SEARCH · Engineering Papers

Results for “configuration interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Recent progress in the analysis of iced airfoils and wings

Recent work on the analysis of iced airfoils and wings is described. Ice shapes for multielement airfoils and wings are computed using an extension of the LEWICE code that was developed for single airfoils. The aerodynamic properties of the iced wing are determined with an interactive scheme in which the solutions of the inviscid flow equations are obtained from a panel method and the solutions of the viscous flow equations are obtained from an inverse three-dimensional finite-difference boundary-layer method. A new interaction law is used to couple the inviscid and viscous flow solutions. The newly developed LEWICE multielement code is amplified to a high-lift configuration to calculate the ice shapes on the slat and on the main airfoil and on a four-element airfoil. The application of the LEWICE wing code to the calculation of ice shapes on a MS-317 swept wing shows good agreement with measurements. The interactive boundary-layer method is applied to a tapered iced wing in order to study the effect of icing on the aerodynamic properties of the wing at several angles of attack.

Cebeci, Tuncer↗

NASA NTRS1986

Simulating AOTV heating environment in an arc jet

The application of arc-jet facilities to the simulation of the combined radiative and convective heating environments calculated for AOTV return missions is presented. The AOTV mission requirement and design configuration determine the magnitude of the radiative and convective heating rates. This paper considers methods for obtaining radiation from the high temperature plasma in arc-jet flows. A computer code that predicts arc-heater performance was used to determine the effect of gas mixtures on arc-heater performance, with the intent of increasing the gas temperature and resultant radiative emission. Numerical radiation solutions were compared with direct measurements of the radiative intensity from the gas cap. Convective heating measurements were made as well. The arc-jet was operated at AOTV enthalpy and pressure levels for these measurements to assess the simulation capabilities for AOTV material development/testing. A parametric study is presented that defines the capability of the Interaction Heating Facility arc jet at Ames to simulate both the radiative and the convective heating for current AOTV configurations.

Balboni, J.↗

NASA NTRS2017

Nearfield Summary and Statistical Analysis of the Second AIAA Sonic Boom Prediction Workshop

A summary is provided for the Second AIAA Sonic Boom Workshop held 8-9 January 2017 in conjunction with AIAA SciTech 2017. The workshop used three required models of increasing complexity: an axisymmetric body, a wing body, and a complete configuration with flow-through nacelle. An optional complete configuration with propulsion boundary conditions is also provided. These models are designed with similar nearfield signatures to isolate geometry and shock/expansion interaction effects. Eleven international participant groups submitted nearfield signatures with forces, pitching moment, and iterative convergence norms. Statistics and grid convergence of these nearfield signatures are presented. These submissions are propagated to the ground, and noise levels are computed. This allows the grid convergence and the statistical distribution of a noise level to be computed. While progress is documented since the first workshop, improvement to the analysis methods for a possible subsequent workshop are provided. The complete configuration with flow-through nacelle showed the most dramatic improvement between the two workshops. The current workshop cases are more relevant to vehicles with lower loudness and have the potential for lower annoyance than the first workshop cases. The models for this workshop with quieter ground noise levels than the first workshop exposed weaknesses in analysis, particularly in convective discretization.

Park, Michael A.↗

NASA NTRS2018

Nearfield Summary and Statistical Analysis of the Second AIAA Sonic Boom PredictionWorkshop

A summary is provided for the Second AIAA Sonic Boom Workshop held 8–9 January 2017 in conjunction with AIAA SciTech 2017. The workshop used three required models of increasing complexity: an axisymmetric body, a wing body, and a complete configuration with flow-through nacelle. An optional complete configuration with propulsion boundary conditions is also provided. These models are designed with similar nearfield signatures to isolate geometry and shock/expansion interaction e ects. Eleven international participant groups submitted nearfield signatures with forces, pitching moment, and iterative convergence norms. Statistics and grid convergence of these nearfield signatures are presented. These submissions are propagated to the ground, and noise levels are computed. This allows the grid convergence and the statistical distribution of a noise level to be computed. While progress is documented since the first workshop, improvement to the analysis methods for a possible subsequent workshop are provided. The complete configuration with flow-through nacelle showed the most dramatic improvement between the two workshops. The current workshop cases are more relevant to vehicles with lower loudness and have the potential for lower annoyance than the first workshop cases. The models for this workshop with quieter ground noise levels than the first workshop exposed weaknesses in analysis, particularly in convective discretization.

Park, Michael A.↗

NASA NTRSDate not supplied

Preliminary Steps in Developing Rapid Aero Modeling Technology

The Rapid Aero Modeling (RAM) approach is a method to efficiently and automatically obtain aerodynamic models during testing, significantly saving time and resources. Motivation for this technology results from demand for experimental efficiency and model fidelity that has increased with growing aircraft complexity and aerodynamic nonlinearities. These issues are typical in the responses presented by a class of vehicles categorized as Urban Air Mobility aircraft where many features from both airplane and rotorcraft are present. For UAM configurations, with typically many more factors than conventional aircraft, traditional test methods can lead to increased costs and missed interactions. RAM guides the test to obtain high-fidelity, statistically rigorous aircraft models, and the approach is applicable to computational, ground, or flight-test experiments. It combines concepts from Design of Experiment theory and Aircraft System Identification theory that allow the user the freedom to choose, in advance of the test, a specific level of fidelity typically, in terms of prediction error. RAM only collects data required to meet the user-specified fidelity and fidelity is only limited by the facility and test article capabilities. An initial wind tunnel test to support development of RAM was conducted to assess potential metrics, algorithms, and procedures. This paper presents results from initial tests for the development of RAM technology and highlights some of the unique features of RAM applied toa conventional configuration during a ground-based, static, wind-tunnel test.

Patrick C Murphy↗

NASA NTRS1999

Mars Surface Ionizing Radiation Environment: Need for Validation

Protection against the hazards from exposure to ionizing radiation remains an unresolved issue in the Human Exploration and Development of Space (HEDS) enterprise [1]. The major uncertainty is the lack of data on biological response to galactic cosmic ray (GCR) exposures but even a full understanding of the physical interaction of GCR with shielding and body tissues is not yet available and has a potentially large impact on mission costs. "The general opinion is that the initial flights should be short-stay missions performed as fast as possible (so-called 'Sprint' missions) to minimize crew exposure to the zero-g and space radiation environment, to ease requirements on system reliability, and to enhance the probability of mission success." The short-stay missions tend to have long transit times and may not be the best option due to the relatively long exposure to zero-g and ionizing radiation. On the other hand the short-transit missions tend to have long stays on the surface requiring an adequate knowledge of the surface radiation environment to estimate risks and to design shield configurations. Our knowledge of the surface environment is theoretically based and suffers from an incomplete understanding of the physical interactions of GCR with the Martian atmosphere, Martian surface, and intervening shield materials. An important component of Mars surface robotic exploration is the opportunity to test our understanding of the Mars surface environment. The Mars surface environment is generated by the interaction of Galactic Cosmic Rays (GCR) and Solar Particle Events (SPEs) with the Mars atmosphere and Mars surface materials. In these interactions, multiple charged ions are reduced in size and secondary particles are generated, including neutrons. Upon impact with the Martian surface, the character of the interactions changes as a result of the differing nuclear constituents of the surface materials. Among the surface environment are many neutrons diffusing from the Martian surface and especially prominent are energetic neutrons with energies up to a few hundred MeV. Testing of these computational results is first supported by ongoing experiments at the Brookhaven National Laboratory but equally important is the validation to the extent possible by measurements on the Martian surface. Such measurements are limited by power and weight requirements of the specific mission and simplified instrumentation by necessity lacks the full discernment of particle type and spectra as is possible with laboratory experimental equipment. Yet, the surface measurements are precise and a necessary requisite to validate our understanding of the surface environment. At the very minimum the surface measurements need to provide some spectral information on the neutron environment. Of absolute necessity is the precise knowledge of the detector response functions for absolute comparisons between the computational model of the surface environment and the detector measurements on the surface.

Wilson, J. W.↗

NASA NTRS1981

A large-scale investigation of engine influence on inlet performance at angle-of-attack

A low-speed wind tunnel test was conducted in the NASA/Ames 40-x-80-foot wind tunnel to investigate the effect of engine/inlet flowfield interaction on inlet performance near flow separation. The effect of engine/inlet flowfield interaction was determined by comparing the performance of a large-scale subsonic inlet (CR = 1.26) close-coupled and remote-coupled to a TF-34 turbofan engine. The remote coupled inlet configuration removes the influence of the engine on the inlet flowfield and further, typifies conventional small-scale inlet test techniques which generally provide no simulation of turbomachinery effects. Test results indicated that engine interaction allows the inlet to operate with lower distortion levels at and beyond the separation angle-of-attack attained without engine interaction.

Hodder, B. K.↗

NASA NTRS1984

Ground correlation investigation of thruster spacecraft interactions to be measured on the IAPS flight test

Preliminary ground correlation testing has been conducted with an 8 cm mercury ion thruster and diagnostic instrumentation replicating to a large extent the IAPS flight test hardware, configuration, and electrical grounding/isolation. Thruster efflux deposition retained at 25 C was measured and characterized. Thruster ion efflux was characterized with retarding potential analyzers. Thruster-generated plasma currents, the spacecraft common (SCC) potential, and ambient plasma properties were evaluated with a spacecraft potential probe (SPP). All the measured thruster/spacecraft interactions or their IAPS measurements depend critically on the SCC potential, which can be controlled by a neutralizer ground switch and by the SPP operation.

Power, J. L.↗

NASA NTRS1984

Ground correlation investigation of thruster/spacecraft interactions to be measured on the IAPS flight test

Power, J. L.↗

NASA NTRSDate not supplied

Comparison of the CHARM Predictions of the Multirotor Test Bed with Wind Tunnel Experimental Results

Urban air mobility as a fast transportation solution has captured the attention of private companies and government aviation departments in the 21st century. New designs of aerial vehicles are being developed to meet industry needs but often neglect the aerodynamic characteristics and the effects of interacting rotors. This work focuses on predicting rotor behavior and understanding the importance of the rotor wake interaction for future urban air mobility (UAM) designs. The Multirotor Test Bed (MTB) project was initiated at NASA Ames Research center to support the NASA Revolutionary Vertical Lift Technology Project to study rotorcraft performance specifically for multirotor aircraft. The MTB is a modular multirotor test stand that makes testing feasible for up to six rotors at different angles and rotor arrangements, including Tall and Short configurations at different horizontal and vertical rotor separation distances. The MTB was tested in the U.S Army’s 7-by 10-Foot Wind Tunnel at NASA Ames Research Center in late 2019. This work focuses on exploring the impact of aerodynamic interactions between the MTB rotors using the Comprehensive Hierarchical Aeromechanics Rotorcraft Model (CHARM) software. The CHARM software is capable of modeling Vertical Take Off and Landing aircraft aerodynamics in maneuvering and steady flight conditions. CHARM allows the user to define flow and body characteristics, including the rotor geometry, aerodynamic conditions, wind tunnel speed, and airfoil tables as inputs. As the first step, a single MTB rotor was simulated in hover, and the results were compared with wind tunnel test data to confirm the CHARM parameters. Once the accurate performance was verified, the MTB rotors were simulated in forward flight, and each rotor was trimmed to the measured thrust. The simulation variables include one, two, four, and six rotors at the Short and Tall configurations, with MTB pitch angles of 0, -5, and -10 degrees. The MTB was simulated with and without wind tunnel walls. These results demonstrate the rotor wake interaction and its impact on rotor performance. This information also helps determine which configurations should be explored for future wind tunnel tests.

CHARM Predictions↗

NASA NTRS1993

Flow visualization of mast-mounted-sight/main rotor aerodynamic interactions

Flow visualization tests were conducted on a 27 percent-scale AH-64 attack helicopter model fitted with various mast-mounted-sight configurations in an attempt to identify the cause of adverse vibration encountered during full-scale flight tests of an Apache/Longbow configuration. The tests were conducted at the NASA Langley Research Center in the 14- by 22-Foot Subsonic Tunnel. A symmetric and an asymmetric mast-mounted-sight oriented at several skew angles were tested at forward and rearward flight speeds of 30 and 45 knots. A laser light sheet seeded with vaporized propylene glycol was used to visualize the wake of the sight in planes parallel and perpendicular to the freestream flow. Analysis of the flow visualization data identified the frequency of the wake shed from the sight, the angle-of-attack at the sight, and the location where the sight wake crossed the rotor plane. Differences in wake structure were observed between the various sight configurations and slew angles. Postulations into the cause of the adverse vibration found in flight test are given along with considerations for future tests.

Ghee, Terence A.↗

NASA NTRS2013

Long Penetration Mode Counterflowing Jets for Supersonic Slender Configurations - A Numerical Study

A novel approach of using counterflowing jets positioned strategically on the aircraft and exploiting its long penetration mode (LPM) of interaction towards sonic-boom mitigation forms the motivation for this study. Given that most previous studies on the counterflowing LPM jet have all been on blunt bodies and at high supersonic or hypersonic flow conditions, exploring the feasibility to obtain a LPM jet issuing from a slender body against low supersonic freestream conditions is the main focus of this study. Computational fluid dynamics computations of axisymmetric models (cone-cylinder and quartic geometry), of relevance to NASA's High Speed project, are carried out using the space-time conservation element solution element viscous flow solver with unstructured meshes. A systematic parametric study is conducted to determine the optimum combination of counterflowing jet size, mass flow rate, and nozzle geometry for obtaining LPM jets. Details from these computations will be used to assess the potential of the LPM counterflowing supersonic jet as a means of active flow control for enabling supersonic flight over land and to establish the knowledge base for possible future implementation of such technologies.

Venkatachari, Balaji Shankar↗

NASA NTRS1979

Analysis of some aerodynamic characteristics due to wing-jet interaction

The results of two separate theoretical investigations are presented. A program was used which is capable of predicting the aerodynamic characteristics of both upper-surface blowing (USB) and over-wing blowing (OWB) configurations. A theoretical analysis of the effects of over-wing blowing jets on the induced drag of a 50 deg sweep back wing was developed. Experiments showed net drag reductions associated with the well known lift enhancement due to over-wing blowing. The mechanisms through which this drag reduction is brought about are presented. Both jet entrainment and the so called wing-jet interaction play important roles in this process. The effects of a rectangular upper-surface blowing jet were examined for a wide variety of planforms. The isolated effects of wing taper, sweep, and aspect ratio variations on the incremental lift due to blowing are presented. The effects of wing taper ratio and sweep angle were found to be especially important parameters when considering the relative levels of incremental lift produced by an upper-surface blowing configuration.

Fillman, G. L.↗

NASA NTRS1979

Chemical releases in the ionosphere

The study of the interaction between the atmosphere, ionosphere and magnetosphere is identified as a major task worthy of pursuit. The present review demonstrates the major contributions to this complex problem already made by active experiments involving the injection of chemicals and energetic electron beams into the atmosphere, ionosphere and magnetosphere. Through the use of chemical releases, it has been possible to investigate a number of quantities including high-altitude winds and electric fields, the detailed configurations of the geomagnetic field within the ionosphere and the magnetosphere, as well as the propagation of energetic particle beams and their interaction with natural neutral and ionized constituents of the high atmosphere. So far, virtually all of this effort has been accomplished using rockets. In the future, it is obvious that satellite platforms will play a greater role, both in making injections and in observing their effects.

Davis, T. N.↗

NASA NTRS1972

Flap noise

Externally-blown-flap noise research can be summarized by the following remarks: With lower-surface blowing, the sources of the flap noise are begining to be understood and the noise scaling laws have been established. Further, progress has been made on suppressing the flap interaction noise at the large flap deflections used during landing. Recent small-scale noise tests of configurations using external upper-surface blowing indicate that engine-over-the-wing configurations may be promising.

Dorsch, R. G.↗

NASA NTRS1973

An integrated power/attitude control system /IPACS/ for space vehicle application

An integrated power and attitude control system (IPACS) concept with potential application to a broad class of space missions is discussed. The concept involves the storage and supply on demand of electrical energy in rotating flywheels while simultaneously providing control torques by controlled precession of the flywheels. The system is thus an alternative to the storage batteries used on present spacecraft while providing similar capability for attitude control as that represented by a control moment gyroscope (CMG) system. Potential IPACS configurations discussed include single- and double-rotor double-gimbal IPACS units. Typical sets of control laws which would manage the momentum and energy exchange between the IPACS and a typical space vehicle are discussed. Discussion of a simulation of a typical potential IPACS configuration and candidate mission concerned with pointing capability, power supply and demand flow, and discussion of the interactions between stabilization and control requirements and power flow requirements are presented.

Anderson, W. W.↗

NASA NTRS1975

Results of an external tank separation test in AEDC/VKF tunnel B on 0.010-scale replica of space shuttle vehicle model 52-OT(IA17A), Volume 1

Tests were conducted on scale models of the space shuttle orbiter and external tank (ET) to determine the aerodynamic interactions during a return to launch site abort separation. The orbiter model was built to vehicle 3 configuration lines (139B) and the ET model approximated the vehicle 5 configurations with protuberances and attach hardware. For these investigations the orbiter was mounted on the primary support system and the external tank was mounted on the captive trajectory system. Six-component data were obtained for each vehicle at various orbiter angles of attack and sideslip for a range of relative angular and linear displacements of the ET from the orbiter.

Spangler, R. H.↗

NASA NTRS1977

Design procedures for flutter-free surface panels

An approach for the design of lightweight external surface panel configurations to preclude panel flutter was developed. Design procedures were developed for flat orthotropic panels under the interacting influence of parameters such as support flexibility, inplane loads, pressure differential, and flow angularity. The basic relationships required to define these design procedures were based on theoretical panel flutter analyses. Where possible, the design procedures were verified through comparison with available experimental panel flutter data.

Laurenson, R. M.↗