Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WHITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Effects of Si on microstructure and phase transformation at elevated temperatures in ferritic white cast irons

The effects of Si on microstructure and phase transformation at elevated temperature of ferritic 31wt.%Cr-1.1wt.%C white cast irons with up to 3wt.%Si have been studied. Applications of these irons include parts requiring heat resistance at elevated temperature. The irons were produced by sand casting. The microstructure in as-cast condition and after being subjected to high temperature (700 to 1000 °C) was investigated by light microscopy, X-ray diffraction, and electron microscopy. The results revealed that the as-cast microstructure consisted mainly of primary ferrite dendrites and eutectic (ferrite + M{sub 7}C{sub 3}). Si promotes M{sub 7}C{sub 3}-to-M{sub 23}C{sub 6} transformation in the irons subjected to transformation at elevated temperature, but no sigma phase was found. The extent of M{sub 7}C{sub 3}-to-M{sub 23}C{sub 6} transformation increases proportional to the increasing transformation temperature, holding time and Si content in the irons. For the iron with 1.0wt.%Si content after holding at elevated temperatures, martensite was also found, which could be attributed to carbon accretion effects in eutectic ferrite. Si was incorporated in M{sub 23}C{sub 6} such that M{sub 23}C{sub 6} containing Si can show darker contrast under SEM-BEI as compared to M{sub 7}C{sub 3}; this is the opposite to what has been observed for the cases of typical M{sub 23}C{sub 6} and M{sub 23}C{sub 6} containing Mo or W. The results obtained are important to understand the change in properties of ferritic, high chromium irons containing Si subjected to elevated temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Three-dimensional (3D) analysis of white etching bands (WEBs) in AISI M50 bearing steel using automated serial sectioning

Dark etching regions (DER) and white etching bands (WEB) form in the subsurface stressed regions of bearing raceways and rolling elements. Also, “butterfly” formations form around non-metallic inclusions and large carbides. The formation of WEBs, DERs and butterfly are dependent on operating conditions, material alloying elements and heat treatment. The DER, WEB and butterfly formations are well studied in two dimensions (2D). The objective of this study was to analyze WEB formation in three dimensions (3D) that will allow better understanding of material transformation after stress cycling. Three rolling contact fatigue (RCF) tested vacuum induction melted vacuum arc re-melted (VIM-VAR) AISI M50 samples (from a bench test, sub-scale test and commercial gas turbine engine) were analyzed using automated serial sectioning to map WEB networks and a butterfly formation in 3D. Automated serial sectioning and 2D optical microstructural data for 3D reconstructions and analysis was done using a fully automated serial sectioning system – Robo-Met.3D®. 3D analysis was performed using Image-Pro Premier 3D. The data set allowed 3D visualization and analysis of the evolution and propagation of WEB and butterfly in M50 bearing steel, including the positive microscopic identification of a ceramic inclusion that was the source of a WEB.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Synthesis and photoluminescence properties of NaLaMgWO{sub 6}:RE{sup 3+} (RE = Eu, Sm, Tb) phosphor for white LED application

Highlights: ► NaLa{sub 1−x}MgWO{sub 6}:xRE{sup 3+} phosphors were synthesized by solid-state reaction method. ► Compared with Y{sub 2}O{sub 3}:Eu{sup 3+}, NaLaMgWO{sub 6}:Eu{sup 3+} performed better luminescence properties. ► The results demonstrated NaLaMgWO{sub 6} as a suitable host for RE{sup 3+}-doping. -- Abstract: Single phase of NaLa{sub 1−x}MgWO{sub 6}:xRE{sup 3+} (0 < x ≤1) (RE = Eu, Sm, Tb) phosphors were prepared by solid-state reaction method. X-ray diffraction, scanning electron microscopy, the morphology energy-dispersive X-ray spectroscopy, UV–vis diffuse reflectance spectra and photoluminescence were used to characterize the samples. Under the light excitation, NaLaMgWO{sub 6}:Eu{sup 3+}, NaLaMgWO{sub 6}:Sm{sup 3+} and NaLaMgWO{sub 6}:Tb{sup 3+}, phosphors showed the characteristic emissions of Eu{sup 3+} ({sup 5}D{sub 0} → {sup 7}F{sub 4,3,2,1}), Sm{sup 3+} ({sup 4}G{sub 5/2} → {sup 6}H{sub 5/2,7/2,9/2}), and Tb{sup 3+} ({sup 5}D{sub 4} → {sup 7}F{sub 6,5,4,3}), respectively. The intensity of the red emission for Na(La{sub 0.6}Eu{sub 0.4})MgWO{sub 6} is 2.5 times higher than that of (Y{sub 0.95}Eu{sub 0.05}){sub 2}O{sub 3} under blue light irradiation. The quantum efficiencies of the entitled phosphors excited under 394 nm and 464 nm are also investigated and compared with commercial phosphors Y{sub 2}O{sub 3}:Eu{sup 3+}, Sr{sub 2}Si{sub 5}N{sub 8}:Eu{sup 2+} and Y{sub 3}A{sub 5}G{sub 12}:Ce{sup 3+}. The results demonstrated NaLaMgWO{sub 6}:RE{sup 3+} phosphors as potential candidates for white light emitting diode pumped by UV or blue chip.

36 MATERIALS SCIENCE↗
DOE OSTI2013

A novel red emitting phosphor of Eu{sup 3+} doped TTB-type niobate NaSr{sub 2}Nb{sub 5}O{sub 15} for white LEDs

Highlights: ► A novel red phosphor NaSr{sub 2}Nb{sub 5}O{sub 15}:Eu{sup 3+} was synthesized and investigated firstly. ► Crystal structure and characteristic luminescence properties are discussed. ► The charge compensation mechanism is also investigated. ► The intensity of NSN:0.03Eu{sup 3+}, 0.03Li{sup +} is 64.5% of the commercial Y{sub 2}O{sub 3}:Eu{sup 3+}. ► It has good color saturation, the CIE is closed to that of commercial Y{sub 2}O{sub 3}:Eu{sup 3+}. - Abstract: Eu{sup 3+} doped NaSr{sub 2}Nb{sub 5}O{sub 15} series were firstly synthesized by solid-state reaction method. Crystal structure, characteristic luminescence properties as well as charge compensation mechanism are investigated detailedly by X-ray diffraction refinement and photoluminescence spectra measurement. NaSr{sub 2}Nb{sub 5}O{sub 15}:Eu{sup 3+} exhibits strong absorption in near ultraviolet-blue region and intense red emission with CIE chromaticity coordinates (0.638, 0.355) after adding the charge compensation agent upon 398 nm excitation. The integral intensity of NSN:0.03Eu{sup 3+}, 0.03Li{sup +} is 64.5% of the commercial Y{sub 2}O{sub 3}:Eu{sup 3+} and the quantum efficiency is calculated to be 41.5%. The results show that NaSr{sub 2}Nb{sub 5}O{sub 15}:Eu{sup 3+} can be a promising red-emitting phosphor for white LEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Synthesis and photoluminescence properties of Ca{sub 19}Mg{sub 2}(PO{sub 4}){sub 14}:Sm{sup 3+} red phosphor for white light emitting diodes

Highlights: • A novel red phosphor Ca{sub 19}Mg{sub 2}(PO{sub 4}){sub 14}:Sm{sup 3+} was synthesized and investigated firstly. • The structure and characteristic luminescence properties are discussed. • The excellent thermal stability was found and investigated. • It has good color saturation, the CIE is close to that of commercial Y{sub 2}O{sub 3}:Eu{sup 3+}. - Abstract: A series of Sm{sup 3+} doped Ca{sub 19}Mg{sub 2}(PO{sub 4}){sub 14} red phosphors were successfully synthesized. X-ray diffraction analysis indicates that all the samples are single phased. The luminescence property is investigated in detail by measuring their photoluminescence excitation and emission spectra. Ca{sub 19}Mg{sub 2}(PO{sub 4}){sub 14}:Sm{sup 3+} phosphors show strong absorption in 400–410 nm region, which is suitable for application in LEDs. When excited at 403 nm, Ca{sub 19}Mg{sub 2}(PO{sub 4}){sub 14}:Sm{sup 3+} phosphor can emit red emission with CIE chromaticity coordinates (0.615, 0.384). The optimal doping concentration of Sm{sup 3+} doped Ca{sub 19}Mg{sub 2}(PO{sub 4}){sub 14} is measured to be 0.02. The thermal quenching property is also measured and compared with the commercial red phosphor Y{sub 2}O{sub 3}:Eu{sup 3+} (Topstar, TXC-RIA). The results indicate Ca{sub 19}Mg{sub 2}(PO{sub 4}){sub 14}:Sm{sup 3+} phosphors have potential to serve as a red phosphor for white LEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Luminescence properties of Ca{sub 14}Mg{sub 2}(SiO{sub 4}){sub 8}:Eu{sup 2+} from various Eu{sup 2+} sites for white-light-emitting diodes

Ca{sub 14}Mg{sub 2}(SiO{sub 4}){sub 8}:Eu{sup 2+} phosphors were synthesized by solid-state reaction method, and their luminescence properties were investigated. In the emission spectra, several overlapping emission bands originating from various Eu{sup 2+} sites were found. Eu{sup 2+} in Ca{sub 14}Mg{sub 2}(SiO{sub 4}){sub 8} exhibits green emission around 506 nm, and the sample doped with 0.1 mol% Eu{sup 2+} shows the strongest brightness under 365 nm excitation with the quantum efficiency of 63.6%. In the excitation spectra, strong and broad excitation bands from 250 to 450 nm were observed, which could well match with the emission wavelength of the light-emitting diode chip. The fabrication test on the InGaN chip indicates the Ca{sub 14}Mg{sub 2}(SiO{sub 4}){sub 8}:Eu{sup 2+} phosphor could be promising candidate for white light-emitting diodes.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Energy transfer and tunable luminescence of Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} phosphors for white LED applications

Highlights: • Iso-structural garnet-type Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} solid solution were synthesized. • Efficient energy transfer from [VO{sub 4}]{sup 3−} to Eu{sup 3+} ions in this phosphor is observed obviously. • Tuning the Y/Eu ratio generates the varied hues from yellowish-green to reddish-orange. • This kind of phosphor can be potentially used in UV pumped LEDs. - Abstract: A series of solid-solution phosphors Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} were prepared using solution combustion reaction. X-ray diffraction studies verified the formation of single phase Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} with garnet structure. Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} phosphors show not only a broad emission band with a maximum at 510 nm due to the [VO{sub 4}]{sup 3−} group but also several sharp emission lines due to the Eu{sup 3+} ions. The energy transfer from [VO{sub 4}]{sup 3−} to Eu{sup 3+} was discussed on the base of the spectral analysis. The color-tunable emissions of the Na{sub 2}(Y,Eu)Mg{sub 2}V{sub 3}O{sub 12} phosphor as a function of Y/Eu ratio are realized by continuously generating the varied hues from yellowish-green to reddish-orange. This indicates that the obtained phosphor may have potential applications in the field of UV-based white LEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Blue photons excited highly chromatic red light emitting K3La(PO4)2:Pr3+ phosphors for white light emitting diodes

Highlights: • K{sub 3}La(PO{sub 4}){sub 2}:Pr{sup 3+} phosphors were investigated as an alternative for red light. • Highly chromatic red emission was realized upon blue excitation. • The phosphor has high color purity ∼ 97.8% and yield ∼27%. - Abstract: Highly chromatic blue photons excited red emitting K{sub 3}La(PO{sub 4}){sub 2}:Pr{sup 3+} (0–1.8 mol%) phosphors were synthesized by solution combustion method. The resulted phosphors showed peanut like morphology and had a monoclinic phase with space group P2{sub 1}/m. The photoluminescence studies disclosed that the phosphor emits red light due to the {sup 1}D{sub 2} → {sup 3}H{sub 4} and {sup 1}D{sub 2} → {sup 3}H{sub 5} transition of the Pr{sup 3+} ions under blue photons excitation. The optimal concentration for the Pr{sup 3+} ions were optimized to be 1.2 mol% after which concentration quenching occurred. Dipole-dipole interaction among the dopant ions was found to be responsible for the concentration quenching. X-ray photoelectron spectroscopy results depicted that Pr was present in the (+3) valance state in the phosphor. The photometric results suggest that the phosphor with a high color purity ∼ 97.8% and enough quantum yield ∼27% could be an eventual choice as the red component for white light emitting diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

White LED based on CsPbBr3 nanocrystal phosphors via a facile two-step solution synthesis route

Highlights: • The work shows a simple and effective strategy to synthesize perovskite materials. • A LED with CsPbBr{sub 3} nanocrystals as green phosphors was fabricated. • Notable stability of the CsPbBr{sub 3} nanocrystals was verified. - Abstract: All-inorganic CsPbBr{sub 3} perovskite nanocrystals with mean size of ∼300 nm were synthesized via a facile two-step solution synthesis route. High-resolution transmission electron microscopy and X-ray diffraction characterizations confirm the as-prepared CsPbBr{sub 3} nanoparticles are single-crystals with good crystallinity, although a CsPb{sub 2}Br{sub 5} impure phase also exists in the final product. Power-/temperature-dependent and time-resolved photoluminescence measurements reveal the notable and stable excitonic emission feature of these CsPbBr{sub 3} nanocrystals. As a proof-of-concept demonstration, a LED with p-GaN/n-ZnO heterojunction as blue-violet excitation chip and CsPbBr{sub 3} nanocrystals as green phosphors, was fabricated and a white electroluminescence was achieved from this perovskite nanocrystals decorated LED.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Two-step synthesis of a novel red-emitting Ba2ZrF8:Mn4+ phosphor for warm white light-emitting diodes

Highlights: • A novel red-emitting Ba{sub 2}ZrF{sub 8}:Mn{sup 4+} was prepared by two-step method at low temperature. • The phosphor shows an intense red emission under 460 nm excitation matching well with blue LED chip. • The energy transfer between Mn{sup 4+} was confirmed to be electric dipole-quadrupole interaction. - Abstract: A novel red-emitting Ba{sub 2}ZrF{sub 8}: Mn{sup 4+} phosphor was prepared by two-step method at low temperature, where critical precursor K{sub 2}MnF{sub 6} was prepared first by the reduction of KMnO{sub 4} using H{sub 2}O2 as reducer. The crystal structure and morphology of the phosphor was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS), showing single phase product. Luminescent properties of the phosphor were investigated by photoluminescence spectroscopy (PL) and decay curves. The molar ratio of KMnO{sub 4}: KHF{sub 2} was confirmed to play the key role in improving the luminous efficiency. More importantly, the phosphor exhibits a broadband excitation from 300 to 520 nm due to {sup 4}A{sub 2g}→{sup 4}T{sub 1g} and {sup 4}A{sub 2g}→{sup 4}T{sub 2g} transition of Mn{sup 4+}, matching well with blue LED chips. Under 465 nm excitation, intense red emission at around 630 nm with high color purity is achieved, suggesting the red-emitting phosphor has great potential for white light-emitting diodes (wLEDs).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Comparative transcriptomics of CAZy enzymes in white- and brown-rot agaricomycetes: Evolutionary insights into lignocellulose degradation and the relevance of GH16 glycoside hydrolase functional divergence

White-rot and brown-rot fungi (WRF and BRF, respectively) decompose lignocellulose, the main structural component of plant biomass, through distinct mechanisms. This study examines the transcriptomic responses of three WRF species (Pleurotus ostreatus, Phanerochaete chrysosporium, and Heterobasidion irregulare) and two BRF species (Fomitopsis schrenkii and Rhodonia placenta) grown on poplar wood (W) and glucose (G) as sole carbon sources. RNA-seq analysis revealed upregulation of carbohydrate-active enzymes (CAZymes) linked to lignocellulose degradation. WRF displayed a broader enzymatic repertoire, whereas BRF employed a more selective approach. Among these responses, GH16 glycoside hydrolases were consistently upregulated across all species, including BRF. Since GH16 enzymes are involved in both plant hemicellulose modification and cell wall remodeling, their wood-induced expression may reflect multiple processes rather than a single conserved wood-decay mechanism. Structural and phylogenetic analyses revealed species-specific divergence, consistent with potential functional specialization. These findings broaden our understanding of fungal enzymatic strategies and highlight GH16 enzymes as candidates for further study. Beyond the immediate context of wood decay, this work has broader implications for fungal ecology, evolutionary biology, and biotechnological applications such as biomass conversion and sustainable bioenergy.

Fungal ecological strategies↗
DOE OSTI2023

Optimal white-noise stochastic forcing for linear models of turbulent channel flow

In the present study an optimisation problem is formulated to determine the forcing of an eddy-viscosity-based linearised Navier–Stokes model in channel flow at $Re_\tau \approx 5200$ ( $Re_\tau$ is the friction Reynolds number), where the forcing is white-in-time and spatially decorrelated. The objective functional is prescribed such that the forcing drives a response to best match a set of velocity spectra from direct numerical simulation (DNS), as well as remaining sufficiently smooth. Strong quantitative agreement is obtained between the velocity spectra from the linear model with optimal forcing and from DNS, but only qualitative agreement between the Reynolds shear stress co-spectra from the model and DNS. The forcing spectra exhibit a level of self-similarity, associated with the primary peak in the velocity spectra, but they also reveal a non-negligible amount of energy spent in phenomenologically mimicking the non-self-similar part of the velocity spectra associated with energy cascade. By exploiting linearity, the effect of the individual forcing components is assessed and the contributions from the Orr mechanism and the lift-up effect are also identified. Finally, the effect of the strength of the eddy viscosity on the optimisation performance is investigated. The inclusion of the eddy viscosity diffusion operator is shown to be essential in modelling of the near-wall features, while still allowing the forcing of the self-similar primary peak. In particular, reducing the strength of the eddy viscosity results in a considerable increase in the near-wall forcing of wall-parallel components.

Mechanics↗
DOE OSTI2025

Vibrational Signatures of Unrealized Phosphorus Suboxide Intermediates in White Phosphorus Oxidation Reactions

White phosphorus ignition notoriously produces the phosphoric acid anhydride P 4 O 10 , yet the intermediate oxidation steps remain undetermined. Here, we report the first geometric and vibrational characterization of two P 4 O 2 isomers, P 3 OPO and P 3 PO 2 , and substantiate a previously proposed cyclic P 4 O 2 isomer. We formally assign the infrared bands observed by Andrews and Mielke at 898 and 891 cm −1 to the antisymmetric P− O−P vibrations of P 3 OPO species. Additional bands corresponding to terminal P=O and −PO 2 stretches of P 3 OPO and P 3 PO 2 discussed herein also went unrecognized due to the peculiar bonding of P 4 O 2 species compared to oxo-bridged P 4 O x (x = 3−6) species. Sequential addition of oxygen atoms to the P 4 tetrahedron appears to form P 3 OPO and P 3 PO 2 , while cyclic P 4 O 2 is formed from P 2 O dimerization. CCSD(T) geometries, CCSD(T) + MP2[δVPT2] fundamental frequencies, and enthalpies of formation extrapolated using focal-point analysis are reported. The predicted enthalpies of formation relative to tetrahedral P 4 plus 3 Σ g − O 2 for bent-P 3 OPO, extended-P 3 OPO, P 3 PO 2 , and cyclic-P 4 O 2 are −93, −88, −85, and −63 kcal mol −1 , respectively.

Molecular structure↗
DOE OSTI2023

Modeling the Charge and Exciton Distributions in Phosphorescent White Organic Light-Emitting Diodes

A comprehensive numerical model is developed to quantitatively analyze the charge and exciton distributions in phosphorescent white organic light emitting diodes (WOLEDs). The model encompasses bipolar charge drift-diffusion transport with doping-dependent charge mobilities, field-dependent charge hopping across multiple interfaces, exciton generation, diffusion, energy transfer, radiative decay, and non-radiative exciton annihilation. The model is validated by direct measurement of the exciton distribution in monochromatic phosphorescent OLEDs. It is then applied to complex, multilayer WOLEDs where it is used to accurately predict their intensity and current-dependent spectral shifts. The magnitudes of different exciton loss channels in WOLEDs are calculated and quantitatively compared. This model provides an alternative for the many experimental iterations commonly used to optimize the color balance of complex OLEDs. In this context, the model inspired the addition of a hole blocking layer in the WOLED to balance the charge conduction and reduce spectral shifts – a design that is verified by experiment.

42 ENGINEERING↗
DOE OSTI2012

Rapid Microwave Preparation of Highly Efficient Ce[superscript 3+]-Substituted Garnet Phosphors for Solid State White Lighting

Ce{sup 3+}-substituted aluminum garnet compounds of yttrium (Y{sub 3}Al{sub 5}O{sub 12}) and lutetium (Lu{sub 3}Al{sub 5}O{sub 12}) - both important compounds in the generation of (In,Ga)N-based solid state white lighting - have been prepared using a simple microwave heating technique involving the use of a microwave susceptor to provide the initial heat source. Carbon used as the susceptor additionally creates a reducing atmosphere around the sample that helps stabilize the desired luminescent compound. High quality, phase-pure materials are prepared within a fraction of the time and using a fraction of the energy required in a conventional ceramic preparation; the microwave technique allows for a reduction of about 95% in preparation time, making it possible to obtain phase pure, Ce{sup 3+}-substituted garnet compounds in under 20 min of reaction time. It is estimated that the overall reduction in energy compared with ceramic routes as practiced in the lab is close to 99%. Conventionally prepared material is compared with material prepared using microwave heating in terms of structure, morphology, and optical properties, including quantum yield and thermal quenching of luminescence. Finally, the microwave-prepared compounds have been incorporated into light-emitting diode 'caps' to test their performance characteristics in a real device, in terms of their photon efficiency and color coordinates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Conjugation- and Aggregation-Directed Design of Covalent Organic Frameworks as White-Light-Emitting Diodes

2D covalent organic frameworks (COFs) have emerged as a promising class of organic luminescent materials due to their structural diversity, which allows the systematic tuning of organic building blocks to optimize emitting properties. However, a significant knowledge gap exists between the design strategy and the fundamental understanding of the key structural parameters that determine their photophysical properties. Here, in this work, we report two highly emissive sp 2 -C-COFs and the direct correlation of the structure (conjugation and aggregation) with their light absorption/emission, charge transfer (CT), and exciton dynamics, the key properties that determine their function as luminescent materials. We show that white light can be obtained by simply coating COFs on an LED strip or mixing the two COFs. Using the combination of time-resolved absorption and emission spectroscopy as well as computational prediction, we show that the planarity, conjugation, orientation of the dipole moment, and interlayer aggregation not only determine the light-harvesting ability of COFs but also control the exciton relaxation pathway and photoluminescent quantum yield.

14 SOLAR ENERGY↗
DOE OSTI2018

Structural Diversity in White-Light-Emitting Hybrid Lead Bromide Perovskites

Hybrid organic–inorganic halide perovskites are under intense investigations because of their astounding physical properties and promises for optoelectronics. Lead bromide and chloride perovskites exhibit intrinsic white-light emission believed to arise from self-trapped excitons (STEs). Here, we report a series of new structurally diverse hybrid lead bromide perovskites that have broad-band emission at room temperature. They feature Pb/Br structures which vary from 1D face-sharing structures to 3D corner- and edge-sharing structures. Through single-crystal X-ray diffraction and low-frequency Raman spectroscopy, we have identified the local distortion level of the octahedral environments of Pb 2+ within the structures. The band gaps of these compounds range from 2.92 to 3.50 eV, following the trend of “corner-sharing < edge-sharing < face-sharing”. Density functional theory calculations suggest that the electronic structure is highly dependent on the connectivity mode of the PbBr 6 octahedra, where the edge- and corner-sharing 1D structure of (2,6-dmpz) 3 Pb 2 Br 10 exhibits more disperse bands and smaller band gap (2.49 eV) than the face-sharing 1D structure of (hep)PbBr 3 (3.10 eV). Using photoemission spectroscopy, we measured the energies of the valence band of these compounds and found them to remain almost constant, while the energy of conduction bands varies. Temperature-dependent PL measurements reveal that the 2D and 3D compounds have narrower PL emission at low temperature (~5 K), whereas the 1D compounds have both free exciton emission and STE emission. Furthermore, the 1D compound (2,6-dmpz) 3 Pb 2 Br 10 has the highest photoluminescence quantum yield of 12%, owing to its unique structure that allows efficient charge carrier relaxation and light emission.

14 SOLAR ENERGY↗
DOE OSTI2021

6 nm super-resolution optical transmission and scattering spectroscopic imaging of carbon nanotubes using a nanometer-scale white light source

Abstract Optical transmission and scattering spectroscopic microscopy at the visible and adjacent wavelengths denote one of the most informative and inclusive characterization methods in material research. Unfortunately, restricted by the diffraction limit of light, it cannot resolve the nanoscale variation in light absorption and scattering, diagnostics of the local inhomogeneity in material structure and properties. Moreover, a large quantity of nanomaterials has anisotropic optical properties that are appealing yet hard to characterize through conventional optical methods. There is an increasing demand to extend the optical hyperspectral imaging into the nanometer length scale. In this work, we report a super-resolution hyperspectral imaging technique that uses a nanoscale white light source generated by superfocusing the light from a tungsten-halogen lamp to simultaneously obtain optical transmission and scattering spectroscopic images. A 6-nm spatial resolution in the visible to near-infrared wavelength regime (415–980 nm) is demonstrated on an individual single-walled carbon nanotube (SW-CNT). Both the longitudinal and transverse optical electronic transitions are measured, and the SW-CNT chiral indices can be identified. The band structure modulation in a SW-CNT through strain engineering is mapped.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗