Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data smoothing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Analysis of Ultra High Resolution Sea Surface Temperature Level 4 Datasets

Sea surface temperature (SST) studies are often focused on improving accuracy, or understanding and quantifying uncertainties in the measurement, as SST is a leading indicator of climate change and represents the longest time series of any ocean variable observed from space. Over the past several decades SST has been studied with the use of satellite data. This allows a larger area to be studied with much more frequent measurements being taken than direct measurements collected aboard ship or buoys. The Group for High Resolution Sea Surface Temperature (GHRSST) is an international project that distributes satellite derived sea surface temperatures (SST) data from multiple platforms and sensors. The goal of the project is to distribute these SSTs for operational uses such as ocean model assimilation and decision support applications, as well as support fundamental SST research and climate studies. Examples of near real time applications include hurricane and fisheries studies and numerical weather forecasting. The JPL group has produced a new 1 km daily global Level 4 SST product, the Multiscale Ultrahigh Resolution (MUR), that blends SST data from 3 distinct NASA radiometers: the Moderate Resolution Imaging Spectroradiometer (MODIS), the Advanced Very High Resolution Radiometer (AVHRR), and the Advanced Microwave Scanning Radiometer ? Earth Observing System(AMSRE). This new product requires further validation and accuracy assessment, especially in coastal regions.We examined the accuracy of the new MUR SST product by comparing the high resolution version and a lower resolution version that has been smoothed to 19 km (but still gridded to 1 km). Both versions were compared to the same data set of in situ buoy temperature measurements with a focus on study regions of the oceans surrounding North and Central America as well as two smaller regions around the Gulf Stream and California coast. Ocean fronts exhibit high temperature gradients (Roden, 1976), and thus satellite data of SST can be used in the detection of these fronts. In this case, accuracy is less of a concern because the primary focus is on the spatial derivative of SST. We calculated the gradients for both versions of the MUR data set and did statistical comparisons focusing on the same regions.

sea surface temperature SST)↗

HighDimMixedModels.jl: Robust high-dimensional mixed-effects models across omics data

High-dimensional mixed-effects models are an increasingly important form of regression in which the number of covariates rivals or exceeds the number of samples, which are collected in groups or clusters. The penalized likelihood approach to fitting these models relies on a coordinate descent algorithm that lacks guarantees of convergence to a global optimum. Here, we empirically study the behavior of this algorithm on simulated and real examples of three types of data that are common in modern biology: transcriptome, genome-wide association, and microbiome data. Our simulations provide new insights into the algorithm’s behavior in these settings, and, comparing the performance of two popular penalties, we demonstrate that the smoothly clipped absolute deviation (SCAD) penalty consistently outperforms the least absolute shrinkage and selection operator (LASSO) penalty in terms of both variable selection and estimation accuracy across omics data. To empower researchers in biology and other fields to fit models with the SCAD penalty, we implement the algorithm in a Julia package, HighDimMixedModels.jl .

Gorstein, Evan↗

CLASSIFICATION OF FIELD DWARFS AND GIANTS IN RAVE AND ITS USE IN STELLAR STREAM DETECTION

Samples of bright stars, as they emerge from surveys such as RAVE, contain comparable fractions of dwarf and giant stars. An efficient separation of these two luminosity classes is therefore important, especially for studies in which distances are estimated through photometric parallax relations. We use the available spectroscopic log g estimates from the second RAVE data release (DR2) to assign each star a probability for being a dwarf or subgiant/giant based on mixture model fits to the log g distribution in different color bins. We further attempt to use these stars as a labeled training set in order to classify stars which lack log g estimates into dwarfs and giants with a Support Vector Machine algorithm. We assess the performance of this classification against different choices of the input feature vector. In particular, we use different combinations of reduced proper motions, 2MASS JHK, DENIS IJK, and USNO-B B2R2 apparent magnitudes. Our study shows that-for our color ranges-the infrared bands alone provide no relevant information to separate dwarfs and giants. Even when optical bands and reduced proper motions are added, the fraction of true giants classified as dwarfs (the contamination) remains above 20%. Using only the dwarfs with available spectroscopic log g and distance estimates (the latter from Breddels et al.), we then repeat the stream search by Klementet al. (KFR08), which assumed that all stars were dwarfs and claimed the discovery of a new stellar stream at V {approx} -160 km s{sup -1} in a sample of 7015 stars from RAVE DR1. The existence of the KFR08 stream has been supported by two recent studies using other independent data sets. Our re-analysis of the pure DR2 dwarf sample exhibits an overdensity of five stars at the phase-space position of the KFR08 stream, with a metallicity distribution that appears inconsistent with that of stars at comparably low rotational velocities. Compared to several smooth Milky Way models, the mean standardized deviation of the KFR08 stream is only marginal at 1.6 {+-} 0.4. Our data therefore do not allow to draw definite conclusions about its existence, but future RAVE data releases and other (best spectroscopic) surveys are going to help in resolving this issue.

79 ASTRONOMY AND ASTROPHYSICS↗

Systems and methods for generating a graded lattice structure and their application to additive manufacturing

Systems and methods for generating graded lattice structures that can be used as infill for additively manufactured articles. Tailored sectioning and field-based smoothing are modified polygon, e.g., circle, packing algorithms that adjust the size of the circles based on physical field data to adapt the infill generation process to a field expected to be experienced by the article. Molecular dynamically generated lattice infill is based on force balancing a node distribution instead of a circle packing. Field data can be utilized to adjust the spacing of the node distribution according to a force balance equilibrium model that accounts for the field expected to be experienced by the article being additively manufactured. The resultant non-uniform honeycomb structures from tailored sectioning, field-based smoothing, and force-balancing robustly and efficiently address the connection issues with traditional non-uniform lattice structures.

Kim, Seokpum↗

Potential model for nuclear astrophysical fusion reactions with a square-well potential

The potential model for nuclear astrophysical reactions requires a considerably shallow nuclear potential when a square-well potential is employed to fit experimental data. Here, we discuss the origin of this apparently different behavior from that obtained with a smooth Woods-Saxon potential, for which a deep potential is often employed. We argue that due to the sharp change of the potential at the boundary the radius parameter tends to be large in the square-well model, which results in a large absorption radius. The wave function then needs to be suppressed in the absorption region, which can eventually be achieved by using a shallow potential. We thus clarify the reason why the square-well potential has been able to reproduce a large amount of fusion data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A search for periodicity in the x ray spectrum of black hole candidate A0620-00

The archived data from the SAS-3 observations of the X-ray nova A0620-00, the best of the stellar blackhole candidates, were exhaustively examined for evidence of variable phenomena correlated with the orbital motion of the binary system of which it is a member. The original analysis of these data was completed before discovery of the binary companion and determination of the orbital period of the system. New interest was drawn to the task of a reexamination of the archive data by the recent discovery of the massive nature of the X-ray source through analysis of the Doppler variations and ellipsoidal light variations of the faint K-star companion by McClintock and Remillard. The archive research, carried out under the supervision of the principal investigator, was the topic of the thesis submitted to the MIT Department of Physics by Kenneth Plaks in partial fulfillment of the requirements for the degree of Master of Science. Plaks' effort was focused on the elimination of fluctuations in the data due to errors in attitude solutions and other extraneous causes. The first products of his work were long-term light curves of the X-ray intensities in the various energy channels as functions of time during the time from outbursts in August 1975 to quiescence approximately 6 months later. These curves, are refined versions of the preliminary results published in 1976 (Matilsky et al. 1976). Smooth exponentials were fitted to these long term light curves to provide the basis for detrending the data, thereby permitting a calculation of residuals derived by subtracting the fitted curve from the data. The residuals were then analyzed by Fourier analysis to search for variations with the period of the binary orbit, namely 7.75 hours. No evidence of an orbital periodicity was found. However, the refined light curve provides a much clearer picture of the outburst and subsequent decay of the X-ray luminosity. In fact, there were two outbursts, each followed by an exponential decay with similar time constants of about 25 days. Previous evidence of a three-oscillation variation with a 7.8 day period were confirmed. Substantial theoretical effort has been devoted to attempts to account for the decay characteristics as the result of the gradual eating up of an accretion disk by a stellar-mass blackhole (e.g., Huang and Wheeler 1989). The improved decay curves will provide significant new constraints on the theoretical analyses.

Clark, George W.↗

The effects of burial diagenesis on multiscale porosity in the St. Peter Sandstone: An imaging, small-angle, and ultra-small-angle neutron scattering analysis

To examine the effects of burial diagenesis on heirarchical pore structures in sandstone and compare those with the effects of overgrowth formation, we obtained samples of St. Peter Sandstone from drill cores obtained in the Illinois and Michigan Basins. The multiscale pore structure of rocks in sedimentary reservoirs and the mineralogy associated with those pores are critical factors for estimating reservoir properties, including fluid mass in place, permeability, and capillary pressures, as well as geochemical interactions between the rock and the fluid. The combination of small- and ultra-small-angle neutron scattering with backscattered electron or X ray-computed tomographic imaging, or both, provided a means by which pore structures were quantified at scales ranging from aproximately 1 nm to 1 cm—seven orders of magnitude. Larger scale (>10 µm) porosity showed the expected logarithmic decrease in porosity with depth, although there was significant variation in each sample group. However, small- and ultra-small-angle neutron scattering data showed that the proportion of small-scale porosity increased with depth. Porosity distributions were not continuous, but consisted of a series of log normal-like distributions at several distinct scales within these rocks. Fractal dimensions at larger scales decreased (surfaces smoothed) with increasing depth, and those at smaller scales increased (surfaces roughened) and pores become more isolated (higher lacunarity). Furthermore, data suggest that changes in pore-size distributions are controlled by both physical (compaction) and chemical effects (precipitation, cementation, dissolution).

58 GEOSCIENCES↗

Is There Ecological Information in Optical Polarization Data?

Optical linear polarization? In remote sensing it's due to specular reflection. The first surface that incident light encounters - a smooth water surface or the waxy first surface of a leaf's cuticle, if it's even somewhat smooth (i.e. shiny) - will specularly reflect and linearly polarize the incident light. We provide three examples of the types of ecological information contained in remotely sensed optical linear polarization measurements. Remove the surface reflection to better see the interior. The linearly polarized light reflected by leaf surfaces contains no information about cellular pigments, metabolites, or water contained in the leaf interiors of a plant canopy, because it never enters the leaf interior to interact with them. Thus, for purposes of remotely sensing the leaf interiors of a plant canopy, the linearly polarized light should be subtracted from the total reflected light, because including it would add noise to the measurement. In particular 'minus specular' vegetation indices should allow improved monitoring of a plant canopy's physiological processes. Estimate plant development stage and yield. Wheat and sorghum grain heads, following emergence, rapidly extend upward and very quickly tower over nearby leaves, partially blocking our view of the sunlight reflected by those leaf surfaces. The resulting decrease in the amount of surface reflected and polarized sunlight, if monitored over time, potentially allows per-field estimates of the dates of the heading and flowering development stages to be interleaved with weather data in models, which is key to better estimating per-field grain yield. Similar polarization changes may occur in other grasses, such as oats, barley, corn and rice, each a crop so widely grown that it potentially affects climate at the regional scale. Wetlands Mapping. The sunlight specularly reflected by surface waters is blindingly bright, spectrally flat and polarized - all of which telegraphs that the ground area is inundated. Inundated soils exchange methane with the atmosphere; non-inundated soils, carbon dioxide. Aquatic plants growing through the water surface pipe the soil-produced methane via the stomata to the atmosphere, enhancing exchanges rates by factors of 10-20 compared to ebullition (bubbling) or diffusion through the water column to the atmosphere. Thus, mapping wetland areas into three community types - inundated areas with emergent vegetation, open water and uplands - provides potentially key information to water, carbon and energy budgets at landscape to global scales.

Water↗

Use of shape-preserving interpolation methods in surface modeling

In many large-scale scientific computations, it is necessary to use surface models based on information provided at only a finite number of points (rather than determined everywhere via an analytic formula). As an example, an equation of state (EOS) table may provide values of pressure as a function of temperature and density for a particular material. These values, while known quite accurately, are typically known only on a rectangular (but generally quite nonuniform) mesh in (T,d)-space. Thus interpolation methods are necessary to completely determine the EOS surface. The most primitive EOS interpolation scheme is bilinear interpolation. This has the advantages of depending only on local information, so that changes in data remote from a mesh element have no effect on the surface over the element, and of preserving shape information, such as monotonicity. Most scientific calculations, however, require greater smoothness. Standard higher-order interpolation schemes, such as Coons patches or bicubic splines, while providing the requisite smoothness, tend to produce surfaces that are not physically reasonable. This means that the interpolant may have bumps or wiggles that are not supported by the data. The mathematical quantification of ideas such as physically reasonable and visually pleasing is examined.

Ftitsch, F. N.↗

Neutral sheet crossings by ISEE-3 in the distant magnetotail

The magnetic field data from ISEE-3 in the distant magnetotail at crossings of the field reversal (or neutral sheet) region are analyzed to determine the instantaneous direction of the normal component B(z) at the crossing. Crossings in the middle of the aberrated magnetotail near the apogee A2 of the first deep-tail orbit of ISEE-3 in January-February, 1983 were selected. Data for an interval of one hour is discussed at length to illustrate some of the difficulties that can occur. One particular smooth crossing at 15:56 UT, February 4, 1983, shows that complicated microstructure can occur in times shorter than one minute; averaging over long times may eliminate essential information for this purpose. By inspecting the magnetic field data at the highest resolution, however, it is shown that the direction of the plasma sheet flows and the sense of B(z) across the neutral sheet do not always agree with the reconnection models. Rather, they indicate that the low latitude boundary layer may play a significant role in the dynamics of the magnetotail.

Heikkila, W. J.↗

Internal conversion and intersystem crossing dynamics based on coupled potential energy surfaces with full geometry-dependent spin–orbit and derivative couplings. Nonadiabatic photodissociation dynamics of NH 3 (A) leading to the NH(X 3 Σ – , a 1 Δ) + H 2 channel

Here we simulate the photodissociation of NH 3 originating from its first excited singlet state S 1 into the NH 2 + H (radical) and NH + H 2 (molecular) channels. The states considered are the ground singlet state S 0 , the first excited singlet state S 1 and the lowest-lying triplet state T 1 , which permit for the first time a uniform treatment of the internal conversion and intersystem crossing. The simulations are based on a diabatic potential energy matrix (DPEM) of S 0 , S 1 coupled by a conical intersection seam, as well as a potential energy surface (PES) for T 1 coupled by spin-orbit coupling (SOC) to the two singlet states. The DPEM and PES are fitted to ab initio electronic structure data (ESD) including energies, energy gradients, and derivative couplings. The DPEM also defines an adiabatic to diabatic state (AtD) transformation, which is used to transform the singular adiabatic SOC into a smooth function of the nuclear coordinates in the diabatic representation, allowing the diabatic SOC to be fit to an analytical functional form. ESD and SOC data obtained from these surfaces can serve as input for either quantum or semi-classical characterization of the nonadiabatic dynamics. Using the SHARC suite of programs, nonadiabatic simulations based on over 40 000 semi-classical trajectories assess the convergence of our results. The production of NH + H 2 is not direct, but is only achieved through a quasi-statistical dissociation mechanism after internal conversion to the ground electronic state. This leads to a much lower yield comparing with the main NH 2 + H channel. The NH(X 3 Σ_) radical produced through the intersystem crossing from S 0 to T 1 is rare (~0.2%) compared to NH(a 1 Δ) due to the process being spin forbidden.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Best recovery of the Laplace operator of a function from incomplete spectral data

This paper is concerned with the problem of best recovery for a fractional power of the Laplacian of a smooth function on R{sup d} from an exact or approximate Fourier transform for it, which is known on some convex subset of R{sup d}. A series of optimal recovery methods is constructed. Information about the Fourier transform outside some ball centred at the origin proves redundant--it is not used by the optimal methods. These optimal methods differ in the way they 'process' key information. Bibliography: 12 titles.

97 MATHEMATICS AND COMPUTING↗

On discrepancy between ATIC and Fermi data

Either ATIC or Fermi-LAT data can be fitted together with the PAMELA data by three components: primary background ∼ E{sup −3.3}, secondary background ∼ E{sup −3.6}, and an additional source of electrons ∼ E{sup −γ{sub a}}Exp(−E/E{sub cut}). We find that the best fits for ATIC + PAMELA and for Fermi + PAMELA are approximately the same, γ{sub a} ≈ 2 and E{sub cut} ∼ 500 GeV. However, the ATIC data have a narrow bump between 300 GeV and 600 GeV which contradicts the smooth Fermi spectrum. An interpretation of the ATIC bump as well as the featureless Fermi spectrum in terms of dark matter models and pulsars is discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Revisit NGC 5466 tidal stream with Gaia , SDSS/SEGUE, and LAMOST

ABSTRACT By mining the data from Gaia Early Data Release 3, Sloan Digital Sky Survey/Sloan Extension for Galactic Understanding and Exploration Data Release 16, and Large Sky Area Multi-Object Fiber Spectroscopic Telescope Data Release 8, 11 member stars of the NGC 5466 tidal stream are detected and 7 of them are newly identified. To reject contaminators, a variety of cuts are applied in sky position, colour–magnitude diagram, metallicity, proper motion, and radial velocity. We compare our data to a mock stream generated by modelling the cluster’s disruption under a smooth Galactic potential plus the Large Magellanic Cloud (LMC). The concordant trends in phase space between the model and observations imply that the stream might have been perturbed by the LMC. The two most distant stars among the 11 detected members trace the stream’s length to 60° of sky, supporting and extending the previous length of 45°. Given that NGC 5466 is so distant and potentially has a longer tail than previously thought, we expect that the NGC 5466 tidal stream could be a useful tool in constraining the Milky Way gravitational field.

79 ASTRONOMY AND ASTROPHYSICS↗

Empirical Determination of Dark Matter Velocities Using Metal-Poor Stars

The Milky Way dark matter halo is formed from the accretion of smaller subhalos. These sub-units also harbor stars—typically old and metal-poor—that are deposited in the Galactic inner regions by disruption events. In this report, we show that the dark matter and metal-poor stars in the Solar neighborhood share similar kinematics due to their common origin. Using the high-resolution eris simulation, which traces the evolution of both the dark matter and baryons in a realistic Milky Way analog galaxy, we demonstrate that metal-poor stars are indeed effective tracers for the local, virialized dark matter velocity distribution. The local dark matter velocities can therefore be inferred from observations of the stellar halo made by the Sloan Digital Sky Survey within 4 kpc of the Sun. This empirical distribution differs from the standard halo model in important ways and suggests that the bounds on the spin-independent scattering cross section may be weakened for dark matter masses below ~10 GeV. Data from Gaia will allow us to further refine the expected distribution for the smooth dark matter component, and to test for the presence of local substructure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SU-E-I-45: Reconstruction of CT Images From Sparsely-Sampled Data Using the Logarithmic Barrier Method

Purpose: To develop and investigate whether the logarithmic barrier (LB) method can result in high-quality reconstructed CT images using sparsely-sampled noisy projection data Methods: The objective function is typically formulated as the sum of the total variation (TV) and a data fidelity (DF) term with a parameter λ that governs the relative weight between them. Finding the optimized value of λ is a critical step for this approach to give satisfactory results. The proposed LB method avoid using λ by constructing the objective function as the sum of the TV and a log function whose augment is the DF term. Newton's method was used to solve the optimization problem. The algorithm was coded in MatLab2013b. Both Shepp-Logan phantom and a patient lung CT image were used for demonstration of the algorithm. Measured data were simulated by calculating the projection data using radon transform. A Poisson noise model was used to account for the simulated detector noise. The iteration stopped when the difference of the current TV and the previous one was less than 1%. Results: Shepp-Logan phantom reconstruction study shows that filtered back-projection (FBP) gives high streak artifacts for 30 and 40 projections. Although visually the streak artifacts are less pronounced for 64 and 90 projections in FBP, the 1D pixel profiles indicate that FBP gives noisier reconstructed pixel values than LB does. A lung image reconstruction is presented. It shows that use of 64 projections gives satisfactory reconstructed image quality with regard to noise suppression and sharp edge preservation. Conclusion: This study demonstrates that the logarithmic barrier method can be used to reconstruct CT images from sparsely-amped data. The number of projections around 64 gives a balance between the over-smoothing of the sharp demarcation and noise suppression. Future study may extend to CBCT reconstruction and improvement on computation speed.

60 APPLIED LIFE SCIENCES↗

FleCSPH - a parallel and distributed SPH implementation based on the FleCSI framework

FleCSPH is a multi-physics compact application that exercises FleCSI parallel data structures for tree-based particle methods. In particular, FleCSPH implements a smoothed-particle hydrodynamics (SPH) solver for the solution of Lagrangian problems in astrophysics and cosmology. FleCSPH includes support for gravitational forces using the fast multipole method (FMM).

Junghans, Christoph↗