SEARCH · Engineering Papers

Results for “corrections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Optimal location of actuators for correcting distortions due to manufacturing errors in large truss structures

A continuum approximation to the calculation of the statistical properties of the corrected shape of a beam truss is presented, and results of a comparison with the exact statistical analysis were found to be very good. In addition, the position of the actuators was optimized to minimize the weighted rms of the distortion using the continuum analysis. The optimal design is shown to be 13.6 percent better than a uniform design for a parabolic weighting function. It was also found that actuators located on the beam face elements were more effective than actuators located on the diagonal elements.

Burdisso, R.↗

NASA NTRS1988

Enhanced image products by limb-correction and smoothing of VAS radiance measurements

Limb darkening and brightening affect the GOES satellite's VISSR Atmospheric Sounder instrument's imagery with varying satellite viewing angles and instrument noise; limb effects are also associated with a vertical shift of a wavelength's characteristic weighting function. The radiances in an image can be normalized to a reference zenith angle by limb-correcting the image. An additional undesirable effect is that of instrument noise, which varies as a function of channel characteristics and is greatest for channels sensitive to the upper atmosphere. The statistical structure function analysis method of Hillger et al. (1987) is used to obtain noise levels and optimal spatial averaging distances; the averaging domain size from the analysis is used to produce smoothed images, via a running average technique.

Jones, Andrew S.↗

NASA NTRS1988

Methods of correction for the 'wet' atmosphere in estimating baseline lengths from VLBI

The error in VLBI estimates of baseline length caused by unmodelled variations in the propagation path through the atmosphere is greater for longer baselines. Series of estimates of baseline lengths obtained using different methods to correct for the propagation delay caused by atmospheric water vapor are presented and discussed. The main methods are use of data from: a water-vapor radiometer (WVR) and Kalman-filtering of the VLBI data themselves to estimate the propagation delay. Since the longest timespan of WVR data associated with geodetic VLBI experiments was obtained at the Onsala Space Observatory in Sweden, results are presented for the following three baselines: (1) Onsala-Wettzell, FRG (920 km), (2) Onsala-Haystack/Westford, MA (5600 km), and (3) Onsala-Owens Valley (7914 km).

Elgered, G.↗

NASA NTRS1988

Array feed synthesis for correction of reflector distortion and Vernier beamsteering

An algorithmic procedure for the synthesis of planar array feeds for paraboloidal reflectors is described which simultaneously provides electronic correction of systematic reflector surface distortions as well as a Vernier electronic beamsteering capability. Simple rules of thumb for the optimum chioce of planar array feed configuration (i.e., the number and type of elements) are derived from a parametric study made using the synthesis procedure. A number of f/D ratios and distortion models were examined that are typical of large paraboloidal reflectors. Numerical results are presented showing that, for the range of distortion models considered, good on-axis gain restoration can be achieved with as few as seven elements. For beamsteering to +/- 1 beamwidth (BW), 19 elements are required. For arrays with either 7 or 19 elements, the results indicate that the use of high-aperture-efficiency elements (e.g., disk-on-rod and short backfire) in the array yields higher system gain than can be obtained with elements having lower aperture efficiency (e.g., open-ended waveguides). With 37 elements, excellent gain and beamsteering performance to +/- 1.5 BW are obtained independent of the assumed effective aperture of the array element. An approximate expression is derived for the focal-plane field distribution of the distorted reflector. Contour plots of the focal-plane fields are also presented for various distortion and beam scan angle cases. The results obtained show the effectiveness of the array feed approach.

Blank, Stephen J.↗

NASA NTRS1988

Radiometric calibration requirements and atmospheric correction

The need for independent, radundant, absolute radiometric calibration methods is discussed with reference to the Thematic Mapper. Uncertainty requirements for absolute calibration of between 0.5 percent and 4 percent are defined based on the accuracy of reflectance retrievals at an agricultural site. It is shown that even very approximate atmospheric corrections can reduce the error in reflectance retrieval to 0.02 over the reflectance range 0 to 0.4.

Slater, Philip N.↗

NASA NTRS1989

Evaluating atmospheric correction models for retrieving surface temperatures from the AVHRR over a tallgrass prairie

The effects of atmospheric attenuation on surface radiative temperatures obtained by the AVHRR over a tallgrass prairie area in the Flint Hills of Kansas are examined. Six atmospheric correction models developed primarily for sea-surface temperature studies are used to test their utility for retrieval of radiative temperatures over the land surface. An uncertainty of + or - 3.0 C was found for the AVHRR data, and used to evaluate the performance of a given model. When the difference between in situ and AVHRR surface temperatures was smaller than the uncertainty, the model was judged to be adequate. Among the six models evaluated, only the NOAA split-window model consistently adjusted the AVHRR surface temperatures within + or - 3.0 C of the in situ measurements.

Cooper, D. I.↗

NASA NTRS1989

A correction algorithm for particle size distribution measurements made with the forward-scattering spectrometer probe

A correction algorithm for evaluating the particle size distribution measurements of atmospheric aerosols obtained with a forward-scattering spectrometer probe (FSSP) is examined. A model based on Poisson statistics is employed to calculate the average diameter and rms width of the particle size distribution. The dead time and coincidence errors in the measured number density are estimated. The model generated data are compared with a Monte Carlo simulation of the FSSP operation. It is observed that the correlation between the actual and measured size distribution is nonlinear. It is noted that the algorithm permits more accurate calculation of the average diameter and rms width of the distribution compared to uncorrected measured quantities.

Lock, James A.↗

NASA NTRS1989

Corrections to the thin wall approximation in general relativity

The question is considered whether the thin wall formalism of Israel applies to the gravitating domain walls of a lambda phi(exp 4) theory. The coupled Einstein-scalar equations that describe the thick gravitating wall are expanded in powers of the thickness of the wall. The solutions of the zeroth order equations reproduce the results of the usual Israel thin wall approximation for domain walls. The solutions of the first order equations provide corrections to the expressions for the stress-energy of the wall and to the Israel thin wall equations. The modified thin wall equations are then used to treat the motion of spherical and planar domain walls.

Garfinkle, David↗

NASA NTRS1990

Mode-medium instability and its correction with a Gaussian reflectivity mirror

A high power CO2 laser beam is known to deteriorate after a few microseconds due to a mode-medium instability (MMI) which results from an intensity dependent heating rate related to the vibrational-to-translational decay of the upper and lower CO2 lasing levels. An iterative numerical technique is developed to model the time evolution of the beam as it is affected by the MMI. The technique is used to study the MMI in an unstable CO2 resonator with a hard-edge output mirror for different parameters like the Fresnel number and the gas density. The results show that the mode of the hard edge unstable resonator deteriorates because of the diffraction ripples in the mode. A Gaussian-reflectivity mirror was used to correct the MMI. This mirror produces a smoother intensity profile which significantly reduces the effects of the MMI. Quantitative results on peak density variation and beam quality are presented.

Webster, K. L.↗

NASA NTRS1990

Tutorial on Reed-Solomon error correction coding

This tutorial attempts to provide a frank, step-by-step approach to Reed-Solomon (RS) error correction coding. RS encoding and RS decoding both with and without erasing code symbols are emphasized. There is no need to present rigorous proofs and extreme mathematical detail. Rather, the simple concepts of groups and fields, specifically Galois fields, are presented with a minimum of complexity. Before RS codes are presented, other block codes are presented as a technical introduction into coding. A primitive (15, 9) RS coding example is then completely developed from start to finish, demonstrating the encoding and decoding calculations and a derivation of the famous error-locator polynomial. The objective is to present practical information about Reed-Solomon coding in a manner such that it can be easily understood.

Geisel, William A.↗

NASA NTRS1990

Application of panel methods to wind-tunnel wall interference corrections

Wind-tunnel wall interference effects were estimated using numerical solutions capable of computing the flow field over complex three-dimensional bodies. This approach was then tested by applying it to two typical wind tunnel experiments involving a high-lift wing and a fighter airplane model. In both cases, the static pressure signature along the test section walls was measured and computed for additional validation. The wind-tunnel wall correction method described here, which inherently includes effects of lift and blockage, provides more details than previous semiempirical methods.

Browne, Lindsey↗

NASA NTRS1990

Further corrections to the theory of cosmological recombination

Krolik (1989) pointed out that frequency redistribution due to scattering is more important than cosmological expansion in determining the Ly-alpha frequency profile during cosmological recombination, and that its effects substantially modify the rate of recombination. Although the first statement is true, the second statement is not: a basic symmetry of photon scattering leads to identical cancellations which almost completely erase the effects of both coherent and incoherent scattering. Only a small correction due to atomic recoil alters the line profile from the prediction of pure cosmological expansion, so that the pace of cosmological recombination can be well approximated by ignoring Ly-alpha scattering.

Krolik, Julian H.↗

NASA NTRS1989

A forward error correction technique using a high-speed, high-rate single chip codec

The authors describe an error-correction coding approach that allows operation in either burst or continuous modes at data rates of multiple hundreds of megabits per second. Bandspreading is low since the code rate is 7/8 or greater, which is consistent with high-rate link operation. The encoder, along with a hard-decision decoder, fits on a single application-specific integrated circuit (ASIC) chip. Soft-decision decoding is possible utilizing applique hardware in conjunction with the hard-decision decoder. Expected coding gain is a function of the application and is approximately 2.5 dB for hard-decision decoding at 10-5 bit-error rate with phase-shift-keying modulation and additive Gaussian white noise interference. The principal use envisioned for this technique is to achieve a modest amount of coding gain on high-data-rate, bandwidth-constrained channels. Data rates of up to 300 Mb/s can be accommodated by the codec chip. The major objective is burst-mode communications, where code words are composed of 32 n data bits followed by 32 overhead bits.

Boyd, R. W.↗

NASA NTRS1990

Additions and corrections to the absorption coefficients of CO2 ice - Applications to the Martian south polar cap

Reflectance spectra of carbon dioxide frosts were calculated using the optical constants provided by Warren (1986) for the wavelength region 2-6 microns. In comparing these calculated spectra to spectra of frosts observed in the laboratory and on the surface of Mars, problems in the optical constants presented by Warren (1986) became apparent. Absorption coefficients for CO2 ice have been derived using laboratory reflectance measurements and the Hapke (1981) model for calculating diffuse reflectance. This provides approximate values in regions where no data were previously available and indicates where corrections to the compilation by Warren (1986) are required. Using these coefficients to calculate the reflectance of CO2 ice at varying grain sizes indicates that a typical Mariner polar cap spectrum is dominated by absorptions due to CO2 frost or ice at grain sizes that are quite large, probably of the order of millimeters to centimeters. There are indications of contamination of water frost or dust, but confirmation will require more precise absorption coefficients for solid CO2 than can be obtained from the method used here.

Calvin, Wendy M.↗

NASA NTRS1990

Pulse spreading and range correction analysis for satellite laser ranging

The pulse spreading resulting from light detection and ranging measurements of the range to earth-orbiting satellites is described. An analysis quantifying this pulse spreading and the calculation of corrections to be applied to the lidar range determination of satellites is detailed.

Schwartz, Jon A.↗

NASA NTRS1991

Flange Correction For Metal-To-Metal Contacts

Improved mathematical model provides correction for flange effect in estimating resistance of square contact between two metal layers from standard four-terminal measurements. Extended version of one developed previously for contact between metal layer and semiconductor layer, wherein flange effect important in semiconductor layer only. Here flange effect in both metal layers significant. Interfacial resistances extracted more accurately.

Lieneweg, Udo↗

NASA NTRS1991

Matrix Encoding For Correction Of Errors

Method of matrix encoding and associated decoding provides for correction of errors in digital data recorded on magnetic tape. Intended specifically for use with commercial control circuit board and associated software making it possible to use video cassette recorder as backup for hard-disk memory of personal computer.

Dotson, Ronald S.↗

NASA NTRS1990

The correction of infrasound signals for upper atmospheric winds

Infrasound waves propagate in the atmosphere by a well known mechanism produced by refraction of the waves, return to earth, and reflection at the surface into the atmosphere for subsequent bounces. A figure illustrates this phenomenon with results from a ray trace model. In this instance three rays are returned to earth from a region centered at about 50 kilometers in altitude and two from a region near 110 kilometers in altitude. The control of the wave refraction is largely dominated by the temperature-height profile and inversions; however, a major influence is also produced by the atmospheric wind profile. Another figure illustrates the considerable ray differences for rays moving in the wind direction (to the right) and in the counter direction (to the left). It obviously can be expected that infrasonic signal amplitudes will be greatly influenced by the winds in the atmosphere. The seasonal variation of the high altitude atmospheric winds is well documented. A third figure illustrates this with average statistics on the observed zonal wind in the region of 50 plus or minus 5 kilometers in altitude. The results are based upon a survey by Webb; Webb terms this parameterization the Stratospheric Circulation Index (SCI). The very strong seasonal variation has the ability to exert a major seasonal influence on infrasonic signals. The purpose here is to obtain a method for the correction of this effect.

Mutschlecner, J. Paul↗