Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bulk density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Tethers as Debris: Simulating Impacts of Kevlar Tethers on Shuttle Tiles

In a previous paper I examined the effects of impacts of polymer tethers on aluminum plates using the SPHC hydrodynamic code. In this paper I apply tether models to a new target - models of Space Shuttle tiles developed during the STS 107 accident investigation. In this three-dimensional simulation, a short tether fragment strikes a single tile supported on an aluminum backing plate. A tile of the LI-900 material is modeled. Penetration and damage to the tile and the backwall are characterized for three normal impact velocities. The tether is modeled as a bundle of eight 1-mm strands, with the bundle having dimensions 2-mm x 4-mm x 20-cm. The bulk material properties used are those of Kevlar(TradeMark) 49, for which a Mie-Gruneisen multiphase equation of state (eos) is used. In addition, the strength model is applied in a linear sense, such that tensile loads along the strand length are supported, but there is no strength in the lateral directions. Tile models include the various layers making up the tile structure. The outermost layer is a relatively dense borosilicate glass, known as RCG, 0.5-mm thick. The RCG layer is present on the top and four sides of the tile. Below this coating is the bulk of the tile, 1.8- in thick, made of LI-900, a product consisting of rigidized fiberous silica with a density of 9 lWft3. Below the main insulating layer is a bottom layer of the same material that has been treated to increase its density by approximately 69% to improve its strength. This densified layer is bonded to a Strain Isolation Pad (SIP), modeled as a refractory felt fabric. The SIP is bonded to an aluminum 2024 wall 0.1-in thick. The tile and backwall materials use a Me-Gruneisen multiphase eos, with the exception of the SIP felt, which uses a fabric equation of state. Fabrics must be crushed to the full bulk material density before bulk material properties and a Mie-Gruneisen eos are applied. Tether fragment impact speeds of 3,7, and 10 km/s are simulated, with impact velocities normal to the tile face. Damage results are presented in tabular format.

Evans, Steven W.↗
NASA NTRS1994

Survey of electron and ion bulk flows in the distant magnetotail with the Geotail spacecraft

A histogramic survey is reported for the electron and ion bulk flows in Earth's magnetotail at geocentric radial distances in the range of about 10 to 210 R(sub E) from the Comprehensive Plasma Instrumentation on board the Geotail spacecraft. Specifically the X-components of the bulk flows are examined for high ion temperatures, greater than 5 x 10(exp 6) K, and for the lower ion temperatures. This separation of plasmas provides a reasonably effective criterion for identifying the hot plasmas associated with the plasma sheet and its boundary layers and the colder plasmas found in the magnetotail lobes and magnetopause boundary layer. The survey shows that the distributions of earthward bulk flows of ions and electrons are similar for each of the two temperature regimes, respectively. However, average speeds for the ions and electrons as a function of radial distance are dissimilar in that the electron bulk speeds are greater than those for the ions. All average electron and ion bulk flows are directed tailward at geocentric radial distances greater than 30 R(sub E). The most striking dissimilarity in the occurrence frequencies of the bulk flows is the large number with high tailward speeds for the electrons, greater than 500 km/s, relative to those for the ions. It is found that the disparity in bulk flows is due to the presence of two ion velocity distributions, one with high temperatures and a bulk speed similar to that of the electrons and the second, colder distribution with higher number density and considerably lesser bulk flow speed.

Frank, L. A.↗
DOE OSTI2012

Monitoring phase behavior of hydrogen confined in carbon nanopores by in-situ small angle neutron scattering technique

We report on the use of in-situ small angle neutron scattering (SANS) technique to study the phase behavior of hydrogen confined in narrow pores of ultramicroporous carbon (UMC) with a very large surface area (2630 m2/g) and pore volume (1.3 cm3/g). The effect of pore size and pressure on hydrogen adsorbed on UMC at room temperature and pressures up to ~200 bar were investigated. In a previous experiment, we have measured the density of adsorbed H2 gas in the nanopores and mesopores of polyfurfuryl alcohol-derived activated carbon (PFAC) by SANS techniques. Here, a comparative SANS study between the UMC and PFAC was conducted in order to further investigate the densification of H2 as a function of pore size and pressure. Initial results suggest that the density of confined H2 in both UMC and PFAC is considerably higher than that of the bulk hydrogen gas. The density is systematically higher in the narrow pores and decreases with increasing pore size. These results clearly demonstrate the advantage of adsorptive storage over compressed gas storage and emphasize the greater efficiency of micropores over mesopores in the adsorption process, which can be used to guide the development of new carbon adsorbents tailored for maximum H2 storage capacities at near-ambient temperatures.

adsorption↗
DOE OSTI2014

Properties of liquid clusters in large-scale molecular dynamics nucleation simulations

We have performed large-scale Lennard-Jones molecular dynamics simulations of homogeneous vapor-to-liquid nucleation, with 10{sup 9} atoms. This large number allows us to resolve extremely low nucleation rates, and also provides excellent statistics for cluster properties over a wide range of cluster sizes. The nucleation rates, cluster growth rates, and size distributions are presented in Diemand et al. [J. Chem. Phys. 139, 74309 (2013)], while this paper analyses the properties of the clusters. We explore the cluster temperatures, density profiles, potential energies, and shapes. A thorough understanding of the properties of the clusters is crucial to the formulation of nucleation models. Significant latent heat is retained by stable clusters, by as much as ΔkT = 0.1ε for clusters with size i = 100. We find that the clusters deviate remarkably from spherical—with ellipsoidal axis ratios for critical cluster sizes typically within b/c = 0.7 ± 0.05 and a/c = 0.5 ± 0.05. We examine cluster spin angular momentum, and find that it plays a negligible role in the cluster dynamics. The interfaces of large, stable clusters are thinner than planar equilibrium interfaces by 10%−30%. At the critical cluster size, the cluster central densities are between 5% and 30% lower than the bulk liquid expectations. These lower densities imply larger-than-expected surface areas, which increase the energy cost to form a surface, which lowers nucleation rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1949

Heat Transfer from High-Temperature Surfaces to Fluids. III - Correlation of Heat-Transfer Data for Air Flowing in Silicon Carbide Tube with Rounded Entrance, Inside Diameter of 3/4 Inch, and Effective Length of 12 Inches: Correlation of Heat-Transfer Data for Air Flowing in Silicon Carbide Tube with Rounded Entrance, Inside Diameter of 3/4 Inch, and Effective Length of 12 Inches - Part 3

A heat-transfer investigation was conducted with air flowing through an electrically heated silicon carbide tube with a rounded entrance, an inside diameter of 3/4 inch, and an effective heat-transfer length of 12 inches over a range of Reynolds numbers up to 300,000 and a range of average inside-tube-wall temperature up to 2500 R. The highest corresponding local outside-tube-wall temperature was 3010 R. Correlation of the heat-transfer data using the conventional Nueselt relation wherein physical properties of the fluid were evaluated at average bulk temperature resulted in a separation of data with tube-wall-temperature level. A satisfactory correlation of the heat-transfer data was obtained, however, by the use of modified correlation parameters wherein the mass velocity G (or product of average air density and velocity evaluated at bulk temperature P(sub b)V(sub b)) in the Reynolds number was replaced by the product of average air velocity evaluated at the bulk temperature and density evaluated at either the average inside-tube-wall temperature or the average film temperature; in addition, all the physical properties of air were correspondingly evaluated at either the average inside-tube-wall temperature or the average film temperature.

Sams, Eldon W.↗
DOE OSTI2024

Study of Void Formation at the Lithium|Solid Electrolyte Interface

There is growing recognition of the critical role of void formation in lithium metal anodes in solid-state batteries and its impact on electrochemical performance. While experimental studies have demonstrated the challenges ensuing from void formation at the lithium metal interface with the solid electrolyte, there is a need to understand and quantify the role of intrinsic transport properties in lithium metal and the impact of external stimuli, such as temperature, pressure, and current density. Here, we develop this understanding by constructing a phase field-based model that captures the evolution of void domains at the lithium-solid electrolyte interface. Growth of the pores is driven by the fast removal of lithium from the interface during stripping at high current densities. Relative magnitudes of the bulk and surface lithium diffusivities, along with the applied current density, dictate the final pore morphology. Increasing the temperature results in faster diffusion, while external applied pressure causes creep flow of lithium, both of which help to mitigate the evolution of voids by quickly transporting metal from the bulk to the interface. Finally, a phase map as a function of temperature and pressure is developed as a guide to determine the regions that can lead to the stable cycling of lithium metal.

25 ENERGY STORAGE↗
DOE OSTI2017

Probability density of tunneled carrier states near heterojunctions calculated numerically by the scattering method.

The energy-dependent probability density of tunneled carrier states for arbitrarily specified longitudinal potential-energy profiles in planar bipolar devices is numerically computed using the scattering method. Results agree accurately with a previous treatment based on solution of the localized eigenvalue problem, where computation times are much greater. These developments enable quantitative treatment of tunneling-assisted recombination in irradiated heterojunction bipolar transistors, where band offsets may enhance the tunneling effect by orders of magnitude. The calculations also reveal the density of non-tunneled carrier states in spatially varying potentials, and thereby test the common approximation of uniform- bulk values for such densities.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Thermal conductivity of GaN, 71 GaN, and SiC from 150 K to 850 K

The thermal conductivity (Λ) of wide-band-gap semiconductors GaN and SiC is critical for their application in power devices and optoelectronics. Here, we report time-domain thermoreflectance measurements of Λ in GaN, 71 GaN, and SiC between 150 and 850 K. The samples include bulk c- and m-plane wurtzite GaN grown by hydride vapor phase epitaxy (HVPE) and ammonothermal methods; homoepitaxial natural isotope abundant GaN and isotopically enriched 71 GaN layers with thickness of 6–12 μm grown on c-, m-, and a-plane GaN substrates grown by HVPE; and bulk crystals of 4H and 6H SiC. In low dislocation density (<10 7 cm –2 ) bulk and homoepitaxial GaN, Λ is insensitive to crystal orientation and doping concentration (for doping <10 19 cm –3 ); Λ ≈ 200 W m –1 K –1 at 300 K and ≈ 50 W m –1 K –1 at 850 K. In 71 GaN epilayers at 300 K, Λ is ≈15% higher than in GaN with natural isotope abundance. The measured temperature dependence of Λ in GaN is stronger than predicted by first-principles based solutions of the Boltzmann transport equation that include anharmonicity up to third order. This discrepancy between theory and experiment suggests possible significant contributions to the thermal resistivity from higher-order phonon scattering that involve interactions between more than three phonons. The measured Λ of 4H and 6H SiC is anisotropic, in good agreement with first-principles calculations, and larger than GaN by a factor of ≈1.5 in the temperature range 300 < T < 850K. Furthermore, this paper provides benchmark knowledge about the thermal conductivity in wide-band-gap semiconductors of GaN, 71 GaN, and SiC over a wide temperature range for their applications in power electronics and optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Beam emittance preservation using Gaussian density ramps in a beam-driven plasma wakefield accelerator

A current challenge that is facing the plasma wakefield accelerator (PWFA) community is transverse beam emittance preservation. This can be achieved by balancing the natural divergence of the beam against the strong focusing force provided by the PWFA plasma source in a scheme referred to as beam matching. One method to accomplish beam matching is through the gradual focusing of a beam with a plasma density ramp leading into the bulk plasma. Here, the beam dynamics in a Gaussian plasma density ramp are considered, and an empirical formula is identified that gives the ramp length and beam vacuum waist location needed to achieve near-perfect matching. The method uses only the beam vacuum waist beta function as an input. Numerical studies show that the Gaussian ramp focusing formula is robust for beta function demagnification factors spanning more than an order of magnitude with experimentally favourable tolerances for future PWFA research facilities. This article is part of the Theo Murphy meeting issue ‘Directions in particle beam-driven plasma wakefield acceleration’.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Interface and Thermophysical Properties of R 32 Refrigerant

Driven by the urgent demand for efficient cooling in microelectronics and advanced thermal management systems, difluoromethane (R32/CH 2 F 2 ) has emerged as a promising candidate owing to its favorable thermophysical properties, including high heat transfer efficiency and low viscosity. While bulk properties such as density, viscosity, and thermal conductivity have been widely studied, interfacial properties, including surface tension and interfacial thickness, remain comparatively underexplored, despite their importance in phase-transition dynamics. Here, we perform molecular dynamics (MD) simulations from 180 to 300 K using an optimized transferable force field for fluoropropenes with enhanced electrostatics to assess both bulk and interfacial behavior of R32. Simulations reproduced density within ±2.1%, viscosity within 3.05%, and thermal conductivity within 7.41% of NIST reference data. Heat capacities (C p and C v ) were predicted within 5%. For interfacial properties, surface tension trends were reproduced within 13.58% deviation, and the vapor–liquid coexistence curve closely matched reference data, yielding a critical temperature of 345.7 K (1.6% deviation) and a critical density of 0.397 g/cm 3 (6.4% deviation). Importantly, the vapor–liquid interface exhibited pronounced temperature-dependent broadening across the 180–290 K range. This behavior correlates with increasing molecular kinetic energy, reduction in intermolecular cohesive interactions, and a progressive loss of preferential dipole alignment, which collectively enhance thermal fluctuation amplitudes at elevated temperatures. These validated results provide predictive molecular-level insights, particularly for interfacial properties that remain less characterized. By reducing property prediction errors in key parameters such as critical temperature, this work provides reliable inputs for heat-exchanger and system models. Such correlations can support optimized component sizing, improved performance, and reduced refrigerant charge. Beyond R32, the methodology offers a transferable framework for blended and next-generation low-GWP refrigerants, contributing to sustainable thermal management aligned with the 2027 EU F-Gas regulation and 2030 Kigali Amendment.

Fluids↗
DOE OSTI2023

Energetics of silicon in the bulk and near surfaces of tungsten: a first-principles study

Abstract Siliconization of the tokamak walls is a candidate method to improve plasma confinement in fusion tokamaks containing tungsten plasma facing components (W PFCs). To understand the interactions of silicon (Si) with W, the Si behavior in bulk W, and near three low-index W surfaces ((100), (110) and (111)) has been investigated using first-principles density functional theory. In bulk W, Si interstitial atoms have a low solution ability and high mobility, and Si atoms can be strongly trapped by W vacancies. The interaction between two Si adatoms is responsible for the stability of adatom superstructures on W surfaces, consistent with previous experimental observation (Tsong and Casanova 1981 Phys. Rev. Lett. 47 113). Although the coverage dependence of Si adsorption and diffusion energetics on surfaces is related to surface orientation, the W(110) surface has lower Si adsorption affinity and higher Si diffusivity than either the W(111) or W(100) surfaces. The most stable Si adatom superstructure on W surfaces is: square c(2 × 2) pattern on W(100) covered with 0.5 ML Si; rectangular c(4 × 2) pattern on W(110) with 0.25 ML Si; and rhombus p(1 × 1) pattern on W(111) with 1 ML Si. The coverage dependence of Si mobility on/toward W surfaces is generally related to the stability of the Si superstructures as a function of coverage on each surface. Interestingly, Si adatoms prefer to transport below the surface and into W subsurface by an exchange mechanism with W atoms, indicating the likelihood of epitaxial growth of W silicide layers on W surfaces during the operation of W PFCs.

Yang, L. (ORCID:0000000322166071)↗
DOE OSTI2018

Amplicon Sequencing Reveals Microbiological Signatures in Spent Nuclear Fuel Storage Basins

Water quality is an important determinant for the structural integrity of alloy cladded fuels and assemblies during long-term wet storage. Detailed characterization of a water filled storage basin for spent nuclear reactor fuel was performed following the formation and proliferation of an amorphous white flocculent. White precipitant was sampled throughout the storage basin for chemical and spectroscopic characterization, and eDNA was extracted for pyrosequencing of bacterial rRNA gene diversity. Accordingly, spectroscopic analyses indicated the precipitant to be primarily amorphous to crystalline aluminum (oxy) hydroxides with minor associated elemental components including Fe, Si, Ti, and U. High levels of dissolved carbon were co-localized with the precipitant relative to bulk water. Bacterial densities were highly variable between sampling locations and with depth; cell numbers (log scale) ranged from 5.6 to 4.89 cells / mL. Bacterial diversity that was physically associated with the aluminum (oxy) hydroxide complexes exceeded an estimated 4,000 OTUs / amplicon library (3% cutoff) and the greatest percent majority of sequences were aligned to the families Burkholderiales (23%), Nitrospiraceae (23%), Hyphomicrobiaceae (17%), and Comamonadaceae (6%). We surmise that episodic changes in the physical and chemical properties of the basin contribute to the polymerization of aluminum (oxy) hydroxides, which in turn can chemisorb nutrients, carbon ligands and bacterial cells from the surrounding bulk aqueous phase. As such, these precipitants should establish favorable microhabitats for bacterial colonization and growth. Comparative analyses of 16S rRNA gene amplicon libraries across diverse environmental landscapes were performed and microbiological signatures unique to the spent nuclear fuel storage basin environment were revealed. These insights could spur the development of tractable bioindicators that are specific of and diagnostic for water quality at discrete locations and finer scales of resolution, marking an important contribution for improved water quality and management of spent nuclear fuel storage facilities.

aluminum↗
DOE OSTI2022

Breakdown characteristics of deep-ultraviolet Al 0.6 Ga 0.4 N p-i-n avalanche photodiodes

A top-illuminated deep-ultraviolet Al 0.6 Ga 0.4 N p-i-n avalanche photodiode (APD) structure was designed and grown by metalorganic chemical vapor deposition on an AlN bulk substrate and on two different quality AlN/sapphire templates, and APDs were fabricated and tested. The APD devices with a circular diameter of 20 μm have demonstrated a distinctive reverse-bias breakdown behavior. The reverse breakdown voltage of the APDs is approximately -140 V, which corresponds to a breakdown electric field of 6–6.2 MV/cm for the Al 0.6 Ga 0.4 N material as estimated by Silvaco TCAD simulation. The APDs grown on the AlN bulk substrate show the lowest leakage current density of < 1 × 10 -8 A/cm 2 (at low reverse bias) compared to that of the devices grown on the AlN templates. From the photocurrent measurement, a maximum gain (current limited) of 1.2 × 10 4 is calculated. The average temperature coefficients of the breakdown voltage are negative for APD devices fabricated from both the AlN bulk substrate and the AlN templates, but these data show that the coefficient is the least negative for the APD devices grown on the low-dislocation-density AlN bulk substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

On the pressure and temperature dependence of adsorption densities and other thermodynamic properties in gas shales

Black shale source rocks have become a key natural gas resource in the US and China. Unlike in conventional hydrocarbon reservoirs, a significant fraction of the gas in shales is adsorbed onto the inordinate specific surface areas (SSA) of micropores inside organic matter with densities exceeding those of bulk gas by an order of magnitude. Yet, the distribution of adsorbed versus bulk gas remains poorly understood. Experiments measure excess adsorption isotherms, which are corrected to absolute adsorption amounts by a factor that involves the density, &#x3C1; abs , of the adsorption layer(s). Constant values of &#x3C1; abs are widely used in the literature but, we argue, are inconsistent with the pressure- and temperature-dependence of adsorption behavior. In this work, we propose a more reliable approach that assumes a constant volume of each adsorption layer that can be determined from the SSA of the substrate. We measure nine high-pressure methane excess adsorption isotherms up to 15 MPa for three shale samples from China and Germany at temperatures of 65, 75, and 95 °C, and low-pressure carbon dioxide and nitrogen isotherms to estimate the SSA. We also investigate another 24 isotherms at 35, 50, and 60° C or 8 Chinese shale samples and 3 isotherms at 60, 90, and 120° C for an Argentinian shale sample from the literature. A new variation of the multi-layer Ono-Kondo lattice model is introduced to derive the temperature and pressure dependent adsorption layer densities, which are subsequently used to obtain the absolute adsorption isotherms of interest. Finally, this practical methodology has the potential to significantly improve our estimates of shale gas-in-place resources, and adsorption modeling more broadly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗