Electron-impact spectroscopy
The methods of electron impact spectroscopy and cross section measurements are discussed and compared to optical spectroscopy. A brief summary of the status of this field and the available data is given.
Trajmar, S.↗
SEARCH · Engineering Papers
Results for “cross section data”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A model for lava flows with two thermal components
This paper presents a mathematical model for the cooling of an active flow with two separate thermal components, one of which is a crust that cools by radiation and thickens with time and the other an inner core that is vertically isothermal and partially exposed at the top surface, where heat is lost by radiation. This model provides a more realistic description of active lava flows than the existing models that assume thermal homogeneity in each vertical cross section perpendicular to the direction of flow advance. The results of the model were found to compare favorably with existing field data. The effects of different crustal thickening rates, fractional areas of crust, and eruption temperatures on the cooling of the two thermal components were examined.
Crisp, Joy↗
Reconstruction of O3 and N2O fields from ER-2, DC-8, and balloon observations
Measurements of N2O and O3 during the Airborne Arctic Stratospheric Expedition have been composited using the potential vorticity and potential temperature of each measurement as coordinates. For ozone, data sources included the ER-2 and balloon ozonesonde in situ measurements, DC-8 DIAL lidar, and Stratospheric Aerosol and Gas Experiment satellite profiles. For N2O, only ER-2 data were used. These chemical composites have been reconstructed onto average meteorological fields for the mission in a latitude-altitude cross section, yielding a picture of the chemical composition of the polar vortex during this period. Tracers inside the vortex show an apparent descent of about 2 km relative to those outside, resulting in an apparent chemical edge on isentropic and isobaric surfaces.
Schoeberl, Mark R.↗
Ionosphere-exosphere coupling through charge exchange and momentum transfer in hydrogen-proton collisions
The implications of a traditional assumption of exospheric physics, that collisions of hydrogen atoms and protons preferentially result in charge exchange with negligible momentum transfer are examined. Initially adopted as a necessary convenience to accommodate limited computer resources in exosphere model calculations, this approximation results in a direct transformation of the proton velocity distribution into a hot component of neutral hydrogen. With expanding computational facilities, the need for the approximation has passed. As the first step toward its replacement with a realistic, quantum mechanical model of the H - H(+) collision process, differential and cumulative cross sections were calculated for quantum elastic scattering of indistinguishable nuclei for a fine grid of encounter energies and scattering angles. These data are used to study the nature of ionosphere-exosphere coupling through H - H(+) collisions, and to demonstrate that the distribution of velocities of scattered H produced in the traditional exospheric charge exchange approximation, as well as that arising from an alternative, fluid dynamic approach, leads to unacceptable abundances of coronal atoms in long-term, highly elliptic trajectories.
Hodges, R. R., Jr.↗
Polarimetric Radar Signatures Of Frozen And Thawed Forests
Report summarizes study of radiometrically and polarimetrically calibrated data from airborne synthetic-aperture-radar images of single-species forest stands in frozen and thawed conditions. Copolarization radar cross sections found as much as 6 dB less in frozen than in thawed condition. Effect attributed to fact that dielectric constants are greater in thawed condition. More-subtle differences determined by computing two features of statistics of Strokes matrices over resolution elements of each forest stand.
Kwok, Ronald↗
Potential Energy Curves and Transport Properties for the Interaction of He with Other Ground-state Atoms
The interactions of a He atom with a heavier atom are examined for 26 different elements, which are consecutive members selected from three rows (Li - Ne, Na - Ar, and K,Ca, Ga - Kr) and column 12 (Zn,Cd) of the periodic table. Interaction energies are determined wing high-quality ab initio calculations for the states of the molecule that would be formed from each pair of atoms in their ground states. Potential energies are tabulated for a broad range of Interatomic separation distances. The results show, for example, that the energy of an alkali interaction at small separations is nearly the same as that of a rare-gas interaction with the same electron configuration for the dosed shells. Furthermore, the repulsive-range parameter for this region is very short compared to its length for the repulsion dominated by the alkali-valence electron at large separations (beyond about 3-4 a(sub 0)). The potential energies in the region of the van der Waals minimum agree well with the most accurate results available. The ab initio energies are applied to calculate scattering cross sections and obtain the collision integrals that are needed to determine transport properties to second order. The theoretical values of Li-He total scattering cross sections and the rare-gas atom-He transport properties agree well (to within about 1%) with the corresponding measured data. Effective potential energies are constructed from the ab initio energies; the results have been shown to reproduce known transport data and can be readily applied to predict unknown transport properties for like-atom interactions.
Partridge, Harry↗
Effective Potential Energies and Transport Cross Sections for Atom-Molecule Interactions of Nitrogen and Nitrogen
The potential energy surfaces for H2-N and N2-N interactions are calculated by accurate ab initio methods and applied to determine transport data. The results confirm that an effective potential energy for accurately determining transport properties can be calculated using a single orientation. A simple method is developed to determine the dispersion coefficients of effective potential energies Effective potential energies required for O2-O collisions are determ=ined. The H2-N, N2-N, O2-H, and O2-O collision integrals are calculated and tabulated for a large range of temperatures. The theoretical values of the N2-N and O2-O diffusion coefficients compare well with measured data available at room temperature.
Stallcop, James R.↗
UV photoabsorption cross sections of CO, N2, and SO2 for studies of the ISM and planetary atmospheres
We report high-resolution laboratory measurements of photoabsorption cross sections of CO, N2, and SO2 in the wavelength range 80 to 320 nm. The motivation is to provide the quantitative data that are needed to analyze observations of absorption by, and to model photochemical processes in, the interstellar medium and a number of planetary atmospheres. Because of the high resolution of the spectrometers used, we can minimize distortion of the spectrum that occurs when instrument widths are greater than the widths of spectral features being measured. In many cases, we can determine oscillator strengths of individual rotational lines - a unique feature of our work.
Smith, Peter L.↗
Spray Cooling Trajectory Angle Impact Upon Heat Flux Using a Straight Finned Enhanced Surface
Experiments were conducted to study the effects of spray trajectory angles upon heat flux for flat and enhanced surface spray cooling. The surface enhancement consisted of straight fins machined on the top surface of a copper heater block. Spray cooling curves were obtained with the straight fin surface aligned both parallel (axial) and perpendicular (transverse) to the spray axis. Measurements were also obtained on a flat surface heater block for comparison purposes. Each copper block had a cross-sectional area of 2.0 sq cm. A 2x2 nozzle array was used with PF-5060 as the working fluid. Thermal performance data was obtained under nominally degassed (chamber pressure of 41.4 kPa) conditions. Results show that the maximum CHF in all cases was attained for a trajectory angle of 30' from the surface normal. Furthermore, trajectory angles applied to straight finned surfaces can have a critical heat flux (CHF) enhancement as much as 75% (heat flux value of 140 W/sq cm) relative to the vertical spray orientation for the analogous flat surface case under nominally degassed conditions.
Silk, Eric A.↗
Critical Evaluation of Chemical Reaction Rates and Collision Cross Sections of Importance in the Earth's Upper Atmosphere and the Atmospheres of Other Planets, Moons, and Comets
We propose to establish a long-term program of critical evaluation by domain experts of the rates and cross sections for atomic and molecular processes that are needed for understanding and modeling the atmospheres in the solar system. We envision data products resembling those of the JPL/NASA Panel for Data Evaluation and the similar efforts of the international combustion modeling community funded by US DoE and its European counterpart.
Huestis, David L.↗
Total Cross Section Parameterizations for Pion Production in Nucleon-Nucleon Collisions
Total cross section parameterizations for neutral and charged pion production in nucleon-nuelcon collisions are compared to an extensive set of experimental data over the projectile momentum range from threshold to 300 GeV. Both proton-proton and proton-neutron reactions are considered. Good agreement between parameterizations and experiment is found, and therefore the parameterizations will be useful for applications, such as transport codes.
Norbury, John W.↗
Re-examination of a Classic Experiment to Measure the Positronium-Helium Cross Section
In 1975, before the advent of positronium beams, a clever experiment was carried out in an attempt to measure low-energy Ps-atom scattering cross-sections, especially that of Ps-He. A series of parallel thin plates was placed in the vessel containing the sample of gas, and positrons were allowed to enter the chamber from a radioactive source. The time spectrum of annihilation radiation was observed in the traditional way, and the pickoff annihilation due to thermalized Ps striking one of the plates was to be the special feature of the experiment. Using a diffusion analysis the authors derived cross- sections for several gases, and for helium the value obtained was sigma = 0.0166 pi(alpha)(sub o, sup 2). Even then this value was thought to be very much too small, while recent measurements and some calculations suggest a more reasonable value would be sigma = 3 to 13 pi(alpha)(sub o,sup 2). It has always been puzzling that an apparently well-designed experiment should give such an unsatisfactory result. We have now re-examined the analysis of the data with some interesting consequences which may explain the discrepancy. Two main observations support our re-analysis. First, we note that the mean free path for Ps-He scattering would be quite long if the cross-section were as small as that quoted above; the diffusion method itself would seem to be questionable. For the larger values, however, there would be no such problem. Second, it was assumed that when the annihilation rate had settled down and was following an exponential decay curve the asymptotic solution of the diffusion equation had been reached. We find, instead, that a superposition of exponentials can accurately represent the decay curve, consistent with the higher cross-section value.
Drachman, Richard J.↗
Analysis of Atmospheric Conditions Responsible for an Ozone Exceedance Event in Southeast Virginia on June 15, 2022
On June 15, 2022, the Virginia Department of Environmental Quality monitoring site at Suffolk/Holland, a rural site in southeast Virginia, recorded its first ozone exceedance since 2016. An ozone exceedance day occurs when the daily maximum 8-hour average surface ozone concentration is greater than 70 ppb. On this day, it was 75 ppb. This event is also noteworthy due to the rapid increase in surface ozone between 6 am and 9 am EDT as well as the hourly maximum ozone concentration of 82 ppb that was measured at 1 pm EDT. In this analysis, we utilize various observational and model data to determine the atmospheric conditions responsible for this ozone exceedance event. The analysis is conducted in two parts: (1) an evaluation of the accuracy of the GEOS-CF and WRF-Chem model forecasts and (2) an investigation of the mechanisms responsible for the high surface ozone at the Virginia DEQ Suffolk/Holland monitoring site. Comparisons of model forecasted ozone time-height cross sections with measured ozone by lidars from the Tropospheric Ozone Lidar Network (TOLNet) at NASA Langley and NASA Goddard reveal that both models forecasted ozone reasonably well near the surface. Model and observational data reveal that an upper-level ridge was present over much of the eastern United States, with a broad anticyclonic circulation near the surface, resulting in north-northeasterly flow over southeast Virginia. Back trajectory calculations using the Hybrid Single-Particle Lagrangian Integrated Trajectory model (HYSPLIT) and model data suggest that a low-level plume rich in ozone and precursor species originating from the New York City and New Jersey region was transported along the east coast between June 14 and June 15, arriving in southeast Virginia around 6 am EDT on June 15. In the early morning hours, this plume mixed down to the surface, elevating the background ozone mixing ratio as well as the mixing ratios of several precursor species. Other potential contributions are also explored and discussed. Lastly, the authors note that this work represents the analysis of the authors and not the Virginia Department of Environmental Quality.
Daniel B Phoenix↗
Wave-Plan Analysis of Unsteady Flow
An analytical method for computing unsteady flow conditions in liquid-filled flow systems is developed. The method which is called the wave plan incorporates distributed parameter and nonlinear effects including the effects of viscous resistance. The wave plan is essentially a solution synthesized from the effects of incremental step pressure pulses. The pressure pulses are generated because of incremental flow-rate changes that originate in a hydraulic system from a variety of sources, including the mechanical motion of the system structure. The pressure pulses propagate throughout the system at sonic velocity and are partially transmitted and reflected at each discontinuity. The velocity change caused by each pressure pulse is obtained from the Joukowski relation. Pressure and velocity time histories at any point in the system are obtained by a timewise summation of the contributions of the incremental pressure pulses passing that point. The analysis is presented in a form general enough to be applied to a variety of hydraulic systems. To illustrate the application of the method to a specific system, the response of a straight hydraulic line to a sinusoidal orifice-area variation of an upstream valve is computed. Both a constant-cross- section line and a tapered line are analyzed in the examples, and various nonlinear effects evaluated. Comparisons are carried out with experimental data obtained for the constant-diameter line and good agreement is shown to exist.
UNSTEADY FLOW↗
Electron interaction in matter
Data on the scattering of 1-MeV electrons in aluminum for the case of non-normal incidence, electron-bremsstrahlung cross-sections in thin targets, and the production of bremstrahlung by electron interaction in thick targets, are presented both in tabular and graphic form. These results may interest physicists and radiologists.
Dance, W. E.↗
Collapse of long cylindrical shells under combined bending and pressure loads
The nonlinear collapse behavior of long cylindrical shell structures subject to a bending load only or combined bending and uniform normal pressure loads is studied using the STAGS computer code. Two modes of nonlinear collapse are investigated to determine maximum strength. One mode of collapse is described by circumferential flattening of the cylinder cross section, while the other mode is represented by axial wrinkling in the region of maximum compression. Results compare favorably with available published data for cylinders loaded by pure bending, and results are presented for combined loads which have not been previously reported. The collapse loads obtained in this study show that current design criteria are conservative except for a narrow range of length-to-radius ratios and pressures.
Stephens, W. B.↗
The IRAS telescope
The IRAS telescope is described in terms of its system configuration and physical characteristics, subsystem functions and descriptions, and performance characteristics. The mission and the configuration are reviewed briefly, and the major functional components of the telescope are described, including the focal plane assembly, the optics, the electronics, the cryogenics, and the thermal control. Exploded and cross-sectional views and block diagrams are presented for the telescope system configuration, focal plane assembly, infrared subarray module, optical subsystem, infrared channel data flow, and main cryogen dewar. The telescope physical characteristics are listed. The performance characteristics are listed and discussed, including the spectral response, sensitivity, optical quality, and photometric accuracy. Relative system spectral response curves for the infrared bands are shown.
Irace, W.↗
External calibration of SIR-B imagery with area-extended and point targets
Data-takes on two ascending orbits of the Shuttle Imaging Radar-B (SIR-B) over an agricultural test site in west-central Illinois were used to establish end-to-end transfer functions for conversion of the digital numbers on the 8-bit image to values of the radar backscattering coefficient sigma sup 0 (sq m/sq. m) in dB. The transfer function for each data-take was defined by the SIR-B response to an array of six calibrated point targets of known radar cross-section (transponders) and to a large number of area-extended targets also with known radar cross-section as measured by externally calibrated, truck-mounted scatterometers. The radar cross-section of each transponder at the SIR-B center frequency was measured on an antenna range as a function of local angle of incidence. Two truck-mounted scatterometers observed 20 to 80 agricultural fields daily at 1.6 GHz with HH polarization and at azimuth viewing angles and incidence angles equivalent to those of the SIR-B. The form of the transfer function is completely defined by the SIR-B receiver and the incoherent averaging procedure incorporated into production of the standard SIR-B image product.
Dobson, M. C.↗