Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Understanding why poly(acrylic acid) works: decarbonylation and cross-linking provide an ionically conductive passivation layer in silicon anodes

Poly(acrylic acid) (PAA) is commonly used as a binder for fabricating silicon (Si) anode active materials in lithium-ion batteries due to its useful properties including high polar solvent solubility, good rheology, and strong adhesive properties. However, the role and evolution of PAA during electrode fabrication, cycling, and calendar aging are not well understood. In this work, we reveal the evolution of PAA during electrode curing and relate its chemical change to the final electrode properties and performance. These studies are made possible using two types of in situ attenuated total reflectance-infrared Fourier transform (ATR-FTIR) spectroscopy: thermal ATR-FTIR to probe the cross-linking reaction, and ATR-FTIR spectroelectrochemistry of three-dimensional composite electrodes, a unique technique developed herein that probes the solvation dynamics of lithium ions at the silicon anode interface under electrochemical polarization. Specifically, we show that PAA undergoes a thermally-mediated, cross-linking decarbonylation reaction to form an ether-based network polymer. To show the importance of the polyether moieties, we synthesize partially esterified PAA analogues that do not undergo this cross-linking decarbonylation reaction and correlate the degree of cross-linking to half-cell performance metrics. Finally, we unveil the mechanism of the polyether binder performance through in situ ATR-FTIR spectroelectrochemistry and show that PAA acts as an interfacial material that conducts lithium-ions, limits solvent molecule access to the Si surface, and stabilizes the electrode against parasitic lithium inventory loss at high state of charge for an extended period of time.

25 ENERGY STORAGE↗

Work from Home Patterns across COVID-19 Waves: Implications for Future Transportation

The unprecedented rise in work from home (WFH) during COVID-19 poses challenges for the transportation engineers and planners with the travel demand forecasting. If WFH persists post-pandemic, it could influence traffic patterns, reducing peak-hour congestion. However, the evolution of WFH decisions across pandemic phases and varying socio-economic contexts remains unclear. This study examines factors influencing WFH choices using data from the US Census Bureau’s Household Pulse Survey. Findings reveal a decline in WFH participation from 60% during the first wave to 38% by the third wave of the COVID-19 pandemic. A Geographically Weighted Regression model highlights the influence of socio-economic, household, and COVID-19-related variables, with notable spatial variability. Results show that younger individuals, females, and households with children are consistently more likely to WFH, while non-white and higher income individuals have an increasing likelihood for WFH as the pandemic progresses. These insights inform future transportation planning, emphasizing equity and decentralization strategies for post-pandemic commuting.

Patwary, Latif [ORNL] (ORCID:0000000189174928)↗

Working Group I Report (Theory)

The summary of the talks and discussions in Working Group I (Neutrino Oscillation Physics) at the NuFact08 workshop is presented here.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Summary Report of Working Group 1: Laser-Plasma Acceleration

Advances in and physics of the acceleration of particles using underdense plasma structures driven by lasers were the topics of presentations and discussions in Working Group 1 of the 2010 Advanced Accelerator Concepts Workshop. Such accelerators have demonstrated gradients several orders beyond conventional machines, with quasi-monoenergetic beams at MeV-GeV energies, making them attractive candidates for next generation accelerators. Workshop discussions included advances in control over injection and laser propagation to further improve beam quality and stability, detailed diagnostics and physics models of the acceleration process, radiation generation as a source and diagnostic, and technological tools and upcoming facilities to extend the reach of laser-plasma accelerators.

43 PARTICLE ACCELERATORS↗

Summary Report of Working Group 4: Plasma Wakefield Acceleration

This report gives a guide to the discussions of Working Group 4 of the 2010 Advanced Accelerator Concepts Workshop, which was devoted to theory, simulation and experimental issues associated with plasma wakefield acceleration (PWFA). Sessions were organized thematically in this group, concentrating on broad issues of: exploitation of future facilities such as FACET; pushing the accelerating gradient beyond the current frontier, to over a TeV/m; use of positively charged beams to drive plasma wakes; resonant excitation of the PWFA with pulse trains; beam-plasma instabilities; and injection and capture of electron beams into PWFA systems.

43 PARTICLE ACCELERATORS↗

Thermodynamics of the interconversion of heat and work via plasma electric fields

Thermodynamics of a system where a group of cold charged particles locally confined in a volume V{sub P} within a warm plasma of temperature T and volume V (V{sub P}<V) is presented. Various thermodynamic functions of the model, e.g., Helmholtz free energy, internal energy, entropy, electrostatic pressure of charged particles, are calculated from first principles. In the homogeneous limit, an equation of state for the electrostatic (ES) pressure of charged particles is derived and the internal energy is shown to consist solely of the thermal energy of the background plasma. The interconversion of plasma heat and mechanical work via isothermal compression/expansion of plasma electric field (associated with charged particles) in a plasma heat pump and ES heat engine cycle is demonstrated. The efficiency of the plasma heat pump is discussed in terms of its power efficiency {eta}{sub P} and is shown to be close to unity

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inter-conversion of Work and Heat With Plasma Electric Fields

Thermodynamics of a model system where a group of cold charged particles locally confined in a volume V{sub P} within a warm plasma of temperature T and fixed volume V (V{sub P}<<V) is presented. Various thermodynamic functions of the model e.g., Helmhotz free energy, internal energy, entropy, electrostatic pressure of charged particles are calculated from first principles. In the homogeneous limit, an equation of state for the ES pressure of charged particles is derived and the internal energy is shown to consist solely of the thermal energy of the back ground plasma. Finally, the direct conversion of plasma heat into mechanical work is demonstrated via a Striling like engine cycle involving ES isothermal compression of plasma electric fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gas dynamic aspects of silicon thin layers deposition using excitation of a free jet of the working gas mixture by an electron beam

A film of microcrystalline silicon ({mu}c-Si:H) deposited at low temperature is a promising material for thin-film silicon solar cells with high efficiency and high stability. To deposit silicon thin films with high deposition rate and high quality, a novel gas-jet deposition method has been developed. The paper is devoted to experimental and numerical study of the method from the gas dynamic point of view. A numerical model of the flow field of the working gas mixture in the device was developed that provides predictions of the film thickness distribution over the substrate surface and was found to describe the measured data satisfactory. The model may be used to optimize the operating parameters of the device.

36 MATERIALS SCIENCE↗

A high sensitivity fiber optic macro-bend based gas flow rate transducer for low flow rates: Theory, working principle, and static calibration

A novel fiber optic macro-bend based gas flowmeter for low flow rates is presented. Theoretical analysis of the sensor working principle, design, and static calibration were performed. The measuring system consists of: an optical fiber, a light emitting diode (LED), a Quadrant position sensitive Detector (QD), and an analog electronic circuit for signal processing. The fiber tip undergoes a deflection in the flow, acting like a cantilever. The consequent displacement of light spot center is monitored by the QD generating four unbalanced photocurrents which are function of fiber tip position. The analog electronic circuit processes the photocurrents providing voltage signal proportional to light spot position. A circular target was placed on the fiber in order to increase the sensing surface. Sensor, tested in the measurement range up to 10 l min{sup -1}, shows a discrimination threshold of 2 l min{sup -1}, extremely low fluid dynamic resistance (0.17 Pa min l{sup -1}), and high sensitivity, also at low flow rates (i.e., 33 mV min l{sup -1} up to 4 l min{sup -1} and 98 mV min l{sup -1} from 4 l min{sup -1} up to 10 l min{sup -1}). Experimental results agree with the theoretical predictions. The high sensitivity, along with the reduced dimension and negligible pressure drop, makes the proposed transducer suitable for medical applications in neonatal ventilation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Phase space gradient of dissipated work and information: A role of relative Fisher information

We show that an information theoretic distance measured by the relative Fisher information between canonical equilibrium phase densities corresponding to forward and backward processes is intimately related to the gradient of the dissipated work in phase space. We present a universal constraint on it via the logarithmic Sobolev inequality. Furthermore, we point out that a possible expression of the lower bound indicates a deep connection in terms of the relative entropy and the Fisher information of the canonical distributions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low beryllium content Zr-based bulk metallic glass composite with plasticity and work hardenability

A modified Zr-based bulk metallic glass matrix composite Zr{sub 47.67}Cu{sub 40}Ti{sub 3.66}Ni{sub 2.66}Be{sub 6} has been produced by increasing the contents of elements of Zr and Cu with higher Poisson ratio and reducing the contents of Ti, Ni, and Be elements with lower Poisson ratio based on famous metallic glass former Vitreloy 1. A compressive yielding strength of 1804 MPa, fracture strength of 1938 MPa and 3.5% plastic strain was obtained for obtained metallic glass composite. Also, work-hardening behavior was observed during compressive experiment which was ascribed to the interaction of the in situ precipitated CuZr phase and shear bands.

36 MATERIALS SCIENCE↗

Near-field thermodynamics: Useful work, efficiency, and energy harvesting

We show that the maximum work that can be obtained from the thermal radiation emitted between two planar sources in the near-field regime is much larger than that corresponding to the blackbody limit. This quantity, as well as an upper bound, for the efficiency of the process is computed from the formulation of thermodynamics in the near-field regime. The case when the difference of temperatures of the hot source and the environment is small, relevant for energy harvesting, is studied in detail. We also show that thermal radiation energy conversion can be more efficient in the near-field regime. These results open new possibilities for the design of energy converters that can be used to harvest energy from sources of moderate temperature at the nanoscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of the surface free energy of the ITO thin films deposited under different working pressure

This study discusses the influence of working pressure on the surface energy of the ITO thin films produced by radio frequency magnetron sputtering method. Optical tensiometer (Attension Theta Lite) is used for evaluating wetting behavior of the water droplet on the film surface and Equation of State method was selected to determine surface free energy for this study. Equation of state method does not divide the surface tension into different components such as polar, dispersive, acid-base. It is calculated the surfaces’ free energy measuring the contact angle with a single liquid. The surface free energy value was in the range of 15-31 mN/m. Also, the transmittances were determined in the wavelength range between 200 and 1000 nm using the UNICO 4802 UV-Vis double beam spectrophotometer. Transmittances of the produced ITO thin films are greater than %70 in the visible range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The mechanical properties of austenite stainless steel 304 after structural deformation through cold work

The 304 stainless steel (SS) type is widely used in oil and gas operations due to its excellent corrosion resistance. However, the presence of the fine sand particles and H{sub 2}S gas contained in crude oil could lead the erosion and abrasion in steel. In this study, cold rolled treatments were conducted to the 304 SS in order to increase the wear resistance of the steel. The cold work has resulted in thickness reduction to 20%, 40% and 60% of the original. Various microstructural characterizations were used to analyze the effect of deformation. The hardness characterization showed that the initial hardness value increased from 145 HVC to 395 HVC as the level of deformation increase. Further, the wear resistance increased with the deformation rate from 0% to 40% and subsequently decreased from 40% to 60% deformation rate. Microstructural characterization shows that the boundary change to coincide by 56 µm, 49 µm, 45 µm, and 43 µm width and the grain go to flatten and being folded like needles. The effect of deformation on the grain morphology and structure was also studied by optical metallography and X-Ray Diffraction. It is shown that the deformation by means of a cold rolled process has transformed the austenite structure into martensitic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Long working distance objective lenses for single atom trapping and imaging

We present a pair of optimized objective lenses with long working distances of 117 mm and 65 mm, respectively, that offer diffraction limited performance for both Cs and Rb wavelengths when imaging through standard vacuum windows. The designs utilise standard catalog lens elements to provide a simple and cost-effective solution. Objective 1 provides NA = 0.175 offering 3 μm resolution whilst objective 2 is optimized for high collection efficiency with NA = 0.29 and 1.8 μm resolution. This flexible design can be further extended for use at shorter wavelengths by simply re-optimising the lens separations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗