Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIRES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Microstructural evolution and mechanical properties of maraging steel produced by wire + arc additive manufacture process

Highlights: • Wire + arc additive manufacture (WAAM) was applied to produce maraging steel structures. • Microstructure evolution of WAAM alloy was characterized and correlated with the layer-by-layer building manner. • Mechanical properties of WAAM alloy were tested and correlated with the aging response of WAAM microstructure. • Retained austenite content was measured and correlated with the tensile strength loss. - Abstract: Wire + arc additive manufacture is developed for producing large-scale metallic components. In this paper, maraging steel parts were produced, and the microstructure and mechanical properties were investigated. The microhardness and tensile strength of the as deposited alloy reduced from the bottom to the top due to the transient thermal cycling, which resulted in partial aging and non-uniform formation of intermetallic compounds along the building direction. Solutionizing, followed by 3 h aging, significantly reduced the microstructural heterogeneity and increased the mechanical properties by 24.7% through the formation of large amounts of finely distributed precipitates. The as deposited alloy possessed superior strength to the wrought alloy in solutionized condition but inferior to the later in aged condition, which was attributed to the less pronounced aging response of the low-angle columnar grains characterized microstructure and the presence of retained and reverted austenite.

36 MATERIALS SCIENCE↗

Synthesis and characteristic of FeNi{sub 3} intermetallic compound obtained by electrical explosion of wire

In this work, the FeNi{sub 3} permalloy nanopowder was synthesized by wire explosion in deionized water. X-ray diffraction was used to identify and characterize the prepared nanopowder exhibiting a FeNi{sub 3} phase. The morphology and size of the prepared powders were observed by field emission-scanning electron microscopy and transmission electron microscopy. The compositions of the wire before exploding and the nanopowder were determined with electron probe microanalysis. The results indicate that the FeNi{sub 3} permalloy nanopowder was synthesized with an average particle size {approx}50 nm. The magnetic properties of the nanopowder indicate a symmetric hysteresis loop of ferromagnetic behavior with coercivity of 199.3 Oe and saturation magnetization of 56.7 emu/g.

36 MATERIALS SCIENCE↗

Electrochemical properties of Sn-based nanopowders synthesized by a pulsed wire evaporation method and effect of binder coating

Highlights: • Sn-based nanoparticles are fabricated by using the pulsed wire evaporation method. • The electrodes are prepared by mixing the graphene and coating the surface. • Coating the surface of electrode is used with brushing of simple and facile method. • The electrochemical measurements are performed with galvanostatic experiments. • The coating electrode maintains capacity nearly of 501 mAh g{sup −1} up to 100 cycles. - Abstract: Sn-based nanoparticles are prepared with the O{sub 2} concentrations in chamber of Ar atmosphere (by v/v) by using the pulsed wire evaporation (PWE) method. The prepared electrodes are only Sn-based powder electrode, its binder coating electrode and Sn-based powder/graphene nanocomposite electrode. Morphology and structure of the synthesized powders and electrodes are investigated with a field emission scanning electron microscope (FE-SEM) and an X-ray diffraction (XRD) analysis. The electrochemical measurements were performed with galvanostatic cycling experiments using a coin type cell of CR2032 (Ø20, T3.2 mm). The binder coating electrode is superior to others and maintains delithiation capacity nearly of 501 mAh g{sup −1} as 58.3% of first delithiation capacity at 0.2 C-rate up to 100 cycles.

36 MATERIALS SCIENCE↗

Application of active quenching of second generation wire for current limiting

Superconducting fault current limiters (SFCL's) are increasingly implemented in the power grid as a protection of substation equipment from fault currents. Resistive SFCL's are compact and light, however they are passively triggered and thus may not be sufficiently sensitive to respond to faults in the distribution grid. Here, we explore the prospect of adding an active management feature to a traditional resistive SFCL. A flexible radio-frequency coil, which is an integral part of the switching structure, acts as a triggering device. We show that the application of a short, 10 ms, burst of ac magnetic field during the fault triggers a uniform quench of the wire and significantly reduces the reaction time of the wire at low currents. The ac field burst generates a high density of normal zones, which merge into a continuous resistive region at a rate much faster than that of sparse normal zones created by the transport current alone.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-energy synchrotron X-ray diffraction measurements of simple bending of pseudoelastic NiTi shape memory alloy wires

Many technological applications of austenitic shape memory alloys (SMAs) involve cyclical mechanical loading and unloading in order to take advantage of pseudoelasticity. In this paper, we investigated the effect of mechanical bending of pseudoelastic NiTi SMA wires using high-energy synchrotron radiation X-ray diffraction (SR-XRD). Differential scanning calorimetry was performed to identify the phase transformation temperatures. Scanning electron microscopy images show that micro-cracks in compressive regions of the wire propagate with increasing bend angle, while tensile regions tend not to exhibit crack propagation. SR-XRD patterns were analyzed to study the phase transformation and investigate micromechanical properties. By observing the various diffraction peaks such as the austenite (200) and the martensite ( ${\bar 1}12$ ), ( ${\bar 1}03$ ), ( ${\bar 1}11$ ), and (101) planes, intensities and residual strain values exhibit strong anisotropy, depending upon whether the sample is in compression or tension during bending.

Zhang, Baozhuo↗

Probing the Irradiation Defects in Enhanced 2G High Temperature Superconducting Wire

In this paper, we present a detailed investigation of the atomic and chemistry structures of irradiation defects in AMSC’s second generation (2G) HTS coil wire by using aberration-corrected scanning transmission electron microscopy (AC-STEM) coupled with atomic resolution electron energy loss spectroscopy (EELS). A 1.2μm thick Dy-doped YBCO films was deposited onto Ni(5at%)W RABiTS substrate by metal organic deposition (MOD) process [6]. The ion irradiation was carried out at Brookhaven National Laboratory using the tandem Van de Graaff accelerators with 18-MeV Au 5+ ions to a dose of 2×10 11 Au/cm 2 along the c-axis of YBCO film. Prior to the irradiation, the coil wire sample has a 77 K, self-field Ic of around 385 A/cm-w. In comparison, the value decreased to 320 A/cm-w after irradiation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Emerged Metallicity in Molecular Ferromagnetic Wires

Supramolecular engineering bridges molecular assembly with macromolecular charge-transfer salts, promising the design to construct supramolecular architectures that integrate cooperative properties difficult or impossible to find in conventional lattices. Here, we report the crystal engineering design and kinetic growth of one-dimensional supramolecular wires composed of bis(ethylenedithio)tetrathiafulvalene (ET + ) cation and polymeric Cu[N(CN) 2 ] 2 – anion. A bulk ferromagnetic order is discovered for filling up the gap where strong ferromagnetism is missing in such ET molecule-based charge-transfer salts. Metallicity is induced by electric current from the semiconducting wire, which is attributed to strain effect by tuning its close molecular contact. This structural feature is evidenced through the combination of various mechanistic spectroscopic studies. Further, electric dipole is established from the close molecular contacts and is suggestive to stabilize ferromagnetic spin interaction through anions bridging spin sites. The breakthrough shown here provides a pathway to explore low-dimensional supramolecular materials exhibiting strong electron correlation, metallicity, and ferromagnetism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Possible Dynamically Gated Conductance along Heme Wires in Bacterial Multiheme Cytochromes

The staggered cross decaheme configuration of electron transfer co-factors in the outer-membrane cytochrome MtrF may serve as a prototype for conformationally-gated multi-heme electron transport. Derived from the bacterium Shewanella oneidensis, the staggered cross configuration reveals intersecting c-type octaheme and tetraheme “wires” containing thermodynamic “hills” and “valleys”, suggesting that the protein structure may include a dynamical mechanism for conductance and pathway switching depending on enzymatic functional need. Recent molecular simulations have established the pair-wise electronic couplings, redox potentials, and reorganization energies to predict the maximum conductance along the various heme wire pathways by sequential hopping of a single electron (PNAS (2014) 11,611-616). Here, we expand this information with classical molecular and statistical mechanics calculations of large-amplitude protein dynamics in MtrF, to address its potential to modulate pathway conductance, including assessment of the effect of the total charge state. Explicit solvent molecular dynamics simulations of fully oxidized and fully reduced MtrF employing ten independent 50-ns simulations at 300 K and 1 atm showed that reduced MtrF is more expanded and explores more conformational space than oxidized MtrF, and that heme reduction leads to increased heme solvent exposure. The slowest mode of collective decaheme motion is 90% similar between the oxidized and reduced states, and consists primarily of inter-heme separation with minor rotational contributions. The frequency of this motion is 1.7×107 s 1 for fully-oxidized and fully-reduced MtrF, respectively, slower than the downhill electron transfer rates between stacked heme pairs at the octaheme termini and faster than the electron transfer rates between parallel hemes in the tetraheme chain. This implies that MtrF uses slow conformational fluctuations to modulate electron flow along the octaheme pathway, apparently for the purpose of increasing the residence time of electrons on lowest potential hemes 4 and 9. This apparent gating mechanism should increase the success rate of electron transfer from MtrF to low potential environmental acceptors via these two solvent-exposed hemes.

c-type cytochromes, MtrF, Shewanella oneidensis, h↗

Unidirectional photonic wire laser

Photonic wire lasers are a new genre of lasers that have a transverse dimension much smaller than the wavelength. Unidirectional emission is highly desirable as most of the laser power will be in the desired direction. Owing to their small lateral dimension relative to the wavelength, however, the mode mostly propagates outside the solid core. Consequently, conventional approaches to attach a highly reflective element to the rear facet, whether a thin film or a distributed Bragg reflector, are not applicable. In this paper, we propose a simple and effective technique to achieve unidirectionality. Terahertz quantum-cascade lasers with distributed feedback (DFB) were chosen as the platform of the photonic wire lasers. Unidirectionality is achieved with a power ratio of the forward/backward of about eight, and the power of the forward-emitting laser is increased by a factor of 1.8 compared with a reference bidirectional DFB laser. Finally and furthermore, we achieved a wall plug power efficiency of ~1%.

47 OTHER INSTRUMENTATION↗

Supramolecular assembly of molecular wires alternating crown ethers and metal–halide complexes

Metal–halide complexes serve as key emissive centres in halide perovskites; however, precise control over their spatial organization through bottom-up assembly is challenging. Here we show that a crown-ether-assisted supramolecular assembly strategy can alternatingly connect metal–halide complexes and (crown ether@A) 2+ (where ‘A’ is an alkaline earth metal cation) complexes into a one-dimensional molecular wire, which can then be packed into a hexagonal crystal structure. This process resulted in the creation of an (18C6@Ba)MnBr 4 single crystal with green emission, achieving over 80% photoluminescence quantum yield and a narrow full width at half maximum. In addition, the non-centrosymmetric crystal structure gave rise to strong nonlinear optical responses, including second-harmonic generation. This versatile supramolecular assembly approach could be generalized to create various [M(I)X 2 ] − , [M(I)X 3 ] 2− , [M(II)X 4 ] 2− and [M(III)X 5 ] 2− molecular wires, broadening the potential for diverse emission colours and distinct optical properties. This strategy provides a general design principle for constructing supramolecular metal–halide building blocks with diverse optical functionalities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable, predictable and training-free operation of superconducting Bi-2212 Rutherford cable racetrack coils at the wire current density of 1000 A/mm 2

High-temperature superconductors (HTS) could enable high-field magnets stronger than is possible with Nb-Ti and Nb 3 Sn, but two challenges have so far been the low engineering critical current density J E , especially in high-current cables, and the danger of quenches. Most HTS magnets made so far have been made out of REBCO coated conductor. Here we demonstrate stable, reliable and training-quench-free performance of Bi-2212 racetrack coils wound with a Rutherford cable fabricated from wires made with a new precursor powder. These round multifilamentary wires exhibited a record J E up to 950 A/mm 2 at 30 T at 4.2 K. These coils carried up to 8.6 kA while generating 3.5 T at 4.2 K at a J E of 1020 A/mm 2 . Different from the unpredictable training performance of Nb-Ti and Nb 3 Sn magnets, these Bi-2212 magnets showed no training quenches and entered the flux flow state in a stable manner before thermal runaway and quench occurred. Also different from Nb-Ti, Nb 3 Sn, and REBCO magnets for which localized thermal runaways occur at unpredictable locations, the quenches of Bi-2212 magnets consistently occurred in the high field regions over a long conductor length. These characteristics make quench detection simple, enabling safe protection, and suggest a new paradigm of constructing quench-predictable superconducting magnets from Bi-2212.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering Nanocolumnar Defect Configurations for Optimized Vortex Pinning in High Temperature Superconducting Nanocomposite Wires

High temperature superconducting (HTS), coated conductor wires based on nanocomposite films containing self-assembled, insulating BaZrO3 (BZO) nanocolumnar defects have previously been reported to exhibit enhanced vortex pinning. Here, we report on microstructural design via control of BZO nanocolumns density in YBa2Cu3O7- (YBCO)+BZO nancomposite films to achieve the highest critical current density, Jc(H, ,T). X-ray diffraction and microstructural examination shows increasing number density of epitaxial BZO nanocolumns in the highly cube-textured YBCO matrix with increasing nominal BZO additions. Transport property measurement reveals that an increase in BZO content upto 4 vol% is required to sustain the highest pinning and Jc performance as the magnetic field increases. By growing thicker, single-layer nanocomposite films (~4 m) with controlled density of BZO columnar defects, the critical current (Ic) of ~1000 A/cm at 77 K, self-field and the minimum Ic of 455 A/cm at 65 K and 3 T for all magnetic field orientations were obtained. This is the highest Ic reported to date for films on metallic templates which are the basis for the 2nd generation, coated conductor-based HTS wires.

critical current density↗

Influence of fatigue on the nanohardness of NiTiCr-wires

Testing parameters, such as rotational speed and bending radius, have a strong influence on the fatigue life of pseudoelastic NiTi shape-memory alloys during bending rotation fatigue (BRF) experiments [M. F. X. Wagner, Int. J. Mat. Res. 97 (2006), p. 1687-1696. and M. Frotscher, et al., Thermomechanical processing, microstructure and bending rotation fatigue of ultra-fine grained NiTiCr-wires, Proceedings of the International Conference for Shape Memory and Superelastic Technologies (SMST 2007), Tsukuba, Japan, ASM International, (2008), p. 149-158.]. Previous studies showed a decrease in the fatigue life for smaller bending radius (i.e. higher equivalent strain) and larger rotational speed. This observation is associated with an increase of dislocation density, the stabilization of stressinduced martensite during cycling, and an increase of the plateau stresses due to self-heating. In the present study, we examine the influence of these fatigue parameters on the nanohardness and shape recovery of pseudoelastic NiTiCr shape-memory alloy wires by nanoindentation. We show that nanoindentation is a suitable method for the characterization of fatigue-related microstructural changes, which affect the mechanical properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of relativistic electron beam production and transport in high-intensity laser interaction with a wire target by integrated LSP modeling

The results of a numerical study of high-intensity short-pulse laser interaction with wire targets are presented. Fast electron production and transport in solid density plasma is modeled using the implicit hybrid particle-in-cell code LSP [D. R. Welch et al., Phys. Plasmas 13, 063105 (2006)]. These simulations were performed with realistic target size and laser parameters and over times much longer than the laser pulse. Nonlinear interaction processes, i.e., microchanneling and density steepening, have been observed. The spectrum of the relativistic electrons produced has a reduced slope temperature compared to that predicted by ponderomotive scaling. Preformed underdense plasma has been found to bottleneck fast electrons due to the intense magnetic fields generated near the critical surface. In a thin long wire target, the overall propagation length of the fast electrons is about 160 {mu}m; however, surface fields guide a small fraction of electrons to longer distances. These results are in good agreement with the experiments and have demonstrated that the modeling of electron transport relevant to fast ignition can be pursued in an integrated manner.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Fabrication Of Insulating Layer On 4H-SiC By Hot Wire Nitridation

Nitride layer was formed on SiC surface by the hot wire assisted nitridation. The surface was characterized by XPS to discuss the effects of hot wire assistance. The nitride layer comprised of SiO{sub x}N{sub y} and Si{sub 3}N{sub 4}, and the interfacial layer was mainly Si{sub 3}N{sub 4}. Nitrogen concentration in the nitride layer increased with increasing substrate temperature and reaction time.

36 MATERIALS SCIENCE↗

Critical-Current Reduction in Thin Superconducting Wires Due to Current Crowding

We demonstrate experimentally that the critical current in superconducting NbTiN wires is dependent on their geometrical shape, due to current-crowding effects. Geometric patterns such as 90{degrees} corners and sudden expansions of wire width are shown to result in the reduction of critical currents. The results are relevant for single-photon detectors as well as parametric amplifiers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ozone generation by negative direct current corona discharges in dry air fed coaxial wire-cylinder reactors

An analytical study was made in this paper for calculating the ozone generation by negative dc corona discharges. The corona discharges were formed in a coaxial wire-cylinder reactor. The reactor was fed by dry air flowing with constant rates at atmospheric pressure and room temperature, and stressed by a negative dc voltage. The current-voltage characteristics of the negative dc corona discharges formed inside the reactor were measured in parallel with concentration of the generated ozone under different operating conditions. An empirical equation was derived from the experimental results for calculating the ozone concentration generated inside the reactor. The results, that have been recalculated by using the derived equation, have agreed with the experimental results over the whole range of the investigated parameters, except in the saturation range for the ozone concentration. Therefore, the derived equation represents a suitable criterion for expecting the ozone concentration generated by negative dc corona discharges in dry air fed coaxial wire-cylinder reactors under any operating conditions in range of the investigated parameters.

42 ENGINEERING↗

Hard X-ray nanoimaging method using local diffraction from metal wire

A simple hard X-ray imaging method achieving a high spatial resolution is proposed. Images are obtained by scanning a metal wire through the wave field to be measured and rotating the sample to collect data for back projection calculations; the local diffraction occurring at the edges of the metal wire operates as a narrow line probe. In-line holograms of a test sample were obtained with a spatial resolution of better than 100 nm. The potential high spatial resolution of this method is shown by calculations using diffraction theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗