SEARCH · Engineering Papers

Results for “determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Planetary approach orbit determination using earth-based short and long baseline radio interferometry

This paper describes an investigation and comparison of the approach-phase orbit determination performance of delta-Very Long Baseline Interferometry (delta VLBI) and Connected Element Interferometry (CEI) data types when used in conjunction with conventional two-way Doppler data. Simulated data sets containing Doppler plus delta VLBI data and Doppler plus CEI data are used to calculate approximate orbit determination accuracy statistics for representative approach trajectories drawn from future robotic missions to Mars and Jupiter. The results illustrate the theoretical performance of CEI data acquired from short (20 km) baselines relative to that obtained with delta VLBI using the intercontinental baselines currently available within the NASA/JPL Deep Space Network.

Thurman, Sam W.↗

NASA NTRS1992

Precise determination of earth's center of mass using measurements from the Global Positioning System

Global Positioning System (GPS) data from a worldwide geodetic experiment were collected during a 3-week period early in 1991. Geocentric station coordinates were estimated using the GPS data, thus defining a dynamically determined reference frame origin which should coincide with the earth center of mass, or geocenter. The 3-week GPS average geocenter estimates agree to 7-13 cm with geocenter estimates determined from satellite laser ranging, a well-established technique. The RMS of daily GPS geocenter estimates were 4 cm for x and y, and 30 cm for z.

Vigue, Yvonne↗

NASA NTRS1992

Landsat-4 (TDRSS-user) orbit determination using batch least-squares and sequential methods

TDRSS user orbit determination is analyzed using a batch least-squares method and a sequential estimation method. It was found that in the batch least-squares method analysis, the orbit determination consistency for Landsat-4, which was heavily tracked by TDRSS during January 1991, was about 4 meters in the rms overlap comparisons and about 6 meters in the maximum position differences in overlap comparisons. The consistency was about 10 to 30 meters in the 3 sigma state error covariance function in the sequential method analysis. As a measure of consistency, the first residual of each pass was within the 3 sigma bound in the residual space.

Oza, D. H.↗

NASA NTRS1992

Viscosity determinations of some frictionally generated silicate melts: Implications for slip zone rheology during impact-induced faulting

Analytical scanning electron microscopy, using combined energy dispersive and wavelength dispersive spectrometry, was used to determine the major-element compositions of some natural and artificial glasses and their crystalline equivalents derived by the frictional melting of acid to intermediate protoliths. The major-element compositions are used to calculate the viscosities of their melt precursors using the model of Shaw at temperatures of 800-1400 C, with Fe(2+)/Fe(tot) = 0.5 and for 1-3 wt percent H2O. These results are then modified to account for suspension effects in order to determine viscosities. The results have implications for the generation of pseudotachylitic breccias as seen in the basement lithologies of the Sudbury and Vredefort structures and possibly certain dimict lunar breccias. Many of these breccias show similarities with the more commonly developed pseudotachylite fault and injection veins seen in endogenic fault zones that typically occur in thicknesses of a few centimeters or less. The main difference is one of scale: Impact-induced pseudotachylite breccias can attain several meters in thickness. This would suggest that they were generated under exceptionally high slip rates and hence high strain rates and that the friction melts generated possessed extremely low viscosities.

Spray, John G.↗

NASA NTRS1992

An experimental approach to determine the heat transfer coefficient in directional solidification furnaces

The heat transfer coefficient between a molten charge and its surroundings in a Bridgman furnace was experimentally determined using in-situ temperature measurement. The ampoule containing an isothermal melt was suddenly moved from a higher temperature zone to a lower temperature zone. The temperature-time history was used in a lumped-capacity cooling model to evaluate the heat transfer coefficient between the charge and the furnace. The experimentally determined heat transfer coefficient was of the same order of magnitude as the theoretical value estimated by standard heat transfer calculations.

Banan, Mohsen↗

NASA NTRS1992

Determination of the dissipative loss of a two-port network from noise temperature measurements

When radiometric equipment is available, noise temperature measurement techniques provide a convenient and accurate means for determining the dissipative component of the insertion loss of a two-port network. It is increasingly becoming the practice to ignore mismatch errors caused by multiple reflections between the source, the receiver, and the component whose dissipative loss is being measured. Mismatch errors are difficult to determine in practice because of the requirements of having full knowledge of the magnitudes of reflection coefficients and S-parameters. This article shows it is permissible to neglect the effects of mismatch errors if special conditions are met. These special conditions only require that the reflection coefficients of the source and load be made negligibly small and that the two-port network being evaluated has reciprocal and symmetrical properties.

Otoshi, T. Y.↗

NASA NTRS1992

Use of the VLBI delay observable for orbit determination of Earth-orbiting VLBI satellites

Very long-baseline interferometry (VLBI) observations using a radio telescope in Earth orbit were performed first in the 1980s. Two spacecraft dedicated to VLBI are scheduled for launch in 1995; the primary scientific goals of these missions will be astrophysical in nature. This article addresses the use of space VLBI delay data for the additional purpose of improving the orbit determination of the Earth-orbiting spacecraft. In an idealized case of quasi-simultaneous observations of three radio sources in orthogonal directions, analytical expressions are found for the instantaneous spacecraft position and its error. The typical position error is at least as large as the distance corresponding to the delay measurement accuracy but can be much greater for some geometries. A number of practical considerations, such as system noise and imperfect calibrations, set bounds on the orbit-determination accuracy realistically achievable using space VLBI delay data. These effects limit the spacecraft position accuracy to at least 35 cm (and probably 3 m or more) for the first generation of dedicated space VLBI experiments. Even a 35-cm orbital accuracy would fail to provide global VLBI astrometry as accurate as ground-only VLBI. Recommended charges in future space VLBI missions are unlikely to make space VLBI competitive with ground-only VLBI in global astrometric measurements.

Ulvestad, J. S.↗

NASA NTRS1992

A numerical field experiment approach for determining probabilities of microburst intensity

Several investigators had determined that some atmospheric parameters were related to the formation and severity of microbursts. For example, Caracena pointed out the relationship between a dry adiabatic lapse rate and microbursts in 'The crash of Delta Flight 191 at Dallas-Fort Worth international airport'. These early investigations led to the idea that numeric modeling of microbursts with varying atmospheric parameters might define 'signatures' that could lead to determining the probability of microburst intensity. The idea was that, by using already available sensors (such as static air temperature, pressure altitude, and radar reflectivity) onboard an aircraft, a reliable prediction of microburst existence and intensity could be formed. Such data could be used to create an 'expert meteorologist' using either artificial intelligence or other techniques that could be used in either reactive or look-ahead systems to vary sensitivity thresholds and coordinate the inputs from different detecting systems. To this end, Honeywell contracted to have the microburst simulations run. The questions to be addressed were the following: using the sensor set available to the aircraft (e.g. temperature, radar reflectivity, etc.), can we calculate the probability that (1) a microburst could be formed? and (2) that the resultant winds would be of sufficient magnitude to threaten the aircraft? Over a two year period, a data set of 1800 microburst simulations was accumulated. Verification of the microburst simulation was obtained using the results of other independent researchers and actual comparison to microburst events in Orlando and Denver. Some of the results from the simulation have already been incorporated into Honeywell's Windshear Detection and Guidance System with excellent results. Various aspects of this investigation are presented in viewgraph form.

Droegemeier, Kelvin K.↗

NASA NTRS1993

Method and apparatus for determination of material residual stress

A device for the determination of residual stress in a material sample consisting of a sensor coil, adjacent to the material sample, whose resistance varies according to the amount of stress within the material sample, a mechanical push-pull machine for imparting a gradually increasing compressional and tensional force on the material sample, and an impedance gain/phase analyzer and personal computer (PC) for sending an input signal to and receiving an input signal from the sensor coil is presented. The PC will measure and record the change in resistance of the sensor coil and the corresponding amount of strain of the sample. The PC will then determine, from the measurements of change of resistance and corresponding strain of the sample, the point at which the resistance of the sensor coil is at a minimum and the corresponding value and type of strain of the sample at that minimum resistance point, thereby, enabling a calculation of the residual stress in the sample.

Chern, Engmin J.↗

NASA NTRS1993

Determination of pyrotechnic functional margin

Following the failure of a previously qualified pyrotechnically actuated pin puller design, an investigation led to a redesign and requalification. The emphasis of the second qualification was placed on determining the functional margin of the pin puller by comparing the energy deliverable by the pyrotechnic cartridge to the energy required to accomplish the function. Also determined were the effects of functional variables. This paper describes the failure investigation, the test methods employed and the results of the evaluation, and provides a recommended approach to assure the successful functioning of pyrotechnic devices.

Bement, Laurence J.↗

NASA NTRS1993

Determination of atomic oxygen fluence using spectrophotometric analysis of infrared transparent witness coupons for long duration exposure tests

Atomic oxygen degradation is one of several major threats to the durability of spaceborne systems in low Earth orbit. Ground-based simulations are conducted to learn how to minimize the adverse effects of atomic oxygen exposure. Assessing the fluence of atomic oxygen in test chambers such as a plasma asher over long periods of time is necessary for accurate determination of atomic oxygen exposure. Currently, an atomic oxygen susceptible organic material such as Kapton is placed next to samples as a witness coupon and its mass loss is monitored and used to determine the effective atomic oxygen fluence. However, degradation of the Kapton witness coupons occurs so rapidly in plasma ashers that for any long term test many witness coupons must be used sequentially in order to keep track of the fluence. This necessitates opening vacuum to substitute fresh coupons. A passive dosimetry technique was sought to monitor atomic oxygen exposure over longer periods without the need to open the plasma asher to the atmosphere. This paper investigates the use of spectrophotometric analysis of durable IR transparent witness coupons to measure atomic oxygen exposure for longer duration testing. The method considered would be conductive to making in situ measurements of atomic oxygen fluence.

Podojil, Gregg M.↗

NASA NTRS1993

Improvements in ERBS attitude determination without gyros

Previous papers have described the modification of the Earth Radiation Budget Satellite (ERBS) Attitude Determination System (ADS) to overcome the impact of on board gyro degradation and failure on attitude ground support of the mission. Two approaches were taken: implementing a Kalman filter in place of the batch-least-squares attitude estimator to account for the propagation error produced by high-noise gyro data, and modeling the ERBS attitude dynamics to restore rate information in the case of gyro failure. Both of these methods had shortcomings. In practice, the filter attitude diverged without complete sensor observability, and accurate dynamics modeling required knowledge of disturbance torque parameters that had to be determined manually. These difficulties have been overcome by improved tuning of the filter and by incorporating dynamics parameter estimation into the ERBS ADS.

Chu, D.↗

NASA NTRS1993

Accurate attitude determination of the LACE satellite

The Low-power Atmospheric Compensation Experiment (LACE) satellite, launched in February 1990 by the Naval Research Laboratory, uses a magnetic damper on a gravity gradient boom and a momentum wheel with its axis perpendicular to the plane of the orbit to stabilize and maintain its attitude. Satellite attitude is determined using three types of sensors: a conical Earth scanner, a set of sun sensors, and a magnetometer. The Ultraviolet Plume Instrument (UVPI), on board LACE, consists of two intensified CCD cameras and a gimbal led pointing mirror. The primary purpose of the UVPI is to image rocket plumes from space in the ultraviolet and visible wavelengths. Secondary objectives include imaging stars, atmospheric phenomena, and ground targets. The problem facing the UVPI experimenters is that the sensitivity of the LACF satellite attitude sensors is not always adequate to correctly point the UVPI cameras. Our solution is to point the UVPI cameras at known targets and use the information thus gained to improve attitude measurements. This paper describes the three methods developed to determine improved attitude values using the UVPI for both real-time operations and post observation analysis.

Miglin, M. F.↗

NASA NTRS1993

Quaternion normalization in spacecraft attitude determination

Attitude determination of spacecraft usually utilizes vector measurements such as Sun, center of Earth, star, and magnetic field direction to update the quaternion which determines the spacecraft orientation with respect to some reference coordinates in the three dimensional space. These measurements are usually processed by an extended Kalman filter (EKF) which yields an estimate of the attitude quaternion. Two EKF versions for quaternion estimation were presented in the literature; namely, the multiplicative EKF (MEKF) and the additive EKF (AEKF). In the multiplicative EKF, it is assumed that the error between the correct quaternion and its a-priori estimate is, by itself, a quaternion that represents the rotation necessary to bring the attitude which corresponds to the a-priori estimate of the quaternion into coincidence with the correct attitude. The EKF basically estimates this quotient quaternion and then the updated quaternion estimate is obtained by the product of the a-priori quaternion estimate and the estimate of the difference quaternion. In the additive EKF, it is assumed that the error between the a-priori quaternion estimate and the correct one is an algebraic difference between two four-tuple elements and thus the EKF is set to estimate this difference. The updated quaternion is then computed by adding the estimate of the difference to the a-priori quaternion estimate. If the quaternion estimate converges to the correct quaternion, then, naturally, the quaternion estimate has unity norm. This fact was utilized in the past to obtain superior filter performance by applying normalization to the filter measurement update of the quaternion. It was observed for the AEKF that when the attitude changed very slowly between measurements, normalization merely resulted in a faster convergence; however, when the attitude changed considerably between measurements, without filter tuning or normalization, the quaternion estimate diverged. However, when the quaternion estimate was normalized, the estimate converged faster and to a lower error than with tuning only. In last years, symposium we presented three new AEKF normalization techniques and we compared them to the brute force method presented in the literature. The present paper presents the issue of normalization of the MEKF and examines several MEKF normalization techniques.

Deutschmann, J.↗

NASA NTRS1992

Determining the nuclear equation of state from neutron-star masses and radii

A method is developed for determining the nuclear equation of state directly from a knowledge of the masses and radii of neutron stars. This analysis assumes only that equilibrium neutron-star matter has the stress-energy tensor of an isotropic fluid with a barotropic equation of state, and that general relativity describes a neutron star's internal gravitational field. We present numerical examples which illustrate how well this method will determine the equation of state when the appropriate observational data become available.

Lindblom, Lee↗

NASA NTRS1992

Determination of refractive properties of fluids for dual-wavelength interferometry

Methods to calculate the refractive properties of solutions at different wavelengths are described by using experimental data at just two wavelengths. The properties are the refractive index and its gradients with temperature and concentration. Cauchy's equation is used to determine the refractive indices. The gradients versus temperature and concentration are then determined by using the Murphy-Alpert and the Lorentz-Lorenz equation, respectively. Finally, the particular case of a triglycine sulfate aqueous solution is considered as an example. The approach should provide the desired information for fringe analysis when dual-wavelength holographic or other interferometry is used for solving heat and mass transfer problems in fluids during crystal-growth experiments.

Vikram, Chandra S.↗

NASA NTRS1991

Determination and prediction of Magellan's orbit

The Magellan spacecraft has been systematically mapping the surface of Venus since September 15, 1990, using a synthetic aperture radar. The spacecraft orbit about Venus is nearly polar, with an orbital period of 3.26 hours and periapsis altitude of 295 km. The radiometric measurements and the data reduction method used to determine and predict the spacecraft state are described. Orbit determination and prediction results are given for the first 146 days of mapping (through February 8, 1991, 60 percent of the first rotation of Venus). Orbit accuracy requirements of 150 meters in the radial position, and 1 km in the along-track and cross-track positions are shown to be met, but with exceptions. All error requirements were exceeded during a combined period of limited in-plane orbit observability due to earth-orbit relative geometry, and increased measurement noise due to superior conjunction.

Engelhardt, D. B.↗

NASA NTRS1992

On determining the primordial helium abundance from the spectra of H II galaxies

A data set of 53 H II galaxies and giant H II regions whose observed abundances have reliable formal uncertainties reveals that the O/H-He/H relation used to determine the primordial helium abundance (PBA) has a highly significant physical dispersion. Consideration of possible sources of scatter indicates that it is almost certainly one-sided, i.e., upward from a minimum value of He/H at each O/H. The presence of an asymmetric dispersion casts doubt on values of PBA obtained by extrapolating ridge-line fits to the O/H-He/H relation. The loss of oxygen in SN explosions will lead naturally to a positive dispersion in He/H. The observed dispersions in He/H can be explained by chemical evolution models in which 0-95 percent of the newly synthesized oxygen is lost. It is concluded that in H II galaxies and giant H II regions PBA can be reliably determined only by fitting to the lower envelope of the O/H-He/H relation.

Campbell, Alison↗