SEARCH · Engineering Papers

Results for “data requirements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Future experimental needs to support applied aerodynamics - A transonic perspective

Advancements in facilities, test techniques, and instrumentation are needed to provide data required for the development of advanced aircraft and to verify computational methods. An industry survey of major users of wind tunnel facilities at Langley Research Center (LaRC) was recently carried out to determine future facility requirements, test techniques, and instrumentation requirements; results from this survey are reflected in this paper. In addition, areas related to transonic testing at LaRC which are either currently being developed or are recognized as needing improvements are discussed.

Gloss, Blair B.↗

NASA NTRS1992

Preliminary results from the High Speed Airframe Integration Research project

A review is presented of the accomplishment of the near term objectives of developing an analysis system and optimization methods during the first year of the NASA Langley High Speed Airframe Integration Research (HiSAIR) project. The characteristics of a Mach 3 HSCT transport have been analyzed utilizing the newly developed process. In addition to showing more detailed information about the aerodynamic and structural coupling for this type of vehicle, this exercise aided in further refining the data requirements for the analysis process.

Coen, Peter G.↗

NASA NTRS1992

Axially symmetric pulse propagation in semi-infinite hollow cylinders

The effects of dispersion and end conditions on axially symmetric pulse propagation in semiinfinite tubes are investigated. Numerical modeling of the dynamic response is accomplished using a stable and efficient finite element and wave propagation based method. This method yields the dispersive and modal data required to express displacements in a frequency domain modal expansion. Boundary conditions are applied to the tube end to obtain mode amplitudes. A fast Fourier transform is then used to get the time response. The specific end conditions considered are intended to give some insight into how the tube would behave as a member of a jointed truss structure.

Kohl, T.↗

NASA NTRS1993

NetView technical research

This is the Final Technical Report for the NetView Technical Research task. This report is prepared in accordance with Contract Data Requirements List (CDRL) item A002. NetView assistance was provided and details are presented under the following headings: NetView Management Systems (NMS) project tasks; WBAFB IBM 3090; WPAFB AMDAHL; WPAFB IBM 3084; Hill AFB; McClellan AFB AMDAHL; McClellan AFB IBM 3090; and Warner-Robins AFB.

Source record↗

NASA NTRS1993

Proposed ground-based control of accelerometer on Space Station Freedom

This paper describes the innovative control of an accelerometer to support the needs of the scientists operating science experiments that are on-board Space Station Freedom (SSF). Accelerometers in support of science experiments on the shuttle have typically been passive, record-only devices that present data only after the mission or that present limited data to the crew or ground operators during the mission. With the advent of science experiment operations on SSF, the principal investigators will need microgravity acceleration data during, as well as after, experiment operations. Because their data requirements may change during the experiment operations, the principal investigators will be allocated some control of accelerometer parameters. This paper summarizes the general-purpose Space Acceleration Measurement System (SAMS) operation that supports experiments on the shuttle and describes the control of the SAMS for Space Station Freedom. Emphasis is placed on the proposed ground-based control of the accelerometer by the principal investigators.

Delombard, Richard↗

NASA NTRS1993

Dynamic analysis of spur gears using computer program DANST

DANST is a computer program for static and dynamic analysis of spur gear systems. The program can be used for parametric studies to predict the effect on dynamic load and tooth bending stress of spur gears due to operating speed, torque, stiffness, damping, inertia, and tooth profile. DANST performs geometric modeling and dynamic analysis for low- or high-contact-ratio spur gears. DANST can simulate gear systems with contact ratio ranging from one to three. It was designed to be easy to use, and it is extensively documented by comments in the source code. This report describes the installation and use of DANST. It covers input data requirements and presents examples. The report also compares DANST predictions for gear tooth loads and bending stress to experimental and finite element results.

Oswald, Fred B.↗

NASA NTRS1993

Image registration for luminescent paint applications

The use of pressure sensitive luminescent paints is a viable technique for the measurement of surface pressure on wind tunnel models. This technique requires data reduction of images obtained under known as well as test conditions and spatial transformation of the images. A general transform which registers images to subpixel accuracy is presented and the general characteristics of transforms for image registration and their derivation are discussed. Image resection and its applications are described. The mapping of pressure data to the three dimensional model surface for small wind tunnel models to a spatial accuracy of 0.5 percent of the model length is demonstrated.

Bell, James H.↗

NASA NTRS1993

Upper limit on Titan's atmospheric argon abundance

An analysis is conducted on the Voyager 1 UV Spectrometer solar-occultation data and a Titan flyby spectrum of the north polar region dayglow, in order to infer the tropopausal Ar mixing ratio's upper limit as a function of the CH4 mixing ratio, f(CH4). The mole-fraction upper limit of tropopausal Ar mixing ratio ranges from 0.01 to 0.1 at f(CH4) of 0.026 to as low as 0.08 at f(CH4) of 0.05. Since the best fits to the solar occultation data require f(CH4) of more than 0.26, the Ar mixing ratio must be lower than 0.1.

Strobel, Darrell F.↗

NASA NTRS1993

Dynamic analysis of spur gears using computer program DANST

Oswald, Fred B.↗

NASA NTRS1993

Aerodynamic inverse design and analysis for a full engine

A numerical design methodology for multistage turbomachinery is being developed that minimizes the use of experimental data required in the design process. This approach is resulting in an efficient method of enlarging the design database for turbomachinery blading. This capability has been demonstrated for blade sections, and the goal is to extend it to fully three dimensional, multistage configurations.

Sanz, Jose M.↗

NASA NTRS1993

Proposed ground-based control of accelerometer on Space Station Freedom

Delombard, Richard↗

NASA NTRS1985

Remote sensing of wetland biomass and productivity for global biosystem research

The study of ecosystem function and the contributions of particular ecosystems to global elemental cycling will require data collection from orbital platforms. Presently used ground sampling techniques are not adequate for large area vegetation assessments. The research was directed toward an understanding of the relationship between spectral radiance and plant canopy biomass. Changes in the architecture of the canopy alters the observed spectral radiance patterns. The green components of a plant canopy interacts most strongly with incident radiation and usually reflect edaphic conditions as they relate to plant vigor. Plant biomass serves as an excellent integrator of the environmental factors encountered by the plant and can be used as an indicator for predicting soil redox, nutrient status, microbial activity, etc. The use was examined of TM spectral data to discriminate biomass classes and, in turn, to relate the biomass classes to the chemical status of the soil. Several preliminary studies have indicated that solar angle can be used to improve biomass predictions. This important observation also suggests that latitudinal extrapolation of the biomass predicting models will be possible if selected characteristics of the incident radiation are known.

Hardisky, M. A.↗

NASA NTRS1931

The dangerous flat spin and the factors affecting it

This report deals first with the fundamental data required for the investigation. These are chiefly the aerodynamic forces and moments acting on an airplane in a flat spin. It is shown that these forces and moments depend principally on the angle of attack and on the rotation about the path axis, and can therefore either be measured in a wind tunnel or calculated from wind-tunnel measurements of lift, drag and moment about the leading edge of the wing of an airplane model at rest. The lift, drag and moments about the span axis are so greatly altered by the rapid rotation in a flat spin, that they can no longer be regarded as independent of rotation. No substantial change in the angles of attack and glide occurring in a flat spin is involved. The cross-wind force, as compared with the lift and drag, can be disregarded in a flat spin.

Fuchs, Richard↗

NASA NTRS1993

Minutes of the Sixth CEOS Plenary Meeting

The Committee on Earth Observations Satellites (CEOS) minutes for the sixth plenary meeting held in London, December 9-11, 1992 are presented. Attending as prospective members were the Russian Space Agency (RSA), the Committee for Hydrometeorology and Environmental Monitoring of the Ministry for Ecology and Natural resources of the Russian Federation (ROSCOMGIDROMET), the Chinese Academy of Space Technology (CAST) and the National Remote Sensing Center of China (NRSCC). Actions taken at the meeting included membership issues, CEOS proposals, data policy, and working group reports. Data requirements of CEOS affiliates were also reported on. Additional summations and statements as well as lists of participants and future meetings are included. In general, topics covered related to remote sensing and global change.

Source record↗

NASA NTRS1993

Effects of rotation on coolant passage heat transfer. Volume 2: Coolant passages with trips normal and skewed to the flow

An experimental program was conducted to investigate heat transfer and pressure loss characteristics of rotating multipass passages, for configurations and dimensions typical of modem turbine blades. This experimental program is one part of the NASA Hot Section Technology (HOST) Initiative, which has as its overall objective the development and verification of improved analysis methods that will form the basis for a design system that will produce turbine components with improved durability. The objective of this program was the generation of a data base of heat transfer and pressure loss data required to develop heat transfer correlations and to assess computational fluid dynamic techniques for rotating coolant passages. The experimental work was broken down into two phases. Phase 1 consists of experiments conducted in a smooth wall large scale heat transfer model. A detailed discussion of these results was presented in volume 1 of a NASA Report. In Phase 2 the large scale model was modified to investigate the effects of skewed and normal passage turbulators. The results of Phase 2 along with comparison to Phase 1 is the subject of this Volume 2 NASA Report.

Johnson, B. V.↗

NASA NTRS1993

Martian lavas: Three complementary remote sensing techniques to derive flow properties

Several remote sensing techniques have been developed to determine various properties of lava flows. We are currently focusing on three such techniques to interpret Martian lava flows on Alba Patera, which are based on measurements of distal flow lobe widths which can be used to infer silica content; convolution of flow margins which can distinguish between pahoehoe and a'a types of basaltic flows; final flow field dimensions which can be combined with ground slope to derive effusion duration and average effusion rate. These methods are extremely complementary and together provide a more significant and complete understanding of extra-terrestrial lava flows. However, each of these techniques have specific and distinct data requirements.

Lopes-Gautier, R.↗

NASA NTRS1993

Curved grating fabrication techniques for concentric-circle grating, surface-emitting semiconductor lasers

We describe the fabrication and operational characteristics of a novel, surface-emitting semiconductor laser that makes use of a concentric-circle grating to both define its resonant cavity and to provide surface emission. A properly fabricated circular grating causes the laser to operate in radially inward- and outward-going circular waves in the waveguide, thus, introducing the circular symmetry needed for the laser to emit a beam with a circular cross-section. The basic circular-grating-resonator concept can be implemented in any materials system; an AlGaAs/GaAs graded-index, separate confinement heterostructure (GRINSCH), single-quantum-well (SQW) semiconductor laser, grown by molecular beam epitaxy (MBE), was used for the experiments discussed here. Each concentric-circle grating was fabricated on the surface of the AlGaAs/GaAs semiconductor laser. The circular pattern was first defined by electron-beam (e-beam) lithography in a layer of polymethylmethacrylate (PMMA) and subsequently etched into the semiconductor surface using chemically-assisted (chlorine) ion-beam etching (CAIBE). We consider issues that affect the fabrication and quality of the gratings. These issues include grating design requirements, data representation of the grating pattern, and e-beam scan method. We provide examples of how these techniques can be implemented and their impact on the resulting laser performance. A comparison is made of the results obtained using two fundamentally different electron-beam writing systems. Circular gratings with period lambda = 0.25 microns and overall diameters ranging from 80 microns to 500 microns were fabricated. We also report our successful demonstration of an optically pumped, concentric-circle grating, semiconductor laser that emits a beam with a far-field divergence angle that is less than one degree. The emission spectrum is quite narrow (less than 0.1 nm) and is centered at wavelength lambda = 0.8175 microns.

Jordan, Rebecca H.↗

NASA NTRS1990

Physical retrieval of precipitation water contents from Special Sensor Microwave/Imager (SSM/I) data. Part 1: A cloud ensemble/radiative parameterization for sensor response (report version)

The physical retrieval of geophysical parameters based upon remotely sensed data requires a sensor response model which relates the upwelling radiances that the sensor observes to the parameters to be retrieved. In the retrieval of precipitation water contents from satellite passive microwave observations, the sensor response model has two basic components. First, a description of the radiative transfer of microwaves through a precipitating atmosphere must be considered, because it is necessary to establish the physical relationship between precipitation water content and upwelling microwave brightness temperature. Also the spatial response of the satellite microwave sensor (or antenna pattern) must be included in the description of sensor response, since precipitation and the associated brightness temperature field can vary over a typical microwave sensor resolution footprint. A 'population' of convective cells, as well as stratiform clouds, are simulated using a computationally-efficient multi-cylinder cloud model. Ensembles of clouds selected at random from the population, distributed over a 25 km x 25 km model domain, serve as the basis for radiative transfer calculations of upwelling brightness temperatures at the SSM/I frequencies. Sensor spatial response is treated explicitly by convolving the upwelling brightness temperature by the domain-integrated SSM/I antenna patterns. The sensor response model is utilized in precipitation water content retrievals.

Olson, William S.↗