Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Dual-Ion Intercalation and High Volumetric Capacitance in a Two-Dimensional Non-Porous Coordination Polymer

Intercalation is a promising ion-sorption mechanism for enhancing the energy density of electrochemical capacitors (ECs) because it offers enhanced access to the electrochemical surface area. It requires a rapid transport of ions in and out of a host material, and it must occur without phase transformations. Materials that fulfil these requirements are rare; those that do intercalate almost exclusively cations. Herein, we show that Ni3(benzenehexathiol) (Ni 3 BHT), a non-porous two-dimensional (2D) layered coordination polymer (CP), intercalates both cations and anions with a variety of charges. Whereas cation intercalation is pseudocapacitive, anions intercalate in a purely capacitive fashion. The excellent EC performance of Ni3BHT provides a general basis for investigating similar dual-ion intercalation mechanisms in the large family of non-porous 2D CPs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Direct Insertion Polymerization of Ionic Monomers: Rapid Production of Anion Exchange Membranes

The limited number of methods to directly polymerize ionic monomers currently hinders rapid diversification and production of ionic polymeric materials, namely anion exchange membranes (AEMs) which are essential components in emerging alkaline fuel cell and electrolyzer technologies. Herein, we report a direct coordination-insertion polymerization of cationic monomers, providing the first direct synthesis of aliphatic polymers with high ion incorporations and allowing facile access to a broad range of materials. We demonstrate the utility of this method by rapidly generating a library of solution processable ionic polymers for use as AEMs. We investigate these materials to study the influence of cation identity on hydroxide conductivity and stability. Furthermore, we found that AEMs with piperidinium cations exhibited the highest performance, with high alkaline stability, hydroxide conductivity of 87 mS cm –1 at 80 °C, and a peak power density of 730 mW cm –2 when integrated into a fuel cell device.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Lattice Relaxations in Bixbyite‐Structured Rare‐Earth Sesquioxides

This report examines atomic relaxations in rare‐earth sesquioxides with the cubic bixbyite crystal structure. In particular, the experimentally determined unit cell atom positions in bixbyite compounds are compared to “ideal” bixbyite atom positions, where the concept of ideality is based on similarities between the bixbyite and fluorite crystal structures. Analyses indicate that all rare‐earth sesquioxide compounds deviate from ideality in similar ways and that there is a trend wherein the magnitudes of these atomic deviations decrease with increasing cationic size. The deviations from an ideal, fluorite‐like structure produce highly distorted coordination polyhedra and variations in metal‐oxygen bond lengths. A modified bond valence sum analysis revealed that the first nearest neighbor cation‐anion bond length variations lead to large (20%) variations in cation‐anion bond strength. This report also provides a qualitative analysis regarding the accuracy of atomic relaxed deviation parameters, based on x‐ray diffraction measurements. The analysis indicates that uncertainties in the accuracy of measured oxygen relaxed deviation parameters in bixbyite sesquioxides are likely much greater than the published uncertainties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

CO 2 Chemisorption Behavior of Coordination-Derived Phenolate Sorbents

CO 2 chemisorption via C-O bond formation is an efficient methodology in carbon capture especially using phenolate-based ionic liquids (ILs) as the sorbents to afford carbonate products. However, most of the current IL systems involve alkylphosphonium cations, leading to side reactions via the ylide intermediate pathway. It is important to figure out the CO 2 chemisorption behavior of phenolate-derived sorbents using inactive and easily accessible cation counterparts without active protons. Herein, phenolate-based systems were constructed via coordination between alkali metal cations with crown ethers to avoid the participation of active protons in CO 2 chemisorption. Reaction pathway study revealed that CO 2 uptake could be achieved by O-C bond formation to afford carbonate. CO 2 uptake capacity and reaction enthalpy were significantly influenced by the coordination effect, alkali metal types, and alkyl groups on the benzene ring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ionically Active MXene Nanopore Actuators

Reversible electrochemical intercalation of cations into the interlayer space of 2D materials induces tunable physical and chemical properties in them. In MXenes, a large class of recently developed 2D carbides and nitrides, low intercalation energy, high storage capacitance, and reversible intercalation of various cations have led to their improved performance in sensing and energy storage applications. In this work, a coupled nanopore-actuator system where an ultrathin free-standing MXene film serves as a nanopore support membrane and ionically active actuator is reported. In this system, the contactless MXene membrane in the electric field affects the cation movement in the field through their (de)intercalation between individual MXene flakes. This results in reversible swelling and contraction of the membrane monitored by ionic conductance through the nanopore. This unique nanopore coupled to a mechanical actuation system could provide new insights into designing single-molecule biosensing platforms at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tailored (La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 Dy 0.2 ) 2 Ce 2 O 7 as a Highly Active and Stable Nanocatalyst for the Oxygen Evolution Reaction

Abstract Designing highly active and robust catalysts for the oxygen evolution reaction is key to improving the overall efficiency of the water splitting reaction. It has been previously demonstrated that evaporation induced self‐assembly (EISA) can be used to synthesize highly porous and high surface area cerate‐based fluorite nanocatalysts, and that substitution of Ce with 50% rare earth (RE) cations significantly improves electrocatalyst activity. Herein, the defect structure of the best performing nanocatalyst in the series are further explored, Nd 2 Ce 2 O 7 , with a combination of neutron diffraction and neutron pair distribution function analysis. It is found that Nd 3 + cation substitution for Ce in the CeO 2 fluorite lattice introduces higher levels of oxygen Frenkel defects and induces a partially reduced RE 1.5 Ce 1.5 O 5 +x phase with oxygen vacancy ordering. Significantly, it is demonstrated that the concentration of oxygen Frenkel defects and improved electrocatalytic activity can be further enhanced by increasing the compositional complexity (number of RE cations involved) in the substitution. The resulting novel compositionally‐complex fluorite– (La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 Dy 0.2 ) 2 Ce 2 O 7 is shown to display a low OER overpotential of 210 mV at a current density of 10 mAcm −2 in 1M KOH, and excellent cycling stability. It is suggested that increasing the compositional complexity of fluorite nanocatalysts expands the ability to tailor catalyst design.

Chemistry↗
DOE OSTI2025

Speciation and diffusive dynamics in hydrated grain boundaries of complex oxide Gd2Ti2O7

Abstract Grain boundaries in polycrystalline materials significantly affect their properties, such as ionic transport, corrosion, and chemical durability. The pyrochlore compound (Gd 2 Ti 2 O 7 ) is employed as a model for complex oxides and is known for its diverse applications, including nuclear waste immobilization. Density functional theory-based first-principles molecular dynamics simulations were performed at different temperatures on the hydrated grain boundary system. The results show extensive transformations within the grain boundaries among hydrous water species (OH − , H 2 O, and H 3 O + ). The temperature dependence of self-diffusion coefficients follows Arrhenius behavior, with an activation energy of 35.9 kJ/mol for hydrogen and 46.3 kJ/mol for oxygen. The lifetime of OH − is about three to four times longer than that of H 2 O at temperatures from 800 to 2100 K, suggesting the greater stability of OH − over H 2 O, a unique characteristic of the grain boundaries. The estimated lifetime of the hydrous species decreases as the temperature increases, with an activation energy of 9.9 kJ/mol for OH − and 13.4 kJ/mol for H 2 O. While Gd 3 + is more mobile than Ti 4+ , both the Gd 3 + and Ti 4+ cations are orders of magnitude less mobile than the water species. The results suggest that water species are much more mobile within grain boundaries than in the bulk crystal and have the potential to penetrate deep into polycrystalline materials through grain boundaries, leading to grain boundary degradation and dissolution. The different mobilities of cations in complex oxides can lead to leaching of certain cations and incongruent dissolution during the chemical weathering of Earth and industrial materials.

B. Ghosh, Dipta↗
DOE OSTI2020

Syntheses and Crystal Structures of Rare-Earth Oxyapatites Ca 2 RE 8 (SiO 4 ) 6 O 2 (RE = Pr, Tb, Ho, Tm)

Four different rare-earth oxyapatites of Ca 2 RE 8 (SiO 4 ) 6 O 2 (RE = Pr, Tb, Ho, Tm) were synthesized using a solution-based method followed by drying, calcination, and high-temperature sintering in air. X-ray powder diffraction and Raman spectroscopy were performed on the synthesized oxyapatites. Here, the RE oxyapatites crystallize in the hexagonal space group P6 3 /m with similar unit cell parameters, increasing linearly with larger RE cations. The unit cell volumes increase linearly whereas the densities decrease nonlinearly with larger RE cations. Raman spectra showed intense bands of the symmetric bending and stretching modes of SiO 4 at ~ 400 and 860 cm -1 regions, respectively. The bands generally shifted to higher frequencies with smaller RE cations in the structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exploring NaCl-PuCl 3 molten salts with machine learning interatomic potentials and graph theory

Actinide molten salts are the basis of the liquid fuels used in molten salt reactors. Due to the inherent difficulties associated with high temperature and hazardous conditions, experimental investigations of fundamental properties of these materials are usually challenging. In this work, we describe the structure and transport of NaCl-PuCl 3 mixtures using computational techniques. Three compositions were considered (16, 25, and 36 mol% PuCl 3 ) over a temperature range (730 – 1257K) using ab initio molecular dynamics, which provided the necessary data sets for training machine learned interatomic potentials. Further, molecular dynamics simulations based on these potentials were then used to determine structure and transport properties. A substantial change was noted in the structure factor when increasing the PuCl 3 content from 25 to 36 mol%. This change is linked to the aggregation of larger Pu 3+ clusters. In addition, the similarity of the atomic environments of metal cations in molten salt systems to their solid states counterparts was investigated using an unsupervised learning technique. Finally, graph theory was employed to explore the structure and size of actinide networks. Consistent with the structure factor, a dense Pu 3+ intermolecular structure is observed within the 36 mol% PuCl 3 mixture. The structure of cation-cation inter-junctions is also discussed. In all cases, the diffusion of Pu 3+ is significantly lower than that of Na + and Cl - .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dissolution and initial hydration behavior of tricalcium aluminate in low activity sulfate solutions

Influences of alkali or alkaline earth sulfates on the hydration of cubic tricalcium aluminate (C 3 A) were evaluated by in situ dissolution rate measurements, by ex situ near-surface composition measurements with secondary ion mass spectrometry, and by in situ synchrotron X-ray diffraction to monitor precipitation of hydration products. Both slight reductions in dissolution rate and cation-specific interactions with the solid were observed. The near-surface Ca/Al ratio is significantly lower after some dissolution and the electrolyte cations are incorporated within the surface with different affinities (Mg 2+ > K + > Na + ). An interfacial dissolution-reprecipitation mechanism may explain the observations as well as, or better than, a simple cation exchange. The sulfate concentration in solution affects the rates of both C 3 A dissolution and precipitation of hydration products. Aditionally, sulfate ions likely adsorb at the hydrous Al-rich surface layer, thereby reducing the dissolution rate of aluminates and delaying the precipitation of aluminate hydration products.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Potassium iodide cluster based superhalogens and superalkalis: Theoretical calculations and experimental confirmation

We studied a series of potassium-iodide clusters with formulas of (KI)nI- and (KI)nK+ (n = 1-3) by quantum chemical calculations. The calculated vertical detachment energies (VDEs) of (KI)nI- clusters are all higher than those of halogen anions, and thus can be classified as superhalogen anions; while the calculated vertical electron affinities (VEAs) of (KI)nK+ clusters are all lower than those of alkali metal cations, and thus they can be recognized as superalkali cations. Our calculated VEA for (KI)K+, i.e., K2I+, agrees well with the previously measured value by thermal ionization mass spectrometry. We confirmed the theoretical predictions by measuring the negative ion photoelectron (NIPE) spectra of (KI)nI- anions, from which the measured VDEs are found to be in good agreement with the theoretically calculated values. In addition, we also explored the possibility of supersalts formed by these superhalogen anions and superalkali cations, for example, K3I3 can be regarded as a supersalt formed by K2I+ and KI2– subunits.

potassium-iodide clusters, superhalogen, superalka↗
DOE OSTI2022

Lithological controls on soil geochemistry and clay mineralogy across Spodosols in the coastal temperate rainforest of southeast Alaska

The interaction of similar soil forming factors with different parent materials determines soil chemical weathering, influencing soil processes and properties. In the coastal temperate rainforests of southeast Alaska, Spodosols is the dominant soil order in well-drained parent materials regardless of the lithology. Yet, the role of lithology on chemical weathering, base cation depletion, and mineral transformation during pedogenesis remains elusive. Here, we established a lithosequence comprised of soils derived from tonalite, phyllite, slate, and metavolcanic rocks to test the hypothesis that despite the soils in southeast Alaska presenting similar taxonomy and morphology, the influence of lithology in chemical weathering intensity and mineralogy can be detected. We evaluated physicochemical properties, clay mineralogy, Fe-Al oxides, chemical weathering, and elemental mass balance on eleven Spodosols sampled along the lithosequence. We also propose a new weathering index, the Weathering Index for Spodosols (WISP), suitable to evaluate the weathering degree of soils with Al mobility and base-rich parent materials. This index fills a gap in traditional weathering indices that uses Al as an immobile element and/or does not evaluate the leaching of main base cations. We found the pedons across the lithosequence expressed similar physicochemical properties, with predominantly thick profiles, presenting andic properties, relatively thick spodic horizons, and thin E horizons. Podzolization imposed similar mineral transformation trends, mainly dissolution of chlorite, mica alteration to interstratified mica-vermiculite, and formation of smectite in E horizons. Kaolinite was detected in the soils from all lithologies, but only in trace amounts in phyllite soils. Fe oxides depth distribution was similar but with a higher concentration in the slate (44.5 ± 4.2 g/kg), followed by metavolcanic (31.6 ± 4.0 g/kg), phyllite (27.9 ± 3.8 g/kg), and tonalite soils (19.9 ± 5.7 g/kg) and predominantly as organometallic complexes (extracted by Na-pyrophosphate). The stronger weathering of chlorite and mica in the E horizons was reflected in larger losses of Mg and K, while Ca and Na were more depleted in the spodic horizons, suggesting plagioclase weathering. Slate soils were the most depleted in base cations, followed by phyllite, tonalite, and metavolcanic soils. The more depleted status of slate soils was supported by the higher WISP values (WISP = 62), followed by phyllite (WISP = 55), tonalite (WISP = 53), and metavolcanic soils (WISP = 45). Our results demonstrated that lithology controlled elemental depletion intensities, Fe oxide concentrations, and partially the clay fraction mineralogy in addition to podzolization acting as a dominant pedogenic process across all sites. These findings advance our understanding of the role of lithology on soil mineralogy/geochemistry that impacts critical soil functions, such as the soil carbon cycle, elemental fluxes, organo-mineral interactions, and solid-solution reactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Synthesis and spectroscopic characterization of actinyl(VI) tetrahalide coordination compounds containing 2, 2'-bipyridine

A series of three new actinide tetrahalide coordination compounds containing 2,2'-bipyridinium (H 2 bpy) have been synthesized by room temperature evaporation and characterized via single crystal X-ray diffraction, Raman spectroscopy, and infrared spectroscopy. The solid-state compounds (Np1, U1, and U2) contain the AnO 2 2+ cation coordinated to four halide (chloride or bromide) atoms to form the anionic tetrahalide molecular unit [AnO 2 X 4 ] 2– (X = Cl, Br) and are charge balanced by the 2,2'-bipyridinium cations that engage in electrostatic interactions with the actinyl complex. Np1 (N 2 C 10 H 10 )[NpO 2 Cl 4 ] contains 2,2'-bipyridine in the cis conformation where both the nitrogen atoms are directed towards the [NpO 2 Cl 4 ] 2– monomer. Within U1 (N 2 C 10 H 9 )[UO 2 Cl 4 ], the 2,2'-bipyridine is in a trans conformation, and found in the same orientation in the isomorphous structure U2 (N 2 C 10 H 9 )[UO 2 Br 4 ]. The compounds were further characterized by vibrational spectroscopy with specific interest in the actinyl cation. Raman spectroscopy provided information on the actinyl symmetric stretch (ν 1 ) whereas IR spectroscopy is used to determine the location of the asymmetric stretch (ν 3 ). Here, spectral similarities are observed between the two isomorphous structures, but slight variations across the series of structures are found to be associated with bipyridine bands in the various conformations. Additional analysis of these vibrational features in U1 and U2 provided information on the actinyl force constants, allowing insight into the relative uranyl bond strength that was compared to similar tetrahalide compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Influence of chain length in protic ionic liquids on physicochemical and structural features of lignins from sugarcane bagasse

We report the mechanisms behind lignin dissolution with protic ionic liquids (PILs) and their influence over lignin properties remain not fully explored. In this work, physicochemical and structural features of lignins extracted from sugarcane bagasse after pretreatment with a series of PILs (length of the cation chain combined with different anions) were assessed using analytical techniques. It was found that the lignin extracted with shorter chain length cations PILs showed the highest β-O-4 content. Opposite, the increase of the PILs cation chain length resulted in enhanced depolymerization. All lignins presented high polydispersity (>3.7), while the weight average molecular ranged from 1921 to 13,539 g/mol. The recovered [Eti][Mal] lignin presented the higher β-O-4 content and was possibly the most preserved lignin obtained. Opposite, lignin isolated from [Hex][Ac] and [Hex][For] treatments had less β-O-4 linkages attributed to the depolymerization of lignin via rupture of ether linkages generating intermediates that further repolymerized and/or depolymerized. These results suggest that the ionicity of the PIL is a crucial factor for lignin dissolution. Furthermore, these results illustrate that the proposed pretreatment using different PILs is useful to obtain high-quality lignins with distinct features and opens a new perspective for materials to match various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metal-organic framework supported single-site nickel catalysts for butene dimerization

Homotopic sites in a well-controlled environment are not only ideal systems for mechanistic studies, but also allow optimal control of catalytic transformations. Sites having only a single metal cation and sites consisting of metal oxo complexes with few nickel (Ni) cations supported on the nodes of UiO-66 metal-organic framework (Ni-UiO-66) are studied for 1-butene dimerization. Monomeric Ni sites, which bind to the Zr 6 node via two Zr-OH(µ3) linkages, are active and selective for the dimerization of 1-butene to linear and mono-branched C 8 isomers. Ni oxo complexes with few Ni cations show lower activity and promote the oligomerization of transiently formed C 8 isomers. In conclusion, Kohn-Sham density function theory calculations combined with spectroscopic measurements and kinetic analyses indicate that dimerization follows a Cossee-Arlman reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Identification and quantification of multinuclear Cu active sites derived from monomeric Cu moieties for dry NO oxidation over Cu-SSZ-13

The identification and quantification of multinuclear Cu-oxo cations in Cu-zeolites is a challenge amidst the dynamic nature of Cu ions in Cu-zeolites. Herein, we synthesized Cu-SSZ-13 zeolites containing varying densities of monomeric Cu cations (Z 2 Cu and ZCuOH, where Z represents an anionic site on the zeolite framework). The number of Cu-oxo cations, quantified using carbon monoxide temperature programmed reduction (CO-TPR), quadratically increased with increasing ZCuOH density, evidencing that proximal ZCuOH sites are precursors to Cu-oxo dimers. We also find that dehydrated proximal ZCuOH with overlapping diffusion radii of at most 0.5 nm can form Cu-oxo dimers. CO-TPR also revealed the presence of three distinct pools (i.e types) of Cu-oxo dimers; these pools catalyze dry NO oxidation at different turnover rates, with the fastest pool 2 to 30 times faster than the slowest pool. Finally, from reaction kinetics and rate law analysis, we also proposed a cohesive dry NO oxidation mechanism and demonstrated that nitrates detected by in situ FTIR are a spectator species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

How alkyl branching shapes structure in imidazolium and pyrrolidinium NTf 2 ionic liquids

High-energy X-ray scattering experiments and molecular dynamics (MD) simulations were carried out on ionic liquids (ILs) consisting of 1-alkyl-3-methylimidazolium and 1-alkyl-1-methylpyrrolidinium cations. These cations were paired with bis(trifluoromethylsulfonyl)amide anions and identical alkyl tails were used for both cationic species. The goal of this work is to investigate how the nanoscale structure of the ionic liquid changes with the length and with the degree of branching of the alkyl tail, for ILs having a common anion. We investigate spatial correlations in the intermolecular region, focusing on the intrinsic charge-charge interactions that characterize all ionic liquids, as well as the nanoscale domain segregation that is present in IL species with significant nonpolar components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗