Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

A TURBULENCE-DRIVEN MODEL FOR HEATING AND ACCELERATION OF THE FAST WIND IN CORONAL HOLES

A model is presented for generation of fast solar wind in coronal holes, relying on heating that is dominated by turbulent dissipation of MHD fluctuations transported upward in the solar atmosphere. Scale-separated transport equations include large-scale fields, transverse Alfvenic fluctuations, and a small compressive dissipation due to parallel shears near the transition region. The model accounts for proton temperature, density, wind speed, and fluctuation amplitude as observed in remote sensing and in situ satellite data.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-T-149: Brachytherapy Patient Specific Quality Assurance for a HDR Vaginal Cylinder Case

Purpose: Commonly Ir-192 HDR treatment planning system commissioning is only based on a single absolute measurement of source activity supplemented by tabulated parameters for multiple factors without independent verification that the planned distribution corresponds to the actual delivered dose. The purpose on this work is to present a methodology using Gafchromic film with a statistically valid calibration curve that can be used to validate clinical HDR vaginal cylinder cases by comparing the calculated plan dose distribution in a plane with the corresponding measured planar dose. Methods: A vaginal cylinder plan was created with Oncentra treatment planning system. The 3D dose matrix was exported to a Varian Eclipse work station for convenient extraction of a 2D coronal dose plane corresponding to the film position. The plan was delivered with a sheet of Gafchromic EBT3 film positioned 1mm from the catheter using an Ir-192 Nucletron HDR source. The film was then digitized with an Epson 10000 XL color scanner. Film analysis is performed with MatLab imaging toolbox. A density to dose calibration curve was created using TG43 formalism for a single dwell position exposure at over 100 points for statistical accuracy. The plan and measured film dose planes were registered using a known dwell position relative to four film marks. The plan delivered 500 cGy to points 2 cm from the sources. Results: The distance to agreement of the 500 cGy isodose between the plan and film measurement laterally was 0.5 mm but can be as much as 1.5 mm superior and inferior. The difference between the computed plan dose and film measurement was calculated per pixel. The greatest errors up to 50 cGy are near the apex. Conclusion: The methodology presented will be useful to implement more comprehensive quality assurance to verify patient-specific dose distributions.

60 APPLIED LIFE SCIENCES↗

Decimetric gyrosynchrotron emission during a solar flare

The implications of high time-resolution observations of a decimetric, microwave, and hard X-ray burst during a solar flare in which the 900-998 MHz, 8.4 GHz, and 10.4 GHz peak fluxes fit the optically thick spectrum of a homogeneous, thermal gyrosynchrotron source are reported and discussed. The hard X-ray spectrum from 30 to 463 keV is well represented by a thermal bremsstrahlung function, and a temperature derived from this spectrum is used to find the source area of about 10 to the 18th sq cm. An electron density of less than about 7 x 10 to the 9th/cu cm and a magnetic field of roughly 120 gauss are deduced from elementary plasma physics considerations and the lack of Razin-Tsytovich absorption of the 900-998 MHz flux. These conditions place the gyrosynchrotron source at high altitude in a coronal loop, in agreement with VLA observations of other flares.

Batchelor, D. A.↗

Magnetic structure in cool stars. XVI - Emissions from the outer atmosphere of M-type dwarfs

Consideration is given to emission from the outer atmospheres of M-type dwarfs in several spectral lines originating from the chromosphere, the transition-region, and the soft X-ray emission from the corona. It is shown that M-type dwarfs systematically deviate from relations between flux densities in soft X-rays and chromospheric and transition-region emission lines. The quantitative relation between the equivalent width of H-alpha and the Ca II, H, and K emission index is determined. It is suggested that the emission in the Balmer spectrum may result from back heating by coronal soft X-rays.

Rutten, R. G. M.↗

ENTHALPY-BASED THERMAL EVOLUTION OF LOOPS. II. IMPROVEMENTS TO THE MODEL

This paper develops the zero-dimensional (0D) hydrodynamic coronal loop model 'Enthalpy-based Thermal Evolution of Loops' (EBTEL) proposed by Klimchuk et al., which studies the plasma response to evolving coronal heating, especially impulsive heating events. The basis of EBTEL is the modeling of mass exchange between the corona and transition region (TR) and chromosphere in response to heating variations, with the key parameter being the ratio of the TR to coronal radiation. We develop new models for this parameter that now include gravitational stratification and a physically motivated approach to radiative cooling. A number of examples are presented, including nanoflares in short and long loops, and a small flare. The new features in EBTEL are important for accurate tracking of, in particular, the density. The 0D results are compared to a 1D hydro code (Hydrad) with generally good agreement. EBTEL is suitable for general use as a tool for (1) quick-look results of loop evolution in response to a given heating function, (2) extensive parameter surveys, and (3) situations where the modeling of hundreds or thousands of elemental loops is needed. A single run takes a few seconds on a contemporary laptop.

79 ASTRONOMY AND ASTROPHYSICS↗

USING COORDINATED OBSERVATIONS IN POLARIZED WHITE LIGHT AND FARADAY ROTATION TO PROBE THE SPATIAL POSITION AND MAGNETIC FIELD OF AN INTERPLANETARY SHEATH

Coronal mass ejections (CMEs) can be continuously tracked through a large portion of the inner heliosphere by direct imaging in visible and radio wavebands. White light (WL) signatures of solar wind transients, such as CMEs, result from Thomson scattering of sunlight by free electrons and therefore depend on both viewing geometry and electron density. The Faraday rotation (FR) of radio waves from extragalactic pulsars and quasars, which arises due to the presence of such solar wind features, depends on the line-of-sight magnetic field component B{sub ∥} and the electron density. To understand coordinated WL and FR observations of CMEs, we perform forward magnetohydrodynamic modeling of an Earth-directed shock and synthesize the signatures that would be remotely sensed at a number of widely distributed vantage points in the inner heliosphere. Removal of the background solar wind contribution reveals the shock-associated enhancements in WL and FR. While the efficiency of Thomson scattering depends on scattering angle, WL radiance I decreases with heliocentric distance r roughly according to the expression I∝r {sup –3}. The sheath region downstream of the Earth-directed shock is well viewed from the L4 and L5 Lagrangian points, demonstrating the benefits of these points in terms of space weather forecasting. The spatial position of the main scattering site r{sub sheath} and the mass of plasma at that position M{sub sheath} can be inferred from the polarization of the shock-associated enhancement in WL radiance. From the FR measurements, the local B{sub ∥sheath} at r{sub sheath} can then be estimated. Simultaneous observations in polarized WL and FR can not only be used to detect CMEs, but also to diagnose their plasma and magnetic field properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical modeling of fast electron generation in the presence of preformed plasma in laser-matter interaction at relativistic intensities

Fast electron generation in the presence of coronal plasma in front of a solid target (typically referred to as preformed plasma) in laser-matter interaction in the intensity range of 10{sup 19}-10{sup 21} W/cm{sup 2} is studied in a one-dimensional slab approximation with particle-in-cell (PIC) simulations. Three different preformed plasma density scale lengths of 1, 5, and 15 {mu}m are considered. We report an increase in both mean and maximum energy of generated fast electrons with an increase in the preformed plasma scale length (in the range 1-15 {mu}m). The heating of plasma electrons is predominantly due to their stochastic motion in counterpropagating electromagnetic (EM) waves (incident and reflected waves) and the presence of a longitudinal electric field produced self-consistently inside the preformed plasma. The synergetic effects of this longitudinal electric field and EM waves responsible for the efficient preformed plasma electrons heating are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Solar wind carbon, nitrogen and oxygen abundances measured in the earth's magnetosheath with AMPTE/CCE

The solar wind number density ratios of C(6+) + C(5+) and N(7+) + N(6+) + N(5+) relative to O(8+) + O(7+) + O(6+) have been measured for the first time using data from the Charge-Energy-Mass Spectrometer on the AMPTE/CCE spacecraft during four solar active periods from Sept. 19 to Nov. 1, 1984 when CCE traversed the subsolar magnetosheath of the compressed magnetosphere. It is found that the average values of the density ratios of C/O and N/O to be 0.43 + or - 0.03 and 0.15 + or - 0.06, respectively. These ratios, as well as the average He(2+)/O ratio of 43 + or - 5 for these same time periods, are in excellent agreement with Solar Energetic Particles (SEP) abundance ratios as well as SEP-derived coronal abundances of these elements. The solar wind C/O ratio is substantially below the generally accepted photospheric value of 0.60.

Gloeckler, G.↗

X-ray absorbing structures in the Yohkoh images of the corona

Filaments, flare sprays, prominences and 'post-flare' loops are familiar to H alpha observers in their frequent appearances 'in absorption', dark against the chromospheric background or plages. Observations of the X-ray corona are generally interpreted as due to emission via optically thin thermal bremsstrahlung. Several cases of X-ray coronal structures in Yohkoh images, due to high opacity, absorbing matter in coronograph loops, are presented. The presence of the absorbing matter, mixed with emitting matter, complicates inference of physical parameters such as emission measures in X-ray sources. In the case of well defined features, absorption provides an opportunity to infer density. Quantitative estimates of the attenuation due to the absorption in example features are presented.

Batchelor, David A.↗

Demonstration of solar echoes using the Air Force OTH-B radar

From the late 50s to early 70s, attempts were made by at least two different groups to obtain information on physical conditions in the corona by means of active radar soundings. While echoes from the Sun were unquestionably detected. difficulties in their interpretation led to inconclusive results. A major hindrance to these efforts was the limited understanding of the day-to-day structure of the corona then available (e.g., pioneering work in solar wind studies were just underway. and coronal holes had not yet been discovered). With the end of the Cold War, the very large over-the-horizon (OTH) radars operated by the Air Force have been opened up to basic science research through the end of the fiscal year. In light of advances made in coronal physics and in signal processing technology since these early experiments were undertaken. access to the state-of-the art OTH-B radar offers a rare opportunity to gauge anew the scientific potential for radar sounding of the Sun. In principle, it should be possible to obtain useful data on plasma densities and motions over a range of heights in the corona near 0.5R(solar mass) above the solar surface We report here the preliminary findings from a sequence of observations taken over the course of a solar rotation.

Pizzo, V. J.↗

Anomalously low C{sup 6+}/C{sup 5+} ratio in solar wind: ACE/SWICS observation

The Carbon and Oxygen ionization states in the solar wind plasma freeze-in within 2 solar radii (R{sub s}) from the solar surface, and then they do not change as they propagate with the solar wind into the heliosphere. Therefore, the O{sup 7+}/O{sup 6+} and C{sup 6+}/C{sup 5+} charge state ratios measured in situ maintain a record of the thermal properties (electron temperature and density) of the inner corona where the solar wind originates. Since these two ratios freeze-in at very similar height, they are expected to be correlated. However, an investigation of the correlation between these two ratios as measured by ACE/SWICS instrument from 1998 to 201l shows that there is a subset of “Outliers” departing from the expected correlation. We find about 49.4% of these Outliers is related to the Interplanetary Coronal Mass Ejections (ICMEs), while 49.6% of them is slow speed wind (V{sub p} < 500 km/s) and about 1.0% of them is fast solar wind (V{sub p} > 500 km/s). We compare the outlier-slow-speed wind with the normal slow wind (defined as V{sub p} < 500 km/s and O{sup 7+}/O{sup 6+} > 0.2) and find that the reason that causes the Outliers to depart from the correlation is their extremely depleted C{sup 6+}/C{sup 5+} ratio which is decreased by 80% compared to the normal slow wind. We discuss the implication of the Outlier solar wind for the solar wind acceleration mechanism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A DETERMINATION OF THE NORTH–SOUTH HELIOSPHERIC MAGNETIC FIELD COMPONENT FROM INNER CORONA CLOSED-LOOP PROPAGATION

A component of the magnetic field measured in situ near the Earth in the solar wind is present from north–south fields from the low solar corona. Using the Current-sheet Source Surface model, these fields can be extrapolated upward from near the solar surface to 1 AU. Global velocities inferred from a combination of interplanetary scintillation observations matched to in situ velocities and densities provide the extrapolation to 1 AU assuming mass and mass flux conservation. The north–south field component is compared with the same ACE in situ magnetic field component—the Normal (Radial Tangential Normal) Bn coordinate—for three years throughout the solar minimum of the current solar cycle. We find a significant positive correlation throughout this period between this method of determining the Bn field compared with in situ measurements. Given this result from a study during the latest solar minimum, this indicates that a small fraction of the low-coronal Bn component flux regularly escapes from closed field regions. The prospects for Space Weather, where the knowledge of a Bz field at Earth is important for its geomagnetic field effects, is also now enhanced. This is because the Bn field provides the major portion of the Geocentric Solar Magnetospheric Bz field coordinate that couples most closely to the Earth’s geomagnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Time and space resolved measurement of the electron temperature, mass density and ionization state in the ablation plasma between two exploding Al wires

We have determined the properties of plasma around and between two exploding wires using high-resolution x-ray absorption spectroscopy. Plasma densities and temperatures ranging from Greater-Than-Or-Equivalent-To 0.1g/cm{sup 3} and a few eV to less than 0.01 g/cm{sup 3} and 30 eV have been measured in experiments at Cornell University with two 40 {mu}m aluminum (Al) wires spaced 1 mm apart driven by {approx}150 kA peak current pulses with 100 ns rise time. The wire plasma was backlit by the 1.4-1.6 keV continuum radiation produced by a Mo wire X-pinch. The spectrometer employed two spherically bent quartz crystals to record the absorption and backlighter spectra simultaneously. The transition between the dense Al wire core and the coronal plasma is seen as a transition from cold K-edge absorption to Mg-, Na-, and finally Ne-like absorption at the boundary. In the plasma that accumulates between the wires, ionization states up to C-Like Al are observed. The spectrometer geometry and {approx}2{mu}m X-pinch source size provide 0.3 eV spectral resolution and 20 {mu}m spatial resolution enabling us to see 1s{yields} 2p satellite transitions as separate lines as well as O-, F-, and Ne-like 1s{yields} 3p transitions that have not been seen before. A step wedge was used to calibrate the transmission, enabling density to be measured within a factor of two and temperature to be measured within {+-}25%. A genetic algorithm was developed to fit synthetic spectra calculated using the collisional-radiative code SCRAM to the experimental spectra. In order to obtain agreement it was necessary to assume multiple plasma regions with variable thicknesses, thereby allowing the inferred plasma conditions to vary along the absorption path.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DERIVATION OF THE MAGNETIC FIELD IN A CORONAL MASS EJECTION CORE VIA MULTI-FREQUENCY RADIO IMAGING

The magnetic field within the core of a coronal mass ejection (CME) on 2010 August 14 is derived from analysis of multi-wavelength radio imaging data. This CME's core was found to be the source of a moving type IV radio burst, whose emission is here determined to arise from the gyrosynchrotron process. The CME core's true trajectory, electron density, and line-of-sight depth are derived from stereoscopic observations, constraining these parameters in the radio emission models. We find that the CME carries a substantial amount of mildly relativistic electrons (E < 100 keV) in a strong magnetic field (B < 15 G), and that the spectra at lower heights are preferentially suppressed at lower frequencies through absorption from thermal electrons. We discuss the results in light of previous moving type IV burst studies, and outline a plan for the eventual use of radio methods for CME magnetic field diagnostics.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-F-I-14: 3D Breast Digital Phantom for XACT Imaging

Purpose: The X-ray induced acoustic computed tomography (XACT) is a new imaging modality which combines X-ray contrast and high ultrasonic resolution in a single modality. Using XACT in breast imaging, a 3D breast volume can be imaged by only one pulsed X-ray radiation, which could dramatically reduce the imaging dose for patients undergoing breast cancer screening and diagnosis. A 3D digital phantom that contains both X-ray properties and acoustic properties of different tissue types is indeed needed for developing and optimizing the XACT system. The purpose of this study is to offer a realistic breast digital phantom as a valuable tool for improving breast XACT imaging techniques and potentially leading to better diagnostic outcomes. Methods: A series of breast CT images along the coronal plane from a patient who has breast calcifications are used as the source images. A HU value based segmentation algorithm is employed to identify breast tissues in five categories, namely the skin tissue, fat tissue, glandular tissue, chest bone and calcifications. For each pixel, the dose related parameters, such as material components and density, and acoustic related parameters, such as frequency-dependent acoustic attenuation coefficient and bandwidth, are assigned based on tissue types. Meanwhile, other parameters which are used in sound propagation, including the sound speed, thermal expansion coefficient, and heat capacity are also assigned to each tissue. Results: A series of 2D tissue type image is acquired first and the 3D digital breast phantom is obtained by using commercial 3D reconstruction software. When giving specific settings including dose depositions and ultrasound center frequency, the X-ray induced initial pressure rise can be calculated accordingly. Conclusion: The proposed 3D breast digital phantom represents a realistic breast anatomic structure and provides a valuable tool for developing and evaluating the system performance for XACT.

60 APPLIED LIFE SCIENCES↗

Physical conditions in the corona for a bipolar magnetic region

The S-056 X-ray data from Skylab are used to determine quantitative values for the coronal conditions characterizing a new bipolar magnetic region (BMR). In particular, the analysis includes: (1) the time variation of the total soft X-ray flux from the BMR as a function of time; (2) the temporal and spatial variation of the temperature and emission measure; (3) the variation with time of thermal energy density; (4) the (calculated) magnetic-field configuration and magnetic flux density in the corona; and (5) the temporal variation of the magnetic-field energy in the corona. Detailed comparisons are made between the configuration of X-ray features and the magnetic-field topology.

Vorpahl, J. A.↗

Observations of the Ca II K line in Hel0830A dark points on August 3, 1985

Spectroheliograms taken in the light of He I 10830 A at the National Solar Observatory Vacuum Telescope on Kitt Peak were used to identify coronal holes and bright points (BPs). Target points were identified, coordinates calculated, and spectra recorded. For each spectrum, the difference in wavelength between the Ca II K minimum and the FeI reference line was calculated. It was noteworthy that the overall effect is a blueshift. It should be noted that if material of chromospheric density moves outward at this velocity, it could supply the mass flux of the solar wind if this chromospheric flow was concentrated in a few dozen sources, each of a diameter of a few arc seconds.

Holt, Rush D.↗

An Investigation of the Large Scale Evolution and Topology of Coronal Mass Ejections in the Solar Wind

This investigation is concerned with the large-scale evolution and topology of coronal mass ejections (CMEs) in the solar wind. During this reporting period we have focused on several aspects of CME properties, their identification and their evolution in the solar wind. The work included both analysis of Ulysses and ACE observations as well as fluid and magnetohydrodynamic simulations. In addition, we analyzed a series of "density holes" observed in the solar wind, that bear many similarities with CMEs. Finally, this work was communicated to the scientific community at three meetings and has led to three scientific papers that are in various stages of review.

Riley, Peter↗