has generally become accepted that the Navier-Strokes equations predict the dynamic behavior of turbulent as well as laminar flows of a fluid at a point in space away form a discontinuity such as a shock wave. Turbulence is also closely related to the phenomena of non-uniqueness of solutions of the Navier-Strokes equations. These second order, nonlinear partial differential equations can be solved analytically for only a few simple flows. Turbulent flow fields are much to complex to lend themselves to these few analytical methods. Numerical methods, therefore, offer the only possibility of achieving a solution of turbulent flow equations. In spite of recent advances in computer technology, the direct solution, by discrete methods, of the Navier-Strokes equations for turbulent flow fields is today, and in the foreseeable future, impossible. Thus the only economically feasible way to solve practical turbulent flow problems numerically is to use statistically averaged equations governing mean-flow quantities. The objective is to study some recent developments relating to the use of numerical methods to study turbulent flow.

Turner, James C., Jr.↗